Hey guys,
I was wondering if these USB car chargers are compatible for the TP2?
http://cgi.ebay.com/Dual-2-Ports-US...Accessories?hash=item518f99b7a9#ht_3242wt_958
and
http://cgi.ebay.com/DC-Car-Cigarett...wItemQQptZPDA_Accessories?hash=item3a567814a2
and
http://cgi.ebay.com/Silver-Mini-Uni...Accessories?hash=item414bbc871c#ht_2000wt_958
I'm asking because I remember in the past I used a HTC charger to charge the O2 XDA Flame and it charged. However, the phone started acting VERY weird and freeze a lot. I ended up having to hard reset it
Thanks!
I think any USB charger for electronic gaget that has a output of 5.0 v should work. It does not matter if it is an AC charger or and car lighter charger. I got one of these AC and another car lighter charger. There are all 5.0 v output. I use them to charge Ipod and phones.
chompx2 said:
I think any USB charger for electronic gaget that has a output of 5.0 v should work. It does not matter if it is an AC charger or and car lighter charger. I got one of these AC and another car lighter charger. There are all 5.0 v output. I use them to charge Ipod and phones.
Click to expand...
Click to collapse
Thank you
It's best to choose one that can supply enough current (I think the wall charger supplies 2A, but 1A should be ok). Some devices will still trickle charge with a lower current, but others just won't trigger the charging circuits at all.
I had a cheap car charger that seemed to work ok most of the time, but it got worryingly hot after a while.
My TP2 came with an official HTC charger, so I use that now and it's great.
I have noticed that if the phone is OFF then 1A is not enough and usually stops charging but if the phone is ON it completes the charge..but takes for ever.
Has anyone experienced the charging overheat situation where the led flashes orange and green? I dont know if that is the situation but it only happens when I am charging in the car and the unit gets hot.
My old "OEM HTC" charger I got on ebay (the one with the blue HTC light) just stopped charging my phone after about 10-15 uses.
It lights on (charger), but my phone doesn't catch any charge lol
I got a 1A one, and unfortunately it cannot produce enough juice when running the GPS (copilot), after a while the phone shows a message telling the charge current is not enough.
The wall charger that came with the original box is 1A too, thus the problem might be with the cheap car charger.
Brando sells a 2A car adapter that should do the trick. They're out of stock right now, but it may be worth a look.
Hey!
Mine is a cheapo but does the trick. Charges the phone with satnav running, today went from 23% to full in less than 3 hours. Plus it's really tiny so I can keep my ashtray closed all the time. Using it with mini retractable cable, it all fits in the ashtray and it's handy to use.
http://cgi.ebay.co.uk/Micro-Nano-Ti...daptors_SM?hash=item5638c26773#ht_1747wt_1165
3waygeek said:
Brando sells a 2A car adapter that should do the trick. They're out of stock right now, but it may be worth a look.
Click to expand...
Click to collapse
The manual states that the output of the AC charger is 5.0 volts and 1 amp. That means the output of the DC/car charger should be the same. Using a 2 amp current might be charging the device faster but it would probably generate more heat and might shorten the battery life.
one tip, regardless of which charger you end up with, is to not leave the phone plugged in while starting the car. my understanding is that there can be be large voltage surges or fluctuations during the startup. depending on the design on the voltage converter inside the charger, some of that may be making it through to the phone.
i once had a AA NiCd battery smart charger that went wonky after using it in the car a lot, but that was with a straight-through 12V car to charger connector.
I made my own charger for using as a GPS on my motorcycles.
There is a charge select line in the plug. If the phone detects that it is connected to a USB port, the phone will not 'pull' more the 500ma. If that line is set to indicate a non USB port, then the phone will pull 1 amp. MAX (I never saw more then 900ma myself).
If you have the wrong charge plug, it may only charge at 500ma. If you have the correct plug and the charger can manage 5 amps, the phone will still only take 1 amp max.
For a while I used the phone in a waterproof box called an Aquabox. It would overheat during charging. I now only charge the phone when it is not in an enclosed hot space.
I'm still using the off-brand 'for Blackberry' car charger I got back when I had my Kaiser. Seems to be working just fine with this phone as well.
http://maxborgesagency.com/press/bracketron-launches-dual-usb-charger/
$24.99 dual USB Cigarette lighter adapter 1 & 2 amp
Reeves360 said:
http://maxborgesagency.com/press/bracketron-launches-dual-usb-charger/
$24.99 dual USB Cigarette lighter adapter 1 & 2 amp
Click to expand...
Click to collapse
Unfortunately, worthless.
Transformer needs 11v-15v to charge reasonably well. Any 5v charger, even at 1000000 amps, will not charge the TF with screen lit, or charge takes days with TF turned off.
Much harder to find auto chargers in the 11v-15v range, some that say 12v are actually not. I found one advertised as 12v (that measures 9.8v actually) and it also did not charge TF. Good luck.
Wont work. Unlike most devices the Transformer does not use 5v to charge like the iPhone and many other Android devices. It does use USB but it will only charge via Asus's special chargers. This is because our Transformers charge via 15volt and the charger cable is actually a USB 3.0 cable that has extra pins in back, and the 15volt pin is one of these extra pins the USB 3.0 layout provides.
Edit Bob Smith42 beat me to it by a few seconds lol
Be aware that it's incorrect to say that the TF won't charge from a standard USB charger. It does charge however it only trickle charges and therefore takes much longer. So let's make sure we are clear when we respond about what works and what doesn't. I used my iPad 2 amp charger on the TF and went from about 30% charge to about 85% charge in about 6 hours (screen off). The absolute fastest way to trickle charge from a generic adapter is with the TF powered off. Hopefully Asus will come out their own car adapter for the TF.
The charger that the original poster mentioned WILL trickle charge the TF. Also new TF users should know that the TF will not give any charging indications when plugged into anything other than the Asus charger - but it is trickle charging none-the-less.
w4rmk said:
The charger that the original poster mentioned WILL trickle charge the TF. Also new TF users should know that the TF will not give any charging indications when plugged into anything other than the Asus charger - but it is trickle charging none-the-less.
Click to expand...
Click to collapse
One thing to mention that you can do if you have the tock is trickl-echarge THAT while still using the pad... then in 5-6 hours when the padd is getting low, you can dock it, and it will charge off of the dock while you keep using it. Once fully charged, undock it again, etc. This is what I want to do, and why I want a second USB cable.
Hi,
I bought a quick circle case to go with my f400k. The case came directly from Korea and the pins look like they match up.
I am trying to charge with this cheap charger:
http://www.ebay.com.au/itm/28136049...eName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
The charger has a blue light which switches on when I place the G3 on it but the G3 doesn't charge.
Does this sound like a fault with the case / charger or phone? I am running Sphinx 1.0 if software can make a difference.
I don't have any other QI devices or charges so can't really test.
Thanks
Are you plugging it into a USB port or a wall charger? I had one really cheap qi charger that wouldn't charge very well in a USB hub, if at all. But works ok(not great) when plugged in wall.
I have tried both. Out of interest did your cheap charger have a LED and if so did it only come on when the phone was actually charging?
No it has a light on all the time, and changes when charging.
I've just upgraded my unrooted LG G Pro 2(D838) to lollipop. Charging through my car usb adapter is now very slow since I updated. I have tried two chargers, both of which were charging at the full rate before, one of which is a genuine samsung charger - they both have over 2A output. The phone does recognise the charger as an AC charging source, but currently isn't charging above about 200mA.
I am using a Samsung AC charger at home which works as normal. I've had a bit of a look online and people are experiencing the same issue with the LG and other lollipop devices. One of the suggestions was to short the data pins on the usb cable, which I have done but this doesn't seem to have fixed the issue. If the phone is off it charges at the faster rate.
What I can't work out is why the charging speed is different between the samsung AC adapter and the car charger, when it detects both as an AC source? Is there some communication between the two, or are there any car chargers that will provide high speed charging that will work?
any suggestions are appreciated!
Hello friends. Let me ask, I see in yota3's accessory box there is a fast charger. Some sites also say yota3 has a fast charging mode. But I found the charger's charging speed to be normal. and wireless charger more..... do you know about that.
I was able to charge mine at 9v/1.3a with the included adapter. I have a usb amp meter, and noticed that I had to get the usb tight with the phone to get 9v mode.
I can't find or figure out if my Yota 3+ supports qi wireless charging. One specs website said yes, but I cannot find the 'sweet spot' on the front or back screen.