STOCK ROM for Samsung SM-J320F
This tutorial is for someone that wants to restore their phone to the factory settings and had a custom rom. I am not responsible for BRICKED devices.
Requirements
-stock rom
-Odin 3
- Samsung SM-J320F (I didn't tested on other models)
- USB Cable
- Samsung USB drivers
- Computer/Laptop
Tutorial
- Download and install Samsung USB drivers
- Download and open ODIN 3
- Download the ROM zip and unzip it
- Put the phone into download mode
- Connect the phone to the computer
- In ODIN make sure that the phone is connected
- Chose the file that is correspondent with the option in ODIN (I attached a photo for more help)
- Click on Start and wait while the ROM is flashed
- After the phone restarts the first time it will take some time before it will boot
Notes
- I am not responsive for BRICKED devices
-The files aren't made by me but I only redistributed them here
- As I tested this is not the latest Stock Version that is available
- I only tested this on a SM-J320F (Not SM-J320FN) and works fine. The phone is from Romanian
- I didn't test a SIM card or the FM Radio but I assume they work
Screenshots/Photos
- Odin 3 files Link
- Files needed Link
- Enter download mode Link
- Warning Download mode Link
- Download Mode activated Link
Downloads
- Samsung USB Driver (Provided by me) Download
- Stock ROM (also provided by me) Download
- Odin 3 (official source) Download
- Odin 3 (My Link) Download
Thank you. Now i can fix this phone to install ubuntu on it (linux deploy)
Related
Help Please?
I had my Galaxy Pocket rooted and got the Jellyblast v3 rom, it was doin fine until I checked on the app OTA and check for update, a new update appeared which is the Nemesis 2.5 Hybrid-Holo Editon. It asked me to download it and so I did. When it was done, it asked me if I wanted to install it and so I did, and rebooted. Later I noticed that it was already boot looping. I tried pulling the battery off and to clockwork mode, with the proper procedure..the holds and presses, but still it just kept boot looping. Tried to connect it to the PC using the USB chord and yet it just shows the charging icon and sooner it turns to white. I tried Kies but still it turned white screen all over again; no device found.
Can someone PLEASE help me with this one? PLEASE, PLEASE guys? I know you guys are knowledgable on these kind of issues. :crying:
ShogunSam said:
Help Please?
I had my Galaxy Pocket rooted and got the Jellyblast v3 rom, it was doin fine until I checked on the app OTA and check for update, a new update appeared which is the Nemesis 2.5 Hybrid-Holo Editon. It asked me to download it and so I did. When it was done, it asked me if I wanted to install it and so I did, and rebooted. Later I noticed that it was already boot looping. I tried pulling the battery off and to clockwork mode, with the proper procedure..the holds and presses, but still it just kept boot looping. Tried to connect it to the PC using the USB chord and yet it just shows the charging icon and sooner it turns to white. I tried Kies but still it turned white screen all over again; no device found.
Can someone PLEASE help me with this one? PLEASE, PLEASE guys? I know you guys are knowledgable on these kind of issues. :crying:
Click to expand...
Click to collapse
I also received the same message and downloaded the update file. when ask to Reboot & Install i selected install the device booted in CWM and i selected update from .zip and selected the downloaded file in OTA Download Folder.
The update was successful, yet the ROM looks in BETA version.
Following are the issues i am currently facing in the updated ROM
1. Gallery ICS was Force Closed, later it was solved via uninstalling update.
2. Quick Panel, Nemesis Hub, Nemesis Owner Info & Nemesis Sound Boosters are giving FC messages.
3. OTA is giving INVALID ROM Message while updating.
I´m having the same issues.
After downloading and installing the OTA update, my device is keep stucking in the boot loop.
When I do to the recovery, I always get automatic update with the update.zip, which means I can't get into the full recovery to select another functional image.
Well I hope it's not bricked. Is there a sollution?
Thanks
I have repaired that throught ODIN MODE, like described here:
http://forum.xda-developers.com/showthread.php?t=1921421&highlight=s5300
ShogunSam said:
Help Please?
I had my Galaxy Pocket rooted and got the Jellyblast v3 rom, it was doin fine until I checked on the app OTA and check for update, a new update appeared which is the Nemesis 2.5 Hybrid-Holo Editon. It asked me to download it and so I did. When it was done, it asked me if I wanted to install it and so I did, and rebooted. Later I noticed that it was already boot looping. I tried pulling the battery off and to clockwork mode, with the proper procedure..the holds and presses, but still it just kept boot looping. Tried to connect it to the PC using the USB chord and yet it just shows the charging icon and sooner it turns to white. I tried Kies but still it turned white screen all over again; no device found.
Can someone PLEASE help me with this one? PLEASE, PLEASE guys? I know you guys are knowledgable on these kind of issues. :crying:
Click to expand...
Click to collapse
I have the exact problem. I just can not do anything.No connection to PC I dont know what to d.o Did you solve the problem ShougunSam?
I get the exact same error, and its annoying because I cant use my phone! If anyone can help us.. thanks
Rawhabbero said:
I get the exact same error, and its annoying because I cant use my phone! If anyone can help us.. thanks
Click to expand...
Click to collapse
For all the SGY Users who are facing issues after updating Jellyblast 3.5 to Nemesis (I faced it too) here is the guide to recover your phone:-
First to repair your phone you have to flash stock rom via odin .
Here's the guide for Flashing Stock Rom via Odin
Requirement: 1. A Samsung Galaxy y phone model gt-s5360.
2. A computer running on windows xp, vista, win7 or win8 with proper USB driver installed to connect your phone to computer {If you have not installed USB Driver for Samsung Galaxy Y then to Install USB Driver}
3. Stock Rom file : you can download stock rom according to your choice and region from the xda thread http://forum.xda-developers.com/showthread.php?t=1465800e
4. download ODIN: 1 .85.(google it as i cannot post outside links)
Installation Instruction : [ Charge your phone battery min 80%]
1. Download the required file Odin AND Stock Rom. zip and place in a folder on your desktop .
2. Now extract both with any file extractor.-- Odin v1 .85 .zip and the stock rom zip( file which contains the stock rom i. e 2 .3 .6 )
After that extract Stock Rom file after unzipping you will get three files :
PDA _S5360 _DDLK2.tar,
MODEM_ S5360 _DDLK2.tar &
CSC_S 5360 _DDLK2 .tar
3. Now turn off your Galaxy Y {Remove the battery for 5 -10 seconds and insert it back }
4. Go to Download Mode by Pressing Volume down + Home + Power for 5- 10 sec to boot in Download Mode
5. Now you entered in Download mode select continue by pressing Volume up button .
6. Now attach/ connect your phone to computer via USB cable .
7. Now on your computer open Odin v 1 .85. exe
8.Now make sure you are getting yellow box in ID:COM ( this means that your device is now connected and detected by odin )
9.Now Select those 3 files u download before
PIT - "totoro_0623.pit"
BOOTLOADER - "BOOT" file.
PDA - "PDA" file.
PHONE - "MODEM" file.
CSC - "GT-s5360- MULTI-CSC" file.
10.Now clik on start .
And let be ODIN do its work and wait till you see PASS in green colour it mean the flashing process is complete successfully . Samsung
11.Remove your phone from pc 12.Galaxy Y will auto reboot .
Now if you want to install nemesis Rom, you have to install the nemesis Rom 2.0 (Nemesis Titanium) first and than you should update the Rom by downloading the update file via OTA and flashing the zip file through CWM.
I hope my suggestion will solve your problem.
Did you wipe data and wipe catch before installing ROM??
Did you try flashing original ROM with Odin or others??
---------- Post added at 07:53 PM ---------- Previous post was at 07:48 PM ----------
chaos titan said:
did you wipe data and wipe catch before installing rom??
did you try flashing original rom with odin or others??
Click to expand...
Click to collapse
plz reply
thanks
thepain20 said:
For all the SGY Users who are facing issues after updating Jellyblast 3.5 to Nemesis (I faced it too) here is the guide to recover your phone:-
First to repair your phone you have to flash stock rom via odin .
Here's the guide for Flashing Stock Rom via Odin
Requirement: 1. A Samsung Galaxy y phone model gt-s5360.
2. A computer running on windows xp, vista, win7 or win8 with proper USB driver installed to connect your phone to computer {If you have not installed USB Driver for Samsung Galaxy Y then to Install USB Driver}
3. Stock Rom file : you can download stock rom according to your choice and region from the xda thread http://forum.xda-developers.com/showthread.php?t=1465800e
4. download ODIN: 1 .85.(google it as i cannot post outside links)
Installation Instruction : [ Charge your phone battery min 80%]
1. Download the required file Odin AND Stock Rom. zip and place in a folder on your desktop .
2. Now extract both with any file extractor.-- Odin v1 .85 .zip and the stock rom zip( file which contains the stock rom i. e 2 .3 .6 )
After that extract Stock Rom file after unzipping you will get three files :
PDA _S5360 _DDLK2.tar,
MODEM_ S5360 _DDLK2.tar &
CSC_S 5360 _DDLK2 .tar
3. Now turn off your Galaxy Y {Remove the battery for 5 -10 seconds and insert it back }
4. Go to Download Mode by Pressing Volume down + Home + Power for 5- 10 sec to boot in Download Mode
5. Now you entered in Download mode select continue by pressing Volume up button .
6. Now attach/ connect your phone to computer via USB cable .
7. Now on your computer open Odin v 1 .85. exe
8.Now make sure you are getting yellow box in ID:COM ( this means that your device is now connected and detected by odin )
9.Now Select those 3 files u download before
PIT - "totoro_0623.pit"
BOOTLOADER - "BOOT" file.
PDA - "PDA" file.
PHONE - "MODEM" file.
CSC - "GT-s5360- MULTI-CSC" file.
10.Now clik on start .
And let be ODIN do its work and wait till you see PASS in green colour it mean the flashing process is complete successfully . Samsung
11.Remove your phone from pc 12.Galaxy Y will auto reboot .
Now if you want to install nemesis Rom, you have to install the nemesis Rom 2.0 (Nemesis Titanium) first and than you should update the Rom by downloading the update file via OTA and flashing the zip file through CWM.
I hope my suggestion will solve your problem.
Click to expand...
Click to collapse
IT STILL DOES NOT WORK! I flashed the device, and this is what i get every time! WHAT AM I DOING WRONG?
FLASHING STOCK ROM ON SAMSUNG DEVICES
Today i'm showing how to install stock rom on samsung devices
You want to need
- Odin (i attached on the post)
- Stock rom (odin package) (search your device stck rom on google)
- Download keis for your phone
-Download drivers for your phone
Instruction
- Download your stock rom & odin for your phone , i say you download splited ( SplitFUS2 ) odin package
- install drivers
- install keis
- open odin
- connect your device and boot to download mode
- press&hold (vol- , power and home button) or press&hold (vol- ,vol+ and power button) or search on google
Check when you connect your phone you will see in box ID:COM3
- tick only auto reboot & f.reset time
- add files
- in PDA - PDA_xxxxx_xxxxxx.tar.md5
- in MODEM - PHONE_xxxxx_xxxxx.tar.md5
- in CSC - CSC_xxxxx_xxxxx.tar.md5
if you have - in BOOTLOADER - DefaultCaldataWithboot_xxxxxxxxxx_xxxxx.tar.md5
after you add all files .click start
if Completed odin shows PASS!
you installed stock rom on your samsung device
click Thank
plese comment me if any problems
[email protected]
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
crystysor1 said:
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
Click to expand...
Click to collapse
Samsung USB Drivers
Odin3 v3.07
KU1.9_SM-G318H_4.4.4.tar (recovery+cache)
Root include standalone KingoUser 1.9 apk.
Work on Android 4.4.4
Build: G318HXCU0AOE5
Kernel: 3.10.17-589709
Serial: KTU84P.G318HXCU0AOE8
hello,
can you post the steps in order to root the SM-G318H ?
thanks !
Hi, Where is the file?
I don't found...
Well so let's go for a step by step.
WARNING: Warranty will be definitly remove after rooting your phone !
You need an USB data cable, generally provided with phone pack.
1 - Download Samsung USB Drivers and install it.
It can be found on official Samsung Developers website [Not enough right to post links].
2 - Download Odin3 v3.07, can be found everywhere !
3 - Download KU1.9_SM-G318H_4.4.4.tar [Not enough right to post links].
4 - Connect the phone and power it up in Odin mode by pressing Volume down + home + Power.
5 - Start Odin3 exe and load the tar file into PDA, only Auto Reboot will be checked in Option section.
6 - When Odin has find the ID:COM press Start.
Phone automatically reboot in KingoRoot recovery mode to install root service and KingoUser 1.9 apk, it's take about 30 sec and then auto reboot in normal way.
Done with no datas loss (backup them before in case of), you can upgrade KingoUser 1.9 to the latest 2.0.2.
Be aware that the phone still has Kingo recovery image and you can't have a recovery mode [Volume up + home + power] for update.zip, clear/wipe data, etc...
To grant this, put back original recovery PDA file image with Odin (step 4 to 6).
It can be extract from official firmware (recovery.img) and repack into tar/tar.md5 file for PDA.
Feedbacks and thanks are welcome.
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
crystysor1 said:
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
Click to expand...
Click to collapse
hi i would like very much you could give me the KU1.9_SM-G318H_4.4.4.tar
because i seem unable to find it... =(
plz help the world!!!!! =)
thank you very much Mr. Madgik nop90
:good:
AutoROOT Galaxy Trend 2 Lite SM-G318H
After work self made can be found here
AutoROOT: KU1.9_SM-G318H_4.4.4.tar
MD5: 360F5D6703412A5E9D8F77CC4EA6AD35
Size: 22.5 Mo - 23 633 920 octets
ge.tt/89u6oOO2
See you soon . . .
thank's
crystysor1 said:
How to root Samsung Galaxy Trend 2 lite - SM-G318H?
Click to expand...
Click to collapse
I rooted my Trend 2 lite SM-G318H with Kingo root for Windows.
It took a long time, but succeeded fine.
Cheers.
Madgik nop90 said:
After work self made can be found here
AutoROOT: KU1.9_SM-G318H_4.4.4.tar
MD5: 360F5D6703412A5E9D8F77CC4EA6AD35
Size: 22.5 Mo - 23 633 920 octets
ge.tt/89u6oOO2
See you soon . . .
Click to expand...
Click to collapse
hi, do you think it will work for my Galaxy Ace 4 Neo G318H?
someone managed to do the root ? Samsung G318H trend lite 2?
the metode was described in post nr5 working on my sm g318h phone thank you
KU1.9_SM-G318H_4.4.4.tar
can someone send me this file ????? please so much
Don't really see the point as there are no roms out for this phone to install or am I missing something, can certain roms cooked for other Galaxy devices be installed?
I have a question
Madgik nop90 said:
Well so let's go for a step by step.
WARNING: Warranty will be definitly remove after rooting your phone !
You need an USB data cable, generally provided with phone pack.
1 - Download Samsung USB Drivers and install it.
It can be found on official Samsung Developers website [Not enough right to post links].
2 - Download Odin3 v3.07, can be found everywhere !
3 - Download KU1.9_SM-G318H_4.4.4.tar [Not enough right to post links].
4 - Connect the phone and power it up in Odin mode by pressing Volume down + home + Power.
5 - Start Odin3 exe and load the tar file into PDA, only Auto Reboot will be checked in Option section.
6 - When Odin has find the ID:COM press Start.
Phone automatically reboot in KingoRoot recovery mode to install root service and KingoUser 1.9 apk, it's take about 30 sec and then auto reboot in normal way.
Done with no datas loss (backup them before in case of), you can upgrade KingoUser 1.9 to the latest 2.0.2.
Be aware that the phone still has Kingo recovery image and you can't have a recovery mode [Volume up + home + power] for update.zip, clear/wipe data, etc...
To grant this, put back original recovery PDA file image with Odin (step 4 to 6).
It can be extract from official firmware (recovery.img) and repack into tar/tar.md5 file for PDA.
Feedbacks and thanks are welcome.
Click to expand...
Click to collapse
You said: "Be aware that the phone still has Kingo recovery image and you can't have a recovery mode [Volume up + home + power] for update.zip, clear/wipe data, etc...
To grant this, put back original recovery PDA file image with Odin (step 4 to 6).
It can be extract from official firmware (recovery.img) and repack into tar/tar.md5 file for PDA."
After doing the root, can I update my phone??????
If the answer of this question is no, can you post a link to another file that doesn't do that?
Can any one please help me root my samsung galaxy trend neo SM-G318H
BASEBAND VERSION SM-G318HXCU0AOG2
Root Samsung Galaxy Trend 2 lite - SM-G318H android version 4.4.4
ROOT for all Samsung SM-G318H android version 4.4.4 Phones.
WARNING: Warranty will definitely be void after rooting your phone !
You need an USB data cable, generally provided with phone pack.
Requirements before rooting process.
A - Enable usb debugging mode on your phone.
B - Check if trust from Unknown Sources is enabled on your phone.
C - Download Samsung USB Driver for Mobile Phones and install it.
D -When connecting your phone your PC must give some notification that you connected your phone.
Rooting
1 - Download Odin3 v3.10.6 latest version.
2 - Locate and Download SM-G318H_4.4.4cokbasit.org.tar (i can't submit a direct download link as Junior Member)
3 - Start (Run as Administrator) Odin3 v3.10.6.exe and click on the --> CP <-- button to select and load the downloaded tar file into Odin. Make No Mistake you must see the path of the downloaded tar file after the checked CP checkbox.
(Using an older version of Odin click on the --> PHONE <--button to select and load the downloaded tar file into Odin. Make a No Mistake you must see the path of the downloaded tar file after the checked PHONE checkbox)
4 -Boot your disconnected SM-G318H phone into Download Mode by pressing Volume down + home + Power together (long press until the boot screen appear). A warning message will flash, now press Volume Up key to proceed to Download Mode. Now connect your SM-G318H phone, in Odin you should see a highlighted COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. That means Odin has successfully detected your SM-G318H phone at a ID:COM Port if not the Case keep on trying, Or find a better tutorial about Odin flashing. Now quick proceed to installation Press Start.
5 - Once completed, you would see “PASS!” message in ID:COM.
6 - Your SM-G318H Phone should automatically reboot after completion And You have ROOT
Including SuperUser ase Root Access Manager for your SM-G318H phone.
download==> 4.4.4cokbasit.org.tar
mediafire.com/download/moj58dj0rkw0jif/SM-G318H_4.4.4cokbasit.org.tar
Tweak your Rooted SM-G318H to absolute top performance. I recommend the Ultimate Utility PowerToolbox a MustHave for android PowerUsers the All-In-One Toolbox containing a lot Powerful system utilities (google playstore). Warning don't apply risky changes that can seriously mash up (brick) your phone or resulting in a unstable frequently crashing system. Some changes can't be rolled back. So only apply risky changes with outstanding knowledge of the android system. Otherwise you have flash the (original) Stock firmware including the root tar for SM-G318H again and reinstall all your apps.
All-In-One Toolbox APK==> imoblife.toolbox.full-5.2.9.1.apk
Feedbacks and thanks are welcome
Mine is not either of those. It's Galaxy Trend Neo! Will this steps work? How do i go about rooting it if the steps provided wont help? ?
skullhack said:
Mine is not either of those. It's Galaxy Trend Neo! Will this steps work? How do i go about rooting it if the steps provided wont help?
Click to expand...
Click to collapse
Yes ROOT for every SM-G318H device! Unfortunately i still can't submit a direct download link for the SM-G318H_4.4.4cokbasit.org.tar File Essential for ROOT on SM-G318H devices. Follow the steps and you will have ROOT on your SM-G318H phone.
mediafire.com/download/moj58dj0rkw0jif/SM-G318H_4.4.4cokbasit.org.tar
Download from there.
Feedbacks and thanks are Welcome
Let me get the package. Will get back to you.
Dear Members help is needed!
The device was running 5.1.1 version and upgraded to 7.0 with FOTA.
Then the device start to stuck and restart until I got "SAMSUNG GALAXY S6 edge powered by android"
And stuck at this screen forever (NO BOOTLOOPS).
Things i tried:
1. Flash with ODIN same ROM version and downgrade versions (Didn't helped)
2. Smart Switch restore, it finished successfully but Didn't helped (Same screen)
3. TWRP ODIN and install custom ROM (Didn't helped)
4. no-verity-opt-encrypt-5.1 install (Didn't helped)
More Details:
1. Cannot turn off the device, just when i'm in TWRP and pressing POWER OFF
(WHEN USB CABLE IS CONNECTED TO DEVICE IT START AUTOMATICALLY!)
2. Device Manager recognize device as "SAMSUNG Mobile USB Modem" under Download Mode
3. TWRP is the only thing that working as recovery
(After installing Original ROM Recovery doesn't works)
4. When switching to ADB Sideload device manager recognize as SAMSUNG Android ADB interface.
5. When i'm in TWRP PC shows just Internal Storage.
Any other ideas to make this phone to work?
Hi there I'm new to rooting upon stumbling here I found this community on googlGoogle. I followed every step the one I can't is the TWRP recovery booting part... My device is bootloader unlocked, oem unlocked, USB debugging on, this is where I'm stuck
- downloaded XAR t970xxu2buj3 my version
- downloaded VB disabled
- downloaded samsung drivers
- power tab off, plug USB into pc,
- hold volume up and down together got into download mode but before that I press long volume down to enable boot loader then it did a factory reset
- after whet into download mode and extracted the xar downloaded into ODIn
- Downloaded the TWRP file here extract on Odin freezes lol... reboot now factory settings no twrp.... 8-> HAaalp me
- edited
I figured it out it I forgot the adb part putting img file to get twrp on