Related
This Is How Too Convert your US model SM-G973U S10 Into Hong Kong Model SM-G9730 S10
Bootloader Must Be Unlocked Too Do This!!Downloads
USERDATA_SLOT_G973W_AIO_TWRP_VBMETA_ANDROID_R.tar.md5
Odin3_v3.14.1_3B_PatcheD.zip
1. Download TGY firmware for the SM-G9730 model phone
2, Also Have US firmware downloaded for the SM-G973U
3. Reboot to TWRP or Stock Recovery and wipe data then reboot too download/bootloader mode
4. Load the BL and CP files in odin from the SM-G973U firmware In matching slots in odin
5. Load the AP and Home_CSC files from the SM-G9730 firmware in matching slots in odin
6. Load my USERDATA_SLOT_G973W_AIO_TWRP_VBMETA_ANDROID_R.tar.md5 In UserData slot in odin
7. Flash the above firmware in Odin.
8. Phone will reboot too TWRP and install root and necessary files then boot too setup
This Is How Too Convert your US Model SM-G973U S10 Into Canadian Model SM-G973W S10
Bootloader Must Be Unlocked Too Do This!!Downloads
USERDATA_SLOT_G973W_AIO_TWRP_VBMETA_ANDROID_R.tar.md5
Odin3_v3.14.1_3B_PatcheD.zip
1. Download Canadian firmware for the SM-G973W model phone
2. Reboot to TWRP or Stock Recovery and wipe data then reboot too download/bootloader mode
3. Extract the BEYOND1QLTE_CAN_SINGLE.pit from the CSC_OMC_OYN****.tar.md5 file
4. Load the BL,AP,CP and CSC_OMC_OYN****.tar.md5 files in matching slots in odin
5. Load my USERDATA_SLOT_G973W_AIO_TWRP_VBMETA_ANDROID_R.tar.md5 In UserData slot in odin
6, In odin choose the pit tab and load the BEYOND1QLTE_CAN_SINGLE.pit you extracted above
7. Flash the above firmware in Odin.
8. Phone will reboot too TWRP and install root and necessary files then boot too setup
This Is How Too Convert your Canadian Model SM-G973W S10 Into US Model SM-G973U/U1 S10
Bootloader Must Be Unlocked Too Do This!!
Downloads
USERDATA_SLOT_G973U_AIO_TWRP_VBMETA_ANDROID_R.tar.md5
Odin3_v3.14.1_3B_PatcheD.zip
1. Download US firmware for the SM-G973U/U1 model phone
2. Reboot to TWRP or Stock Recovery and wipe data then reboot too download/bootloader mode
3. Extract the BEYOND1QLTE_USA_SINGLE.pitfrom the CSC_OMC_OYN****.tar.md5 file
4. Load the BL,AP,CP and CSC_OMC_OYN****.tar.md5 files in matching slots in odin
5. Load my USERDATA_SLOT_G973U_AIO_TWRP_VBMETA_ANDROID_R.tar.md5 In UserData slot in odin
6, In odin choose the pit tab and load the BEYOND1QLTE_CAN_SINGLE.pit you extracted above
7. Flash the above firmware in Odin.
8. Phone will reboot too TWRP and install root and necessary files then boot too setup
This Is How Too Convert your Hong Kong Model SM-G9730 S10 Into US Model SM-G973U/U1 S10
Bootloader Must Be Unlocked Too Do This!! Downloads
G9730ZHU4EUA8_G9730TGY4EUA8_USA.7z
USERDATA_SLOT_G973U_AIO_TWRP_VBMETA_ANDROID_R.tar.md5
Odin3_v3.14.1_3B_PatcheD.zip
Directions
This has not been tested as I do not have the SM-G9730 model phone so let me know
1, Extract G9730ZHU4EUA8_G9730TGY4EUA8_USA.7z
2. Reboot phone too TWRP or stock recovery and wipe data then reboot too download/bootloader
3. Load files in appropriate slots in odin along with USERDATA_SLOT_G973U_AIO_TWRP_VBMETA_ANDROID_R.tar.md5
In UserData slot and flash with odin.
4. Phone will reboot too twrp and process files will reboot back to TWRP once during install then will boot too setup
5, After setup phone may tell you to reboot too install new sim.
jrkruse said:
This Is How Too Convert your US model SM-G973U S10 Into Hong Kong Model SM-G9730 S10
Bootloader Must Be Unlocked Too Do This!!Downloads
USERDATA_SLOT_G973W_AIO_TWRP_VBMETA_ANDROID_R.tar.md5
Odin3_v3.14.1_3B_PatcheD.zip
1. Download TGY firmware for the SM-G9730 model phone
2, Also Have US firmware downloaded for the SM-G973U
3. Reboot to TWRP or Stock Recovery and wipe data then reboot too download/bootloader mode
4. Load the BL and CP files in odin from the SM-G973U firmware In matching slots in odin
5. Load the AP and Home_CSC files from the SM-G9730 firmware in matching slots in odin
6. Load my USERDATA_SLOT_G973W_AIO_TWRP_VBMETA_ANDROID_R.tar.md5 In UserData slot in odin
7. Flash the above firmware in Odin.
8. Phone will reboot too TWRP and install root and necessary files then boot too setup
Click to expand...
Click to collapse
I could not do it from G973U1 to G9730 the cell phone does not allow it
alexmen123 said:
I could not do it from G973U1 to G9730 the cell phone does not allow it
Click to expand...
Click to collapse
what firmware did you try it has to be tgy
Simply a silly question from me: Can we actually unlock the bootloader of the USA Galaxy S10?
From all I know is we can only unlock bootloader for the Exynos Version. Thanks and Huge love if you guys can show me the link or anything else to make my USA S10 free.
Thank you!
robocopvn said:
Simply a silly question from me: Can we actually unlock the bootloader of the USA Galaxy S10?
From all I know is we can only unlock bootloader for the Exynos Version. Thanks and Huge love if you guys can show me the link or anything else to make my USA S10 free.
Thank you!
Click to expand...
Click to collapse
Post 2 has info
[SM_G973U/U1/W_Snapdragon]-[Upgrade Easily Android 11 To 12 Using Odin]-[Automatically Root Remove Forceencrypt Patch Bluetooth And Fix Safetynet]
Must Have An Unlocked Bootloader To Do This! This An odin tar file I have created to flash along with stock odin firmware to automatically install TWRP recovery along with Disable VBMETA image. The tar file will also automatically install magisk...
forum.xda-developers.com
alexmen123 said:
I could not do it from G973U1 to G9730 the cell phone does not allow it
Click to expand...
Click to collapse
also were you trying this with a phone with unlocked bootloader? The bootloader on your SM-G973U1 must be unlocked
jrkruse said:
Were you also trying this with an unlocked bootloader phone? The bootloader of your SM-G973U1 must be unlocked
Click to expand...
Click to collapse
si esta desbloqueado. ¿Qué puedo hacer?
si Pongo firmware tyg en mi g973u1 . Activará segunda sim?
Translation:
if it is unlocked. What I can do?
if I put tyg firmware on my g973u1. Will it activate second sim?
[QUOTE = "jrkruse, publicación: 84541509, miembro: 1949695"]
¿Qué firmware probaste? Tiene que ser tgy
[/CITA]
really my interest is to convert my G973U1 into a dual SIM terminal. Is this possible by switching to the tgy firmware?
alexmen123 said:
[QUOTE = "jrkruse, publicación: 84541509, miembro: 1949695"]
¿Qué firmware probaste? Tiene que ser tgy
[/CITA]
really my interest is to convert my G973U1 into a dual SIM terminal. Is this possible by switching to the tgy firmware?
Click to expand...
Click to collapse
you cannot convert the US phones to dual sim because they dont have 2 seperate imei numbers
I mean they do but one is tied directly to the esim not a physical sim
jrkruse said:
This Is How Too Convert your US Model SM-G973U S10 Into Canadian Model SM-G973W S10
Bootloader Must Be Unlocked Too Do This!!Downloads
USERDATA_SLOT_G973W_AIO_TWRP_VBMETA_ANDROID_R.tar.md5
Odin3_v3.14.1_3B_PatcheD.zip
1. Download Canadian firmware for the SM-G973W model phone
2. Reboot to TWRP or Stock Recovery and wipe data then reboot too download/bootloader mode
3. Extract the BEYOND1QLTE_CAN_SINGLE.pit from the CSC_OMC_OYN****.tar.md5 file
4. Load the BL,AP,CP and CSC_OMC_OYN****.tar.md5 files in matching slots in odin
5. Load my USERDATA_SLOT_G973W_AIO_TWRP_VBMETA_ANDROID_R.tar.md5 In UserData slot in odin
6, In odin choose the pit tab and load the BEYOND1QLTE_CAN_SINGLE.pit you extracted above
7. Flash the above firmware in Odin.
8. Phone will reboot too TWRP and install root and necessary files then boot too setup
Click to expand...
Click to collapse
Hi, where can I find the file BEYOND1QLTE_CAN_SINGLE.pit. Looking forward to your help. Thanks a lot
Tuan Anh1 said:
Hi, where can I find the file BEYOND1QLTE_CAN_SINGLE.pit. Looking forward to your help. Thanks a lot
Click to expand...
Click to collapse
Read direction number 3
jrkruse said:
Đọc hướng số 3
Click to expand...
Click to collapse
thanks can i ask is there any way to fix the startup warning
Must Have An Unlocked Bootloader To Do This!
This A full stock firmware file I have created to flash with odin to automatically install TWRP recovery along with Disable VBMETA image. The Userdata _AIO tar file will also automatically install magislk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet. No flashing of zips is required
Info For Bootloader Unlocks Can Be Found In Post 2
I Do Not Recommend Mixing Bit 1 And Bit 2 Firmware!!!!
Downloads
SM-G981U/U1/W- Model
G981USQU3HWB3_Bit1_Safe --This will bring you to Android 13 without loosing unlock
SM-G986U/U1/W- Model
G986USQU3HWB3_Bit1_Safe --This will bring you to Android 13 without loosing unlock
SM-G988U/U1/W- Model
G988USQU3HWB3_Bit1_Safe --This will bring you to Android 13 without loosing unlock
Odin3_v3.14.1_3B_PatcheD.zip
TWRP Recovery Provide by @afaneh92
Be prepared to have your data wiped. The process tries to determine if you do or do not need to have data wipe but as a precaution just assume your data will be wiped. Especially if using U1 or W firmware
Install Instructions
You must be OEM Unlocked Bootloader
1. On Initial unlock of phone you must through setup and be signed into your google account.
2. Reboot phone too download mode and make sure KG STATUS=CHECKING (see pic) and not PRENORMAL. If PRENORMAL then do step 1 again
View attachment 5217631
3. Use patched 3.14 odin and load files in appropriate odin slots
4. Phone will reboot to TWRP and remove encryption which will wipe phone. Phone will reboot back too TWRP to finish install then reboot to setup
Features
No patches or mod zips are needed phone will already be rooted
Fix Safetynet
Bluetooth is patched for pairing to survive reboots
Samsung Health working
Bugs
Samsung Pay, Secure Folder and Samsung Pass do not work as on most Samsung Rooted Roms
Thanks To People That Make My Life Easier
elliwigy
klabit87
Krog18
me2151
stang5litre
Raymonf for modified odin
rayan-refoua for boot animation
TheMadScientist
afaneh92
kdrag0n for safetynet fix
3arthur6 for bluetooth patch zip
JDBarlow for test S20 stuff
markfm For Bitsafe Firmware
Source For Userdata AIO
Info For U Model Bootloader Unlocking Can Be Found
[Android][UNSAMLOCK] Bootloader Unlock for Samsung US/Canada Devices
This thread is @svetius approved Important notice: Do not update to April 2023 security update (XXXXXXXXXXWCX) or later. Examples: G998USQS6EWCA, N986USQU4HWD1. Samsung has patched the bootloader unlock again on those updates. NOTE: The OneUI...
forum.xda-developers.com
Below US snapdragon devices can be bootloader unlocked with above service as long as bootloader version meets below criteria. Bootloader version can be determined from the 5th character from the right on the baseband version or build number, in some cases from kernel version
Z Fold2 5G BL V1
Fold 5G BL V1-4
Fold BL V1-4
Z Flip 5G BL V1
Z Flip BL V1-3
Note series 20 BL V1
S20 series BL V1
S20 FE 5G BL V1-2
Note 10 series BL V1-5
S10 Lite BL V1-3
Note 10+ 5G N976U BL V1-4
Note 10+ 5G N976V BL V1-5
S10 5G BL V1-5
S10 series BL V1-4
Note 9 BL V1-7
S9 series BL V1-9
Tab S6 BL V1-3
Tab S7 BL V1
Tab S7+ BL V1
A71 5G BL V1-2
A51 BL V1-5
A51 5G BL V1-4
A50 A505W BL V1-A
A50 A505U BL V1-B
S21 BL V1
A32 5G BL V1-3
Tab Active Pro 10.1 BL V1-4
XCover Pro BL V1-7
Good to see you here, I will make use of this. Thanks, I hope to see you playing with roms!
jhr5474 said:
Good to see you here, I will make use of this. Thanks, I hope to see you playing with roms!
Click to expand...
Click to collapse
I dont have s20 so Im limited what I can make
If tokens can be updated to flash higher bootloaders then I will adjust files accordingly
This works great! I flashed the entire U1 DUB7 update with the force wipe with BL files in the USERDATA slot. Everything went well.
Tried this on my G981V and failed on (auth). Was worth the try although I soft bricked my phone lol
scepz said:
Tried this on my G981V and failed on (auth). Was worth the try although I soft bricked my phone lol
Click to expand...
Click to collapse
So please give more info. What file you tried flash. You should be able to flash the ones that don’t have bootloaders in them
jrkruse said:
So please give more info. What file you tried flash. You should be able to flash the ones that don’t have bootloaders in them
Click to expand...
Click to collapse
Both files that say contain bootloader from UI 3.0 and that I'll keep my unlock token. kg status was checking as well.
scepz said:
Both files that say contain bootloader from UI 3.0 and that I'll keep my unlock token. kg status was checking as well.
Click to expand...
Click to collapse
Sorry I had no clue there was an sm-g981v mode. Just don’t flash the bl file of your stock firmware and you will be fine using my userdata without bl files
jrkruse said:
Sorry I had no clue there was an sm-g981v mode. Just don’t flash the bl file of your stock firmware and you will be fine using my userdata without bl files
Click to expand...
Click to collapse
I tried with just your user data file still didn't work. So your saying next time use all files besides BL?
scepz said:
I tried with just your user data file still didn't work. So your saying next time use all files besides BL?
Click to expand...
Click to collapse
I'll make a specific one for sm-g981v
jrkruse said:
I'll make a specific one for sm-g981v
Click to expand...
Click to collapse
Ok
scepz said:
Ok
Click to expand...
Click to collapse
files in the OP
jrkruse said:
Must Have An Unlocked Bootloader To Do This!
This An odin tar file I have created to flash along with stock odin firmware to automatically install TWRP recovery along with Disable VBMETA image. The tar file will also automatically install magislk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet. No flashing of zips is required
Info For Bootloader Unlocks Can Be Found In Post 2
Downloads
SM-G981U/U1/W- Model
These contains bootloaders from One UI 3.0 firmware so you will not loose token and do not need to alter firmware you are flashing
They contain bootloaders too allow you too load full stock One UI 3.1 firmware in odin without having to worry about removing certain files as the bootloaders in the USERDATA file will keep you on the correct bootloaders.
USERDATA_AIO_G981_FORCE_WIPE.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G981_NO_WIPE.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
These do not contains bootloaders from One UI 3.0 firmware and you will loose token if you flash higher version bootloaders unless you alter the firmware. You can use these to do the firmware as you see fit.
USERDATA_AIO_G981_FORCE_WIPE_NO_BL.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G981_NO_WIPE_NO_BL.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
SM-G981V- Model
These contains bootloaders from One UI 3.0 firmware so you will not loose token and do not need to alter firmware you are flashing
They contain bootloaders too allow you too load full stock One UI 3.1 firmware in odin without having to worry about removing certain files as the bootloaders in the USERDATA file will keep you on the correct bootloaders.
USERDATA_AIO_G981V_FORCE_WIPE.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G981V_NO_WIPE.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
These do not contains bootloaders from One UI 3.0 firmware and you will loose token if you flash higher version bootloaders unless you alter the firmware. You can use these to do the firmware as you see fit.
USERDATA_AIO_G981V_FORCE_WIPE_NO_BL.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G981V_NO_WIPE_NO_BL.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
SM-G986U/U1/W- Model
These contains bootloaders from One UI 3.0 firmware so you will not loose token and do not need to alter firmware you are flashing
They contain bootloaders too allow you too load full stock One UI 3.1 firmware in odin without having to worry about removing certain files as the bootloaders in the USERDATA file will keep you on the correct bootloaders.
USERDATA_AIO_G986_FORCE_WIPE.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G986_NO_WIPE.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
These do not contains bootloaders from One UI 3.0 firmware and you will loose token if you flash higher version bootloaders unless you alter the firmware. You can use these to do the firmware as you see fit.
USERDATA_AIO_G986_FORCE_WIPE_NO_BL.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G986_NO_WIPE_NO_BL.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
SM-G988U/U1/W- Model
These contains bootloaders from One UI 3.0 firmware so you will not loose token and do not need to alter firmware you are flashing
They contain bootloaders too allow you too load full stock One UI 3.1 firmware in odin without having to worry about removing certain files as the bootloaders in the USERDATA file will keep you on the correct bootloaders.
USERDATA_AIO_G988_FORCE_WIPE.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G988_NO_WIPE.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
These do not contains bootloaders from One UI 3.0 firmware and you will loose token if you flash higher version bootloaders unless you alter the firmware. You can use these to do the firmware as you see fit.
USERDATA_AIO_G988_FORCE_WIPE_NO_BL.tar.md5
This will force a wipe of data no mater what. This Must Be Used On U1 Firmware and can be used on U firmware if you choose so.
USERDATA_AIO_G988_NO_WIPE_NO_BL.tar.md5
This will only wipe if you have encrypted data. This Can Only Be Used On U firmware
Odin3_v3.14.1_3B_PatcheD.zip
TWRP Recovery Provide by @afaneh92
Be prepared to have your data wiped. The process tries to determine if you do or do not need to have data wipe but as a precaution just assume your data will be wiped. Especially if using U1 or W firmware
Install Instructions For Newly Unlocked Devices
You must be OEM Unlocked Bootloader
1. On Initial unlock of phone you must through setup and be signed into your google account.
2. Reboot phone too download mode and make sure KG STATUS=CHECKING (see pic) and not PRENORMAL. If PRENORMAL then do step 1 again
View attachment 5217631
3. Use patched 3.14 odin and load file USERDATA_SLOT_G98*U_**.tar.md5 you must choose one of the FORCE_WIPE files and load in the USERSDATA slot of odin and flash file
4. Phone will reboot to TWRP and remove encryption which will wipe phone. Phone will reboot back too TWRP to finish install then reboot to setup
Install Instructions For Updating Firmware On Phone Already Unlocked
1. Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above
2. Use patched 3.14 odin and load stock firmware in appropriate slots use regular CSC file in the CSC slot and load file one of the USERDATA_SLOT_G98*U_**.tar.md5 in the USERSDATA slot of odin and flash firmware. Do not use the User Data file that comes with firmware.
3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not
Install Instructions If Updating Images With TWRP
1. When done flashing images in TWRP Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above.
2. Use patched 3.14 odin and load file USERDATA_AIO_G98*_NO_WIPE_NO_BL.tar.md5 in the USERSDATA slot of odin and flash file.
3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not.
4. Alternatively to using USERDATA_AIO_G98*_NO_WIPE_NO_BL.tar.md5 in odin you can use AIO_Magisk_22_S20_Series.zip found in post 2
Features
No patches or mod zips are needed phone will already be rooted
Fix Safetynet
Bluetooth is patched for pairing to survive reboots
Samsung Health working
Bugs
Samsung Pay, Secure Folder and Samsung Pass do not work as on most Samsung Rooted Roms
Thanks To People That Make My Life Easier
@elliwigy
@klabit87
@Krog18
@me2151
@stang5litre
@Raymonf for modified odin
@rayan-refoua for boot animation
@TheMadScientist
@afaneh92
@kdrag0n for safetynet fix
3arthur6 for bluetooth patch zip
@JDBarlow for test S20 stuff
Click to expand...
Click to collapse
Does this work on s20 plus g9860?
If not...can you make a file for SM-G9860 TGY.
This is the link for latest firmware
Download Samsung Galaxy S20+ SM-G9860 TGY Hong Kong firmware
All Samsung firmwares for Galaxy S20+ in Hong Kong with model code SM-G9860. We offer free and fast download options. Check them out now.
www.sammobile.com
Gianni's said:
Does this work on s20 plus g9860?
If not...can you make a file for SM-G9860 TGY.
This is the link for latest firmware
Download Samsung Galaxy S20+ SM-G9860 TGY Hong Kong firmware
All Samsung firmwares for Galaxy S20+ in Hong Kong with model code SM-G9860. We offer free and fast download options. Check them out now.
www.sammobile.com
Click to expand...
Click to collapse
The ones without bootloaders will work. The NO_BL ones. Probably have to use the force wipe one
So, if I have the S20+ (US Cellular) and want to try the 3.1 firmware:
1.) Download the firmware
2.) Put your file for it into user data field in Odin
3.) Put in AP, CSC (home or whatever to not overwrite my USC one I think) and the rest EXCEPT for the bootloader into Odin
4.) Flash as usual and then everything should work. I'll keep my unlock and be able to use the 3.1 firmware?
rlewis312010 said:
So, if I have the S20+ (US Cellular) and want to try the 3.1 firmware:
1.) Download the firmware
2.) Put your file for it into user data field in Odin
3.) Put in AP, CSC (home or whatever to not overwrite my USC one I think) and the rest EXCEPT for the bootloader into Odin
4.) Flash as usual and then everything should work. I'll keep my unlock and be able to use the 3.1 firmware?
Click to expand...
Click to collapse
I did it that way, used the BL included file and flashed all the stock files, after the full wipe everything that I needed was included. Worked great, on UI 3.1 rn
It worked for me also, thanks for making this.
hi jrkruse i just got an A71 5g unlocked (thanks afaneh92), and i was wondering if you could make an aio userdata file for it? so i can flash ui 3.1 firmware to it? like this for my s20 ultra..(this thread)
Hi, I have a problem while trying to flash root on my SM-T870(Samsung Tab S7).
I tried to flash the stock AP file with Odin but it didn't fix it. I think the issue was, that I didn't unlock the OEM bootloader.
Any way that I can fix
EDIT: I fixed it
Hello
I think you need to flash all three of AP, BL, & CSC files together in ODIN.
I wanted to root my A52 5G (SM-A526B) i first unlocked the bootloader
then i downloaded my Firmware with Frija and patched the boot.img with Magisk then i went into download mode and flashed it with Odin
Odin gave me a Green PASS Message and i knew i needed to factory reset with recovery mode but i couldnt get into it then i got into a boot loop with the Samsung Galaxy Bootlogo
then i tried to flash Twrp with odin to factory reset because i couldnt get into the stock recovery mode Odin again gave me a PASS Message then i tried to get into recovery mode but it still didnt work and now im trying to flash Stock Firmware but cant get it to work what should i do
The picture is what happens when i try to boot please help me to flash stock firmware
When i try to flash Stock Firmware it fails at the very end on vbmeta.img
The a52 5g doesn't have twrp currently. Also, you might have flashed the incorrect firmware.
Plus, just for you to know, you do not need to do factory reset after flashing your firmware. What steps have you taken to flash this firmware? How did you patch magisk? Show the steps so we can help you cuz you might have done something wrong
Ok it seems that your mistake here is that you are trying to flash boot.img. so what you actually suppose to do is to download the firmware, take the AP file from the firmware(don't extract the file!). Then, move the file to your phone and download magisk on your phone. You will see that magisk is offering you to install magisk on the top corner of your screen. You need to choose to patch the file, the AP file. Once magisk done, on your file explorer(probably in downloads) a file called "magisk_patched xxxx.tar" (the xxxx representing the version of magisk). Take this file and copy it to your computer, and on Odin, instead of using the AP file, use the magisk file. Boom, done. Now first, we need to recover your phone to its original condition. Take the AP file and flash it(not the boot.img!)
DownBaddie said:
When i try to flash Stock Firmware it fails at the very end on vbmeta.img
Click to expand...
Click to collapse
Try flashing other parts of firmware, not just AP
i.e. BL, CSC and CP
But don't add home_csc (USERDATA).
If all fails, you can use EDL mode to flash firmware
How To Flash Qualcomm MBN Firmware Via QPST tool
If your device is based on Qualcomm’s CPU and you’re searching for an easy way to flash the device’s stock ROM, here ends your search. You just need the QPST tool and the instructions here to guide you. Follow the instructions below to get you started. Prerequisites: Qualcomm QPST tool –...
www.leakite.com
As I flashed HK firmware I can't receive ota updates. So I can only update my phone through flashing firmware. How to flash new firmware without clearing data and also I rooted my IV, can I not flash bootloader or I should flash bootloader and reroot it?
Just extract the boot image of the new firmware you want to flash and patch it with magisk, flash the firmware preserving userdata, and then flash the patched boot.img to get root back.
EDIT: Make sure to run newflasher set_active:a before flashing or else you will get a boot loop. No idea why.
mufunyo said:
Just extract the boot image of the new firmware you want to flash and patch it with magisk, flash the firmware preserving userdata, and then flash the patched boot.img to get root back.
EDIT: Make sure to run newflasher set_active:a before flashing or else you will get a boot loop. No idea why.
Click to expand...
Click to collapse
I found someone say that remove userdata.sin in firmware before flashing so I can preserve my data. Is that true?
wednesyao said:
I found someone say that remove userdata.sin in firmware before flashing so I can preserve my data. Is that true?
Click to expand...
Click to collapse
Newflasher will prompt you if you want to preserve data. If you don't trust that you can look into update.xml and delete all the files marked NOERASE (delete from the firmware folder, not from the xml file).
mufunyo said:
Newflasher will prompt you if you want to preserve data. If you don't trust that you can look into update.xml and delete all the files marked NOERASE (delete from the firmware folder, not from the xml file).
Click to expand...
Click to collapse
That's cool, I'll try it later. Thanks a lot XD.