I opened my A10s on Download Mode and tried to install TWRP), so I used Odin and put the .tar file in the AP section. Started and phone installed and shut down immediately afterwards. It does not respond to anything except for when I plug it in my PC, in which the PC makes a sound.
I need help unbricking it quickly.
Related
How do I take my Vibrant that has Bionix on it and return it to factory set, as in when i got it in the box? The whole ODIN isn't working for me. I have the drivers installed on my comp, but when i turn the phone off, it doesn't recognize it. :/
Just find a stock flashable file and flash it through clockwork
U can either keep trying cuz odins a ***** sometimes or try heimdall. I gotta try 5 to 6 times for my laptop to recognize my phone and its drivers. Personally ive never used heimdall but heard its more consistant than odin
Currently running ______________! (<----Insert Rom Name Here)
I can't seem to find one. :/
I would need the stock kernel either?
I have been searching for days.
What do you mean when you turn the phone off? It has to be in download mode in order for it to work, and of that's what you meant and its not being recognized by windows then let me know. I can help you with that.
Sent from my SGH-T959V using Tapatalk
I turn it off to enter download mode (Sorry if i was a bit unclear) I have installed the drivers and it hasn't worked. :/
You doing this on windows? And is it safe to assume you have all the files you need for Odin already? (tar and pit files)
Correct, I followed the guide that was posted and it didn't recognize the fact that I was in download mode on odin. It said that it completed 0/0 threads.
Reboot machine
Right click the Odin shortcut and "run as administrator"
Plug the USB cord into the computer
Remove the battery from your phone, and then plug the USB cord into the phone.
Put the battery back into the phone, and you should then be in download mode.
Those steps worked for me bc like you I was having huge issues getting my pc to recognize the phone. Let me know if that doesnt work.
Also, make sure your Windows Device Manager doesnt have an issue with your phone. Once you open it, it should jump out at you if you do.
If odin isn't working for you, you could use the alternative, Heimdall. The vibrant bible tells you all you need to know. good luck.
I have a little problem and could use some help. I was running superclean 2.9.2 and attempted to switch over to the community rom. Before flashing the rom I downloaded the stock CI500_VZW_DL09_ECLAIR.tar.md5 file and attempted to load that with Odin(yes i chose pda). I have used Odin multiple times in the past w/out issues. Well this time my screen went blank on the Odin was stuck on param.lfs. When i disconnected my phone it now boots to the screen with a phone, exclamation point and a computer. I closed Odin restarted my computer and tried again with the same result. I can still access the download mode and CWM. When I try to complete a nandroid restore the phone goes through the whole process and then when I click to reboot I get the same screen as above. My next step was to download DI01package3.tar.md5. I tried pushing this with Odin and it got stuck on sbl.bin. Please help me get my phone back.
As you have unfortunately discovered, Odin is unreliable. Try to use Heimdall by following the instructions in this thread.
Im in the process but when I select the USB drop down menu all I see is unknown device, I do not see SAMSUNG android composite ADB device, or Samsung composite usb driver.
Could be your download was corrupted...?
Sent from my SCH-I500 using XDA Premium App
I followed the Heimdall thread but I can not get it to work as published. I downloaded all the files and was able to install the Samsung composite usb driver and then launched heimdall-frontend and I can check the box and use the pit file I installed, but the tar.md5 files are not extractable so I dont know what values to put in the boxes.
OK i figured out how to extract the .tar contents and filled them in the appropriate section of frontend and i hit start, which is soon followed by failed to retrieve config descriptor any more suggestions?...WEll I kept on entering download mode and reloading the values for frontend and finally it worked. Thanks for the help, greatly appreciated! No its time to try to get the community rom loaded.
I'm screwed! I was installing
MODEM_I9100XXKE4_REV_02_CL1009835.tar.md5
CODE_I9100XWKE7_CL215725_REV02_user_low.tar.md5
GT-I9100-CSC-XEUKD1.tar
and something happened in Odin3 and it froze, so I took the battery out and tried to restart it and now all I get is a blue and yellow screen that says Android System Recovery. I don't have anything backed up on the device, it didn't come with a microSD card, and it now says
Deleting Cryption Meta Data
-Copying media files....
#manual mode#
updating application....
applying multi-CSC
and that's it. When I hit reboot phone all I get is a screen with a triangle and an android symbol and when I hit apply update from sd card, same symbol, even when I tried to put a .TAR file on my dad's EVO microSD card and put it into the galaxy.
Also, now the USB cable doesn't recognize my phone for some reason so when I go back to ODIN mode it says
Product name - GT-i9100
Custom Binary Download - Yes (1 count)
Current Binary Samsung Official
When I try to restart the phone, it goes straight to the android recovery screen mentioned above, where I can't do anything, and then when I get into the Odin mode, it won't recognize the usb cable so I can link up to Odin3 V1.83 on the computer. Also tried the usb cable on other computers didn't find my phone. Also, as of right now it's not rooted, but I was in the process of rooting, when I realized I missed the Over the Air step so when I Odin3 an insecure.TAR file the WIFI was broke so S2 Root kept saying can't find usb connection even though it was connected, and somewhere along the line when I was trying to restore the radio's by installing the 3 files above, when it crashed something messed up? Now I can't do anything. PLEASE HELP
SO I AM STUCK! Please help????????
Flash the device firmware with Odin when you enter download mode.
Intratech said:
Flash the device firmware with Odin when you enter download mode.
Click to expand...
Click to collapse
Yop
http://www.jayceooi.com/2011/08/14/how-to-restore-stock-firmware-on-samsung-galaxy-s2-video/
I know this topic is old, but I am essentially having the same problem, I don't think it was really solved for the first guy, he can't flash the original rom using odin, because odin doesn't recognize his phone. And that is my issue too, I'm able to get into download mode/odin mode whatever, I plug in the usb cable, nothing, odin doesn't recognize it, I don't get a little sound like I do when I usually plug in a usb cable. Please any ideas would be appreciated.
cowk1ng said:
I know this topic is old, but I am essentially having the same problem, I don't think it was really solved for the first guy, he can't flash the original rom using odin, because odin doesn't recognize his phone. And that is my issue too, I'm able to get into download mode/odin mode whatever, I plug in the usb cable, nothing, odin doesn't recognize it, I don't get a little sound like I do when I usually plug in a usb cable. Please any ideas would be appreciated.
Click to expand...
Click to collapse
Try different versions of Odin (for example, if you're using V4, try V3 1.3 & V3 1.85 and vice versa), try different USB ports (particularly if you're using a port attached to a hub. You need to use a powered port), different USB cables & finally different PC's/different versions of Windoze if you need to.
Also, when you fire up Odin, check Task Manager in Windoze & make absolutely certain Kies or any processes associated with it (if you're not sure what these are, Google/search for them) are not running at the same time. As I've said, you need the drivers that come with Kies to use Odin, but Odin won't work if Kies or anything associated with it is running at the same time.
Try uninstalling Kies on your PC (you need the drivers that come with Kies for Odin to work), rebooting, reinstalling Kies (search for it), rebooting.
If none of that works try cleaning the USB socket of the phone a Q-tip (cotton bud) & some isopropyl alcohol. And if that doesn't work, it might be a case of the USB circuitry of the phone being shot (unless you haven't tried the above steps or are not following the right steps, which we'll never know because we're not there with you).
Was also having the same problem. I managed to get round it by flashing an I9100 package with all the files (PDA, PHONE, BOOT, CSC, PIT) and ticking re-partition. If I'm right, this completely wipes the phone and flashes this over, basically leaving you on a fresh slate.
Hope I helped!
epic118 said:
Was also having the same problem. I managed to get round it by flashing an I9100 package with all the files (PDA, PHONE, BOOT, CSC, PIT) and ticking re-partition. If I'm right, this completely wipes the phone and flashes this over, basically leaving you on a fresh slate.
Hope I helped!
Click to expand...
Click to collapse
Using PIT files is not recommended more brick a phone by flashing PIT than rescue it .
jje
Hi
It seems u tried to flash a sammobile firmware so look to their forum. Why dont u try a phone service?
Sent from my GT-I9100 using XDA
Hello..
I have a Galaxy S plus (GT I9001), I installed TIGER-JELLY BEAN v8 recently, which was working fine. But phone was lagging a lot so I decided to install the stock rom again. I installed Kies(latest version) with drivers and connected my phone to my PC, but it was not detected by Odin. Every time I got Samsung Composite USB Device driver installation failed. So I searched and installed drivers from Here and Here. But they didn't worked either. I tried again after changing USB Cable but still no luck. Then I installed Kies in my Laptop and tried to connect the phone. Still it wasn't recognized.
Things were not working with downloading mode and Stock rom tar file cannot be flashed with recovery mode. So I searched a converter for .tar to flash able .zip file and found THIS . I installed this tool and tried to convert the tar file to zip. Didn't noticed that it require knowing "Mount Point", so I converted the tar file to zip without changing the mount point and copied the file to internal storage of phone and flashed the zip file. After that phone restarted , and stuck at Samsung Logo.
New I can't even to recovery Mode, nothing happens when I keep Pressing Vol Up + Power. Phone starts and stuck at samsung logo. Odin was already not detecting the phone so I tried connecting the phone on Ramdump Mode and some how drivers were installed and odin detected it correctly. But odin can't flash phone in ramdump mode so it didn't worked.
So now the problems I am facing are:
1- Phone is stuck at samsung logo, can't go in recovery mode.
2- Odin not detecting phone in downloading mode.
Is there something what I can do to fix this?
Please help!
Thank you.
Hello.
I have a GT-i9100. It gets stuck in a bootloop, won't let me access recovery mode but it does go into download mode. I have the usb that came with it which I've used for file xfer a lot without any issues. When I try to flash it with odin, odin won't recognise my phone. I have samsung drivers installed and I'm running windows 7. I tried to connect it to 2 different PCs. Is there anything at all that I can do to save my phone? I wanted to flash it so I can try recover some of old photos I have on it. I don't particularly care to make the phone itself usable again as long as I can recover my files.
Thanks for your help.