hello everyone.
I wanted to root android 4.2.2 / Panasonic eluga p p-03e
But I couldn't get into the bootloader, even using adb reboot bootloader.
Even when entering recovery mode using a physical button, there were only two modes: reboot and factory reset.
I tried various rooting tools, but all did not work, and lastly, only magisk using twrp is left. I wish I could run this.
If anyone has run any valid methods for this, or knows of a valid rooting tool, please help me.
thank you.
Related
Ok! so I have been trying very hard to port a custom recovery for my Micromax canvas xpress 2 E313(newer model) with the MT6592 chip. I followed several guides and tried flashing the recovey but they don't open. I see a black screen when trying to open recovery and the device reboots itself after 10 secs. Can someone help me figure out the problem? Actually now I am working on unlocking the bootloader of the device and then flashing the recovery ! MTK droid tools is also not able to detect my device no matter how many correct drivers I install ! Feeling really bad ! Hope someone replies fast ! I can even upload the recovery file as well as any other file if you want! Please help!There is also one more problem, when I enter the fastboot mode, the adb is not able to detect my device therefore not letting me give commands ! ANY SOLUTIONS?
I have just purchased infinix zero 3 (April 2017). Trying to root device initially via apks and pc software like
1. King root
2. Iroot
3. KingoRoot
4. Framaroot
5. Root genius etc.
Then found some articles telling TWRP method to root device, then i tried to install TWRP (recovery.img) [MT6795] in my infinix zero 3.
while flashing via sp_flash tool it shows successfully installed but when I tried to start my phone with keys combination Vol down + Power button it again shows old "Factory Mode" menu.
I spent nearly 6-7 hours on rooting the device but failed
looking forward to get help from here.
This also happened with me did u find a solution!
There's a little fuss regarding the Mediatek devices meaning that they are absoloute **** regarding both development and Specs along with performance.Remembet do not buy them.They are not meant to be messed with.Currently your issue is that you can't boot to recovery.Instead it goes to factory mode.First try fastboot to boot into recovery manually.Or ADB to boot into it.And Remember it good.After you flash the .img file if you don't boot into the recovery straight after flashing,The already present img won't be overwritten meaning that flash and reboot into flashed partitions.
Sent from my Pixel 3 XL using Tapatalk
use the volume up key and the power button not volume down key
saair321 said:
I have just purchased infinix zero 3 (April 2017). Trying to root device initially via apks and pc software like
1. King root
2. Iroot
3. KingoRoot
4. Framaroot
5. Root genius etc.
Then found some articles telling TWRP method to root device, then i tried to install TWRP (recovery.img) [MT6795] in my infinix zero 3.
while flashing via sp_flash tool it shows successfully installed but when I tried to start my phone with keys combination Vol down + Power button it again shows old "Factory Mode" menu.
I spent nearly 6-7 hours on rooting the device but failed
looking forward to get help from here.
Click to expand...
Click to collapse
use the volume up key and the power button
then choose recovery
then install the SU zip file
Wassup aliens!
So I got this gionee M3 and I rooted it with iRoot and tried to flash recovery in nearly every way possible....... I tried using Flashify, Rashr, TWRP manager..... Nothing worked.
1) On Flashify: I kept selecting Flash recovery but the message I get every time is "Error copying the file, please send me the log file".
2) On Rashr and TWRP Manager: They both say they flashed the file but when I boot into recovery all I see is gray screen with a gionee logo. I also lost my stock recovery this way.
3) On PC: My PC never detects my phone as an adb or VCom device........To check for VCom I tried SP Flash Tools..... didn't detects the device. For Adb I tried Adb devices in command prompt but the devices list is empty.
Some info:
I have USB debug mode enabled.
I have stock 5.0.2 android rom with no recovery just factory safe mode through which I can perform some tasks.
If you need any pics or any info just tell me in the comments.
I hope you guys help me.... Been trying for the last 6 days.
HELP ASAP SOS
Love,
Justin Biebar
Tarun0101 said:
Wassup aliens!
So I got this gionee M3 and I rooted it with iRoot and tried to flash recovery in nearly every way possible....... I tried using Flashify, Rashr, TWRP manager..... Nothing worked.
1) On Flashify: I kept selecting Flash recovery but the message I get every time is "Error copying the file, please send me the log file".
2) On Rashr and TWRP Manager: They both say they flashed the file but when I boot into recovery all I see is gray screen with a gionee logo. I also lost my stock recovery this way.
3) On PC: My PC never detects my phone as an adb or VCom device........To check for VCom I tried SP Flash Tools..... didn't detects the device. For Adb I tried Adb devices in command prompt but the devices list is empty.
Some info:
I have USB debug mode enabled.
I have stock 5.0.2 android rom with no recovery just factory safe mode through which I can perform some tasks.
If you need any pics or any info just tell me in the comments.
I hope you guys help me.... Been trying for the last 6 days.
HELP ASAP SOS
Love,
Justin Biebar
Click to expand...
Click to collapse
Hey i have the same problem. Can you suggest me something regarding this.
A very big question
Hello! I have an argentine copy of the M3, called Hyundai Ultra Energy, same processor, same storage, camera quality, all in the same place. My question is how do I install a custom rom and how do I flash the recovery at first. I use adb commands, but I know that I have to do it with spflash. How is the process? I download the rom, charge the scatter and tilt only in recovery? Would be dangerous? Is more safe to root with King Root?
I accidentally deleted my android os.
I tried to install one using a rom and twrp but it doesent work, so i tried using fastboot and adb tools but didnt work either.
I cannot access my stock recovery to apply an update beacuse of twrp.
Is my phone dead or is there any way to make my phone work again?
It doesent boot, just goes to an unlocked bootloader screen "Device will boot in 5 seconds" just freezes on that screen. I can go to twrp but when i try to install a rom it doesent work "error 7"
Its a Moto G5 XT1670 it has an unlocked bootloader, no root
Hi , this should help you to fix error 7.
https://forum.xda-developers.com/showthread.php?t=2522762
Hello Everyone, Does anybody knows how to root Oppo a3 CPH1837 if anyone knows please help cause right im so lost right now trying to root my phone i tried everything i tried Kingroot it wont its just stuck 01% and i even try every Rooting app to root my android i downloaded them all but non worked, then i tried to install custom recovery sadly i cant boot into fastboot i pressed Power Button and Volume Up somehow i stuck in a Bootloop then i tried to flash file from recovery mode and install from storage device but when i tried to install it says installation failed i even did factory reset still installation failed, next i move on to ADB method to unlock my bootloader i tried type ADB devices and my device is listed but then i type ADB reboot bootloader and next i typed fastboot oem unlock and it says waiting for device next i tried to type Fastboot devices and my devices not listed im frust, lastly i tried to make a request to Oppo Company i emailed them i made a request to unlock my bootloader but sadly they replied they cant unlock my bootloader so please guys help me i tried every possible way and now i dont know what to do, my last hope is by asking you guys who are experts please help me guys i really need it Thank you.
You might wanna read this
link: http://newsvivs.com/root-oppo-a3-cph1837-twrp-recovery-after-a-few-months/