Related
Great news! thanks to @SamwiseStenner who develop the xposed module.
Note: TWRP recovery and root(supersu o Magisk) is needed.
In our stock roms, face recognition is not available in smartlock. If you have a cutom rom with face reconition enable, skip step 1.
1a. Nougat: Flash open_gapps-arm64-7.1-nano-20180201_FACEUNLOCK4.ziphttps://drive.google.com/open?id=1zZ3CKy9HhrCmeJ1j7LN8DU8k6QhB8ODF
1b. Oreo 8.1 open_gapps-arm64-8.1-nano-20171215-UNOFFICIAL_FACEUNLOCK https://drive.google.com/open?id=1N-_qWvdgX05KPL4Rab4Wt-O1THUlG1Sc
1.c Oreo 8.0 FACE_UNLOCK_8.0.zip https://drive.google.com/open?id=1t6bLiDqGxkqM0XRwTXPVO5ZtVLW-5IoB
2. In settings/security/trust agents, enable smart lock
3. In setting/security/smart lock Trusted face will be available. Configure your face.
4a:AEX 8.1 release newer than version of 10th February 2018: Enable settings/Extensions/Lockscreen/Locks creen UI/face auto unlock. All done! skip all the following steps.
4b:Nougat and Oreo 8.0. Install XposedInstaller_by_dvdandroid_31_10_17.apk.
5a. If you have supersu you need to install xposed with the Xposed installer just installed.
5b (my option). If you have magisk, you can install the magisk module Xposed Framework (SDK 25 for Android 7.1 and SDK 26 for Oreo 8.0) under in Magisk manager under Downloads menu.
6. Reboot. The reboot time is quite long...about 3 minutes...WAIT.
7. Now in app Xposed installer you would get the green status (Xposed framework active). (If you get the orange status you have to rebbot again. If you get red status, Xposed is not installed: try step 5 again)
8. In Xposed installer menu "Downloads", search InstantFaceUnlock. Enter, move to tab VERSIONS and push "Save" and the application IFU will be installed.
9. In Xposed installer menu "Modules", check "Instant Face Unlock"
10. Reboot.
11. Have fun!!!
More info:
https://forum.xda-developers.com/xposed/modules/xposed-instant-unlock-t3688329#post74144137
https://youtu.be/0GesWlkQDDI
https://youtu.be/ug5xUA8dbe0
https://youtu.be/bHwJybn5fFM
https://youtu.be/lWlXZCmPsWo?t=2m26s
http://www.ifuun.com/a201712077575375/
Didn't work on B35. at least me.
WesTD said:
Didn't work on B35. at least me.
Click to expand...
Click to collapse
Not working for me either :/ but it was working fine on b32, weird lol
wow i need this but im on b35
Predatorhaze said:
wow i need this but im on b35
Click to expand...
Click to collapse
J0nhy said:
Not working for me either :/ but it was working fine on b32, weird lol
Click to expand...
Click to collapse
WesTD said:
Didn't work on B35. at least me.
Click to expand...
Click to collapse
I have updated the procedure with a new zip to flash in step 1 that solves the B35 problem!, Try again. Regards
yeah,it works for me on b35
Predatorhaze said:
yeah,it works for me on b35
Click to expand...
Click to collapse
Do you already have Face unlock working?
p82maarj said:
Do you already have Face unlock working?
Click to expand...
Click to collapse
Yes it's working,just follow the steps
---------- Post added at 09:58 AM ---------- Previous post was at 09:56 AM ----------
p82maarj said:
Do you already have Face unlock working?
Click to expand...
Click to collapse
Yes it's working.just follow the steps
Does it work on LineageOS 14.1?
Edit - It worked.
Thnx buddy
Will it work with this rom?
This face unlocking from smart lock is no good... It unlock with a simple photo...
Aviver said:
This face unlocking from smart lock is no good... It unlock with a simple photo...
Click to expand...
Click to collapse
well, if you get robbed or you lose it on the street i don't believe that they'll get a photo of you. It's enough.
This might be useful for stock. But I can't see why you can't just flash GApps Stock package for literally any other rom then this is not needed at all, face unlock works perfectly without the need for this fuss.
icapus said:
Will it work with this rom?
Click to expand...
Click to collapse
No I tried it. The installer is for oreo 8.1. Rom is 8.0. Any way to install on stock Oreo 8.0?
Flashed on latest AEX and it is working well. Thanks again.
wineds said:
No I tried it. The installer is for oreo 8.1. Rom is 8.0. Any way to install on stock Oreo 8.0?
Click to expand...
Click to collapse
Yes, I think is possible. I will try this afternoon but I can't test because I'm on 8.1. I will upload this afternoon, please try and report if it works.
Regards
icapus said:
Will it work with this rom?
Click to expand...
Click to collapse
Spooderman46 said:
This might be useful for stock. But I can't see why you can't just flash GApps Stock package for literally any other rom then this is not needed at all, face unlock works perfectly without the need for this fuss.
Click to expand...
Click to collapse
wineds said:
No I tried it. The installer is for oreo 8.1. Rom is 8.0. Any way to install on stock Oreo 8.0?
Click to expand...
Click to collapse
Hello, I have uploaded a version for Oreo 8.0. You also need the Xposed and Xposed module for fast face unlock. Please test and tell me if it is working. Regards.
p82maarj said:
Hello, I have uploaded a version for Oreo 8.0. You also need the Xposed and Xposed module for fast face unlock. Please test and tell me if it is working. Regards.
Click to expand...
Click to collapse
I think it's working. Recognises face and unlocks. But you still need to swipe up? Thanks! Great work.
AEX has the option to unlock without swiping up, just sayin.
Duplicate of post on the honor 9 forums, because no one looks on there for stuff anymore
lets make this very clear:
I HAVE NOT DEVELOPED THIS, IT WAS LINKED IN ANOTHER FORUM BY ANOTHER MEMBER WHO ALSO DID NOT DEVELOP IT
this is actually developed by a member over at the Chinese website '7to' http://www.7to.cn, so its a recovery based on TWRP 3.2.1 but seems to have its own UI and feature set.
WORKING
Code:
[COLOR="Black"][LIST]
[*]Boots to TWRP!
[*]Can flash images to system (MUST BE ON SD CARD!!!!)
[*]ADB
[*]Mount system R/W
[/LIST][/COLOR]
NOT WORKING
Code:
[COLOR="Black"][LIST]
[*]Decryption
[*]Data backup
[*]Flash from internal storage (since it cant be decrypted)
[/LIST][/COLOR]
I am not responsible if you brick your device, flash with caution and ONLY on an 8.1 GSI where your current TWRP doesn't work.
This does not do anything to capacitive keys, if they work before flashing they will work after flashing
INSTALLATION
'fastboot flash recovery_ramdisk recovery.img
DOWNLOAD
https://drive.google.com/file/d/1RgerdkXY-B-8XV5buloeCyKYrA2B3Bvf/view?usp=sharing
Credit to whoever the creator of this is!
ambitiousButRubbish said:
Duplicate of post on the honor 9 forums, because no one looks on there for stuff anymore
lets make this very clear:
I HAVE NOT DEVELOPED THIS, IT WAS LINKED IN ANOTHER FORUM BY ANOTHER MEMBER WHO ALSO DID NOT DEVELOP IT
this is actually developed by a member over at the Chinese website '7to' http://www.7to.cn, so its a recovery based on TWRP 3.2.1 but seems to have its own UI and feature set.
WORKING
Code:
[COLOR="Black"][LIST]
[*]Boots to TWRP!
[*]Can flash images to system (MUST BE ON SD CARD!!!!)
[*]ADB
[*]Mount system R/W
[/LIST][/COLOR]
NOT WORKING
Code:
[COLOR="Black"][LIST]
[*]Decryption
[*]Data backup
[*]Flash from internal storage (since it cant be decrypted)
[/LIST][/COLOR]
I am not responsible if you brick your device, flash with caution and ONLY on an 8.1 GSI where your current TWRP doesn't work.
This does not do anything to capacitive keys, if they work before flashing they will work after flashing
INSTALLATION
'fastboot flash recovery_ramdisk recovery.img
DOWNLOAD
https://drive.google.com/file/d/1RgerdkXY-B-8XV5buloeCyKYrA2B3Bvf/view?usp=sharing
Credit to whoever the creator of this is!
Click to expand...
Click to collapse
YunLin85 developed i think
YazumiWuHung said:
YunLin85 developed i think
Click to expand...
Click to collapse
And do you know if he developed/published newer version?
Thanks.
very nice, i'll take a look into this
thanks!
I just want to use the magisk,and then i will try it on treble-rom.
couple of bugs
1. screen brightness is somehow set to 182%
2. cannot turn the screen off, it just sets it to a lock screen where it makes it slide to unlock, but the screen is not off, still on
3. its in chinese, i got to change it to engish, but some users arent smart enough to do that
crayonicle said:
2 bugs
1. screen brightness is somehow set to 182%
2. cannot turn the screen off, it just sets it to a lock screen where it makes it slide to unlock, but the screen is not off, still on
3. its in chinese, i got to change it to engish, but some users arent smart enough to do that
Click to expand...
Click to collapse
I have this installed on my honor 9, and those bugs don't seem to occur, and, I know it's in Chinese, but it's easy enough to go into the settings and change it. If the users aren't smart enough to click 2 buttons they shouldn't have an unlocked bootloader.
I did actually try looking for a newer version in the 7to forums, but since it was all in Chinese (and Google translate wasn't too helpful) and the fact that the website is rubbishly designed, I couldn't find anything, but, this works for now, at least it can flash stuff and boots, that ls really all that's needed.
Actually, in chinese forums, its not hard to find this.
Here I share the latest twrp, which could be used in all kirin services and support treble roms in theory, and its develoler is "残芯此生不换".
drive.google.com/file/d/17h0LRPXpWu_dZtFxLEpFGz2Oheh8K8mq/view?usp=drivesdk
741543825 said:
Actually, in chinese forums, its not hard to find this.
Here I share the latest twrp, which could be used in all kirin services and support treble roms in theory, and its develoler is "残芯此生不换".
drive.google.com/file/d/17h0LRPXpWu_dZtFxLEpFGz2Oheh8K8mq/view?usp=drivesdk
Click to expand...
Click to collapse
Did you tried it?
I have a P10, this should be flashed in this way? fastboot flash recovery_ramdisk xxxxxx.img
Thanks a lot! Thanks to this i was able to flash gapps on Android 9.0 on Honor 9
streetu said:
Thanks a lot! Thanks to this i was able to flash gapps on Android 9.0 on Honor 9
Click to expand...
Click to collapse
Android 9 . Which rom for H9 ?
k1ks said:
Android 9 . Which rom for H9 ?
Click to expand...
Click to collapse
For me PHH AOSP works fine Just flashlight and probably NFC aren't working
streetu said:
For me PHH AOSP works fine Just flashlight and probably NFC aren't working
Click to expand...
Click to collapse
Thanks , will test after Havoc.
Anyone know if there have been any updates for this
Why not update the system, ？
My device is Huawei honor v9
Anytime tested this on the p20 Pro?
赛文 to的广告太多了。。。
working on p smart
741543825 said:
Actually, in chinese forums, its not hard to find this.
Here I share the latest twrp, which could be used in all kirin services and support treble roms in theory, and its develoler is "残芯此生不换".
drive.google.com/file/d/17h0LRPXpWu_dZtFxLEpFGz2Oheh8K8mq/view?usp=drivesdk
Click to expand...
Click to collapse
Hi, can you or anybody upload this TWRP please?
The Link is not working (Google Drive say: The owner moved the file to recycle bin)
Thanks
Pixel Experience for treble devices.
Share these link to install The version of Android P in our MI Note 2. I tested it and it works until now quite fluid.
DON'T FLASH GAPPS, ALREADY INCLUDED
Download link: https://github.com/EnesSastim/Downl...A-2018-08-31/PixelExperienceP-arm64-aonly.zip
Instructions for installation: https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
new build the problem detection card corrected sim recognizes them
the bad the camera does not work and is slow.
Download link: https://github.com/EnesSastim/Downl...A-2018-09-20/PixelExperienceP-arm64-aonly.zip
sgt_peppers said:
Pixel Experience for treble devices.
Share these link to install The version of Android P in our MI Note 2. I tested it and it works until now quite fluid.
DON'T FLASH GAPPS, ALREADY INCLUDED
Download link: https://github.com/EnesSastim/Downl...A-2018-08-31/PixelExperienceP-arm64-aonly.zip
Instructions for installation: https://forum.xda-developers.com/pr...ce-development/9-0-pixelexperience-p-t3833294
Click to expand...
Click to collapse
The sim card it's not working in my case ..any suggestion?
Xiaby said:
The sim card it's not working in my case ..any suggestion?
Click to expand...
Click to collapse
Not in my particular case. Maybe flashing magisk?
sgt_peppers said:
Not in my particular case. Maybe flashing magisk?
Click to expand...
Click to collapse
Nope, I just flashed the latest fw 8.8.30 then the treble enable zip file followed by the rom .. maybe I will try it again thank you.
Ps there are still the double voice while phone calling and the switch camera which requires 30 sec bugs in this rom?
Xiaby said:
Nope, I just flashed the latest fw 8.8.30 then the treble enable zip file followed by the rom .. maybe I will try it again thank you.
Ps there are still the double voice while phone calling and the switch camera which requires 30 sec bugs in this rom?
Click to expand...
Click to collapse
works perfect just that you notice the temperature is somewhat high at times
sgt_peppers said:
works perfect just that you notice the temperature is somewhat high at times
Click to expand...
Click to collapse
Thank you trying it later
Xiaby said:
Thank you trying it later
Click to expand...
Click to collapse
Restart my device and now the SIM does not recognize me
sgt_peppers said:
works perfect just that you notice the temperature is somewhat high at times
Click to expand...
Click to collapse
could ytou please share a link to the latest firmware? I cannot seem to find it on this site?
CAn i just use TWRP?
Experts Please answer this. The rotation is :
Wipe data , system , cach ,delvik
Flash Treble
Flash image of Android P ?
If this is the order, this rom doesn't work . It says password correct, Data decrypted but seems corrupted
Andrikkos said:
Experts Please answer this. The rotation is :
Wipe data , system , cach ,delvik
Flash Treble
Flash image of Android P ?
If this is the order, this rom doesn't work . It says password correct, Data decrypted but seems corrupted
Click to expand...
Click to collapse
Before you flash Treble, you need to have the right firmware/MIUI rom flashed. The MN2 Treble thread should give you an indication what is the minimum version to use. I used the latest 8.8.30 EU multi rom and that works fine with Treble. I had no luck with any of the P GSI images though. They all had some kind of shortcoming that was a deal breaker for a daily driver. Most notably due to most if not all P GSI images being rooted, could not get Magisk to hide it well enough to get Google Pay to work. I used up to the latest (v 17) Magisk image that works with Treble. I also had an other app I need for work (Concur) that would not work for the same reason. There is also overheating and battery drain issues with most GSI images. I tried many over a day and a half of stuffing around with Treble. I am now back on the above mentioned EU rom. Treble is too young for my needs just yet. Better luck to you.
The_real_hati said:
Before you flash Treble, you need to have the right firmware/MIUI rom flashed. The MN2 Treble thread should give you an indication what is the minimum version to use. I used the latest 8.8.30 EU multi rom and that works fine with Treble. I had no luck with any of the P GSI images though. They all had some kind of shortcoming that was a deal breaker for a daily driver. Most notably due to most if not all P GSI images being rooted, could not get Magisk to hide it well enough to get Google Pay to work. I used up to the latest (v 17) Magisk image that works with Treble. I also had an other app I need for work (Concur) that would not work for the same reason. There is also overheating and battery drain issues with most GSI images. I tried many over a day and a half of stuffing around with Treble. I am now back on the above mentioned EU rom. Treble is too young for my needs just yet. Better luck to you.
Click to expand...
Click to collapse
Can you share the firmware link ?
Andrikkos said:
Can you share the firmware link ?
Click to expand...
Click to collapse
https://xiaomi.eu/community/
The_real_hati said:
https://xiaomi.eu/community/
Click to expand...
Click to collapse
yes finally lol. Thanks a bunch i could not find the firmware anywhere
---------- Post added at 06:44 AM ---------- Previous post was at 06:38 AM ----------
The_real_hati said:
https://xiaomi.eu/community/
Click to expand...
Click to collapse
Mate? No firmware/ Just another site link to get lost in? :-\
Bryceicle1971 said:
Mate? No firmware/ Just another site link to get lost in? :-\
Click to expand...
Click to collapse
Forums/MIUI ROM releases, self explanatory really. Same forum concept as it is here at XDA. I'm not going to link directly to the download because you should be doing some homework about suitability for your needs.
The_real_hati said:
Forums/MIUI ROM releases, self explanatory really. Same forum concept as it is here at XDA. I'm not going to link directly to the download because you should be doing some homework about suitability for your needs.
Click to expand...
Click to collapse
pmsl. 'junior member' just like me its easier to be humble an admit you made a mistake an do not understand my issue or do not have the info I need
Bryceicle1971 said:
pmsl. 'junior member' just like me its easier to be humble an admit you made a mistake an do not understand my issue or do not have the info I need
Click to expand...
Click to collapse
Piss off "mate", you wouldn't know the first thing about me. You did NOT ask for the link, Andrikkos did. Don't see him complaining. Get your threads right dumbass
https://androidfilehost.com/?fid=1322778262903998408
The_real_hati said:
Piss off "mate", you wouldn't know the first thing about me. You did NOT ask for the link, Andrikkos did. Don't see him complaining. Get your threads right dumbass
Click to expand...
Click to collapse
Whatever. Your being obnoxious. Given up on Android P. Overheats an RIL issues. Every time. And you just proved my point
sgt_peppers said:
Restart my device and now the SIM does not recognize me
Click to expand...
Click to collapse
Did yuo find any solution?
I compiled the GSI overnight, its aosp_arm64_a Legacy GSI, because the ones I keep downloading are all August security patch and I wanted it a little more up to date. I got the source directly from google and built it myself. AB is now uploaded as aosp_arm64_ab. A only is also up as aosp_arm64_a-aosp. I ran it on my One Plus 5, NFC was buggy but the camera, ril, Bluetooth, wifi, and everything I tried out worked. this is vanilla, so its bare bones. no apps besides the basics, no mods or any customizing. As this is a GSI it should be useable on many devices, I can only help you with the devices that I own, pixel XL and one plus 5. If you have a device other then that, you will have to find help from someone knowledgeable about that device. I have had success using twrp and fastboot to flash the system image. I was told doing it via fastboot is the best, so you can disable verified boot, then flash, then format all in one shot. My device did not require me to disable the verify boot. From my end it was literally as simple as 3 commands via fastboot and then restart the device and I was in. I flashed a 50mb gapps package from xda here, and magisk. took some photos, connected my Bluetooth speaker, made a call. sent some texts, installed a few apps. I will be staying on stock. But only because my device has stock pie, and the theming from one plus far trumps google.
aosp_arm_a-userdebug and aosp_arm_ab-userdebug added
https://mega.nz/#F!Xh4g2KSB!EJIGQtvLFKzHzqKXmZI7tg
Sources: https://source.android.com/setup/build/gsi
Do you find it smoother than HOS Pie Beta ?
Thanks for your share! Awesome, I don't need/use NFC.
korm85 said:
Do you find it smoother than HOS Pie Beta ?
Click to expand...
Click to collapse
It's very fast. install and boot was very fast. but I just discovered my home button does not work. however I don't assume that would be a difficult fix. the back and pages button are working. its very bare tho, you need to install everything you want manually. Which I prefer, it gives me more control over my phone I find. Hydrogen works ok too, it just requires a bit of work to get play store going and remove all the bloatware. GSI camera worked fine from boot.
Dzol Cp said:
Thanks for your share! Awesome, I don't need/use NFC.
Click to expand...
Click to collapse
upload is at finished now
can a mod change the title to reflect that this will have the AB and A GSI not just A? Please and thank you.
Thanks! Any chance of an arm build?
Got no boot ......?!
Device's nubia z17 sd835
91egt said:
Thanks! Any chance of an arm build?
Click to expand...
Click to collapse
yea, it will be up in the morning. I did A and just about done AB for arm64, then will do A and AB arm
aljoscha81 said:
Got no boot ......?!
Device's nubia z17 sd835
Click to expand...
Click to collapse
how did you flash it? I didnt use trwp, I used fastboot from the pc
godkingofcanada said:
how did you flash it? I didnt use trwp, I used fastboot from the pc
Click to expand...
Click to collapse
Maybe thats the matter i always use twrp but got..... So far never problems ....?
Make it a difference?
aljoscha81 said:
Maybe thats the matter i always use twrp but got..... So far never problems ....?
Make it a difference?
Click to expand...
Click to collapse
It shouldn't. But its twrp. Weird things happen. Use fastboot. Its only 3 or 4 steps. The tutorial is on the google gsi website. I tried via twrp and had no issues however. It started to launch then rebooted, second boot it loaded OK
Cracked screen. But you can see the build info
godkingofcanada said:
Cracked screen. But you can see the build info
Click to expand...
Click to collapse
Ok.. will test out with fastboot thanks a lot!
aljoscha81 said:
Ok.. will test out with fastboot thanks a lot!
Click to expand...
Click to collapse
No problem
AB will be posted in about 2-3 hours. After that I will build A only Arm. It should be available by morning.
a/b please
irfaniphank2 said:
a/b please
Click to expand...
Click to collapse
Aosp_arm64_ab-userdebug will be on the link in post 1 in about 90 min. Its 90% done building.
godkingofcanada said:
Aosp_arm64_ab-userdebug will be on the link in post 1 in about 90 min. Its 90% done building.
Click to expand...
Click to collapse
:good::good::good::good::good::highfive::highfive::highfive:
AB arm64 legacy is now uploaded to the link in post one. Arm A and AB will show up over night. Starting with a in the morning. It takes about 4.5 to 5 hours to build
Have any one tried
Dynamic System Update in Mi A3 of any of the gsi .. ?
Tried ? Whats the status of the device in DSU.?
Yes it supports DSU, enable dsu via Adb and download any Google gsi, and it's perfect
Could you please tell me the installation steps of a GSI using DSU
Ramkiganesh said:
Could you please tell me the installation steps of a GSI using DSU
Click to expand...
Click to collapse
https://developer.android.com/topic/dsu
Onurnymr10 said:
https://developer.android.com/topic/dsu
Click to expand...
Click to collapse
Hone through the Steps , i have tried installing Oxygen Os GSI .., it asked for security unlock then a notification is showing that DSU is being installing after 5 secs notification disappearing and no update from it.:crying:
Onurnymr10 said:
Yes it supports DSU, enable dsu via Adb and download any Google gsi, and it's perfect
Click to expand...
Click to collapse
Did u mean only Android 10 , Android 11 dev preview is installing upto 75% and it is cancelling
Ramkiganesh said:
Did u mean only Android 10 , Android 11 dev preview is installing upto 75% and it is cancelling
Click to expand...
Click to collapse
I tried installing android 11 preview but the installing notification disappears in 5 secs. Could you give the link to the gsi you downloaded and did you perform steps differently from the official guide?
czar1212 said:
I tried installing android 11 preview but the installing notification disappears in 5 secs. Could you give the link to the gsi you downloaded and did you perform steps differently from the official guide?
Click to expand...
Click to collapse
I have performed same steps
Even i cant install dev prev 11