is there any way to update the Mecool M8S PRO W to atv9 ?? I have tried using the box with other roms other than the stock without any success.
I have tried the RedPoisonATV S905W and some others and it always stays at 7% .. or an error appears when using the usb_burning_tool :/
I have tried different cables and different PCs .. and with different roms but the error always appears.
I tried to install the ATV9 version of Vasily Shevchuk (
) it has a mecool m8s pro w .. working with android 9 but the same thing happens to me, it stays stuck at 7% or some other error ..
I also tried using Aidan's ROM but it didn't work either
PSD: curiously, the only rom that can accept this box is the M8S_PLUS_W 20180622.img (the image that serves to revive the box after a failed update) but I don't accept another .img: / any ideas??? ...
or should i just throw the tvbox in the trash
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My M8S PRO W was bricked after a wrong flash.now i flash it with usb burning tool i have a message :
Romcode/Initialize DDR/Read initialize status/USB Control setup errormy mother board is rev2.1 and i can not flash it after many flash rom.please help
clever9971 said:
My M8S PRO W was bricked after a wrong flash.now i flash it with usb burning tool i have a message :
Romcode/Initialize DDR/Read initialize status/USB Control setup errormy mother board is rev2.1 and i can not flash it after many flash rom.please help
Click to expand...
Click to collapse
download this files;
rom: geekbuying.mediafire.com/file/ygmxy4lksfy324t/M8S_PLUS_W_20180622.img/file
Легіон Upload : Smart-TV-Box : MECOOL-M8S-PRO-W : 20180802
Upload на Легіоні. Категория для спутниковых ресиверов «20180802»: M8SPRO-W-USB-upgrade manual.doc, M8S_PRO_W-NHG47L-20180802.182556.V0213.zip, M8S_PRO_W-ota-20180802.182556.V0213.zip
legion.name
in this second link download M8S_PRO_W-ota-20180312.181951.V0213.zip
now:
(burn the rom with usb burning tool, this room is only for unbrick) after install the system initialize in Chinese menu, press the play / pause button on your remote control..
until the Chinese menu disappears. and the normal menu appears
now the second step (upgrade):
You must try which one is useful .. sometimes the upgrade does not work from the sd card .. then you should do it with a usb) put the file (M8S_PRO_W-ota-20180312.181951.V0213.zip) .. now the second step (update) .. in the android system search the update option .. check both options .. and start the update ..
the tv box will restart .. and install the files ... at the end .. (select reboot system now) .. and voila.
y M8S PRO W was bricked after a wrong flash.now i flash it with usb burning tool i have a message :
romcode/initialize ddr/read initialize status/error result
my mother board is rev2.1 and i can not flash it after many flash rom.please help
here is my motherboard
[15:27:37 510][Global][Inf]--Get system Info :
[15:27:37 510][Global][Inf]--Windows Version: Microsoft Windows 10, Bit: 64
[15:27:37 520][Global][Inf]--Scan usb device
[15:27:37 520][Global][Inf]--Aml scan WorldCup Device
[15:27:37 521][Global][Inf]--Host: Intel(R) 8/C220 USB EHCI N° 1 - 8C26
[15:27:37 521][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_8c26&subsys_06121028&rev_04#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[15:27:37 521][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&353bfc3e&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:27:37 585][Global][Inf]-------->[Port0]USB#VID_8087&PID_8000#5&23606a80&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:27:37 585][Global][Inf]---------->[Port0]NoDeviceConnected
[15:27:37 585][Global][Inf]---------->[Port1]NoDeviceConnected
[15:27:37 585][Global][Inf]---------->[Port2]NoDeviceConnected
[15:27:37 585][Global][Inf]---------->[Port3]NoDeviceConnected
[15:27:37 585][Global][Inf]---------->[Port4]NoDeviceConnected
[15:27:37 585][Global][Inf]---------->[Port5]NoDeviceConnected
[15:27:37 585][Global][Inf]-------->[Port1]NoDeviceConnected
[15:27:37 585][Global][Inf]--Host: Intel(R) 8/C220 USB EHCI n° 2 - 8C2D
[15:27:37 585][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_8c2d&subsys_06121028&rev_04#3&11583659&0&d0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[15:27:37 585][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&12e72867&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:27:37 648][Global][Inf]-------->[Port0]USB#VID_8087&PID_8008#5&1ffa69d&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:27:37 648][Global][Inf]---------->[Port0]NoDeviceConnected
[15:27:37 648][Global][Inf]---------->[Port1]NoDeviceConnected
[15:27:37 648][Global][Inf]---------->[Port2]NoDeviceConnected
[15:27:37 648][Global][Inf]---------->[Port3]NoDeviceConnected
[15:27:37 648][Global][Inf]-------->[Port1]NoDeviceConnected
[15:27:37 650][Global][Inf]--Host: Contrôleur d’hôte compatible xHCI USB
[15:27:37 650][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_8c31&subsys_06121028&rev_04#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[15:27:37 650][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&352e7820&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:27:37 650][Global][Inf]-------->[Port0]NoDeviceConnected
[15:27:37 652][Global][Inf]-------->[Port1]Other device
[15:27:37 652][Global][Inf]-------->[Port2]NoDeviceConnected
[15:27:37 653][Global][Inf]-------->[Port3]Other device
[15:27:37 653][Global][Inf]-------->[Port4]NoDeviceConnected
[15:27:37 653][Global][Inf]-------->[Port5]NoDeviceConnected
[15:27:37 653][Global][Inf]-------->[Port6]NoDeviceConnected
[15:27:37 653][Global][Inf]-------->[Port7]NoDeviceConnected
[15:27:37 653][Global][Inf]-------->[Port8]Other device
[15:27:37 653][Global][Inf]-------->[Port9]NoDeviceConnected
[15:27:37 653][Global][Err]-------->[Port10]Error connect status 3
[15:27:37 653][Global][Err]-------->[Port11]Error connect status 3
[15:27:37 653][Global][Err]-------->[Port12]Error connect status 3
[15:27:37 653][Global][Err]-------->[Port13]Error connect status 3
[15:27:37 653][Global][Err]-------->[Port14]Error connect status 3
[15:27:37 653][Global][Inf]-------->[Port15]NoDeviceConnected
[15:27:37 653][Global][Inf]-------->[Port16]NoDeviceConnected
[15:27:37 653][Global][Inf]--Scan USB host controller complete
[15:27:37 653][Global][Inf]--Update data center with HubMap
[15:27:46 104][Global][Inf]--OpenImg C:\Users\GI\Desktop\Nouveau dossier (10)\aml_upgrade_package.img
[15:27:51 626][Global][Inf]--check img crc success!
[15:27:51 627]Parse platform.conf
[15:27:51 629][Global][Inf]--Parsing burning package
[15:27:51 629][Global][Inf]--Load configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp
[15:27:51 629][Global][Inf]--Parse burning configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp\burn_config.xml
[15:27:51 631][Global][Inf]--Get burning key
[15:27:59 636][Global][Inf]--User click start button
[15:27:59 637][Global][Inf]--SetErase
[15:27:59 637][Global][Inf]--Enable burning 1
[15:27:59 637][Global][Inf]--Scan usb device
[15:27:59 637][Global][Inf]--Aml scan WorldCup Device
[15:27:59 638][Global][Inf]--Host: Intel(R) 8/C220 USB EHCI N° 1 - 8C26
[15:27:59 638][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_8c26&subsys_06121028&rev_04#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[15:27:59 639][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&353bfc3e&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:27:59 702][Global][Inf]-------->[Port0]USB#VID_8087&PID_8000#5&23606a80&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:27:59 702][Global][Inf]---------->[Port0]NoDeviceConnected
[15:27:59 702][Global][Inf]---------->[Port1]NoDeviceConnected
[15:27:59 702][Global][Inf]---------->[Port2]NoDeviceConnected
[15:27:59 702][Global][Inf]---------->[Port3]NoDeviceConnected
[15:27:59 702][Global][Inf]---------->[Port4]NoDeviceConnected
[15:27:59 702][Global][Inf]---------->[Port5]NoDeviceConnected
[15:27:59 702][Global][Inf]-------->[Port1]NoDeviceConnected
[15:27:59 703][Global][Inf]--Host: Intel(R) 8/C220 USB EHCI n° 2 - 8C2D
[15:27:59 704][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_8c2d&subsys_06121028&rev_04#3&11583659&0&d0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[15:27:59 704][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&12e72867&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:27:59 766][Global][Inf]-------->[Port0]USB#VID_8087&PID_8008#5&1ffa69d&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:27:59 766][Global][Inf]---------->[Port0]NoDeviceConnected
[15:27:59 766][Global][Inf]---------->[Port1]NoDeviceConnected
[15:27:59 766][Global][Inf]---------->[Port2]NoDeviceConnected
[15:27:59 766][Global][Inf]---------->[Port3]NoDeviceConnected
[15:27:59 766][Global][Inf]-------->[Port1]NoDeviceConnected
[15:27:59 767][Global][Inf]--Host: Contrôleur d’hôte compatible xHCI USB
[15:27:59 767][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_8c31&subsys_06121028&rev_04#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[15:27:59 767][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&352e7820&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:27:59 767][Global][Inf]-------->[Port0]NoDeviceConnected
[15:27:59 767][Global][Inf]-------->[Port1]Other device
[15:27:59 767][Global][Inf]-------->[Port2]NoDeviceConnected
[15:27:59 768][Global][Inf]-------->[Port3]Other device
[15:27:59 768][Global][Inf]-------->[Port4]NoDeviceConnected
[15:27:59 768][Global][Inf]-------->[Port5]NoDeviceConnected
[15:27:59 768][Global][Inf]-------->[Port6]NoDeviceConnected
[15:27:59 768][Global][Inf]-------->[Port7]NoDeviceConnected
[15:27:59 768][Global][Inf]-------->[Port8]Other device
[15:27:59 768][Global][Inf]-------->[Port9]NoDeviceConnected
[15:27:59 768][Global][Err]-------->[Port10]Error connect status 3
[15:27:59 768][Global][Err]-------->[Port11]Error connect status 3
[15:27:59 768][Global][Err]-------->[Port12]Error connect status 3
[15:27:59 768][Global][Err]-------->[Port13]Error connect status 3
[15:27:59 768][Global][Err]-------->[Port14]Error connect status 3
[15:27:59 768][Global][Inf]-------->[Port15]NoDeviceConnected
[15:27:59 768][Global][Inf]-------->[Port16]NoDeviceConnected
[15:27:59 768][Global][Inf]--Scan USB host controller complete
[15:27:59 768][Global][Inf]--Update data center with HubMap
[15:28:04 154][Global][Inf]--Catch DBT_DEVICEARRIVAL
[15:28:04 154][Global][Inf]--Scan usb device
[15:28:04 154][Global][Inf]--Aml scan WorldCup Device
[15:28:04 155][Global][Inf]--Host: Intel(R) 8/C220 USB EHCI N° 1 - 8C26
[15:28:04 155][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_8c26&subsys_06121028&rev_04#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[15:28:04 155][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&353bfc3e&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:28:04 219][Global][Inf]-------->[Port0]USB#VID_8087&PID_8000#5&23606a80&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:28:04 219][Global][Inf]---------->[Port0]NoDeviceConnected
[15:28:04 219][Global][Inf]---------->[Port1]NoDeviceConnected
[15:28:04 219][Global][Inf]---------->[Port2]NoDeviceConnected
[15:28:04 219][Global][Inf]---------->[Port3]NoDeviceConnected
[15:28:04 219][Global][Inf]---------->[Port4]NoDeviceConnected
[15:28:04 219][Global][Inf]---------->[Port5]NoDeviceConnected
[15:28:04 219][Global][Inf]-------->[Port1]NoDeviceConnected
[15:28:04 219][Global][Inf]--Host: Intel(R) 8/C220 USB EHCI n° 2 - 8C2D
[15:28:04 219][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_8c2d&subsys_06121028&rev_04#3&11583659&0&d0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[15:28:04 219][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&12e72867&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:28:04 282][Global][Inf]-------->[Port0]USB#VID_8087&PID_8008#5&1ffa69d&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:28:04 282][Global][Inf]---------->[Port0]NoDeviceConnected
[15:28:04 282][Global][Inf]---------->[Port1]NoDeviceConnected
[15:28:04 282][Global][Inf]---------->[Port2]NoDeviceConnected
[15:28:04 282][Global][Inf]---------->[Port3]NoDeviceConnected
[15:28:04 282][Global][Inf]-------->[Port1]NoDeviceConnected
[15:28:04 283][Global][Inf]--Host: Contrôleur d’hôte compatible xHCI USB
[15:28:04 283][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_8c31&subsys_06121028&rev_04#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[15:28:04 283][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&352e7820&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:28:04 283][Global][Inf]-------->[Port0]NoDeviceConnected
[15:28:04 283][Global][Inf]-------->[Port1]Other device
[15:28:04 283][Global][Inf]-------->[Port2]NoDeviceConnected
[15:28:04 284][Global][Inf]-------->[Port3]Other device
[15:28:04 284][Global][Inf]-------->[Port4]NoDeviceConnected
[15:28:04 284][Global][Inf]-------->[Port5]NoDeviceConnected
[15:28:04 284][Global][Inf]-------->[Port6]NoDeviceConnected
[15:28:04 284][Global][Inf]-------->[Port7]NoDeviceConnected
[15:28:04 284][Global][Inf]-------->[Port8]Other device
[15:28:04 284][Global][Inf]-------->[Port9]\\?\usb#vid_1b8e&pid_c003#5&25587c9f&0&10#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[15:28:04 284][Global][Err]-------->[Port10]Error connect status 3
[15:28:04 284][Global][Err]-------->[Port11]Error connect status 3
[15:28:04 284][Global][Err]-------->[Port12]Error connect status 3
[15:28:04 285][Global][Err]-------->[Port13]Error connect status 3
[15:28:04 285][Global][Err]-------->[Port14]Error connect status 3
[15:28:04 285][Global][Inf]-------->[Port15]NoDeviceConnected
[15:28:04 285][Global][Inf]-------->[Port16]NoDeviceConnected
[15:28:04 285][Global][Inf]--Scan USB host controller complete
[15:28:04 285][Global][Inf]--Update data center with HubMap
[15:28:04 285][Global][Inf]--Insert new hub5
[15:28:04 285][Global][Inf]--Update hub5 device data
[15:28:04 285][Global][Inf]--Update HUB5-1
[15:28:04 285][HUB5-1][Inf]--Update device path
[15:28:04 285][Global][Inf]--Update HUB5-2
[15:28:04 285][HUB5-2][Inf]--Update device path
[15:28:04 285][Global][Inf]--Update HUB5-3
[15:28:04 285][HUB5-3][Inf]--Update device path
[15:28:04 285][Global][Inf]--Update HUB5-4
[15:28:04 285][HUB5-4][Inf]--Update device path
[15:28:04 285][Global][Inf]--Update HUB5-5
[15:28:04 285][HUB5-5][Inf]--Update device path
[15:28:04 285][Global][Inf]--Update HUB5-6
[15:28:04 285][HUB5-6][Inf]--Update device path
[15:28:04 285][Global][Inf]--Update HUB5-7
[15:28:04 285][HUB5-7][Inf]--Update device path
[15:28:04 285][Global][Inf]--Update HUB5-8
[15:28:04 285][HUB5-8][Inf]--Update device path
[15:28:04 285][Global][Inf]--Update HUB5-9
[15:28:04 285][HUB5-9][Inf]--Update device path
[15:28:04 285][Global][Inf]--Update HUB5-10 \\?\usb#vid_1b8e&pid_c003#5&25587c9f&0&10#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[15:28:04 285][HUB5-10][Inf]--Update device path
[15:28:04 285][Global][Inf]--Begin thread for HUB5-10
[15:28:04 285][Global][Inf]--Update HUB5-11
[15:28:04 285][Global][Inf]--Burning thread HUB5-10 start
[15:28:04 285][HUB5-11][Inf]--Update device path
[15:28:04 285][Global][Inf]--Update HUB5-12
[15:28:04 285][HUB5-12][Inf]--Update device path
[15:28:04 285][Global][Inf]--Burning thread HUB5-10 begin run
[15:28:04 285][Global][Inf]--Update HUB5-13
[15:28:04 285][HUB5-13][Inf]--Update device path
[15:28:04 285][Global][Inf]--Update HUB5-14
[15:28:04 285][HUB5-14][Inf]--Update device path
[15:28:04 285][Global][Inf]--Update HUB5-15
[15:28:04 285][HUB5-15][Inf]--Update device path
[15:28:04 285][Global][Inf]--Update HUB5-16
[15:28:04 285][HUB5-16][Inf]--Update device path
[15:28:04 285][Global][Inf]--Update HUB5-17
[15:28:04 285][HUB5-17][Inf]--Update device path
[15:28:04 285][HUB5-10][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&25587c9f&0&10#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x000002fc
[15:28:04 286][Global][Inf]--Add Hub5: \\.\USB#ROOT_HUB30#4&352e7820&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} to m_HubDeviceDataVector
[15:28:04 347][HUB5-10][Inf]--CloneImageProxy
[15:28:04 347][Global][Inf]--OpenImg C:\Users\GI\Desktop\Nouveau dossier (10)\aml_upgrade_package.img
[15:28:04 347][HUB5-10][Inf]--Connect path=Contrôleur d’hôte compatible xHCI USB/P0/P9
[15:28:04 347][HUB5-10][Inf]--Start burning...
[15:28:04 410][HUB5-10][Inf]--------------ERASE BOOTLOADER------------
[15:28:04 920][HUB5-10][Inf]--2-4-0-0
[15:28:04 920][HUB5-10][Inf]-------------Download DDR.USB-----------
[15:28:04 920][HUB5-10][Inf]--2-4-0-0
[15:28:04 920][HUB5-10][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[15:28:05 428][HUB5-10][Inf]--Control write pll reg1 0xd9000000:0x00005183
[15:28:05 942][HUB5-10][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[15:28:06 451][HUB5-10][Inf]--Control write pll reg1 0xd9000000:0x00005183
[15:28:06 956][HUB5-10][Inf]--Write initial succeed
[15:28:06 956][HUB5-10][Inf]--Upload encrypt at 0xc8100228
[15:28:06 956][HUB5-10][Inf]--ulValue = 0xadfc318c
[15:28:06 956][HUB5-10][Inf]--Read encrypt value succeed
[15:28:06 963][HUB5-10][Inf]--Transfer complete
[15:28:06 963][HUB5-10][Inf]--Run at address 0xd9000000
[15:28:06 963][HUB5-10][Inf]--RunInRam succeed
[15:28:06 975][HUB5-10][Inf]--2-2-0-8-0-1-0-0
[15:28:06 975][HUB5-10][Inf]--CheckFileRunState return 8
[15:28:06 975][HUB5-10][Inf]--Run at address 0xd900c000
[15:28:06 975][HUB5-10][Inf]--RunInRam succeed
[15:28:07 313][HUB5-10][Err]--ReadLargeMemCMD failed ret = -5
[15:28:07 313][HUB5-10][Err]--ReadPara failed
[15:28:07 321][Global][Inf]--Catch DBT_DEVICEREMOVECOMPLETE
[15:28:07 321][Global][Inf]--Scan usb device
[15:28:07 321][Global][Inf]--Aml scan WorldCup Device
[15:28:07 322][Global][Inf]--Host: Intel(R) 8/C220 USB EHCI N° 1 - 8C26
[15:28:07 322][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_8c26&subsys_06121028&rev_04#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[15:28:07 322][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&353bfc3e&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:28:07 366][HUB5-10][Err]--[0x10105002]Romcode/Initialize DDR/Read initialize status/USB Control setup error
[15:28:07 367][HUB5-10][Inf]--Close device handle 0x000002fc
[15:28:07 385][Global][Inf]-------->[Port0]USB#VID_8087&PID_8000#5&23606a80&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:28:07 385][Global][Inf]---------->[Port0]NoDeviceConnected
[15:28:07 385][Global][Inf]---------->[Port1]NoDeviceConnected
[15:28:07 385][Global][Inf]---------->[Port2]NoDeviceConnected
[15:28:07 385][Global][Inf]---------->[Port3]NoDeviceConnected
[15:28:07 385][Global][Inf]---------->[Port4]NoDeviceConnected
[15:28:07 385][Global][Inf]---------->[Port5]NoDeviceConnected
[15:28:07 385][Global][Inf]-------->[Port1]NoDeviceConnected
[15:28:07 385][Global][Inf]--Host: Intel(R) 8/C220 USB EHCI n° 2 - 8C2D
[15:28:07 385][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_8c2d&subsys_06121028&rev_04#3&11583659&0&d0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[15:28:07 385][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&12e72867&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:28:07 447][Global][Inf]-------->[Port0]USB#VID_8087&PID_8008#5&1ffa69d&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:28:07 447][Global][Inf]---------->[Port0]NoDeviceConnected
[15:28:07 447][Global][Inf]---------->[Port1]NoDeviceConnected
[15:28:07 447][Global][Inf]---------->[Port2]NoDeviceConnected
[15:28:07 447][Global][Inf]---------->[Port3]NoDeviceConnected
[15:28:07 447][Global][Inf]-------->[Port1]NoDeviceConnected
[15:28:07 448][Global][Inf]--Host: Contrôleur d’hôte compatible xHCI USB
[15:28:07 448][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_8c31&subsys_06121028&rev_04#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[15:28:07 448][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&352e7820&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[15:28:07 448][Global][Inf]-------->[Port0]NoDeviceConnected
[15:28:07 449][Global][Inf]-------->[Port1]Other device
[15:28:07 449][Global][Inf]-------->[Port2]NoDeviceConnected
[15:28:07 449][Global][Inf]-------->[Port3]Other device
[15:28:07 449][Global][Inf]-------->[Port4]NoDeviceConnected
[15:28:07 449][Global][Inf]-------->[Port5]NoDeviceConnected
[15:28:07 449][Global][Inf]-------->[Port6]NoDeviceConnected
[15:28:07 449][Global][Inf]-------->[Port7]NoDeviceConnected
[15:28:07 449][Global][Inf]-------->[Port8]Other device
[15:28:07 449][Global][Inf]-------->[Port9]NoDeviceConnected
[15:28:07 449][Global][Err]-------->[Port10]Error connect status 3
[15:28:07 449][Global][Err]-------->[Port11]Error connect status 3
[15:28:07 449][Global][Err]-------->[Port12]Error connect status 3
[15:28:07 449][Global][Err]-------->[Port13]Error connect status 3
[15:28:07 449][Global][Err]-------->[Port14]Error connect status 3
[15:28:07 449][Global][Inf]-------->[Port15]NoDeviceConnected
[15:28:07 449][Global][Inf]-------->[Port16]NoDeviceConnected
[15:28:07 449][Global][Inf]--Scan USB host controller complete
[15:28:07 450][Global][Inf]--Update data center with HubMap
[15:28:07 450][Global][Inf]--Update hub5 device data
[15:28:07 450][Global][Inf]--Update HUB5-1
[15:28:07 450][HUB5-1][Inf]--Update device path
[15:28:07 450][Global][Inf]--Update HUB5-2
[15:28:07 450][HUB5-2][Inf]--Update device path
[15:28:07 450][Global][Inf]--Update HUB5-3
[15:28:07 450][HUB5-3][Inf]--Update device path
[15:28:07 450][Global][Inf]--Update HUB5-4
[15:28:07 450][HUB5-4][Inf]--Update device path
[15:28:07 450][Global][Inf]--Update HUB5-5
[15:28:07 450][HUB5-5][Inf]--Update device path
[15:28:07 450][Global][Inf]--Update HUB5-6
[15:28:07 450][HUB5-6][Inf]--Update device path
[15:28:07 450][Global][Inf]--Update HUB5-7
[15:28:07 450][HUB5-7][Inf]--Update device path
[15:28:07 450][Global][Inf]--Update HUB5-8
[15:28:07 450][HUB5-8][Inf]--Update device path
[15:28:07 450][Global][Inf]--Update HUB5-9
[15:28:07 450][HUB5-9][Inf]--Update device path
[15:28:07 450][Global][Inf]--Update HUB5-10
[15:28:07 450][HUB5-10][Inf]--Update device path
[15:28:07 450][Global][Inf]--Update HUB5-11
[15:28:07 450][HUB5-11][Inf]--Update device path
[15:28:07 450][Global][Inf]--Update HUB5-12
[15:28:07 450][HUB5-12][Inf]--Update device path
[15:28:07 450][Global][Inf]--Update HUB5-13
[15:28:07 450][HUB5-13][Inf]--Update device path
[15:28:07 450][Global][Inf]--Update HUB5-14
[15:28:07 450][HUB5-14][Inf]--Update device path
[15:28:07 450][Global][Inf]--Update HUB5-15
[15:28:07 450][HUB5-15][Inf]--Update device path
[15:28:07 450][Global][Inf]--Update HUB5-16
[15:28:07 450][HUB5-16][Inf]--Update device path
[15:28:07 450][Global][Inf]--Update HUB5-17
[15:28:07 450][HUB5-17][Inf]--Update device path
Related
Hi!
Usb host on my A70 IT doesn't works(or works not properly?)
Result is the same with 4 different usb flash...
PHP:
<6>request_suspend_state: wakeup (3->0) at 34543067291305 (2011-03-20 08:55:26.774108889 UTC)
<7>omapdss omapdss: regulator_enable omapdss-vdds_dsi enabled 0
<4>omapdss DPI: Could not find exact pixel clock. Requested 41575 kHz, got 41574 kHz
<6>panel_enable [lcd]
<7>usb usb1: usb auto-resume
<7>ohci-omap ohci-omap.0: resume root hub
<7>hub 1-0:1.0: hub_resume
<7>hub 1-0:1.0: port 2: status 0107 change 0000
<7>hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000
<7>usb 1-2: usb resume
<7>hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0004
<7>ohci-omap ohci-omap.0: GetStatus roothub.portstatus [1] = 0x00040103 PSSC PPS PES CCS
<7>usb 1-2: finish resume
<7>ohci-omap ohci-omap.0: urb c5bc9b40 path 2 ep0in 5ec20000 cc 5 --> status -62
<7>usb 1-2: retry with reset-resume
<7>hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0004
<7>ohci-omap ohci-omap.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
<6>usb 1-2: reset full speed USB device using ohci-omap and address 2
<7>hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0004
<7>ohci-omap ohci-omap.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS
<7>usb 1-2: ep0 maxpacket = 16
<4>mma7660fc_ctrl_ioctl: Set polling delay 200
<4>usb_switch_print_state: 3 ATTACHED_HOST
<4>
<4>usb_switch_print_state: 3 ATTACHED_HOST
<4>
<7>twl4030_usb twl4030_usb: regulator_enable twl4030_usb-usb1v5 enabled 0
<7>twl4030_usb twl4030_usb: regulator_enable twl4030_usb-usb1v8 enabled 0
<7>twl4030_usb twl4030_usb: regulator_enable twl4030_usb-usb3v1 enabled 0
<6>musb_hdrc: version 6.0, musb-dma, peripheral, debug=0
<7>twl4030_usb twl4030_usb: regulator_enable twl4030_usb-usb3v1 enabled 1
<7>twl4030_usb twl4030_usb: regulator_enable twl4030_usb-usb1v8 enabled 1
<7>twl4030_usb twl4030_usb: regulator_enable twl4030_usb-usb1v5 enabled 1
<6>musb_hdrc: USB Host mode controller at fa0ab000 using DMA, IRQ 92
<6>musb_hdrc musb_hdrc: MUSB HDRC host driver
<7>/mnt/flash/releases/G8A/AX08_r2.1.2/arcbuild/linux/drivers/usb/core/inode.c: creating file '002'
<6>musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 2
<7>usb usb2: default language 0x0409
<6>usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb2: Product: MUSB HDRC host driver
<6>usb usb2: Manufacturer: Linux 2.6.29-omap1 musb-hcd
<6>usb usb2: SerialNumber: musb_hdrc
<7>usb usb2: uevent
<7>usb usb2: usb_probe_device
<6>usb usb2: configuration #1 chosen from 1 choice
<7>usb usb2: adding 2-0:1.0 (config #1, interface 0)
<7>usb 2-0:1.0: uevent
<7>hub 2-0:1.0: usb_probe_interface
<7>hub 2-0:1.0: usb_probe_interface - got id
<6>hub 2-0:1.0: USB hub found
<6>hub 2-0:1.0: 1 port detected
<7>hub 2-0:1.0: standalone hub
<7>hub 2-0:1.0: individual port power switching
<7>hub 2-0:1.0: no over-current protection
<7>hub 2-0:1.0: power on to power good time: 10ms
<7>hub 2-0:1.0: 100mA bus power budget for each child
<7>hub 2-0:1.0: local power source is good
<7>hub 2-0:1.0: enabling power on all ports
<7>/mnt/flash/releases/G8A/AX08_r2.1.2/arcbuild/linux/drivers/usb/core/inode.c: creating file '001'
<7>hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
<7>hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0002
<7>hub 2-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
<7>hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
<6>usb 2-1: new high speed USB device using musb_hdrc and address 2
<7>usb 2-1: khubd timed out on ep0in len=0/64
<7>usb 2-1: khubd timed out on ep0in len=0/64
<7>usb 2-1: khubd timed out on ep0in len=0/64
<3>usb 2-1: device descriptor read/64, error -110
<7>usb 2-1: khubd timed out on ep0in len=0/64
<7>usb 2-1: khubd timed out on ep0in len=0/64
<7>usb 2-1: khubd timed out on ep0in len=0/64
<3>usb 2-1: device descriptor read/64, error -110
<6>usb 2-1: new high speed USB device using musb_hdrc and address 3
<7>usb 2-1: khubd timed out on ep0in len=0/64
<7>usb 2-1: khubd timed out on ep0in len=0/64
<7>usb 2-1: khubd timed out on ep0in len=0/64
<3>usb 2-1: device descriptor read/64, error -110
<7>usb 2-1: khubd timed out on ep0in len=0/64
<7>usb 2-1: khubd timed out on ep0in len=0/64
<7>usb 2-1: khubd timed out on ep0in len=0/64
<3>usb 2-1: device descriptor read/64, error -110
<6>usb 2-1: new high speed USB device using musb_hdrc and address 4
...and no external drive presented
Help!!! What should I do?
Decided ...
There was no connection between contact 4 and signal ground on usb-microusb adapter.
P.S. But this adapter works properly with HP Voice Messenger ...
Hello.
I want to look, what happened at early boot stage of kernel (right from Uncompressing Linux stage).
Trying to do boot into fastboot mode and run fastboot oem boot - got this:
Code:
...
(bootloader) setup_tag addr=0x48000100 cmdline add=0x801E6708
(bootloader) TAG:Ramdisk OK
(bootloader) TAG:skuid 0x2A408
(bootloader) TAG:hero panel = 0x940026
(bootloader) TAG:engineerid = 0x0
(bootloader) TAG: PS ID = 0x2
(bootloader) Device CID is not super CID
(bootloader) CID is 0202
(bootloader) setting->cid::0202
(bootloader) serial number: HT22PV******
(bootloader) commandline from head: console=ttyHSL0
(bootloader) command line length =535
(bootloader) active commandline: poweron_status=1 board_shooter_u.disable
(bootloader) _uart3=0 diag.enabled=0 board_shooter_u.debug_uart=0 userdat
(bootloader) a_sel=0 androidboot.emmc=true androidboot.pagesize=2048 skui
(bootloader) d=0 ddt=20 androidboot.lb=0 androidboot.baseband=11.23.3504.
(bootloader) 09_M2 androidboot.cid=0202 androidboot.batt_poweron=good_b
(bootloader) attery androidboot.carrier=COMMON androidboot.mid=PG8630000
(bootloader) androidboot.keycaps=qwerty androidboot.dq=PASS androidboot.m
(bootloader) ode=normal androidboot.serialno=HT22PV****** androidboot.boo
(bootloader) tloader=1.49.0018 zygote_oneshot=off msm_watchdog.enable=1 c
(bootloader) onsole=ttyHSL0
(bootloader) aARM_Partion[0].name=misc
(bootloader) aARM_Partion[1].name=recovery
(bootloader) aARM_Partion[2].name=boot
(bootloader) aARM_Partion[3].name=system
(bootloader) aARM_Partion[4].name=cache
(bootloader) aARM_Partion[5].name=userdata
(bootloader) aARM_Partion[6].name=devlog
(bootloader) aARM_Partion[7].name=pdata
(bootloader) aARM_Partion[8].name=radio
(bootloader) aARM_Partion[9].name=adsp
(bootloader) aARM_Partion[A].name=radio_config
(bootloader) aARM_Partion[B].name=modem_st1
(bootloader) aARM_Partion[C].name=modem_st2
(bootloader) partition number=13
(bootloader) Valid partition num=13
(bootloader) ddr_get_size: rank 0 reg = E000
(bootloader) ddr_get_size: rank 1 reg = E000
(bootloader) ddr_get_size: ddr_size = 1024
(bootloader) TZ_HTC_SVC_SET_DDR_MPU ret = 0
(bootloader) smem 50006000 (phy 50006000): TZ_HTC_SVC_UPDATE_SMEM ret = 0
(bootloader) TZ_HTC_SVC_LOG_OPERATOR ret = 0
(bootloader) TZ_HTC_SVC_DISABLE ret = 6381568 (0x616000)
(bootloader) jump_to_kernel: machine_id(3358), tags_addr(0x48000100), ker
(bootloader) nel_addr(0x48008000)
(bootloader) -------------------hboot boot time:16517 msec
FAILED (status read failed (No such device))
finished. total time: 8.679s
And got this in computer's dmesg:
Code:
[317564.496129] usb 2-3: khubd timed out on ep0in len=0/5
[317564.496134] usb 2-3: unable to get BOS descriptor
[317564.499991] usb 2-3: default language 0x0409
[317564.502996] usb 2-3: udev 51, busnum 2, minor = 178
[317564.503016] usb 2-3: New USB device found, idVendor=0bb4, idProduct=0ff0
[317564.503022] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[317564.503025] usb 2-3: Product: Android 1.0
[317564.503027] usb 2-3: Manufacturer: htc, Inc
[317564.503029] usb 2-3: SerialNumber: HT22PV******
[317564.503152] usb 2-3: usb_probe_device
[317564.503156] usb 2-3: configuration #1 chosen from 1 choice
[317564.504131] usb 2-3: adding 2-3:1.0 (config #1, interface 0)
[317564.504251] drivers/usb/core/inode.c: creating file '051'
[317574.071377] ehci_hcd 0000:00:1d.7: detected XactErr len 0/64 retry 1
[317574.071406] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0008
[317574.071418] ehci_hcd 0000:00:1d.7: detected XactErr len 0/64 retry 2
[317574.071426] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001002 0 ACK POWER sig=se0 CSC
[317574.071440] hub 2-0:1.0: port 3, status 0100, change 0001, 12 Mb/s
[317574.071445] usb 2-3: USB disconnect, device number 51
[317574.071447] usb 2-3: unregistering device
[317574.071450] usb 2-3: unregistering interface 2-3:1.0
[317574.071453] ehci_hcd 0000:00:1d.7: detected XactErr len 0/64 retry 3
[317574.071484] ehci_hcd 0000:00:1d.7: detected XactErr len 0/64 retry 4
[317574.071505] ehci_hcd 0000:00:1d.7: detected XactErr len 0/64 retry 5
[317574.071535] ehci_hcd 0000:00:1d.7: detected XactErr len 0/64 retry 6
[317574.071543] ehci_hcd 0000:00:1d.7: shutdown urb e63d4d80 ep1in-bulk
[317574.071618] usb 2-3: usb_disable_device nuking all URBs
[317574.175056] hub 2-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x100
[317575.066817] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0008
[317575.066837] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001803 0 ACK POWER sig=j CSC CONNECT
[317575.066846] hub 2-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
[317575.170062] hub 2-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501
[317575.221350] ehci_hcd 0000:00:1d.7: port 3 high speed
[317575.221356] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
[317575.272142] usb 2-3: new high-speed USB device number 52 using ehci_hcd
[317575.323349] ehci_hcd 0000:00:1d.7: port 3 high speed
[317575.323355] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
[317575.386551] usb 2-3: default language 0x0409
[317575.386948] usb 2-3: udev 52, busnum 2, minor = 179
[317575.386951] usb 2-3: New USB device found, idVendor=0bb4, idProduct=0ff0
[317575.386954] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[317575.386957] usb 2-3: Product: Android Phone
[317575.386959] usb 2-3: Manufacturer: HTC
[317575.386961] usb 2-3: SerialNumber: HT22PV******
[317575.387075] usb 2-3: usb_probe_device
[317575.387079] usb 2-3: configuration #1 chosen from 1 choice
[317575.387389] usb 2-3: adding 2-3:1.0 (config #1, interface 0)
[317575.387668] libusual 2-3:1.0: usb_probe_interface
[317575.387679] libusual 2-3:1.0: usb_probe_interface - got id
[317575.387705] usb-storage 2-3:1.0: usb_probe_interface
[317575.387711] usb-storage 2-3:1.0: usb_probe_interface - got id
[317575.387988] scsi629 : usb-storage 2-3:1.0
[317575.388135] drivers/usb/core/inode.c: creating file '052'
[317576.390942] scsi 629:0:0:0: Direct-Access HTC Android Phone 0000 PQ: 0 ANSI: 2
[317576.391193] sd 629:0:0:0: Attached scsi generic sg2 type 0
[317576.398144] sd 629:0:0:0: [sdb] Attached SCSI removable disk
[317577.895522] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0008
[317577.895540] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001002 0 ACK POWER sig=se0 CSC
[317577.895552] hub 2-0:1.0: port 3, status 0100, change 0001, 12 Mb/s
[317577.895561] usb 2-3: USB disconnect, device number 52
[317577.895563] usb 2-3: unregistering device
[317577.895566] usb 2-3: unregistering interface 2-3:1.0
[317577.902263] usb 2-3: usb_disable_device nuking all URBs
[317578.006049] hub 2-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x100
[317578.133715] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0008
[317578.133734] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001803 0 ACK POWER sig=j CSC CONNECT
[317578.133746] hub 2-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
[317578.237057] hub 2-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501
[317578.288350] ehci_hcd 0000:00:1d.7: port 3 high speed
[317578.288356] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
[317578.339057] usb 2-3: new high-speed USB device number 53 using ehci_hcd
[317578.390348] ehci_hcd 0000:00:1d.7: port 3 high speed
[317578.390355] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
[317578.453590] usb 2-3: default language 0x0409
[317578.453940] usb 2-3: udev 53, busnum 2, minor = 180
[317578.453943] usb 2-3: New USB device found, idVendor=0bb4, idProduct=0ff0
[317578.453945] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[317578.453948] usb 2-3: Product: Android Phone
[317578.453950] usb 2-3: Manufacturer: HTC
[317578.453952] usb 2-3: SerialNumber: HT22PV******
[317578.454066] usb 2-3: usb_probe_device
[317578.454071] usb 2-3: configuration #1 chosen from 1 choice
[317578.454504] usb 2-3: adding 2-3:1.0 (config #1, interface 0)
[317578.454696] libusual 2-3:1.0: usb_probe_interface
[317578.454703] libusual 2-3:1.0: usb_probe_interface - got id
[317578.454718] usb-storage 2-3:1.0: usb_probe_interface
[317578.454723] usb-storage 2-3:1.0: usb_probe_interface - got id
[317578.457454] scsi630 : usb-storage 2-3:1.0
[317578.457589] usb 2-3: adding 2-3:1.1 (config #1, interface 1)
[317578.457673] drivers/usb/core/inode.c: creating file '053'
[317578.981002] ehci_hcd 0000:00:1d.7: detected XactErr len 0/24 retry 1
[317578.981032] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0008
[317578.981042] ehci_hcd 0000:00:1d.7: detected XactErr len 0/24 retry 2
[317578.981050] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001002 0 ACK POWER sig=se0 CSC
[317578.981065] hub 2-0:1.0: port 3, status 0100, change 0001, 12 Mb/s
[317578.981069] usb 2-3: USB disconnect, device number 53
[317578.981072] usb 2-3: unregistering device
[317578.981075] ehci_hcd 0000:00:1d.7: detected XactErr len 0/24 retry 3
[317578.981078] usb 2-3: unregistering interface 2-3:1.0
[317578.981111] ehci_hcd 0000:00:1d.7: detected XactErr len 0/24 retry 4
[317578.981134] ehci_hcd 0000:00:1d.7: detected XactErr len 0/24 retry 5
[317578.981164] ehci_hcd 0000:00:1d.7: detected XactErr len 0/24 retry 6
[317578.981193] ehci_hcd 0000:00:1d.7: detected XactErr len 0/24 retry 7
[317578.981350] ehci_hcd 0000:00:1d.7: detected XactErr len 0/24 retry 8
[317578.981374] ehci_hcd 0000:00:1d.7: detected XactErr len 0/24 retry 9
[317578.981389] usb 2-3: unregistering interface 2-3:1.1
[317578.981397] ehci_hcd 0000:00:1d.7: detected XactErr len 0/24 retry 10
[317578.981419] ehci_hcd 0000:00:1d.7: detected XactErr len 0/24 retry 11
[317578.981441] ehci_hcd 0000:00:1d.7: detected XactErr len 0/24 retry 12
[317578.981479] ehci_hcd 0000:00:1d.7: shutdown urb f5a2ff00 ep2in-bulk
[317578.981546] usb 2-3: usb_disable_device nuking all URBs
[317579.085116] hub 2-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x100
[317579.223614] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0008
[317579.223633] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001803 0 ACK POWER sig=j CSC CONNECT
[317579.223646] hub 2-0:1.0: port 3, status 0501, change 0001, 480 Mb/s
[317579.327057] hub 2-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x501
[317579.378348] ehci_hcd 0000:00:1d.7: port 3 high speed
[317579.378355] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
[317579.429034] usb 2-3: new high-speed USB device number 54 using ehci_hcd
[317579.480225] ehci_hcd 0000:00:1d.7: port 3 high speed
[317579.480231] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
[317579.543964] usb 2-3: skipped 1 descriptor after configuration
[317579.543968] usb 2-3: skipped 4 descriptors after interface
[317579.544233] usb 2-3: default language 0x0409
[317579.545121] usb 2-3: udev 54, busnum 2, minor = 181
[317579.545128] usb 2-3: New USB device found, idVendor=0bb4, idProduct=0ff0
[317579.545131] usb 2-3: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[317579.545134] usb 2-3: Product: Android Phone
[317579.545139] usb 2-3: Manufacturer: HTC
[317579.545141] usb 2-3: SerialNumber: HT22PV******
[317579.545262] usb 2-3: usb_probe_device
[317579.545266] usb 2-3: configuration #1 chosen from 1 choice
[317579.549522] usb 2-3: adding 2-3:1.0 (config #1, interface 0)
[317579.549956] rndis_host 2-3:1.0: usb_probe_interface
[317579.549959] rndis_host 2-3:1.0: usb_probe_interface - got id
[317579.552878] rndis_host 2-3:1.0: usb0: register 'rndis_host' at usb-0000:00:1d.7-3, RNDIS device, d6:cc:25:**:**:**
[317579.552914] usb 2-3: adding 2-3:1.1 (config #1, interface 1)
[317579.553971] usb 2-3: adding 2-3:1.2 (config #1, interface 2)
[317579.554292] libusual 2-3:1.2: usb_probe_interface
[317579.554302] libusual 2-3:1.2: usb_probe_interface - got id
[317579.554320] usb-storage 2-3:1.2: usb_probe_interface
[317579.554329] usb-storage 2-3:1.2: usb_probe_interface - got id
[317579.559101] scsi631 : usb-storage 2-3:1.2
[317579.559239] usb 2-3: adding 2-3:1.3 (config #1, interface 3)
[317579.559323] drivers/usb/core/inode.c: creating file '054'
[317579.743564] usb 2-3: link qh32-0001/f2839d00 start 7 [1/0 us]
[317580.561186] scsi 631:0:0:0: Direct-Access HTC Android Phone 0000 PQ: 0 ANSI: 2
[317580.561419] sd 631:0:0:0: Attached scsi generic sg2 type 0
[317580.568777] sd 631:0:0:0: [sdb] Attached SCSI removable disk
[317590.178019] usb0: no IPv6 routers present
I have tried to modify arch/arm/mach-msm/include/mach/htc_usb.h and arch/arm/mach-msm/board-shooter_u.c files to use same dVendor=0bb4, idProduct=0ff0 at all bootup time, but device do reset usb port and I can't see what's happening after kernel got control.
Thank You!
So i rooted my POCO X2 and installed orange fox recovery, used the same rom which came pre-installed. Now a persistent notification of "SERIAL CONSOLE ENABLED, performance maybe impacted check bootloader to disable" hovers in my notifications, my device is running on ANDROID 11. Please help!
Hello,
I recently got a MagicSee S905X Iron TV Box with Android 7.1.2, unfortunately out of the box was not working well and I tried to flash via SD Card new firmware (20170630) , at that point in time I had video signal sent to my TV via HDMI.
After the apparently unsuccessful update there is only red led light switching on.
When using USB Burning tool I tried downloading newer release - (20171105). Now when I connect my PC to the box using USB (less than 1m) the device is recognized but despite trying all configurations (Erase flash ticked/or not, normal erase, force erase etc). I don't go any further than 4% [0x10303004]Romcode/Switch status/Identify/Error result
Any suggestions? I've tried doing it with and toothpick in the AV hole, with USB power only as well power cord connected - in both cases the optical slot flashes red.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[19:21:56 125][Global][Inf]--Burning thread HUB3-1 start
[19:21:56 176][HUB3-1][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&1d7e6c28&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000cbc
[19:21:56 226][HUB3-1][Inf]--Connect path=Intel(R) 8 Series USB Enhanced Host Controller #1 - 9C26/P0/P0/P0
[19:21:56 226][HUB3-1][Inf]--Start burning...
[19:21:56 276][HUB3-1][Inf]--------------ERASE BOOTLOADER------------
[19:21:56 276][HUB3-1][Inf]-------------Download DDR.USB-----------
[19:21:56 276][HUB3-1][Inf]--Download DDR.USB,size: 49152!
[19:21:56 277][HUB3-1][Inf]--2-4-0-0
[19:21:56 277][HUB3-1][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[19:21:56 778][HUB3-1][Inf]--Control write pll reg1 0xd9000000:0x00005183
[19:21:57 278][HUB3-1][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[19:21:57 779][HUB3-1][Inf]--Control write pll reg1 0xd9000000:0x00005183
[19:21:58 279][HUB3-1][Inf]--Write initial succeed
[19:21:58 279][HUB3-1][Inf]--Upload encrypt at 0xc8100228
[19:21:58 279][HUB3-1][Inf]--ulValue = 0xadfc318c
[19:21:58 279][HUB3-1][Inf]--Read encrypt value succeed
[19:21:58 289][HUB3-1][Inf]--Transfer complete 49152
[19:21:58 289][HUB3-1][Inf]--Run at address 0xd9000000
[19:21:58 290][HUB3-1][Inf]--RunInRam success
[19:21:58 320][HUB3-1][Inf]--2-4-0-0-0-1-0-0
[19:21:58 320][HUB3-1][Inf]--CheckFileRunState succeed
[19:21:58 320][HUB3-1][Inf]--runResult:0x 0,paraMagic:0x7856efab
[19:21:58 320][HUB3-1][Inf]--ddrCapacity:0x 800
[19:21:58 321][HUB3-1][Inf]--2-4-0-0-0-1-0-0
[19:21:58 321][HUB3-1][Inf]--Get Encrpt ulValue = 0xadfc318c
[19:21:58 321][HUB3-1][Err]--download 1 time!
[19:21:58 321][HUB3-1][Inf]--Download UBOOT.USB buffer at 0x0200c000
[19:21:58 438][HUB3-1][Inf]--Transfer complete
[19:21:58 639][HUB3-1][Inf]--2-4-0-0-0-1-0-0
[19:21:58 639][HUB3-1][Inf]--Download DDR.USB buffer at 0xd9000000
[19:21:58 649][HUB3-1][Inf]--Transfer complete
[19:21:58 650][HUB3-1][Inf]--DownCheckPara succeed
[19:21:58 651][HUB3-1][Inf]--2-4-0-0-0-1-0-0
[19:21:58 651][HUB3-1][Inf]--RunInAddr at address 0xd9000000
[19:21:58 689][HUB3-1][Inf]--ReadCheckPara succeed
[19:21:58 689][HUB3-1][Inf]--2-4-0-0-0-1-0-0
[19:21:58 689][HUB3-1][Inf]--Get Encrpt ulValue = 0xadfc318c
[19:21:58 689][HUB3-1][Inf]--Download DDR.USB buffer at 0xd9000000
[19:21:58 698][HUB3-1][Inf]--Transfer complete
[19:21:58 699][HUB3-1][Inf]--DownRunPara succeed
[19:21:58 699][HUB3-1][Inf]--2-4-0-0-0-1-0-0
[19:21:58 699][HUB3-1][Inf]--RunInRam at address 0xd9000000
[19:21:58 966][Global][Inf]--Catch DBT_DEVICEREMOVECOMPLETE
[19:21:58 966][Global][Inf]--Scan usb device
[19:21:58 966][Global][Inf]--Aml scan WorldCup Device
[19:21:58 967][Global][Inf]--Host: USB xHCI Compliant Host Controller
[19:21:58 967][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9c31&subsys_397817aa&rev_04#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[19:21:58 967][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&2b8754ff&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[19:21:58 967][Global][Inf]-------->[Port0]NoDeviceConnected
[19:21:58 967][Global][Inf]-------->[Port1]NoDeviceConnected
[19:21:58 968][Global][Inf]-------->[Port2]NoDeviceConnected
[19:21:58 968][Global][Inf]-------->[Port3]Other device
[19:21:58 968][Global][Inf]-------->[Port4]NoDeviceConnected
[19:21:58 968][Global][Inf]-------->[Port5]NoDeviceConnected
[19:21:58 968][Global][Inf]-------->[Port6]NoDeviceConnected
[19:21:58 968][Global][Inf]-------->[Port7]NoDeviceConnected
[19:21:58 968][Global][Inf]-------->[Port8]NoDeviceConnected
[19:21:58 968][Global][Inf]-------->[Port9]NoDeviceConnected
[19:21:58 969][Global][Inf]-------->[Port10]NoDeviceConnected
[19:21:58 969][Global][Inf]-------->[Port11]NoDeviceConnected
[19:21:58 969][Global][Inf]-------->[Port12]NoDeviceConnected
[19:21:58 969][Global][Inf]--Host: Intel(R) 8 Series USB Enhanced Host Controller #1 - 9C26
[19:21:58 970][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9c26&subsys_397817aa&rev_04#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[19:21:58 970][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&d275d6b&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[19:21:58 970][Global][Inf]-------->[Port0]USB#VID_8087&PID_8000#5&58b19ba&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[19:21:58 970][Global][Inf]---------->[Port0]NoDeviceConnected
[19:21:58 970][Global][Inf]---------->[Port1]NoDeviceConnected
[19:21:58 970][Global][Inf]---------->[Port2]NoDeviceConnected
[19:21:58 970][Global][Inf]---------->[Port3]NoDeviceConnected
[19:21:58 970][Global][Inf]---------->[Port4]NoDeviceConnected
[19:21:58 971][Global][Inf]---------->[Port5]Other device
[19:21:58 971][Global][Inf]---------->[Port6]Other device
[19:21:58 972][Global][Inf]---------->[Port7]NoDeviceConnected
[19:21:58 972][Global][Inf]-------->[Port1]NoDeviceConnected
[19:21:58 972][Global][Inf]--Scan USB host controller complete
[19:21:58 972][Global][Inf]--Update data center with HubMap
[19:21:58 972][Global][Inf]--Update hub3 device data
[19:21:58 972][Global][Inf]--Update HUB3-1
[19:21:58 972][HUB3-1][Inf]--Update device path
[19:21:58 972][Global][Inf]--Update HUB3-2
[19:21:58 972][HUB3-2][Inf]--Update device path
[19:21:58 972][Global][Inf]--Update HUB3-3
[19:21:58 972][HUB3-3][Inf]--Update device path
[19:21:58 972][Global][Inf]--Update HUB3-4
[19:21:58 972][HUB3-4][Inf]--Update device path
[19:21:58 972][Global][Inf]--Update HUB3-5
[19:21:58 972][HUB3-5][Inf]--Update device path
[19:21:58 972][Global][Inf]--Update HUB3-6
[19:21:58 972][HUB3-6][Inf]--Update device path
[19:21:58 972][Global][Inf]--Update HUB3-7
[19:21:58 972][HUB3-7][Inf]--Update device path
[19:21:58 972][Global][Inf]--Update HUB3-8
[19:21:58 972][HUB3-8][Inf]--Update device path
[19:21:58 973][Global][Inf]--Scan end
[19:21:59 002][HUB3-1][Inf]--Device is removed
[19:21:59 222][Global][Inf]--Catch DBT_DEVICEARRIVAL
[19:21:59 222][Global][Inf]--Scan usb device
[19:21:59 222][Global][Inf]--Aml scan WorldCup Device
[19:21:59 223][Global][Inf]--Host: USB xHCI Compliant Host Controller
[19:21:59 223][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9c31&subsys_397817aa&rev_04#3&11583659&0&a0#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[19:21:59 223][Global][Inf]---->Roothub:USB#ROOT_HUB30#4&2b8754ff&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[19:21:59 223][Global][Inf]-------->[Port0]NoDeviceConnected
[19:21:59 223][Global][Inf]-------->[Port1]NoDeviceConnected
[19:21:59 223][Global][Inf]-------->[Port2]NoDeviceConnected
[19:21:59 224][Global][Inf]-------->[Port3]Other device
[19:21:59 224][Global][Inf]-------->[Port4]NoDeviceConnected
[19:21:59 224][Global][Inf]-------->[Port5]NoDeviceConnected
[19:21:59 224][Global][Inf]-------->[Port6]NoDeviceConnected
[19:21:59 224][Global][Inf]-------->[Port7]NoDeviceConnected
[19:21:59 224][Global][Inf]-------->[Port8]NoDeviceConnected
[19:21:59 224][Global][Inf]-------->[Port9]NoDeviceConnected
[19:21:59 224][Global][Inf]-------->[Port10]NoDeviceConnected
[19:21:59 224][Global][Inf]-------->[Port11]NoDeviceConnected
[19:21:59 224][Global][Inf]-------->[Port12]NoDeviceConnected
[19:21:59 225][Global][Inf]--Host: Intel(R) 8 Series USB Enhanced Host Controller #1 - 9C26
[19:21:59 225][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_9c26&subsys_397817aa&rev_04#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[19:21:59 226][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&d275d6b&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[19:21:59 226][Global][Inf]-------->[Port0]USB#VID_8087&PID_8000#5&58b19ba&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[19:21:59 226][Global][Inf]---------->[Port0]\\?\usb#vid_1b8e&pid_c003#6&1d7e6c28&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[19:21:59 226][Global][Inf]---------->[Port1]NoDeviceConnected
[19:21:59 226][Global][Inf]---------->[Port2]NoDeviceConnected
[19:21:59 226][Global][Inf]---------->[Port3]NoDeviceConnected
[19:21:59 226][Global][Inf]---------->[Port4]NoDeviceConnected
[19:21:59 227][Global][Inf]---------->[Port5]Other device
[19:21:59 228][Global][Inf]---------->[Port6]Other device
[19:21:59 228][Global][Inf]---------->[Port7]NoDeviceConnected
[19:21:59 228][Global][Inf]-------->[Port1]NoDeviceConnected
[19:21:59 228][Global][Inf]--Scan USB host controller complete
[19:21:59 228][Global][Inf]--Update data center with HubMap
[19:21:59 228][Global][Inf]--Update hub3 device data
[19:21:59 228][Global][Inf]--Update HUB3-1 \\?\usb#vid_1b8e&pid_c003#6&1d7e6c28&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[19:21:59 228][HUB3-1][Inf]--Update device path
[19:21:59 228][Global][Inf]--Update HUB3-2
[19:21:59 228][HUB3-2][Inf]--Update device path
[19:21:59 228][Global][Inf]--Update HUB3-3
[19:21:59 228][HUB3-3][Inf]--Update device path
[19:21:59 228][Global][Inf]--Update HUB3-4
[19:21:59 228][HUB3-4][Inf]--Update device path
[19:21:59 228][Global][Inf]--Update HUB3-5
[19:21:59 228][HUB3-5][Inf]--Update device path
[19:21:59 228][Global][Inf]--Update HUB3-6
[19:21:59 228][HUB3-6][Inf]--Update device path
[19:21:59 228][Global][Inf]--Update HUB3-7
[19:21:59 228][HUB3-7][Inf]--Update device path
[19:21:59 228][Global][Inf]--Update HUB3-8
[19:21:59 228][HUB3-8][Inf]--Update device path
[19:21:59 228][Global][Inf]--Scan end
[19:21:59 254][HUB3-1][Inf]--Device is connected
[19:21:59 254][HUB3-1][Inf]--Close device handle 0x00000cbc
[19:21:59 304][HUB3-1][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&1d7e6c28&0&1#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000a4c
[19:22:04 355][HUB3-1][Inf]--2-4-0-0
[19:22:04 355][HUB3-1][Err]--CheckFileRunState failed
[19:22:04 362][HUB3-1][Err]--[0x10303004]Romcode/Switch status/Identify/Error result
[19:22:04 362][HUB3-1][Inf]--Close device handle 0x00000a4c
Turned out to be firmware issue - even though I downloaded it from official website magicsee have newer firmware for boxes manufactured in 2018.
I e-mailed the support and they shared with me download link for 2018 July version.
Same error on mi box s mdz-22-ab stuck on 4% ... Pls help Mai....
The device is a X10 MAX R-TV BOX 4gb/128gb Amlogic S905X3. Since the default firmware was pretty bad ( a summary can be found here (xda-forum post)) I decided to add another firmware.
The first thing I tried was Slimbox firmware that seemed to have an image that matched my exact specs (forum post - project page). However, no matter what I tried, I always seemed to get the same error. The process would fail at 3% on the `Download UBOOT` step with an [0x10303004]Romcode/Switch status/Identify/Error
Ever since I've been trying various images and some of them can be installed but might have other issues - most commonly the Wifi doesn't work or the remote is not recognized - but any image that is supposed to be made for this device fails on the same step with the same error.
These are links to images I tried that have failed
https://androidtvbox.eu/new-s10-max-plus-firmware-for-tv-box-with-s905x3-soc-20190916/ - this has a super slow download speed, let me know if anyone wants it so I can upload it to a better host
https://forum.atvxperience.com/viewtopic.php?t=3694 - this has a password.bin with. I've tried with and without it, no luck
and of course the Slimbox images
Some images that i've tried and got partial success:
https://forum.xda-developers.com/t/...tv-9-mi-box-fw-port-to-amlogic-boxes.4199287/ - No wifi
Y8 PRO(S905X3)(1).zip found HERE - Now wifi, remote not recognised
I've tried other stuff, like different versions of USB burning tool, configs, combinations etc. Some roms don't even boot but the ones that are 'official' always fail at the same step.
This is the full error log
Spoiler: LOG
Code:
[11:43:18 956][Global][Inf]--USB_Burning_Tool soft Version: V2.1.7.3
[11:43:18 956][Global][Inf]--Windows Version: Microsoft Windows 10, Bit: 64
[11:43:18 976][Global][Inf]--Scan usb device
[11:43:18 976][Global][Inf]--Aml scan WorldCup Device
[11:43:18 977][Global][Inf]--Host: USB xHCI Compliant Host Controller
[11:43:18 977][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_43bc&subsys_11421b21&rev_02#4&115a0d29&0&000b#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[11:43:18 977][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&349b2d91&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[11:43:18 977][Global][Inf]-------->[Port0]NoDeviceConnected
[11:43:18 977][Global][Inf]-------->[Port1]NoDeviceConnected
[11:43:18 977][Global][Inf]-------->[Port2]NoDeviceConnected
[11:43:18 977][Global][Inf]-------->[Port3]NoDeviceConnected
[11:43:18 977][Global][Inf]-------->[Port4]NoDeviceConnected
[11:43:18 977][Global][Inf]-------->[Port5]NoDeviceConnected
[11:43:18 977][Global][Inf]-------->[Port6]NoDeviceConnected
[11:43:19 001][Global][Inf]-------->[Port7]Other device
[11:43:19 001][Global][Inf]-------->[Port8]NoDeviceConnected
[11:43:19 001][Global][Inf]-------->[Port9]NoDeviceConnected
[11:43:19 001][Global][Inf]-------->[Port10]NoDeviceConnected
[11:43:19 001][Global][Inf]-------->[Port11]NoDeviceConnected
[11:43:19 002][Global][Inf]--Host: USB xHCI Compliant Host Controller
[11:43:19 002][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_145c&subsys_87471043&rev_00#4&c93bee2&0&0339#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[11:43:19 002][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&2af7b18a&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[11:43:19 002][Global][Inf]-------->[Port0]NoDeviceConnected
[11:43:19 002][Global][Inf]-------->[Port1]Other device
[11:43:19 003][Global][Inf]-------->[Port2]Other device
[11:43:19 003][Global][Inf]-------->[Port3]NoDeviceConnected
[11:43:19 003][Global][Inf]-------->[Port4]NoDeviceConnected
[11:43:19 003][Global][Inf]-------->[Port5]NoDeviceConnected
[11:43:19 003][Global][Inf]-------->[Port6]NoDeviceConnected
[11:43:19 003][Global][Inf]-------->[Port7]NoDeviceConnected
[11:43:19 003][Global][Inf]--Scan USB host controller complete
[11:43:19 003][Global][Inf]--Update data center with HubMap
[11:43:19 003][Global][Inf]--Scan end
[11:43:23 470][Global][Inf]--User click open button
[11:43:28 630][Global][Inf]--Image path D:\TEMP\BOX\Kingnovel_X10_MAX_Firmware_And_Key\8bitDDR x10 max firmware(2019-12)\x10max-esv2.20200804.img
[11:43:28 630][Global][Inf]--OpenImg D:\TEMP\BOX\Kingnovel_X10_MAX_Firmware_And_Key\8bitDDR x10 max firmware(2019-12)\x10max-esv2.20200804.img
[11:43:33 687][Global][Inf]--check img crc success!
[11:43:33 687]Parse platform.conf
[11:43:33 688][Global][Inf]--Parsing burning package
[11:43:33 688][Global][Inf]--Load configuration file C:\Amlogic\USB_Burning_Tool\temp
[11:43:33 688][Global][Inf]--Parse burning configuration file C:\Amlogic\USB_Burning_Tool\temp\burn_config.xml
[11:43:33 691][Global][Inf]--Get burning key
[11:44:20 041][Global][Inf]--Catch DBT_DEVICEARRIVAL
[11:44:20 041][Global][Inf]--Scan usb device
[11:44:20 041][Global][Inf]--Aml scan WorldCup Device
[11:44:20 042][Global][Inf]--Host: USB xHCI Compliant Host Controller
[11:44:20 042][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_43bc&subsys_11421b21&rev_02#4&115a0d29&0&000b#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[11:44:20 042][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&349b2d91&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[11:44:20 043][Global][Inf]-------->[Port0]NoDeviceConnected
[11:44:20 043][Global][Inf]-------->[Port1]NoDeviceConnected
[11:44:20 043][Global][Inf]-------->[Port2]NoDeviceConnected
[11:44:20 043][Global][Inf]-------->[Port3]NoDeviceConnected
[11:44:20 043][Global][Inf]-------->[Port4]NoDeviceConnected
[11:44:20 043][Global][Inf]-------->[Port5]NoDeviceConnected
[11:44:20 043][Global][Inf]-------->[Port6]NoDeviceConnected
[11:44:20 043][Global][Inf]-------->[Port7]Other device
[11:44:20 043][Global][Inf]-------->[Port8]NoDeviceConnected
[11:44:20 043][Global][Inf]-------->[Port9]NoDeviceConnected
[11:44:20 043][Global][Inf]-------->[Port10]NoDeviceConnected
[11:44:20 043][Global][Inf]-------->[Port11]NoDeviceConnected
[11:44:20 044][Global][Inf]--Host: USB xHCI Compliant Host Controller
[11:44:20 044][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_145c&subsys_87471043&rev_00#4&c93bee2&0&0339#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[11:44:20 044][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&2af7b18a&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[11:44:20 044][Global][Inf]-------->[Port0]NoDeviceConnected
[11:44:20 044][Global][Inf]-------->[Port1]Other device
[11:44:20 045][Global][Inf]-------->[Port2]Other device
[11:44:20 045][Global][Inf]-------->[Port3]\\?\usb#vid_1b8e&pid_c003#6&2ba1940b&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[11:44:20 045][Global][Inf]-------->[Port4]NoDeviceConnected
[11:44:20 045][Global][Inf]-------->[Port5]NoDeviceConnected
[11:44:20 045][Global][Inf]-------->[Port6]NoDeviceConnected
[11:44:20 045][Global][Inf]-------->[Port7]NoDeviceConnected
[11:44:20 045][Global][Inf]--Scan USB host controller complete
[11:44:20 045][Global][Inf]--Update data center with HubMap
[11:44:20 045][Global][Inf]--Insert new hub2
[11:44:20 045][Global][Inf]--Update hub2 device data
[11:44:20 046][Global][Inf]--Update HUB2-1
[11:44:20 046][HUB2-1][Inf]--Update device path
[11:44:20 046][Global][Inf]--Update HUB2-2
[11:44:20 046][HUB2-2][Inf]--Update device path
[11:44:20 046][Global][Inf]--Update HUB2-3
[11:44:20 046][HUB2-3][Inf]--Update device path
[11:44:20 046][Global][Inf]--Update HUB2-4 \\?\usb#vid_1b8e&pid_c003#6&2ba1940b&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[11:44:20 046][HUB2-4][Inf]--Update device path
[11:44:20 046][Global][Inf]--Begin thread for HUB2-4
[11:44:20 046][Global][Inf]--Burning thread HUB2-4 start
[11:44:20 046][Global][Inf]--Update HUB2-5
[11:44:20 046][Global][Inf]--Burning thread HUB2-4 begin run
[11:44:20 046][HUB2-5][Inf]--Update device path
[11:44:20 046][Global][Inf]--Update HUB2-6
[11:44:20 047][HUB2-6][Inf]--Update device path
[11:44:20 047][Global][Inf]--Update HUB2-7
[11:44:20 047][HUB2-7][Inf]--Update device path
[11:44:20 047][Global][Inf]--Update HUB2-8
[11:44:20 047][HUB2-8][Inf]--Update device path
[11:44:20 047][Global][Inf]--Add Hub2: \\.\USB#ROOT_HUB30#5&2af7b18a&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} to m_HubDeviceDataVector
[11:44:20 047][Global][Inf]--Scan end
[11:44:22 960][Global][Inf]--User click start button
[11:44:22 962][Global][Inf]--SetErase
[11:44:22 962][Global][Inf]--Enable burning 1
[11:44:22 962][Global][Inf]--Scan usb device
[11:44:22 962][Global][Inf]--Aml scan WorldCup Device
[11:44:22 963][Global][Inf]--Host: USB xHCI Compliant Host Controller
[11:44:22 963][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_43bc&subsys_11421b21&rev_02#4&115a0d29&0&000b#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[11:44:22 963][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&349b2d91&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[11:44:22 963][Global][Inf]-------->[Port0]NoDeviceConnected
[11:44:22 963][Global][Inf]-------->[Port1]NoDeviceConnected
[11:44:22 963][Global][Inf]-------->[Port2]NoDeviceConnected
[11:44:22 963][Global][Inf]-------->[Port3]NoDeviceConnected
[11:44:22 963][Global][Inf]-------->[Port4]NoDeviceConnected
[11:44:22 963][Global][Inf]-------->[Port5]NoDeviceConnected
[11:44:22 963][Global][Inf]-------->[Port6]NoDeviceConnected
[11:44:22 964][Global][Inf]-------->[Port7]Other device
[11:44:22 964][Global][Inf]-------->[Port8]NoDeviceConnected
[11:44:22 964][Global][Inf]-------->[Port9]NoDeviceConnected
[11:44:22 964][Global][Inf]-------->[Port10]NoDeviceConnected
[11:44:22 964][Global][Inf]-------->[Port11]NoDeviceConnected
[11:44:22 964][Global][Inf]--Host: USB xHCI Compliant Host Controller
[11:44:22 964][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_145c&subsys_87471043&rev_00#4&c93bee2&0&0339#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[11:44:22 964][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&2af7b18a&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[11:44:22 964][Global][Inf]-------->[Port0]NoDeviceConnected
[11:44:22 964][Global][Inf]-------->[Port1]Other device
[11:44:22 965][Global][Inf]-------->[Port2]Other device
[11:44:22 965][Global][Inf]-------->[Port3]\\?\usb#vid_1b8e&pid_c003#6&2ba1940b&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[11:44:22 965][Global][Inf]-------->[Port4]NoDeviceConnected
[11:44:22 965][Global][Inf]-------->[Port5]NoDeviceConnected
[11:44:22 965][Global][Inf]-------->[Port6]NoDeviceConnected
[11:44:22 965][Global][Inf]-------->[Port7]NoDeviceConnected
[11:44:22 965][Global][Inf]--Scan USB host controller complete
[11:44:22 965][Global][Inf]--Update data center with HubMap
[11:44:22 965][Global][Inf]--Update hub2 device data
[11:44:22 965][Global][Inf]--Update HUB2-1
[11:44:22 965][HUB2-1][Inf]--Update device path
[11:44:22 965][Global][Inf]--Update HUB2-2
[11:44:22 965][HUB2-2][Inf]--Update device path
[11:44:22 965][Global][Inf]--Update HUB2-3
[11:44:22 965][HUB2-3][Inf]--Update device path
[11:44:22 965][Global][Inf]--Update HUB2-4 \\?\usb#vid_1b8e&pid_c003#6&2ba1940b&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[11:44:22 965][HUB2-4][Inf]--Update device path
[11:44:22 965][Global][Inf]--Update HUB2-5
[11:44:22 965][HUB2-5][Inf]--Update device path
[11:44:22 965][Global][Inf]--Update HUB2-6
[11:44:22 965][HUB2-6][Inf]--Update device path
[11:44:22 965][Global][Inf]--Update HUB2-7
[11:44:22 965][HUB2-7][Inf]--Update device path
[11:44:22 965][Global][Inf]--Update HUB2-8
[11:44:22 965][HUB2-8][Inf]--Update device path
[11:44:22 965][Global][Inf]--Scan end
[11:44:22 984][HUB2-4][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&2ba1940b&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000710
[11:44:23 047][HUB2-4][Inf]--CloneImageProxy
[11:44:23 047][Global][Inf]--OpenImg D:\TEMP\BOX\Kingnovel_X10_MAX_Firmware_And_Key\8bitDDR x10 max firmware(2019-12)\x10max-esv2.20200804.img
[11:44:23 047][HUB2-4][Inf]--Connect path=USB xHCI Compliant Host Controller/P0/P3
[11:44:23 047][HUB2-4][Inf]--Start burning...
[11:44:23 109][HUB2-4][Inf]--------------ERASE BOOTLOADER------------
[11:44:23 218][HUB2-4][Inf]--start SendIdentifyCmd
[11:44:23 218][HUB2-4][Inf]--0-7-0-16
[11:44:23 218][HUB2-4][Inf]--Identify status success
[11:44:23 219][HUB2-4][Inf]-- low_power
[11:44:23 224][HUB2-4][Inf]--Low power command success
[11:44:23 227][HUB2-4][Inf]--Read low power success
[11:44:23 227][HUB2-4][Inf]--bootloader_is_old
[11:44:23 227][HUB2-4][Inf]--Bootloader command success
[11:44:23 230][HUB2-4][Inf]--Bootloader is old
[11:44:23 230][HUB2-4][Inf]--erase_bootloader
[11:44:23 231][HUB2-4][Inf]--Erase command success
[11:44:23 238][HUB2-4][Inf]--Read erase status success
[11:44:23 238][HUB2-4][Inf]--reset
[11:44:23 238][HUB2-4][Inf]--reset command success
[11:44:24 242][Global][Inf]--Catch DBT_DEVICEREMOVECOMPLETE
[11:44:24 243][Global][Inf]--Scan usb device
[11:44:24 243][Global][Inf]--Aml scan WorldCup Device
[11:44:24 244][Global][Inf]--Host: USB xHCI Compliant Host Controller
[11:44:24 244][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_43bc&subsys_11421b21&rev_02#4&115a0d29&0&000b#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[11:44:24 244][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&349b2d91&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[11:44:24 244][Global][Inf]-------->[Port0]NoDeviceConnected
[11:44:24 244][Global][Inf]-------->[Port1]NoDeviceConnected
[11:44:24 244][Global][Inf]-------->[Port2]NoDeviceConnected
[11:44:24 244][Global][Inf]-------->[Port3]NoDeviceConnected
[11:44:24 244][Global][Inf]-------->[Port4]NoDeviceConnected
[11:44:24 244][Global][Inf]-------->[Port5]NoDeviceConnected
[11:44:24 244][Global][Inf]-------->[Port6]NoDeviceConnected
[11:44:24 244][Global][Inf]-------->[Port7]Other device
[11:44:24 244][Global][Inf]-------->[Port8]NoDeviceConnected
[11:44:24 244][Global][Inf]-------->[Port9]NoDeviceConnected
[11:44:24 244][Global][Inf]-------->[Port10]NoDeviceConnected
[11:44:24 245][Global][Inf]-------->[Port11]NoDeviceConnected
[11:44:24 245][Global][Inf]--Host: USB xHCI Compliant Host Controller
[11:44:24 245][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_145c&subsys_87471043&rev_00#4&c93bee2&0&0339#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[11:44:24 245][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&2af7b18a&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[11:44:24 245][Global][Inf]-------->[Port0]NoDeviceConnected
[11:44:24 245][Global][Inf]-------->[Port1]Other device
[11:44:24 246][Global][Inf]-------->[Port2]Other device
[11:44:24 246][Global][Inf]-------->[Port3]NoDeviceConnected
[11:44:24 246][Global][Inf]-------->[Port4]NoDeviceConnected
[11:44:24 246][Global][Inf]-------->[Port5]NoDeviceConnected
[11:44:24 246][Global][Inf]-------->[Port6]NoDeviceConnected
[11:44:24 246][Global][Inf]-------->[Port7]NoDeviceConnected
[11:44:24 246][Global][Inf]--Scan USB host controller complete
[11:44:24 246][Global][Inf]--Update data center with HubMap
[11:44:24 246][Global][Inf]--Update hub2 device data
[11:44:24 246][Global][Inf]--Update HUB2-1
[11:44:24 246][HUB2-1][Inf]--Update device path
[11:44:24 246][Global][Inf]--Update HUB2-2
[11:44:24 246][HUB2-2][Inf]--Update device path
[11:44:24 246][Global][Inf]--Update HUB2-3
[11:44:24 246][HUB2-3][Inf]--Update device path
[11:44:24 246][Global][Inf]--Update HUB2-4
[11:44:24 246][HUB2-4][Inf]--Update device path
[11:44:24 246][Global][Inf]--Update HUB2-5
[11:44:24 246][HUB2-5][Inf]--Update device path
[11:44:24 246][Global][Inf]--Update HUB2-6
[11:44:24 246][HUB2-6][Inf]--Update device path
[11:44:24 246][Global][Inf]--Update HUB2-7
[11:44:24 246][HUB2-7][Inf]--Update device path
[11:44:24 246][Global][Inf]--Update HUB2-8
[11:44:24 246][HUB2-8][Inf]--Update device path
[11:44:24 246][Global][Inf]--Scan end
[11:44:24 293][HUB2-4][Inf]--Device is removed
[11:44:25 663][Global][Inf]--Catch DBT_DEVICEARRIVAL
[11:44:25 663][Global][Inf]--Scan usb device
[11:44:25 663][Global][Inf]--Aml scan WorldCup Device
[11:44:25 664][Global][Inf]--Host: USB xHCI Compliant Host Controller
[11:44:25 664][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_43bc&subsys_11421b21&rev_02#4&115a0d29&0&000b#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[11:44:25 664][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&349b2d91&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[11:44:25 664][Global][Inf]-------->[Port0]NoDeviceConnected
[11:44:25 664][Global][Inf]-------->[Port1]NoDeviceConnected
[11:44:25 664][Global][Inf]-------->[Port2]NoDeviceConnected
[11:44:25 664][Global][Inf]-------->[Port3]NoDeviceConnected
[11:44:25 664][Global][Inf]-------->[Port4]NoDeviceConnected
[11:44:25 664][Global][Inf]-------->[Port5]NoDeviceConnected
[11:44:25 664][Global][Inf]-------->[Port6]NoDeviceConnected
[11:44:25 665][Global][Inf]-------->[Port7]Other device
[11:44:25 665][Global][Inf]-------->[Port8]NoDeviceConnected
[11:44:25 665][Global][Inf]-------->[Port9]NoDeviceConnected
[11:44:25 665][Global][Inf]-------->[Port10]NoDeviceConnected
[11:44:25 665][Global][Inf]-------->[Port11]NoDeviceConnected
[11:44:25 665][Global][Inf]--Host: USB xHCI Compliant Host Controller
[11:44:25 665][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_145c&subsys_87471043&rev_00#4&c93bee2&0&0339#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[11:44:25 665][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&2af7b18a&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[11:44:25 665][Global][Inf]-------->[Port0]NoDeviceConnected
[11:44:25 666][Global][Inf]-------->[Port1]Other device
[11:44:25 666][Global][Inf]-------->[Port2]Other device
[11:44:25 666][Global][Inf]-------->[Port3]\\?\usb#vid_1b8e&pid_c003#6&2ba1940b&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[11:44:25 666][Global][Inf]-------->[Port4]NoDeviceConnected
[11:44:25 666][Global][Inf]-------->[Port5]NoDeviceConnected
[11:44:25 667][Global][Inf]-------->[Port6]NoDeviceConnected
[11:44:25 667][Global][Inf]-------->[Port7]NoDeviceConnected
[11:44:25 667][Global][Inf]--Scan USB host controller complete
[11:44:25 667][Global][Inf]--Update data center with HubMap
[11:44:25 667][Global][Inf]--Update hub2 device data
[11:44:25 667][Global][Inf]--Update HUB2-1
[11:44:25 667][HUB2-1][Inf]--Update device path
[11:44:25 667][Global][Inf]--Update HUB2-2
[11:44:25 667][HUB2-2][Inf]--Update device path
[11:44:25 667][Global][Inf]--Update HUB2-3
[11:44:25 667][HUB2-3][Inf]--Update device path
[11:44:25 667][Global][Inf]--Update HUB2-4 \\?\usb#vid_1b8e&pid_c003#6&2ba1940b&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[11:44:25 667][HUB2-4][Inf]--Update device path
[11:44:25 667][Global][Inf]--Update HUB2-5
[11:44:25 667][HUB2-5][Inf]--Update device path
[11:44:25 667][Global][Inf]--Update HUB2-6
[11:44:25 667][HUB2-6][Inf]--Update device path
[11:44:25 667][Global][Inf]--Update HUB2-7
[11:44:25 667][HUB2-7][Inf]--Update device path
[11:44:25 667][Global][Inf]--Update HUB2-8
[11:44:25 667][HUB2-8][Inf]--Update device path
[11:44:25 667][Global][Inf]--Scan end
[11:44:25 728][HUB2-4][Inf]--Device is connected
[11:44:25 728][HUB2-4][Inf]--Close device handle 0x00000710
[11:44:25 791][HUB2-4][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&2ba1940b&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000434
[11:44:25 852][HUB2-4][Inf]-------------Download DDR.USB-----------
[11:44:25 852][HUB2-4][Inf]--3-2-0-0
[11:44:25 852][HUB2-4][Inf]--Test Identify support
[11:44:25 852][HUB2-4][Inf]--Identify return: 3-2-0-0-0-0
[11:44:25 852][HUB2-4][Inf]--Control write pll reg1 0xfffa0000:0x000000b1
[11:44:26 367][HUB2-4][Inf]--Control write pll reg1 0xfffa0000:0x00005183
[11:44:26 880][HUB2-4][Inf]--Test Identify support
[11:44:26 880][HUB2-4][Inf]--Identify support 6byte
[11:44:26 880][HUB2-4][Inf]--Identify return: 3-2-0-0-0-0
[11:44:26 880][HUB2-4][Inf]--Control write pll reg1 0xfffa0000:0x000000b1
[11:44:27 395][HUB2-4][Inf]--Control write pll reg1 0xfffa0000:0x00005183
[11:44:27 908][HUB2-4][Inf]--Write initial succeed
[11:44:27 908][HUB2-4][Inf]--Upload encrypt at 0xff800228
[11:44:27 908][HUB2-4][Inf]--ulValue = 0xa0f83180
[11:44:27 908][HUB2-4][Inf]--Read encrypt value succeed
[11:44:27 908][HUB2-4][Inf]--Download DDR.USB,size: 65536!
[11:44:27 916][HUB2-4][Inf]--Transfer complete 65536
[11:44:27 916][HUB2-4][Inf]--Run at address 0xfffa0000
[11:44:27 916][HUB2-4][Inf]--RunInRam success
[11:44:27 964][HUB2-4][Inf]--0-0-1-8-0-1-0-0
[11:44:27 964][HUB2-4][Inf]--CheckFileRunState return 1-8
[11:44:27 964][HUB2-4][Inf]--0-0-1-8-0-1-0-0
[11:44:27 964][HUB2-4][Inf]--G12 init
[11:44:27 964][HUB2-4][Inf]--Get Encrpt ulValue = 0xa0f83180
[11:44:27 965][HUB2-4][Inf]--Have Semaphore
[11:44:27 965][HUB2-4][Inf]--Download BL2
[11:44:27 965][HUB2-4]Aml_Libusb_bl2_boot2 start!
[11:44:27 967][HUB2-4]sequence= 0, datasize= 16384, fipOffset= 65536
[11:44:27 974][HUB2-4]sequence= 1, datasize= 49152, fipOffset= 393216
[11:44:27 978][HUB2-4]sequence= 2, datasize= 16384, fipOffset= 229376
[11:44:27 986][HUB2-4]sequence= 3, datasize= 49152, fipOffset= 81920
[11:44:28 003][HUB2-4]sequence= 4, datasize= 16384, fipOffset= 65536
[11:44:28 010][HUB2-4]sequence= 5, datasize= 49152, fipOffset= 393216
[11:44:28 014][HUB2-4]sequence= 6, datasize= 16384, fipOffset= 229376
[11:44:28 023][HUB2-4]sequence= 7, datasize= 49152, fipOffset= 180224
[11:44:28 040][HUB2-4]sequence= 8, datasize= 16384, fipOffset= 65536
[11:44:28 047][HUB2-4]sequence= 9, datasize= 49152, fipOffset= 393216
[11:44:28 051][HUB2-4]sequence= 10, datasize= 16384, fipOffset= 229376
[11:44:28 060][HUB2-4]sequence= 11, datasize= 49152, fipOffset= 245760
[11:44:28 078][HUB2-4]sequence= 12, datasize= 16384, fipOffset= 65536
[11:44:28 085][HUB2-4]sequence= 13, datasize= 49152, fipOffset= 393216
[11:44:28 089][HUB2-4]sequence= 14, datasize= 16384, fipOffset= 229376
[11:44:28 098][HUB2-4]sequence= 15, datasize= 49152, fipOffset= 245760
[11:44:28 116][HUB2-4]sequence= 16, datasize= 16384, fipOffset= 65536
[11:44:28 122][HUB2-4]sequence= 17, datasize= 49152, fipOffset= 393216
[11:44:28 127][HUB2-4]sequence= 18, datasize= 16384, fipOffset= 229376
[11:44:28 137]BL2 report Error, code= 32
[11:44:28 137][HUB2-4]cmd error, cmdType:43984
[11:44:28 137][HUB2-4]Aml_Libusb_bl2_boot2 end!
[11:44:28 137][HUB2-4][Inf]--Release Semaphore
[11:44:40 630][HUB2-4][Inf]--Detect Device remove timeout
[11:44:40 630][HUB2-4][Inf]--Device is connected
[11:44:40 630][HUB2-4][Inf]--Close device handle 0x00000434
[11:44:40 693][HUB2-4][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&2ba1940b&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000434
[11:44:45 770][HUB2-4][Inf]--0-0-1-8
[11:44:45 770][HUB2-4][Err]--CheckFileRunState failed
[11:44:45 776][HUB2-4][Err]--[0x10303004]Romcode/Switch status/Identify/Error result
[11:44:45 777][HUB2-4][Inf]--Close device handle 0x00000434
I'm going to try to using a usb or a different (shorter) cable, but if anyone has any ideas of what I might be doing wrong, please just let me know. I'm very new to this and I'm trying to figure things out, so any resource is welcome.
Thank you.
tdsat said:
The device is a X10 MAX R-TV BOX 4gb/128gb Amlogic S905X3. Since the default firmware was pretty bad ( a summary can be found here (xda-forum post)) I decided to add another firmware.
The first thing I tried was Slimbox firmware that seemed to have an image that matched my exact specs (forum post - project page). However, no matter what I tried, I always seemed to get the same error. The process would fail at 3% on the `Download UBOOT` step with an [0x10303004]Romcode/Switch status/Identify/Error
Ever since I've been trying various images and some of them can be installed but might have other issues - most commonly the Wifi doesn't work or the remote is not recognized - but any image that is supposed to be made for this device fails on the same step with the same error.
These are links to images I tried that have failed
https://androidtvbox.eu/new-s10-max-plus-firmware-for-tv-box-with-s905x3-soc-20190916/ - this has a super slow download speed, let me know if anyone wants it so I can upload it to a better host
https://forum.atvxperience.com/viewtopic.php?t=3694 - this has a password.bin with. I've tried with and without it, no luck
and of course the Slimbox images
Some images that i've tried and got partial success:
https://forum.xda-developers.com/t/...tv-9-mi-box-fw-port-to-amlogic-boxes.4199287/ - No wifi
Y8 PRO(S905X3)(1).zip found HERE - Now wifi, remote not recognised
I've tried other stuff, like different versions of USB burning tool, configs, combinations etc. Some roms don't even boot but the ones that are 'official' always fail at the same step.
This is the full error log
Spoiler: LOG
Code:
[11:43:18 956][Global][Inf]--USB_Burning_Tool soft Version: V2.1.7.3
[11:43:18 956][Global][Inf]--Windows Version: Microsoft Windows 10, Bit: 64
[11:43:18 976][Global][Inf]--Scan usb device
[11:43:18 976][Global][Inf]--Aml scan WorldCup Device
[11:43:18 977][Global][Inf]--Host: USB xHCI Compliant Host Controller
[11:43:18 977][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_43bc&subsys_11421b21&rev_02#4&115a0d29&0&000b#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[11:43:18 977][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&349b2d91&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[11:43:18 977][Global][Inf]-------->[Port0]NoDeviceConnected
[11:43:18 977][Global][Inf]-------->[Port1]NoDeviceConnected
[11:43:18 977][Global][Inf]-------->[Port2]NoDeviceConnected
[11:43:18 977][Global][Inf]-------->[Port3]NoDeviceConnected
[11:43:18 977][Global][Inf]-------->[Port4]NoDeviceConnected
[11:43:18 977][Global][Inf]-------->[Port5]NoDeviceConnected
[11:43:18 977][Global][Inf]-------->[Port6]NoDeviceConnected
[11:43:19 001][Global][Inf]-------->[Port7]Other device
[11:43:19 001][Global][Inf]-------->[Port8]NoDeviceConnected
[11:43:19 001][Global][Inf]-------->[Port9]NoDeviceConnected
[11:43:19 001][Global][Inf]-------->[Port10]NoDeviceConnected
[11:43:19 001][Global][Inf]-------->[Port11]NoDeviceConnected
[11:43:19 002][Global][Inf]--Host: USB xHCI Compliant Host Controller
[11:43:19 002][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_145c&subsys_87471043&rev_00#4&c93bee2&0&0339#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[11:43:19 002][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&2af7b18a&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[11:43:19 002][Global][Inf]-------->[Port0]NoDeviceConnected
[11:43:19 002][Global][Inf]-------->[Port1]Other device
[11:43:19 003][Global][Inf]-------->[Port2]Other device
[11:43:19 003][Global][Inf]-------->[Port3]NoDeviceConnected
[11:43:19 003][Global][Inf]-------->[Port4]NoDeviceConnected
[11:43:19 003][Global][Inf]-------->[Port5]NoDeviceConnected
[11:43:19 003][Global][Inf]-------->[Port6]NoDeviceConnected
[11:43:19 003][Global][Inf]-------->[Port7]NoDeviceConnected
[11:43:19 003][Global][Inf]--Scan USB host controller complete
[11:43:19 003][Global][Inf]--Update data center with HubMap
[11:43:19 003][Global][Inf]--Scan end
[11:43:23 470][Global][Inf]--User click open button
[11:43:28 630][Global][Inf]--Image path D:\TEMP\BOX\Kingnovel_X10_MAX_Firmware_And_Key\8bitDDR x10 max firmware(2019-12)\x10max-esv2.20200804.img
[11:43:28 630][Global][Inf]--OpenImg D:\TEMP\BOX\Kingnovel_X10_MAX_Firmware_And_Key\8bitDDR x10 max firmware(2019-12)\x10max-esv2.20200804.img
[11:43:33 687][Global][Inf]--check img crc success!
[11:43:33 687]Parse platform.conf
[11:43:33 688][Global][Inf]--Parsing burning package
[11:43:33 688][Global][Inf]--Load configuration file C:\Amlogic\USB_Burning_Tool\temp
[11:43:33 688][Global][Inf]--Parse burning configuration file C:\Amlogic\USB_Burning_Tool\temp\burn_config.xml
[11:43:33 691][Global][Inf]--Get burning key
[11:44:20 041][Global][Inf]--Catch DBT_DEVICEARRIVAL
[11:44:20 041][Global][Inf]--Scan usb device
[11:44:20 041][Global][Inf]--Aml scan WorldCup Device
[11:44:20 042][Global][Inf]--Host: USB xHCI Compliant Host Controller
[11:44:20 042][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_43bc&subsys_11421b21&rev_02#4&115a0d29&0&000b#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[11:44:20 042][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&349b2d91&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[11:44:20 043][Global][Inf]-------->[Port0]NoDeviceConnected
[11:44:20 043][Global][Inf]-------->[Port1]NoDeviceConnected
[11:44:20 043][Global][Inf]-------->[Port2]NoDeviceConnected
[11:44:20 043][Global][Inf]-------->[Port3]NoDeviceConnected
[11:44:20 043][Global][Inf]-------->[Port4]NoDeviceConnected
[11:44:20 043][Global][Inf]-------->[Port5]NoDeviceConnected
[11:44:20 043][Global][Inf]-------->[Port6]NoDeviceConnected
[11:44:20 043][Global][Inf]-------->[Port7]Other device
[11:44:20 043][Global][Inf]-------->[Port8]NoDeviceConnected
[11:44:20 043][Global][Inf]-------->[Port9]NoDeviceConnected
[11:44:20 043][Global][Inf]-------->[Port10]NoDeviceConnected
[11:44:20 043][Global][Inf]-------->[Port11]NoDeviceConnected
[11:44:20 044][Global][Inf]--Host: USB xHCI Compliant Host Controller
[11:44:20 044][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_145c&subsys_87471043&rev_00#4&c93bee2&0&0339#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[11:44:20 044][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&2af7b18a&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[11:44:20 044][Global][Inf]-------->[Port0]NoDeviceConnected
[11:44:20 044][Global][Inf]-------->[Port1]Other device
[11:44:20 045][Global][Inf]-------->[Port2]Other device
[11:44:20 045][Global][Inf]-------->[Port3]\\?\usb#vid_1b8e&pid_c003#6&2ba1940b&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[11:44:20 045][Global][Inf]-------->[Port4]NoDeviceConnected
[11:44:20 045][Global][Inf]-------->[Port5]NoDeviceConnected
[11:44:20 045][Global][Inf]-------->[Port6]NoDeviceConnected
[11:44:20 045][Global][Inf]-------->[Port7]NoDeviceConnected
[11:44:20 045][Global][Inf]--Scan USB host controller complete
[11:44:20 045][Global][Inf]--Update data center with HubMap
[11:44:20 045][Global][Inf]--Insert new hub2
[11:44:20 045][Global][Inf]--Update hub2 device data
[11:44:20 046][Global][Inf]--Update HUB2-1
[11:44:20 046][HUB2-1][Inf]--Update device path
[11:44:20 046][Global][Inf]--Update HUB2-2
[11:44:20 046][HUB2-2][Inf]--Update device path
[11:44:20 046][Global][Inf]--Update HUB2-3
[11:44:20 046][HUB2-3][Inf]--Update device path
[11:44:20 046][Global][Inf]--Update HUB2-4 \\?\usb#vid_1b8e&pid_c003#6&2ba1940b&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[11:44:20 046][HUB2-4][Inf]--Update device path
[11:44:20 046][Global][Inf]--Begin thread for HUB2-4
[11:44:20 046][Global][Inf]--Burning thread HUB2-4 start
[11:44:20 046][Global][Inf]--Update HUB2-5
[11:44:20 046][Global][Inf]--Burning thread HUB2-4 begin run
[11:44:20 046][HUB2-5][Inf]--Update device path
[11:44:20 046][Global][Inf]--Update HUB2-6
[11:44:20 047][HUB2-6][Inf]--Update device path
[11:44:20 047][Global][Inf]--Update HUB2-7
[11:44:20 047][HUB2-7][Inf]--Update device path
[11:44:20 047][Global][Inf]--Update HUB2-8
[11:44:20 047][HUB2-8][Inf]--Update device path
[11:44:20 047][Global][Inf]--Add Hub2: \\.\USB#ROOT_HUB30#5&2af7b18a&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} to m_HubDeviceDataVector
[11:44:20 047][Global][Inf]--Scan end
[11:44:22 960][Global][Inf]--User click start button
[11:44:22 962][Global][Inf]--SetErase
[11:44:22 962][Global][Inf]--Enable burning 1
[11:44:22 962][Global][Inf]--Scan usb device
[11:44:22 962][Global][Inf]--Aml scan WorldCup Device
[11:44:22 963][Global][Inf]--Host: USB xHCI Compliant Host Controller
[11:44:22 963][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_43bc&subsys_11421b21&rev_02#4&115a0d29&0&000b#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[11:44:22 963][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&349b2d91&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[11:44:22 963][Global][Inf]-------->[Port0]NoDeviceConnected
[11:44:22 963][Global][Inf]-------->[Port1]NoDeviceConnected
[11:44:22 963][Global][Inf]-------->[Port2]NoDeviceConnected
[11:44:22 963][Global][Inf]-------->[Port3]NoDeviceConnected
[11:44:22 963][Global][Inf]-------->[Port4]NoDeviceConnected
[11:44:22 963][Global][Inf]-------->[Port5]NoDeviceConnected
[11:44:22 963][Global][Inf]-------->[Port6]NoDeviceConnected
[11:44:22 964][Global][Inf]-------->[Port7]Other device
[11:44:22 964][Global][Inf]-------->[Port8]NoDeviceConnected
[11:44:22 964][Global][Inf]-------->[Port9]NoDeviceConnected
[11:44:22 964][Global][Inf]-------->[Port10]NoDeviceConnected
[11:44:22 964][Global][Inf]-------->[Port11]NoDeviceConnected
[11:44:22 964][Global][Inf]--Host: USB xHCI Compliant Host Controller
[11:44:22 964][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_145c&subsys_87471043&rev_00#4&c93bee2&0&0339#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[11:44:22 964][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&2af7b18a&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[11:44:22 964][Global][Inf]-------->[Port0]NoDeviceConnected
[11:44:22 964][Global][Inf]-------->[Port1]Other device
[11:44:22 965][Global][Inf]-------->[Port2]Other device
[11:44:22 965][Global][Inf]-------->[Port3]\\?\usb#vid_1b8e&pid_c003#6&2ba1940b&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[11:44:22 965][Global][Inf]-------->[Port4]NoDeviceConnected
[11:44:22 965][Global][Inf]-------->[Port5]NoDeviceConnected
[11:44:22 965][Global][Inf]-------->[Port6]NoDeviceConnected
[11:44:22 965][Global][Inf]-------->[Port7]NoDeviceConnected
[11:44:22 965][Global][Inf]--Scan USB host controller complete
[11:44:22 965][Global][Inf]--Update data center with HubMap
[11:44:22 965][Global][Inf]--Update hub2 device data
[11:44:22 965][Global][Inf]--Update HUB2-1
[11:44:22 965][HUB2-1][Inf]--Update device path
[11:44:22 965][Global][Inf]--Update HUB2-2
[11:44:22 965][HUB2-2][Inf]--Update device path
[11:44:22 965][Global][Inf]--Update HUB2-3
[11:44:22 965][HUB2-3][Inf]--Update device path
[11:44:22 965][Global][Inf]--Update HUB2-4 \\?\usb#vid_1b8e&pid_c003#6&2ba1940b&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[11:44:22 965][HUB2-4][Inf]--Update device path
[11:44:22 965][Global][Inf]--Update HUB2-5
[11:44:22 965][HUB2-5][Inf]--Update device path
[11:44:22 965][Global][Inf]--Update HUB2-6
[11:44:22 965][HUB2-6][Inf]--Update device path
[11:44:22 965][Global][Inf]--Update HUB2-7
[11:44:22 965][HUB2-7][Inf]--Update device path
[11:44:22 965][Global][Inf]--Update HUB2-8
[11:44:22 965][HUB2-8][Inf]--Update device path
[11:44:22 965][Global][Inf]--Scan end
[11:44:22 984][HUB2-4][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&2ba1940b&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000710
[11:44:23 047][HUB2-4][Inf]--CloneImageProxy
[11:44:23 047][Global][Inf]--OpenImg D:\TEMP\BOX\Kingnovel_X10_MAX_Firmware_And_Key\8bitDDR x10 max firmware(2019-12)\x10max-esv2.20200804.img
[11:44:23 047][HUB2-4][Inf]--Connect path=USB xHCI Compliant Host Controller/P0/P3
[11:44:23 047][HUB2-4][Inf]--Start burning...
[11:44:23 109][HUB2-4][Inf]--------------ERASE BOOTLOADER------------
[11:44:23 218][HUB2-4][Inf]--start SendIdentifyCmd
[11:44:23 218][HUB2-4][Inf]--0-7-0-16
[11:44:23 218][HUB2-4][Inf]--Identify status success
[11:44:23 219][HUB2-4][Inf]-- low_power
[11:44:23 224][HUB2-4][Inf]--Low power command success
[11:44:23 227][HUB2-4][Inf]--Read low power success
[11:44:23 227][HUB2-4][Inf]--bootloader_is_old
[11:44:23 227][HUB2-4][Inf]--Bootloader command success
[11:44:23 230][HUB2-4][Inf]--Bootloader is old
[11:44:23 230][HUB2-4][Inf]--erase_bootloader
[11:44:23 231][HUB2-4][Inf]--Erase command success
[11:44:23 238][HUB2-4][Inf]--Read erase status success
[11:44:23 238][HUB2-4][Inf]--reset
[11:44:23 238][HUB2-4][Inf]--reset command success
[11:44:24 242][Global][Inf]--Catch DBT_DEVICEREMOVECOMPLETE
[11:44:24 243][Global][Inf]--Scan usb device
[11:44:24 243][Global][Inf]--Aml scan WorldCup Device
[11:44:24 244][Global][Inf]--Host: USB xHCI Compliant Host Controller
[11:44:24 244][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_43bc&subsys_11421b21&rev_02#4&115a0d29&0&000b#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[11:44:24 244][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&349b2d91&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[11:44:24 244][Global][Inf]-------->[Port0]NoDeviceConnected
[11:44:24 244][Global][Inf]-------->[Port1]NoDeviceConnected
[11:44:24 244][Global][Inf]-------->[Port2]NoDeviceConnected
[11:44:24 244][Global][Inf]-------->[Port3]NoDeviceConnected
[11:44:24 244][Global][Inf]-------->[Port4]NoDeviceConnected
[11:44:24 244][Global][Inf]-------->[Port5]NoDeviceConnected
[11:44:24 244][Global][Inf]-------->[Port6]NoDeviceConnected
[11:44:24 244][Global][Inf]-------->[Port7]Other device
[11:44:24 244][Global][Inf]-------->[Port8]NoDeviceConnected
[11:44:24 244][Global][Inf]-------->[Port9]NoDeviceConnected
[11:44:24 244][Global][Inf]-------->[Port10]NoDeviceConnected
[11:44:24 245][Global][Inf]-------->[Port11]NoDeviceConnected
[11:44:24 245][Global][Inf]--Host: USB xHCI Compliant Host Controller
[11:44:24 245][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_145c&subsys_87471043&rev_00#4&c93bee2&0&0339#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[11:44:24 245][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&2af7b18a&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[11:44:24 245][Global][Inf]-------->[Port0]NoDeviceConnected
[11:44:24 245][Global][Inf]-------->[Port1]Other device
[11:44:24 246][Global][Inf]-------->[Port2]Other device
[11:44:24 246][Global][Inf]-------->[Port3]NoDeviceConnected
[11:44:24 246][Global][Inf]-------->[Port4]NoDeviceConnected
[11:44:24 246][Global][Inf]-------->[Port5]NoDeviceConnected
[11:44:24 246][Global][Inf]-------->[Port6]NoDeviceConnected
[11:44:24 246][Global][Inf]-------->[Port7]NoDeviceConnected
[11:44:24 246][Global][Inf]--Scan USB host controller complete
[11:44:24 246][Global][Inf]--Update data center with HubMap
[11:44:24 246][Global][Inf]--Update hub2 device data
[11:44:24 246][Global][Inf]--Update HUB2-1
[11:44:24 246][HUB2-1][Inf]--Update device path
[11:44:24 246][Global][Inf]--Update HUB2-2
[11:44:24 246][HUB2-2][Inf]--Update device path
[11:44:24 246][Global][Inf]--Update HUB2-3
[11:44:24 246][HUB2-3][Inf]--Update device path
[11:44:24 246][Global][Inf]--Update HUB2-4
[11:44:24 246][HUB2-4][Inf]--Update device path
[11:44:24 246][Global][Inf]--Update HUB2-5
[11:44:24 246][HUB2-5][Inf]--Update device path
[11:44:24 246][Global][Inf]--Update HUB2-6
[11:44:24 246][HUB2-6][Inf]--Update device path
[11:44:24 246][Global][Inf]--Update HUB2-7
[11:44:24 246][HUB2-7][Inf]--Update device path
[11:44:24 246][Global][Inf]--Update HUB2-8
[11:44:24 246][HUB2-8][Inf]--Update device path
[11:44:24 246][Global][Inf]--Scan end
[11:44:24 293][HUB2-4][Inf]--Device is removed
[11:44:25 663][Global][Inf]--Catch DBT_DEVICEARRIVAL
[11:44:25 663][Global][Inf]--Scan usb device
[11:44:25 663][Global][Inf]--Aml scan WorldCup Device
[11:44:25 664][Global][Inf]--Host: USB xHCI Compliant Host Controller
[11:44:25 664][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_43bc&subsys_11421b21&rev_02#4&115a0d29&0&000b#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[11:44:25 664][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&349b2d91&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[11:44:25 664][Global][Inf]-------->[Port0]NoDeviceConnected
[11:44:25 664][Global][Inf]-------->[Port1]NoDeviceConnected
[11:44:25 664][Global][Inf]-------->[Port2]NoDeviceConnected
[11:44:25 664][Global][Inf]-------->[Port3]NoDeviceConnected
[11:44:25 664][Global][Inf]-------->[Port4]NoDeviceConnected
[11:44:25 664][Global][Inf]-------->[Port5]NoDeviceConnected
[11:44:25 664][Global][Inf]-------->[Port6]NoDeviceConnected
[11:44:25 665][Global][Inf]-------->[Port7]Other device
[11:44:25 665][Global][Inf]-------->[Port8]NoDeviceConnected
[11:44:25 665][Global][Inf]-------->[Port9]NoDeviceConnected
[11:44:25 665][Global][Inf]-------->[Port10]NoDeviceConnected
[11:44:25 665][Global][Inf]-------->[Port11]NoDeviceConnected
[11:44:25 665][Global][Inf]--Host: USB xHCI Compliant Host Controller
[11:44:25 665][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_145c&subsys_87471043&rev_00#4&c93bee2&0&0339#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[11:44:25 665][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&2af7b18a&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[11:44:25 665][Global][Inf]-------->[Port0]NoDeviceConnected
[11:44:25 666][Global][Inf]-------->[Port1]Other device
[11:44:25 666][Global][Inf]-------->[Port2]Other device
[11:44:25 666][Global][Inf]-------->[Port3]\\?\usb#vid_1b8e&pid_c003#6&2ba1940b&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[11:44:25 666][Global][Inf]-------->[Port4]NoDeviceConnected
[11:44:25 666][Global][Inf]-------->[Port5]NoDeviceConnected
[11:44:25 667][Global][Inf]-------->[Port6]NoDeviceConnected
[11:44:25 667][Global][Inf]-------->[Port7]NoDeviceConnected
[11:44:25 667][Global][Inf]--Scan USB host controller complete
[11:44:25 667][Global][Inf]--Update data center with HubMap
[11:44:25 667][Global][Inf]--Update hub2 device data
[11:44:25 667][Global][Inf]--Update HUB2-1
[11:44:25 667][HUB2-1][Inf]--Update device path
[11:44:25 667][Global][Inf]--Update HUB2-2
[11:44:25 667][HUB2-2][Inf]--Update device path
[11:44:25 667][Global][Inf]--Update HUB2-3
[11:44:25 667][HUB2-3][Inf]--Update device path
[11:44:25 667][Global][Inf]--Update HUB2-4 \\?\usb#vid_1b8e&pid_c003#6&2ba1940b&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[11:44:25 667][HUB2-4][Inf]--Update device path
[11:44:25 667][Global][Inf]--Update HUB2-5
[11:44:25 667][HUB2-5][Inf]--Update device path
[11:44:25 667][Global][Inf]--Update HUB2-6
[11:44:25 667][HUB2-6][Inf]--Update device path
[11:44:25 667][Global][Inf]--Update HUB2-7
[11:44:25 667][HUB2-7][Inf]--Update device path
[11:44:25 667][Global][Inf]--Update HUB2-8
[11:44:25 667][HUB2-8][Inf]--Update device path
[11:44:25 667][Global][Inf]--Scan end
[11:44:25 728][HUB2-4][Inf]--Device is connected
[11:44:25 728][HUB2-4][Inf]--Close device handle 0x00000710
[11:44:25 791][HUB2-4][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&2ba1940b&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000434
[11:44:25 852][HUB2-4][Inf]-------------Download DDR.USB-----------
[11:44:25 852][HUB2-4][Inf]--3-2-0-0
[11:44:25 852][HUB2-4][Inf]--Test Identify support
[11:44:25 852][HUB2-4][Inf]--Identify return: 3-2-0-0-0-0
[11:44:25 852][HUB2-4][Inf]--Control write pll reg1 0xfffa0000:0x000000b1
[11:44:26 367][HUB2-4][Inf]--Control write pll reg1 0xfffa0000:0x00005183
[11:44:26 880][HUB2-4][Inf]--Test Identify support
[11:44:26 880][HUB2-4][Inf]--Identify support 6byte
[11:44:26 880][HUB2-4][Inf]--Identify return: 3-2-0-0-0-0
[11:44:26 880][HUB2-4][Inf]--Control write pll reg1 0xfffa0000:0x000000b1
[11:44:27 395][HUB2-4][Inf]--Control write pll reg1 0xfffa0000:0x00005183
[11:44:27 908][HUB2-4][Inf]--Write initial succeed
[11:44:27 908][HUB2-4][Inf]--Upload encrypt at 0xff800228
[11:44:27 908][HUB2-4][Inf]--ulValue = 0xa0f83180
[11:44:27 908][HUB2-4][Inf]--Read encrypt value succeed
[11:44:27 908][HUB2-4][Inf]--Download DDR.USB,size: 65536!
[11:44:27 916][HUB2-4][Inf]--Transfer complete 65536
[11:44:27 916][HUB2-4][Inf]--Run at address 0xfffa0000
[11:44:27 916][HUB2-4][Inf]--RunInRam success
[11:44:27 964][HUB2-4][Inf]--0-0-1-8-0-1-0-0
[11:44:27 964][HUB2-4][Inf]--CheckFileRunState return 1-8
[11:44:27 964][HUB2-4][Inf]--0-0-1-8-0-1-0-0
[11:44:27 964][HUB2-4][Inf]--G12 init
[11:44:27 964][HUB2-4][Inf]--Get Encrpt ulValue = 0xa0f83180
[11:44:27 965][HUB2-4][Inf]--Have Semaphore
[11:44:27 965][HUB2-4][Inf]--Download BL2
[11:44:27 965][HUB2-4]Aml_Libusb_bl2_boot2 start!
[11:44:27 967][HUB2-4]sequence= 0, datasize= 16384, fipOffset= 65536
[11:44:27 974][HUB2-4]sequence= 1, datasize= 49152, fipOffset= 393216
[11:44:27 978][HUB2-4]sequence= 2, datasize= 16384, fipOffset= 229376
[11:44:27 986][HUB2-4]sequence= 3, datasize= 49152, fipOffset= 81920
[11:44:28 003][HUB2-4]sequence= 4, datasize= 16384, fipOffset= 65536
[11:44:28 010][HUB2-4]sequence= 5, datasize= 49152, fipOffset= 393216
[11:44:28 014][HUB2-4]sequence= 6, datasize= 16384, fipOffset= 229376
[11:44:28 023][HUB2-4]sequence= 7, datasize= 49152, fipOffset= 180224
[11:44:28 040][HUB2-4]sequence= 8, datasize= 16384, fipOffset= 65536
[11:44:28 047][HUB2-4]sequence= 9, datasize= 49152, fipOffset= 393216
[11:44:28 051][HUB2-4]sequence= 10, datasize= 16384, fipOffset= 229376
[11:44:28 060][HUB2-4]sequence= 11, datasize= 49152, fipOffset= 245760
[11:44:28 078][HUB2-4]sequence= 12, datasize= 16384, fipOffset= 65536
[11:44:28 085][HUB2-4]sequence= 13, datasize= 49152, fipOffset= 393216
[11:44:28 089][HUB2-4]sequence= 14, datasize= 16384, fipOffset= 229376
[11:44:28 098][HUB2-4]sequence= 15, datasize= 49152, fipOffset= 245760
[11:44:28 116][HUB2-4]sequence= 16, datasize= 16384, fipOffset= 65536
[11:44:28 122][HUB2-4]sequence= 17, datasize= 49152, fipOffset= 393216
[11:44:28 127][HUB2-4]sequence= 18, datasize= 16384, fipOffset= 229376
[11:44:28 137]BL2 report Error, code= 32
[11:44:28 137][HUB2-4]cmd error, cmdType:43984
[11:44:28 137][HUB2-4]Aml_Libusb_bl2_boot2 end!
[11:44:28 137][HUB2-4][Inf]--Release Semaphore
[11:44:40 630][HUB2-4][Inf]--Detect Device remove timeout
[11:44:40 630][HUB2-4][Inf]--Device is connected
[11:44:40 630][HUB2-4][Inf]--Close device handle 0x00000434
[11:44:40 693][HUB2-4][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&2ba1940b&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000434
[11:44:45 770][HUB2-4][Inf]--0-0-1-8
[11:44:45 770][HUB2-4][Err]--CheckFileRunState failed
[11:44:45 776][HUB2-4][Err]--[0x10303004]Romcode/Switch status/Identify/Error result
[11:44:45 777][HUB2-4][Inf]--Close device handle 0x00000434
I'm going to try to using a usb or a different (shorter) cable, but if anyone has any ideas of what I might be doing wrong, please just let me know. I'm very new to this and I'm trying to figure things out, so any resource is welcome.
Thank you.
Click to expand...
Click to collapse
Untick 'erase bootloader' in the USB Tool software for the ROMs that fail to flash.
4llerbuntu said:
Untick 'erase bootloader' in the USB Tool software for the ROMs that fail to flash.
Click to expand...
Click to collapse
Thanks for the reply.
When I do that, even though the process finishes, the device won't even seem to power up. There's one led and it won't turn on and nothing else happens.
Also, for some reason, USB burning tool seems to ignore the the settings I select now. Maybe it's all messed up after all the times i've installed/uninstalled it and all the versions I've tried...
tdsat said:
Thanks for the reply.
When I do that, even though the process finishes, the device won't even seem to power up. There's one led and it won't turn on and nothing else happens.
Also, for some reason, USB burning tool seems to ignore the the settings I select now. Maybe it's all messed up after all the times i've installed/uninstalled it and all the versions I've tried...
Click to expand...
Click to collapse
You don't have the right stock rom.
These Chinese boxes are *";@;#&#&#:£;
There's so many component variants, the brand names are almost irrelevant
4llerbuntu said:
You don't have the right stock rom.
These Chinese boxes are *";@;#&#&#:£;
There's so many component variants, the brand names are almost irrelevant
Click to expand...
Click to collapse
Maybe ¯\_(ツ)_/¯
I've downloaded everything I found online and it's always the same. Maybe the device is busted...
At this point I'll just take the 'L' and accept I'll never fix it.
Do you have any suggestions for a relatively cheap box I can buy, that might also be customizable?
Thank you.
tdsat said:
Maybe ¯\_(ツ)_/¯
I've downloaded everything I found online and it's always the same. Maybe the device is busted...
At this point I'll just take the 'L' and accept I'll never fix it.
Do you have any suggestions for a relatively cheap box I can buy, that might also be customizable?
Thank you.
Click to expand...
Click to collapse
Sadly I don't really know these boxes so well.
I'd recommend buying a recent SOC though. Not the S905 series. They are too old now
4llerbuntu said:
Sadly I don't really know these boxes so well.
I'd recommend buying a recent SOC though. Not the S905 series. They are too old now
Click to expand...
Click to collapse
This is the first box I bought, I have not idea what I'm doing Anyway, thanks for the replies man. I guess I'll have to check the release day of the chip from now on
I have an HP96 pro + 3G / 32G 9377 for a few months no picture on TV only a blue light on the device no fiamware can be transferred to the device by USB since any flashing procedure by AmlogicBurning all versions gives the following message (HELP ME please):
[17:49:02 725][Global][Inf]–L'utilisateur clique sur le bouton d'actualisation
[17:49:02 740][Global][Inf]–Le fil de gravure HUB2-3 démarre
[17:49:02 790][HUB2 -3][Inf]–Ouvrir le handle de périphérique \\?\usb#vid_1b8e&pid_c003#5&33d64ffb&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000634
[17:49:02 844][HUB2-3][Inf]–Connect path=Contrôleur hôte PCI vers USB standard étendu/P0/P2
[17:49:02 844][HUB2-3][Inf]–Démarrer la gravure…
[17:49:02 895][HUB2-3][Inf]— ———–ERASE BOOTLOADER————
[17:49:02 995][HUB2-3][Inf]–start SendIdentifyCmd
[17:49:02 996][HUB2-3][Inf]–2-2-0-0
[17:49:02 997][HUB2-3][Inf]————-Télécharger DDR.USB— ——–
[17:49:02 998][HUB2-3][Inf]–2-2-0-0
[17:49:02 998][HUB2-3][Inf]–Contrôle écriture pll reg1 0xd9000000 : 0x000000b1
[17:49:03 499][HUB2-3][Inf]–Contrôle écriture pll reg1 0xd9000000:0x00005183
[17:49:04 000][HUB2-3][Inf]–Contrôle écriture pll reg1 0xd9000000:0x000000b1
[ 17:49:04 501][HUB2-3][Inf]–Contrôle écriture pll reg1 0xd9000000:0x00005183
[17:49:05 002][HUB2-3][Inf]–Écriture initiale
réussie [17:49:05 002 ][HUB2-3][Inf]–Télécharger le chiffrement à 0xc8100228
[17:49:05 003][HUB2-3][Inf]–ulValue = 0xadfc318c
[17:49:05 003][HUB2-3][Inf] –Lecture de la valeur de chiffrement réussi
[17:49:05 003][HUB2-3][Inf]–Téléchargement DDR.USB,taille : 49152 !
[17:49:05 018][HUB2-3][Inf]–Transfert terminé 49152
[17:49:05 019][HUB2-3][Inf]–Exécuter à l'adresse 0xd9000000
[17:49:05 021][ HUB2-3][Inf]–RunInRam succès
[17:49:05 501][HUB2-3][Inf]–2-2-0-0-0-1-0-0
[17:49:05 501] [HUB2-3][Inf]–CheckFileRunState success
[17:49:05 502][HUB2-3][Inf]–runResult:0x 0,paraMagic:0x7856efab
[17:49:05 502][HUB2-3][ Inf]–ddrCapacity:0x c00
[17:49:05 503][HUB2-3][Inf]–2-2-0-0-0-1-0-0
[17:49:05 503][HUB2- 3][Inf]–Get Encrpt ulValue = 0xadfc318c
[17:49:05 503][HUB2-3][Err]–télécharger 1 fois !
[17:49:05 504][HUB2-3][Inf]–Télécharger le tampon UBOOT.USB à 0x0200c000
[17:49:05 687][HUB2-3][Inf]–Transfert terminé
[17:49:05 888 ][HUB2-3][Inf]–2-2-0-0-0-1-0-0
[17:49:05 888][HUB2-3][Inf]–Télécharger le tampon DDR.USB à 0xd9000000
[17 :49:05 899][HUB2-3][Inf]–Transfert terminé
[17:49:05 907][HUB2-3][Inf]–DownCheckPara réussi
[17:49:05 908][HUB2-3][ Inf]–2-2-0-0-0-1-0-0
[17:49:05 908][HUB2-3][Inf]–RunInAddr à l'adresse 0xd9000000
[17:49:05 975][HUB2-3][Err]–generatedAddSum:0x3bb26b2e;srcAddSum:0x97f3b075;runResult:0x e6;paraMagic:0x7856efab[17 :49:05 975][HUB2-3][Inf]–ReadCheckPara a échoué
[17:49:05 975][HUB2-3][Inf]–m_iFileIndex:0
[17:49:06 037][HUB2-3] [Err]–[0x11000902]Romcode/Read CheckPara/Error result[17:49:06 041][HUB2-3][Inf]–Close Device Handle 0x00000634
I recovered mine using the pin short method which involves opening the box and shorting the chip with screw driver, common errors i had where all caused by my "usb a to usb a" cable being too long, i had to reduce it to about 5-6 inches long before it flashed successfully
spwc123 said:
I recovered mine using the pin short method which involves opening the box and shorting the chip with screw driver, common errors i had where all caused by my "usb a to usb a" cable being too long, i had to reduce it to about 5-6 inches long before it flashed successfully
Click to expand...
Click to collapse
Theres also different motherboards in these boxes although the shell looks the same so you may have to open it up to see which motherboard you have in order to get correct firmware
spwc123 said:
Theres also different motherboards in these boxes although the shell looks the same so you may have to open it up to see which motherboard you have in order to get correct firmware
Click to expand...
Click to collapse
Good evening,
For your information, I have already tried all the solutions you have proposed.
I have tried various 5v2a transformers 5v2a - 5v2.5a - 6v3a
and various USB cables and I tried various temperatures at Amlogic burning.
And as for pins 5 and 6, it is by bypassing them that I manage to connect the PC to the Box
But, when I try to transfer the image to the box by Amlogic Burning, the transfer stops at 4% the operation log is the one I posted at the beginning of my help request
the img files I have used so far are as follows:
SCV4-Test1-Blue-PCB-H96ProPlus
SCV4-A7.1.2-x64-Alfawise.H96.ProPlus
OTA-SCV7A-A7.1.2-x64-Alfawise.H96.ProPlus
H96 PRO PLUS_S912_IMG_3-32GB_Q9377_08032017_AndroidTVBox.eu
aml_s912_q9377-H96PROPLUS(3+32_kdi16.1)_mac-20161107
aml_s912_q9377-H96ProPlus(3+32)_mac-20170308
aml_s912_q9377_H96Pro+(3+32_kodi16.1)_mac-20161228
aml_711_s912_q9377-H96_mac-20170424
aml_7.1_s912_q9377-H96PROPLUS-KDMC_mac-20170619
aml_7.1_s912_q9377-H96PROPLUS_mac-20170422
but, always the transfer stops at 4% maximum
aml_7.1.2_s912_q9377-H96PROPLUS_mac-20180409_shmod-k4-stockbl
the v3 ddr4 h96 pro plus has issues accepting bootloader on certain roms so this one was made for your version specifically.
i couldnt understand language in your log file as i speak english but paste that rom name into google search and look for that rom, i would paste a link but i dont think its allowed.
My box is different version from yours so i wouldnt know what else to suggest but hopefully some more experienced members can help further but i hope you get it fixed.
** spwc123 ** Pardon my english
I refer to the google translation
I post the last log below and hope someone helps me out.
*************************************************************************
[00:04:31 016][Global][Inf]--USB_Burning_Tool soft Version: V2.1.9.0
[00:04:31 016][Global][Inf]--Windows Version: Microsoft Windows 7, Bit: 64
[00:04:31 048][Global][Inf]--Scan usb device
[00:04:31 048][Global][Inf]--Aml scan WorldCup Device
[00:04:31 057][Global][Inf]--Host: Contrôleur hôte PCI vers USB standard étendu
[00:04:31 057][Global][Inf]--DevPath:\\?\pci#ven_1002&dev_4396&subsys_363f103c&rev_00#3&2411e6fe&1&92#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[00:04:31 057][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&569ceb1&2#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[00:04:31 057][Global][Inf]-------->[Port0]NoDeviceConnected
[00:04:31 057][Global][Inf]-------->[Port1]NoDeviceConnected
[00:04:31 147][Global][Inf]-------->[Port2]Other device
[00:04:31 147][Global][Inf]-------->[Port3]NoDeviceConnected
[00:04:31 147][Global][Inf]-------->[Port4]NoDeviceConnected
[00:04:31 241][Global][Inf]-------->[Port5]\\?\usb#vid_1b8e&pid_c003#5&289286b9&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[00:04:31 242][Global][Inf]--Host: Contrôleur hôte PCI vers USB standard étendu
[00:04:31 242][Global][Inf]--DevPath:\\?\pci#ven_1002&dev_4396&subsys_363f103c&rev_00#3&2411e6fe&1&9a#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[00:04:31 242][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&28233f0d&3#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[00:04:31 242][Global][Inf]-------->[Port0]NoDeviceConnected
[00:04:31 242][Global][Inf]-------->[Port1]NoDeviceConnected
[00:04:31 242][Global][Inf]-------->[Port2]NoDeviceConnected
[00:04:31 242][Global][Inf]-------->[Port3]NoDeviceConnected
[00:04:31 242][Global][Inf]-------->[Port4]NoDeviceConnected
[00:04:31 242][Global][Inf]-------->[Port5]NoDeviceConnected
[00:04:31 244][Global][Inf]--Host: Contrôleur hôte USB OpenHCD standard
[00:04:31 244][Global][Inf]--DevPath:\\?\pci#ven_1002&dev_4397&subsys_363f103c&rev_00#3&2411e6fe&1&90#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[00:04:31 244][Global][Inf]---->Roothub:USB#ROOT_HUB#4&5d68728&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[00:04:31 244][Global][Inf]-------->[Port0]NoDeviceConnected
[00:04:31 244][Global][Inf]-------->[Port1]NoDeviceConnected
[00:04:31 244][Global][Inf]-------->[Port2]NoDeviceConnected
[00:04:31 245][Global][Inf]--Host: Contrôleur hôte USB OpenHCD standard
[00:04:31 246][Global][Inf]--DevPath:\\?\pci#ven_1002&dev_4397&subsys_363f103c&rev_00#3&2411e6fe&1&98#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[00:04:31 246][Global][Inf]---->Roothub:USB#ROOT_HUB#4&346e37f9&3#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[00:04:31 246][Global][Inf]-------->[Port0]NoDeviceConnected
[00:04:31 246][Global][Inf]-------->[Port1]NoDeviceConnected
[00:04:31 306][Global][Inf]-------->[Port2]Other device
[00:04:31 307][Global][Inf]--Host: Contrôleur hôte USB OpenHCD standard
[00:04:31 307][Global][Inf]--DevPath:\\?\pci#ven_1002&dev_4398&subsys_363f103c&rev_00#3&2411e6fe&1&91#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[00:04:31 307][Global][Inf]---->Roothub:USB#ROOT_HUB#4&1b45cf9b&3#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[00:04:31 307][Global][Inf]-------->[Port0]NoDeviceConnected
[00:04:31 307][Global][Inf]-------->[Port1]NoDeviceConnected
[00:04:31 307][Global][Inf]-------->[Port2]NoDeviceConnected
[00:04:31 309][Global][Inf]--Host: Contrôleur hôte USB OpenHCD standard
[00:04:31 309][Global][Inf]--DevPath:\\?\pci#ven_1002&dev_4398&subsys_363f103c&rev_00#3&2411e6fe&1&99#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[00:04:31 309][Global][Inf]---->Roothub:USB#ROOT_HUB#4&352217f&3#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[00:04:31 309][Global][Inf]-------->[Port0]NoDeviceConnected
[00:04:31 309][Global][Inf]-------->[Port1]NoDeviceConnected
[00:04:31 309][Global][Inf]-------->[Port2]NoDeviceConnected
[00:04:31 309][Global][Inf]--Scan USB host controller complete
[00:04:31 309][Global][Inf]--Update data center with HubMap
[00:04:31 309][Global][Inf]--Insert new hub1
[00:04:31 309][Global][Inf]--Update hub1 device data
[00:04:31 309][Global][Inf]--Update HUB1-1
[00:04:31 309][HUB1-1][Inf]--Update device path
[00:04:31 309][Global][Inf]--Update HUB1-2
[00:04:31 309][HUB1-2][Inf]--Update device path
[00:04:31 309][Global][Inf]--Update HUB1-3
[00:04:31 309][HUB1-3][Inf]--Update device path
[00:04:31 309][Global][Inf]--Update HUB1-4
[00:04:31 309][HUB1-4][Inf]--Update device path
[00:04:31 309][Global][Inf]--Update HUB1-5
[00:04:31 310][HUB1-5][Inf]--Update device path
[00:04:31 310][Global][Inf]--Update HUB1-6 \\?\usb#vid_1b8e&pid_c003#5&289286b9&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[00:04:31 310][HUB1-6][Inf]--Update device path
[00:04:31 310][Global][Inf]--Begin thread for HUB1-6
[00:04:31 310][Global][Inf]--Add Hub1: \\.\USB#ROOT_HUB20#4&569ceb1&2#{f18a0e88-c30c-11d0-8815-00a0c906bed8} to m_HubDeviceDataVector
[00:04:31 310][Global][Inf]--Scan end
[00:04:31 312][Global][Inf]--Burning thread HUB1-6 start
[00:04:31 312][Global][Inf]--Burning thread HUB1-6 begin run
[00:04:34 301][Global][Inf]--User click open button
[00:04:39 334][Global][Inf]--Image path C:\Users\akabbaj\Downloads\aml_7.1.2_s912_q9377-S912_mac-20180315_H96PROPLUS_LOGO_Shonk\aml_7.1_s912_q9377_mac-20180315_H96PROPLUS_LOGO_Shonk.img
[00:04:39 334][Global][Inf]--OpenImg C:\Users\akabbaj\Downloads\aml_7.1.2_s912_q9377-S912_mac-20180315_H96PROPLUS_LOGO_Shonk\aml_7.1_s912_q9377_mac-20180315_H96PROPLUS_LOGO_Shonk.img
[00:05:06 741][Global][Inf]--check img crc success!
[00:05:06 834]Parse platform.conf
[00:05:06 929][Global][Inf]--Parsing burning package
[00:05:06 930][Global][Inf]--Load configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp
[00:05:06 930][Global][Inf]--Parse burning configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp\burn_config.xml
[00:05:07 344][Global][Inf]--Get burning key
[00:05:19 568][Global][Inf]--User click start button
[00:05:19 599][Global][Inf]--SetErase
[00:05:19 644][Global][Inf]--Enable burning 1
[00:05:19 645][Global][Inf]--Scan usb device
[00:05:19 645][Global][Inf]--Aml scan WorldCup Device
[00:05:19 677][Global][Inf]--Host: Contrôleur hôte PCI vers USB standard étendu
[00:05:19 677][Global][Inf]--DevPath:\\?\pci#ven_1002&dev_4396&subsys_363f103c&rev_00#3&2411e6fe&1&92#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[00:05:19 677][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&569ceb1&2#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[00:05:19 677][Global][Inf]-------->[Port0]NoDeviceConnected
[00:05:19 677][Global][Inf]-------->[Port1]NoDeviceConnected
[00:05:19 699][HUB1-6][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&289286b9&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000868
[00:05:19 727][Global][Inf]-------->[Port2]Other device
[00:05:19 727][Global][Inf]-------->[Port3]NoDeviceConnected
[00:05:19 727][Global][Inf]-------->[Port4]NoDeviceConnected
[00:05:19 750][HUB1-6][Inf]--CloneImageProxy
[00:05:19 750][Global][Inf]--OpenImg C:\Users\akabbaj\Downloads\aml_7.1.2_s912_q9377-S912_mac-20180315_H96PROPLUS_LOGO_Shonk\aml_7.1_s912_q9377_mac-20180315_H96PROPLUS_LOGO_Shonk.img
[00:05:19 768][HUB1-6][Inf]--Connect path=Contrôleur hôte PCI vers USB standard étendu/P0/P5
[00:05:19 784][HUB1-6][Inf]--Start burning...
[00:05:19 790][Global][Inf]-------->[Port5]\\?\usb#vid_1b8e&pid_c003#5&289286b9&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[00:05:19 792][Global][Inf]--Host: Contrôleur hôte PCI vers USB standard étendu
[00:05:19 792][Global][Inf]--DevPath:\\?\pci#ven_1002&dev_4396&subsys_363f103c&rev_00#3&2411e6fe&1&9a#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[00:05:19 792][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&28233f0d&3#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[00:05:19 792][Global][Inf]-------->[Port0]NoDeviceConnected
[00:05:19 792][Global][Inf]-------->[Port1]NoDeviceConnected
[00:05:19 792][Global][Inf]-------->[Port2]NoDeviceConnected
[00:05:19 792][Global][Inf]-------->[Port3]NoDeviceConnected
[00:05:19 792][Global][Inf]-------->[Port4]NoDeviceConnected
[00:05:19 792][Global][Inf]-------->[Port5]NoDeviceConnected
[00:05:19 809][Global][Inf]--Host: Contrôleur hôte USB OpenHCD standard
[00:05:19 809][Global][Inf]--DevPath:\\?\pci#ven_1002&dev_4397&subsys_363f103c&rev_00#3&2411e6fe&1&90#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[00:05:19 809][Global][Inf]---->Roothub:USB#ROOT_HUB#4&5d68728&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[00:05:19 809][Global][Inf]-------->[Port0]NoDeviceConnected
[00:05:19 809][Global][Inf]-------->[Port1]NoDeviceConnected
[00:05:19 809][Global][Inf]-------->[Port2]NoDeviceConnected
[00:05:19 811][Global][Inf]--Host: Contrôleur hôte USB OpenHCD standard
[00:05:19 811][Global][Inf]--DevPath:\\?\pci#ven_1002&dev_4397&subsys_363f103c&rev_00#3&2411e6fe&1&98#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[00:05:19 811][Global][Inf]---->Roothub:USB#ROOT_HUB#4&346e37f9&3#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[00:05:19 811][Global][Inf]-------->[Port0]NoDeviceConnected
[00:05:19 811][Global][Inf]-------->[Port1]NoDeviceConnected
[00:05:19 836][HUB1-6][Inf]--------------ERASE BOOTLOADER------------
[00:05:19 862][Global][Inf]-------->[Port2]Other device
[00:05:19 864][Global][Inf]--Host: Contrôleur hôte USB OpenHCD standard
[00:05:19 864][Global][Inf]--DevPath:\\?\pci#ven_1002&dev_4398&subsys_363f103c&rev_00#3&2411e6fe&1&91#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[00:05:19 864][Global][Inf]---->Roothub:USB#ROOT_HUB#4&1b45cf9b&3#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[00:05:19 864][Global][Inf]-------->[Port0]NoDeviceConnected
[00:05:19 864][Global][Inf]-------->[Port1]NoDeviceConnected
[00:05:19 864][Global][Inf]-------->[Port2]NoDeviceConnected
[00:05:19 865][Global][Inf]--Host: Contrôleur hôte USB OpenHCD standard
[00:05:19 865][Global][Inf]--DevPath:\\?\pci#ven_1002&dev_4398&subsys_363f103c&rev_00#3&2411e6fe&1&99#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[00:05:19 866][Global][Inf]---->Roothub:USB#ROOT_HUB#4&352217f&3#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[00:05:19 866][Global][Inf]-------->[Port0]NoDeviceConnected
[00:05:19 866][Global][Inf]-------->[Port1]NoDeviceConnected
[00:05:19 866][Global][Inf]-------->[Port2]NoDeviceConnected
[00:05:19 866][Global][Inf]--Scan USB host controller complete
[00:05:19 866][Global][Inf]--Update data center with HubMap
[00:05:19 866][Global][Inf]--Update hub1 device data
[00:05:19 866][Global][Inf]--Update HUB1-1
[00:05:19 866][HUB1-1][Inf]--Update device path
[00:05:19 866][Global][Inf]--Update HUB1-2
[00:05:19 866][HUB1-2][Inf]--Update device path
[00:05:19 866][Global][Inf]--Update HUB1-3
[00:05:19 866][HUB1-3][Inf]--Update device path
[00:05:19 866][Global][Inf]--Update HUB1-4
[00:05:19 866][HUB1-4][Inf]--Update device path
[00:05:19 866][Global][Inf]--Update HUB1-5
[00:05:19 866][HUB1-5][Inf]--Update device path
[00:05:19 866][Global][Inf]--Update HUB1-6 \\?\usb#vid_1b8e&pid_c003#5&289286b9&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[00:05:19 866][HUB1-6][Inf]--Update device path
[00:05:19 866][Global][Inf]--Scan end
[00:05:19 936][HUB1-6][Inf]--start SendIdentifyCmd
[00:05:20 015][HUB1-6][Inf]--2-2-0-0
[00:05:20 027][HUB1-6][Inf]-------------Download DDR.USB-----------
[00:05:20 035][HUB1-6][Inf]--Close device handle 0x00000868
[00:05:20 085][HUB1-6][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&289286b9&0&6#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000868
[00:05:20 136][HUB1-6][Inf]--2-2-0-0
[00:05:20 136][HUB1-6][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[00:05:20 637][HUB1-6][Inf]--Control write pll reg1 0xd9000000:0x00005183
[00:05:21 138][HUB1-6][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[00:05:21 639][HUB1-6][Inf]--Control write pll reg1 0xd9000000:0x00005183
[00:05:22 141][HUB1-6][Inf]--Write initial succeed
[00:05:22 141][HUB1-6][Inf]--Upload encrypt at 0xc8100228
[00:05:22 142][HUB1-6][Inf]--ulValue = 0xadfc318c
[00:05:22 142][HUB1-6][Inf]--Read encrypt value succeed
[00:05:22 142][HUB1-6][Inf]--Download DDR.USB,size: 49152!
[00:05:22 154][HUB1-6][Inf]--Transfer complete 49152
[00:05:22 155][HUB1-6][Inf]--Run at address 0xd9000000
[00:05:22 156][HUB1-6][Inf]--RunInRam success
[00:05:22 498][HUB1-6][Inf]--2-2-0-0-0-1-0-0
[00:05:22 499][HUB1-6][Inf]--CheckFileRunState succeed
[00:05:22 500][HUB1-6][Inf]--runResult:0x 0,paraMagic:0x7856efab
[00:05:22 500][HUB1-6][Inf]--ddrCapacity:0x c00
[00:05:22 503][HUB1-6][Inf]--2-2-0-0-0-1-0-0
[00:05:22 503][HUB1-6][Inf]--Get Encrpt ulValue = 0xadfc318c
[00:05:22 503][HUB1-6][Err]--download 1 time!
[00:05:22 503][HUB1-6][Inf]--Download UBOOT.USB buffer at 0x0200c000
[00:05:22 612][HUB1-6][Inf]--Transfer complete
[00:05:22 813][HUB1-6][Inf]--2-2-0-0-0-1-0-0
[00:05:22 813][HUB1-6][Inf]--Download DDR.USB buffer at 0xd9000000
[00:05:22 824][HUB1-6][Inf]--Transfer complete
[00:05:22 832][HUB1-6][Inf]--DownCheckPara succeed
[00:05:22 833][HUB1-6][Inf]--2-2-0-0-0-1-0-0
[00:05:22 833][HUB1-6][Inf]--RunInAddr at address 0xd9000000
[00:05:22 880][HUB1-6][Err]--generatedAddSum:0x569c3dc1;srcAddSum:0xe1a07a39;runResult:0x e6;paraMagic:0x7856efab
[00:05:22 880][HUB1-6][Inf]--ReadCheckPara failed
[00:05:22 880][HUB1-6][Inf]--m_iFileIndex:0
[00:05:22 962][HUB1-6][Err]--[0x11000902]Romcode/Read CheckPara/Error result
[00:05:22 966][HUB1-6][Inf]--Close device handle 0x00000868
[00:05:27 992][Global][War]--User click stop button
[00:05:27 994][Global][Inf]--Enable burning 0
spwc123Thanks for your precious advice.
I still have the same problem I think this box is dead
spwc123 said:
My box is different version from yours so i wouldnt know what else to suggest but hopefully some more experienced members can help further but i hope you get it fixed.
Click to expand...
Click to collapse
HI There, I have a lpddr3 version of this box, and short circuit method makes the lights flash purple once then switch off. Just can't get it to connect to pc. Any ideas?
Thanks