Related
Hello! Some day i want to downgrade my Marshmallow to Lollipop. I installed stock ROM to my Honor 5X but in older android - Lollipop 5.1. And I get bricked it. On start on screen i can see first-step logo honor after it i can see second-step honor's logo and here i wait 30 minutes and nothing 45 minutes and nothing. Worse is this I can't back to my stock Marshmallow, when I'm installing my previous ROM - MM i get the same brick on second-step logo. I installed a few more ROMs and nothing. My bootloader is unlocked but when i try to flash cust/system by fastboot appear an error. FAILED (remote: Command not allowed). I think i tried everything, thank for help me.
PS. Sorry for bad English :/
EDIT.1 I tried to use this method from Thread: http://forum.xda-developers.com/honor-5x/help/ive-bricked-honor-5x-t3324225. But the same problem at fastboot.
cust and system won't get flashed on 5X, try force updating it with an UPDATE.APP package for your device.
Put it inside dload folder in root of the Sdcard, and press all three buttons (Vol UP + Vol DOWN + Power) after switching off your phone, to start updating.
Sent from my PLK-L01 using Tapatalk
Thank you. But i tried to get ROM back by UPDATE.APP and when i want to go back to Marshmallow i get second-step honor logo and nothing after it. When i want to get Lollipop i have error "Software can't be installed" - something like that. I heard something about "Transition package" or "Downgrade Package" ? Maybe it can be work. But i can't find those packages for honor 5x KIW-L21.
Bayont said:
Thank you. But i tried to get ROM back by UPDATE.APP and when i want to go back to Marshmallow i get second-step honor logo and nothing after it. When i want to get Lollipop i have error "Software can't be installed" - something like that. I heard something about "Transition package" or "Downgrade Package" ? Maybe it can be work. But i can't find those packages for honor 5x KIW-L21.
Click to expand...
Click to collapse
If the Marshmallow update went through a bit, then you'll need transition package, so take on some pain to find it. It should be out there somewhere.
Sent from my PLK-L01 using Tapatalk
That's maybe becouse i don't remove ROOT and Xposed before installing ROM, how to unroot by TWRP?
Bayont said:
That's maybe becouse i don't remove ROOT and Xposed before installing ROM, how to unroot by TWRP?
Click to expand...
Click to collapse
If you use the this version of TWRP > https://www.androidfilehost.com/?fid=24588212152305793
you can flash system.img and cust.img extracted from your Update.APP with HuaweiUpdateExtractor
fastboot boot twrp.img
then copy the files to the phone
then choose Install / Install Image / system.img or cust.img or recovery.img boot.img ..you choose
Also just saying your have a L21 does not help
is it KIW-L21 C432 or KIW-L21 C185
Now i backed to B130 and i have loop with message Optimizing system... this process going to 100% and phone reboot. And it looping.
Bayont said:
Now i backed to B130 and i have loop with message Optimizing system... this process going to 100% and phone reboot. And it looping.
Click to expand...
Click to collapse
your post tells us nothing about what you did, are we suppose to guess ?
if you successfully flashed System.img - boot .img - cust.img and recovery.img you can now use the dload / Update.app
clsA said:
if you successfully flashed System.img - boot .img - cust.img and recovery.img you can now use the dload / Update.app
Click to expand...
Click to collapse
Done but without any effect, the same problem, stuck at second-step honor logo ;/
Any ideas?
Bayont said:
Any ideas?
Click to expand...
Click to collapse
Well considering I still don't know what you have done. Its hard to guess the next step
Sent from my SM-N920T using Tapatalk
Ok, one more time. When i'm installing any ROM B130 or B330, stock or official doesn't matter, the same problem. After installing rom by UPDATE.APP my phone booting and booting and booting and nothing. When i'm installing rom images by TWRP - boot, cust, system It's the same problem Booting, booting and nothing. When i tried to flash rom by fastboot i have error: FAILED (remote: Command not allowed). I would like to try this: http://forum.xda-developers.com/honor-5x/help/how-restore-cust-partition-t3356769 But i don't know how to access to adb shell: when i type "adb shell" in cmd where i have adb it say to me: error: device '(null)' not found. I don't know what to do more.
How much time honor 5x system is installing?
How i can check my honor is KIW-L21 C432 or KIW-L21 C185?
Bayont said:
How i can check my honor is KIW-L21 C432 or KIW-L21 C185?
Click to expand...
Click to collapse
If you tried to install the wrong Update.app the updater would get to 5% and stop and eventually just reboot. Did you actually watch the update go to 100% and reboot ?
I think i found source of my problem. When i want to downgrade my system was B340.
I read something about downgrade. Without Transition Package I can't downgrade my system I can install only the same (B340) or higher.
This making brick when i'm installing B330 or B140.
Now i'm trying to install OTA B340 and i have another problem,
when i have B330 and installing B340 by small OTA 124MB I have stuck on 5% of installing. It becouse:
EDIT 2 : If you come from B330, don't try to flash the small B340 update as local update has simply been disabled by theHuawei/Honor devs !
Worse, with B340 you won't be able to downgrade to any lower version : at least not easily... INFO FROM: HERE
Click to expand...
Click to collapse
But when i'm installing B130 by TWRP and upgrading to B340 by big upgrade (1,36GB) it's stucking on 0% and i get info: DO NOT UNPLUG....
I think that becouse my version isn't B130 only B140. I'm checking it by DC-UNLOCKER. Output from it:
Code:
Found Phone : KIW-L21
Model : Huawei phone in fastboot mode
Serial NR. : My Serial
Firmware : KIW-L21C432B140
FB LockState: LOCKED
widevine LockState: UNLOCKED
Bootloader Lock State: UNLOCKED
Root State: ROOT
Bootloader WidevineKey: WidevineKey_VALID
System State: Bootloader in UNLOCKED state
Bootloader Version: 001.001.000
Battery state: battery is present
Maybe I should Restore backup from diffrent KIW-L21 by TWRP?
Bayont said:
I think i found source of my problem. When i want to downgrade my system was B340.
I read something about downgrade. Without Transition Package I can't downgrade my system I can install only the same (B340) or higher.
This making brick when i'm installing B330 or B140.
Now i'm trying to install OTA B340 and i have another problem,
when i have B330 and installing B340 by small OTA 124MB I have stuck on 5% of installing. It becouse:
But when i'm installing B130 by TWRP and upgrading to B340 by big upgrade (1,36GB) it's stucking on 0% and i get info: DO NOT UNPLUG....
I think that becouse my version isn't B130 only B140. I'm checking it by DC-UNLOCKER. Output from it:
Code:
Found Phone : KIW-L21
Model : Huawei phone in fastboot mode
Serial NR. : My Serial
Firmware : KIW-L21C432B140
FB LockState: LOCKED
widevine LockState: UNLOCKED
Bootloader Lock State: UNLOCKED
Root State: ROOT
Bootloader WidevineKey: WidevineKey_VALID
System State: Bootloader in UNLOCKED state
Bootloader Version: 001.001.000
Battery state: battery is present
Maybe I should Restore backup from diffrent KIW-L21 by TWRP?
Click to expand...
Click to collapse
Normally restoring a TWRP backup is no different than flashing System.img and boot.img
your bootloop is firmware related ... you need the full B340 package
Yes, you written in Honor 5x Repo:
Waiting for full B340 to appear on Honor support site.
Click to expand...
Click to collapse
At the moment there isn't any full B340 ROM for download. And any OTA B340 doesn't work for me, yes? For example:
B140 -> B340
http://update.hicloud.com:8180/TDS/d...ull/update.zip
changelog
http://update.hicloud.com:8180/TDS/d.../changelog.xml
Click to expand...
Click to collapse
Bayont said:
Yes, you written in Honor 5x Repo:
At the moment there isn't any full B340 ROM for download. And any OTA B340 doesn't work for me, yes? For example:
Click to expand...
Click to collapse
Then you just have to wait
I don't publish the updates I just post them
Sent from my SM-N920T using Tapatalk
I can't back to Stock Lolipop by editing some files or install B340 from B140 by OTA
So I unlocked bootloader and FRP. Installed magis. It was working, but when i tried to install xposed, it went into a bootloop. Now I'm stuck at eRecovery screen with nothing working. I've done factory reset 10-15 times. Clicking 'Download latest version and recovery' is also not giving anything. Can go to fastboot mode. Went there, saw FRP was locked. Thinking I'll redo the process, I relocked the bootloader. But now the commands aren't working as neither 'allow oem unlock' nor 'usb debugging' is enabled. I can't enable them as phone won't boot up. Any solutions? Please help.
Model ANE-AL00
Arseon said:
So I unlocked bootloader and FRP. Installed magis. It was working, but when i tried to install xposed, it went into a bootloop. Now I'm stuck at eRecovery screen with nothing working. I've done factory reset 10-15 times. Clicking 'Download latest version and recovery' is also not giving anything. Can go to fastboot mode. Went there, saw FRP was locked. Thinking I'll redo the process, I relocked the bootloader. But now the commands aren't working as neither 'allow oem unlock' nor 'usb debugging' is enabled. I can't enable them as phone won't boot up. Any solutions? Please help.
Model ANE-AL00
Click to expand...
Click to collapse
Go to TWRP and restore your system backup.
kilroystyx said:
Go to TWRP and restore your system backup.
Click to expand...
Click to collapse
But I didn't install a custom recovery. So no TWRP
Arseon said:
But I didn't install a custom recovery. So no TWRP
Click to expand...
Click to collapse
So, then try flash same system partition via fastboot.
I tried flashing original firmware using DC-Pheonix. But phone is still in bootloop
What your build ?
If this phone with OREO or with NOUGAT / Android 8.x or 7.x ?
Possibly didn't work because the rom was of a different built. I've an ANE-AL00 8.0.0.131. Any solutions for this fix? Thanks.
Arseon said:
Possibly didn't work because the rom was of a different built. I've an ANE-AL00 8.0.0.131. Any solutions for this fix? Thanks.
Click to expand...
Click to collapse
You should try at least flash the system from fullota, the firrmware can be found with Firmware Finder for Huawei
http://pro-teammt.ru/firmware-database/?firmware_model=ANE-AL00C00B131&firmware_page=0
kilroystyx said:
You should try at least flash the system from fullota, the firrmware can be found with Firmware Finder for Huawei
http://pro-teammt.ru/firmware-database/?firmware_model=ANE-AL00C00B131&firmware_page=0
Click to expand...
Click to collapse
Yes. I flashed same file only. But not booting up. In DC, it says file writing complete when in fastboot mode. But in upgrade mode, it fails at 5/31 PACKAGE_TYPE.
I'm using update.app from update.zip. Is that what I should be using? Should I use the other zip files(cn, public etc.)? Please help.
Arseon said:
Yes. I flashed same file only. But not booting up. In DC, it says file writing complete when in fastboot mode. But in upgrade mode, it fails at 5/31 PACKAGE_TYPE.
I'm using update.app from update.zip. Is that what I should be using? Should I use the other zip files(cn, public etc.)? Please help.
Click to expand...
Click to collapse
It seems like you are doing well, but have you read the instructions carefully? They recommend when something fail.
https://www.dc-unlocker.com/huawei-phone-flashing-in-fastboot
@Arseon
you write "ANE-AL00 8.0.0.131" - this is not the "full" build : what's your Cxxx ?
on FirmwareFinder i see (example)ANE-AL00C00B133 ( C00 = Country '00'; B133 = Build Counter )
you need the correctly build from your phone !!!
you can boot to bootloader ?
your bootloader is unlockt ?
your FRP is unlock ?
you have download your build FULL-Update ?
you have with UpdateExtractor from Update.app (inside Update.zip)
- ramdisk.img
- recovery_ramdisk.img
- system.img
extracted ? The Extractor do automatic for all *.img a *.img.header.
you have copy this 6 files to your ADB-Folder ?
If this all "YES" then boot to bootloader and
- fastboot flash ramdisk ramdisk.img
- fastboot flash recovery_ramdisk recovery_ramdis.img
- fastboot flash system system.img
reboot phone, phone start to eRecovery and Low-Level format "data" and boot to system.
phone start as "new" phone (initial settings)
good : phone work
no good : all data is lost
AND very important : do not relock the bootloader !
ONLY if bootloader 'unlockt' you can self-repair !
JamesBott said:
@Arseon
you write "ANE-AL00 8.0.0.131" - this is not the "full" build : what's your Cxxx ?
on FirmwareFinder i see (example)ANE-AL00C00B133 ( C00 = Country '00'; B133 = Build Counter )
you need the correctly build from your phone !!!
Click to expand...
Click to collapse
Mine is ANE-AL00 8.0.0.131(C675). I used ANE-AL00C00B131 (http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2370/g1789/v138744/f1/full/filelist.xml ) to flash
JamesBott said:
you can boot to bootloader ?
your bootloader is unlockt ?
your FRP is unlock ?
Click to expand...
Click to collapse
Sadly no. Both bootloader and frp are locked.
JamesBott said:
you have download your build FULL-Update ?
you have with UpdateExtractor from Update.app (inside Update.zip)
- ramdisk.img
- recovery_ramdisk.img
- system.img
extracted ? The Extractor do automatic for all *.img a *.img.header.
you have copy this 6 files to your ADB-Folder ?
If this all "YES" then boot to bootloader and
- fastboot flash ramdisk ramdisk.img
- fastboot flash recovery_ramdisk recovery_ramdis.img
- fastboot flash system system.img
reboot phone, phone start to eRecovery and Low-Level format "data" and boot to system.
phone start as "new" phone (initial settings)
good : phone work
no good : all data is lost
Click to expand...
Click to collapse
Since bootloader and frp locked, adb commands are not working. Hence I'm using DCPheonix to flash the file. But without luck. It's still botting to eRecovery only
your phone is C675, you flash C00 : no correct
now is inside your phone a 'mix'
i think, you can no self-repair - sorry
@Arseon, my opinion your system partition is a mess due to xposed installation fail.
The solution for this case is restore system partition, it worked for me in the past.
In some cases we can get lucky install a clean system partition even if it is from other region code, because the main differences between regions are located in the other partitions
But what I learning is that system from C00 region don’t follow this standard because at least is missing google apps.
With DCPheonix did with get lucky and flash all files or just the first 4 and stop in the PACKAGE_TYPE?
same situation
I am in the same situation, can only boot to erecovery. I tried boot fastboot flash 4 files (because i have bootloader and frp unlocked) and dc-unlocker without luck. In both cases pass the flash but phone still not boot, only erecovery. I can get twrp works now following this guide: https://forum.xda-developers.com/hu...covery-twrp-3-2-1-0-p20-lite-edition-t3800692 but i dont have backups because i do a factory reset and the internal storage is empty. What can i do in twrp? I flash the correctly firmware for my phone ANE-LX3 8.0.0.104(C605), with this file ANE-LX3C605B130 (8.0.0.130) from here: http://pro-teammt.ru/firmware-database/?firmware_model=ANE-LX3&firmware_page=0 . Any other suggestion?
Edit: I can solve my problem. When I connect my phone in fastboot mode to dc-unlocker it give me an info:
Found Phone : ANE-LX3
Model : Huawei phone in fastboot mode
IMEI : 867903xxxxxxxxxxxx
Serial NR. : KPS7N18xxxxxxxxx
Firmware : ANE-LX3 8.0.0.104(C605
IMEI1:867903032092188
MEID:00000000000000
FB LockState: LOCKED
USER LockState: UNLOCKED
unlocked
Battery state: 3829mv
and with the firmware info I download that version exactly (ANE-LX3 8.0.0.104(C605, found on easy-firmware web page, paid), flash with dc-phoenix, and i got it, the device boots again. Hope it help to anyone, thks. This thing cost me 28 usd, too expensive for unroot a device lol
alvavaca said:
I am in the same situation, can only boot to erecovery. I tried boot fastboot flash 4 files (because i have bootloader and frp unlocked) and dc-unlocker without luck. In both cases pass the flash but phone still not boot, only erecovery. I can get twrp works now following this guide: https://forum.xda-developers.com/hu...covery-twrp-3-2-1-0-p20-lite-edition-t3800692 but i dont have backups because i do a factory reset and the internal storage is empty. What can i do in twrp? I flash the correctly firmware for my phone ANE-LX3 8.0.0.104(C605), with this file ANE-LX3C605B130 (8.0.0.130) from here: http://pro-teammt.ru/firmware-database/?firmware_model=ANE-LX3&firmware_page=0 . Any other suggestion?
Click to expand...
Click to collapse
This thread can help you a lot => HuRUpdater
kilroystyx said:
This thread can help you a lot => HuRUpdater
Click to expand...
Click to collapse
Thks for your help, I can solve my problem. When I connect my phone in fastboot mode to dc-unlocker it give me an info:
Found Phone : ANE-LX3
Model : Huawei phone in fastboot mode
IMEI : 867903xxxxxxxxxxxx
Serial NR. : KPS7N18xxxxxxxxx
Firmware : ANE-LX3 8.0.0.104(C605
IMEI1:867903032092188
MEID:00000000000000
FB LockState: LOCKED
USER LockState: UNLOCKED
unlocked
Battery state: 3829mv
and with the firmware info I download that version exactly (ANE-LX3 8.0.0.104(C605, found on easy-firmware web page, paid), flash with dc-phoenix, and i got it, the device boots again. Hope it help to anyone, thks. This thing cost me 28 usd, too expensive for unroot a device lol
---------- Post added at 02:08 PM ---------- Previous post was at 02:01 PM ----------
Arseon said:
I tried flashing original firmware using DC-Pheonix. But phone is still in bootloop
Click to expand...
Click to collapse
In pretty sure you are flashing the wrong firmware, try to push your version with dc-unlocker in fastboot and download the excatly matching firmware. Good luck
well, i have all of this+one more tougher stuff..
Well, I tried to install a custom ROM on my P20 Lite (ane-lx1) via TWRP aand when I failed I ended up into a bootloop, but the thing that got me a headache after a full day of forum research is that when I attempted to install the custom ROM the TWRP wanted a .img file, not a .zip file, so I rebooted after I alreday wiped out everything, I made a backup into the phone, BUT I cant access it because.. the TWRP freezes every time at the TeamWin logo.....the only thing that is accessible now its the fastboot&rescue mode and I'm out of juice and desperated...the bootloader is enabled...i think i preety much killed my phoen and my brain trying to get an android stock experience...i really have to get some sleep,well..thank you for your attention, if you have any suggestions that would pick me up from this mess I would be very greatfull, i'll see what i had left to do as soon as i'm able to...for now, have a good night/day/afternoon, whatever side of the world you're from
Edit:
I left the phone all night into bootloobing and after it got FULLY discharged, I dont know exactly how but the TWRP hasn't popped out, instead after this I was able to get into eRecovery and now it is downloading the 146(C432) version. I guess that I got lucky
Mate 10. So, I tried to install the latest EMUI version using HuRUpdater - bad idea. Now, my phone will not boot. I can enter EMUI Recovery Mode but when I try to receive download package, it says it can't be retrieved. I can also enter Fastboot Mode but the problem with that is that under Device Manager, it only gets recognized as, "Android Bootloader Interface."
Please, any help would be greatly appreciated.
edit: So, fastboot DOES work. What files from what version do I flash to return to stock recovery? I don't even know if Pie was actually written to the device or not before the device rebooted and wouldn't boot.
edit again: I have just successfully installed TWRP via fastboot but it hangs at startup screen - is this because it's not compatible with Pi?
So I've tried flashing ramdisk_recovery.img, kernel.img and system.img from the Pi version but I still can't factory reset the phone. It boots back to the white screen with the android dude and says, "Please update system again."
Any help would be appreciated...
Using Multi-Tool, it detects my device in Fastboot mode as still 8.0.0.143. So, I'm trying to flash System, Ramdisk, Cust, Recovery_Ramdisk and Userdata......all succeed, except one - Ramdisk.img. When I manually try to flash Ramdisk.img in command prompt, it also fails, "FAILED (remote: partition length get error)". In Multi-tool, the error is, "the size or path does not match the file system markup."
Please, does anyone have any other suggestions? I've been at this for nearly 12 hours straight.
I assume u have unlocked bootloader and frb unlocked too if both yes u can search in xda for zip file beta downy 0.4
It will help you to downgrade emui 9 to. Emui 8
If u have unlocked bootloader only I guess u need funky huawei to restore ur devise
I hope I did helped u
Thanks for the reply.
My bootloader is unlocked but how do I know if I have unlocked FRP?
And downy tool requires ADB but I can only access Fastboot.
edit: I just checked and my FRP is also unlocked. What now?
Tried Funky Huawei just now, no go. Still get package can't be received error in ERecovery after following all of the instructions. Have emailed them as that's what they suggest doing if it didn't work.
Not sure what else to try to be honest. How the hell does updating my phone from 8.0.0.143 to 9.0.0.159 with HuRUpdate brick my phone? Ffs.
essen212 said:
Tried Funky Huawei just now, no go. Still get package can't be received error in ERecovery after following all of the instructions. Have emailed them as that's what they suggest doing if it didn't work.
Not sure what else to try to be honest. How the hell does updating my phone from 8.0.0.143 to 9.0.0.159 with HuRUpdate brick my phone? Ffs.
Click to expand...
Click to collapse
Well, it happened because HuRUpdater it's not supported on EMUI 9.0.
Ramdisk fails to flash because even if in fastboot your device is showing as 8.0.0.143, it has EMUI 9's partition layout, so no more ramdisk partition.
Try flashing a firmware with the DLOAD method (search on androidhost.ru for a firmware designed for your device/cust).
Pretoriano80 said:
Well, it happened because HuRUpdater it's not supported on EMUI 9.0.
Ramdisk fails to flash because even if in fastboot your device is showing as 8.0.0.143, it has EMUI 9's partition layout, so no more ramdisk partition.
Try flashing a firmware with the DLOAD method (search on androidhost.ru for a firmware designed for your device/cust).
Click to expand...
Click to collapse
Damn. Well, that makes perfect sense. A question - do I flash the 9.0.0 version or 8.0.0.143 version?
essen212 said:
Damn. Well, that makes perfect sense. A question - do I flash the 9.0.0 version or 8.0.0.143 version?
Click to expand...
Click to collapse
Try with EMUI 9 first, then, if it fails, try Oreo. The most important part is finding a DLOAD firmware for your cust/region.
I've fixed it!
Funky emailed me back and I ended up using a different method on their site which worked like a charm. I couldn't recommend them enough.
Hi, good to hear you got it sorted! Would you mind sharing the details on what you had to do differently with FHC? I'm in the same boat here with a mate 10 pro that died on emui9 and I'm not sure if I should go the FHC way or not...
Thx - David
Was on stock ROM build 9.0.0.217(C636E2R1P12) before I unlocked bootloader to try out Magisk/ROOT. Things are mostly fine but Google Pay does not work as expected. Overall Magisk turns out not too useful for me, and I really need to use Google Pay. So I am trying to go back to the pre-unlocking condition.
After searching on XDA these are the things I tried but failed:
1. Fastboot flash system img - can flash stock ROM but bootloader remain unlocked and google pay won't work.
2. HWOTA - can patch update zips but update is no longer provided by the writer, tried another version of HWOTA update but did not work.
3. dload method - don't have microSD but tried a thumb drive with USB-C but "system install failed" in dload mode, not sure it's the USB or the update.app, in fact couldn't find a offline update.app with the correct region (C636) for this phone.
So currently still on firmware 9.0.0.217(C636E2R1P12) with unlocked bootloader and Magisk.
Please advise what other things I could try. Thank you!
[HELP] Mate 10 PRO stock return > What did am I missing ?
Hello,
Here is the summary
- Mate 10 PRO - BLA-L29 - 8.0.0.142(C432 EU model)
- Magisk Rooted
- Bootloader unlocked (via Huawei code)
- TWRP 3.2.1.0
I need to make my phone stock again, for that, I tried to make an OTA upgrade, but each time the phone reboot to apply the update, it ends to TWRP which is unable to deal with Huawei updates. I also tried with Huawei Hi Suite with same result.
I guess that I have to restore back the original recovery instead of TWRP, and this is where I'm facing some difficulties...
I've download this archive : Huawei Mate 10 Pro hw eu BLA-L29C 8.0.0.157(C432) Firmware 8.0.0 r1 EMUI8.0 05014VLL [androidhost.ru], put the 3 items (BLA-L09_hw_eu + BLA-L29_hw_eu + update_sd.zip) into the DLOAD folder placed in the root of my OTG USB key, but it ends to TWRP also.
Then I download this HuaweiUpdateExtractor_0.9.9.5 in order to extract the Huawei Recovery with no success :
- If I open the UPDATE.APP file, it ends up with a "RECOVERY_RAMDIS.img invalid image reader crc"
- If I open the "update_BLA-L29_hw_eu.app", no way to find the recovery file among thoses files : (look attached image)
Now, can anyone clearly explain me live I'm 5 how to proceed, or maybe provide me the original Huawei recovery image ???
Many thanks for help provided
solid.snake said:
[HELP] Mate 10 PRO stock return > What did am I missing ?
Hello,
Here is the summary
- Mate 10 PRO - BLA-L29 - 8.0.0.142(C432 EU model)
- Magisk Rooted
- Bootloader unlocked (via Huawei code)
- TWRP 3.2.1.0
I need to make my phone stock again, for that, I tried to make an OTA upgrade, but each time the phone reboot to apply the update, it ends to TWRP which is unable to deal with Huawei updates. I also tried with Huawei Hi Suite with same result.
I guess that I have to restore back the original recovery instead of TWRP, and this is where I'm facing some difficulties...
I've download this archive : Huawei Mate 10 Pro hw eu BLA-L29C 8.0.0.157(C432) Firmware 8.0.0 r1 EMUI8.0 05014VLL [androidhost.ru], put the 3 items (BLA-L09_hw_eu + BLA-L29_hw_eu + update_sd.zip) into the DLOAD folder placed in the root of my OTG USB key, but it ends to TWRP also.
Then I download this HuaweiUpdateExtractor_0.9.9.5 in order to extract the Huawei Recovery with no success :
- If I open the UPDATE.APP file, it ends up with a "RECOVERY_RAMDIS.img invalid image reader crc"
- If I open the "update_BLA-L29_hw_eu.app", no way to find the recovery file among thoses files : (look attached image)
Now, can anyone clearly explain me live I'm 5 how to proceed, or maybe provide me the original Huawei recovery image ???
Many thanks for help provided
Click to expand...
Click to collapse
In Huawei Extractor you need to disable the Header CRC check in options, then extracting will work just fine.
After extracting the recovery ramdisk image, flash it with :
fastboot flash recovery_ramdisk RECOVERY_RAMDIS.IMG
That will replace TWRP with the original recovery and the OTA should install just fine after that.
Pretoriano80 said:
In Huawei Extractor you need to disable the Header CRC check in options, then extracting will work just fine.
After extracting the recovery ramdisk image, flash it with :
fastboot flash recovery_ramdisk RECOVERY_RAMDIS.IMG
That will replace TWRP with the original recovery and the OTA should install just fine after that.
Click to expand...
Click to collapse
@Pretoriano80 :
You the man !!
This is exactly the missing part I needed, You've juste made my day, many thanks.
Info : If you plan to upgrade successively your phone through OTA, just ensure that you have a sim card inserted.