Gear S stock BGL firmware help - Samsung Gear S

Hi everyone!
I still have my Samsung Gear S and I love it...
It's was running the latest for my area (Bulgaria) firmware - 2.2.1.4 (R750XXU2BOL2)
Recently I had some problems with empty notifications from different apps and decided to flash different firmware - I found several sources for the firmware and also discovered that in some areas the firmware is higher - up to 2.3.0.1 for Malaysia and Ukraine.
I was able to flash successfully 2.3.0.1 Malaysia firmware - it was slightly different and very fast but draining the battery too fast.
Then I flashed the Ukraine firmware and it was really good but the problem with the empty notifications was still there so I decided to go back to the stock Bulgarian BGL 2.2.1.4 firmware.
No problems flashing back the BGL firmware but for my surprise the watch started in German language (not Bulgarian).
Then tried UK 2.2.1.4 firmware and again the watch started in German language...
I cannot get it back to Bulgarian language - I downloaded BGL firmware from 5 or 6 different sources (actually the same file) and still starting in German.
Any idea where can I find a real Bulgarian firmware or am I doing a mistake when flashing? (using Odin 3.14.4 software with one file and 4 files (BL, AP, CSC..) flashing)
Thank you!

Just a quick update...
After several attempts to install back the BGL firmware I still have the watch starting in German language (obviously not BGL firmware) and now my watch will not recognize my Bulgarian sim card...
Any ideas how to resolve the situation???

Related

[Q] Some firmware Questions...

Hi everyone, I just bought a Samsung Galaxy SII here in China (its a imported phone, NOT chinese seems to be from France originally). It came with ZSKE7 firmware installed (unbranded) and have Korean, Chinese simp & Trad, British & american english and Hongkong input.
I tried to upgrade the firmware using KIES, but it just said "no available updates", so I started to fiddle around with the CSC (customer sales code) and I changed it to BRI (Britain) from KOR (Korean). And voila!! Kies said it had a firmware update available.
So I upgraded the firmware and ended up with ZSKG2 (still 2.3.3) and I cant say I noticed any big changes after the update.
My question now is, does anybody know if there is a Generic firmware available, with ALL languages (for example Swedish, Finnish & German) and that also have all the support for the ZSKG2 languages (Chinese simp/trad)?
Best regards
Bumbi
Nope, there is no Official Stock ROM with all languages.
However, if you are interested in English + Chinese and have all the apps that China have Samsung removed, you can look at Hong Kong rom.
Thanks LiFE1688, I will give it a try , at the moment am I busy "cooking" my own version. Will see how it goes.

[Q] PLEASE HELP ! Problem with CSC

Hello,
first, sorry for my Bad English...
So here is my Problem:
Bought S3 in Germany, also CSC = DBT
I flashed Omega V5.1 then i wanted back to origin Firmware, so i used TriangleAway and then flash the original Firmware with DBT (Downloaded it here in the Forum), now the Firmware is on the Phone, but KIES say it is not supportet...
KIES show CSC = EUR
How can this be? I flashed DBT, i can not change it with *#272*imei#, because there is only EUR to select
CAN PLEASE ANYBODY HELP ?!?!?
I recently wanted to change my csc to make my s3 updatable via KIES. Found that if I flashed to the UK (BTU) stock, when I did *#272*imei#, it presented me with many more options than my actual carrier stock.
I used to have an ATL CSC (Vodafone Spain) and I flashed my phone with the German firmware. After flashing it, I still had the ATL CSC but I did a hard reset and now it's DBT. So, I recommend you to do a hard reset but bear in mind you'll lose everything you have: SMS, contacts, etc.
Roastario said:
I recently wanted to change my csc to make my s3 updatable via KIES. Found that if I flashed to the UK (BTU) stock, when I did *#272*imei#, it presented me with many more options than my actual carrier stock.
Click to expand...
Click to collapse
Whst network were you on before?

is 6.0 update only vodafone now?

all i see are vodefone uploads athttp://live.samsung-updates.com/ my question is:
my g925F is a NTL where is the update for us how much longer do we have to wait? can i upgrade using the xeu version?
there is the XEU update also,you can use that,and if you read a little bit,you don't had to ask this question....:good:
My g925F is a VIA o2 German, I have already installed VDF German FW and later XEU FW (No Branding) too, no known issues. That works fine,Knox 0x0

SK Telecom To Any Latest Firmwate

Hello Everyone
Is it possible to convert a gear s from SK Telecom To the Latest Turkey Firmware?
I tried via Odin but was Getting Bootloops so Had to Re flash SK Telecom again.
I tried going into recovery and do a factory reset but could not do that too.
Any Guide and help will be highly appreciated.
Regards
Suleman Talpur.
Mate 9.
I do it before with my Gear S
first time when i buy it, it's was on SK Telecom Firmware
But i flash XEO on it with no problems
Now am on the latest version OL2
......
Try to flash XEO first, if passed then flash Turkey Firmware
......
Best luck
The Watchbis Region Dependent and it did not accept The European Firmware but now its On Lateat Singapore International Firmware
Suleman Talpur.
Mate 9.
I flashed latest UK firmware, BOL2, without any problem...

Any way to change CSC?

Hi all,
Tab S6 in my country is only limited to 128gb version, while I heavily rely on Lightroom mobile and sometimes need a lot of space for my raw files. This made me buy 256gb variant abroad.
My country code is XEO (Poland) and my device was bought in Germany (DBT). Is there an option to change CSC (including paid programs) to do this?
Of course I have tried Odin and XEO firmware, but it turns out that it's multi-csc and always sticks to original DBT. I have also tried *#272# code and flashing with SIM card in and out, but CSC always stays DBT.
Any of you had any luck?
Anyone out there? I am interested in this as well - I have the international version and am in the US on TMB but have a CSC indicates I am in Poland. I worry that I am not getting timely updates - I hear than TMB has updated to the Feb security patch and I'm still rocking the Dec '19 patch.
Same thing here as well. Got a T-865 XEF but I need DBT
The only effective method seems to use https://www.samkey.org/ through credits (for the TM-865 it asks for 6 credits (which for a single use it is better to buy on a site like ebay) then they send you login ( with the 6 credits) and if it allows, the change of CsC "THAT IS IN THE MULTIROM" is better before making sure with the Apk of Info SAM * INFO to see that CsC HAS the Rom installed, if the CsC of our choice is in The device, without problems, but if it is not available, it will not be possible unless before uploading the Rom + CsC to change.
After several attempts, and tutorials to change XEF / Fracia DBT / Germany, it seems the only method that works
It is necessary to respect the binary, to the case, the Hardware Asia, Europe, America, and not to put the Firmware of a container in another (it will not work) the ROMs of the Global version, EU in the EU and those of the USA in the USA and the from Asia to Asia
tool and "1 credit" even if I bought 6 as the official support page indicated to me when consulting about the SM-T865 LTE device
Original from France XEF it was impossible to change the Region Code for another of my interest DBT German because it is updated more frequently than the rest of the EU Global zone
PHE and XEF from Spain and France follow at the end of October 2020 with May patch while German DBT was updated twice in September 2020
The process turns out to be easier than usual
No need to even format the device in operation
Only with Phone * info you have to see the CSC available in the Rom available on the device and if the one of our choice DBT is already there in my case you can start
If the CSC is not present, it is when it will be necessary to Flashar before with a compatible Rom equal or higher in Binary and that contains the CSC to finally change
In Windows, which is where the SamKey software runs, you have to change the local language to US English unicode (it does not affect the local language of our pc
The code operation lasts only 4 or 5 minutes and as I say it does not erase anything from the device
Finally we have a CSC DBT / DBT / SIM1
The active CSC is the one that receives the HOTA from now on and from that moment receives update from Germany
Today it is the only reliable and efficient way

Categories

Resources