HI. ( Sorry for my english )
My device M8S is tottaly bricked. Until the brick this device looged to google store, google loged this device as SkyKirin MS8. ( AMLOGIC S812 2g/8g)
I need firmware for this device ,i dont remember everting , but i looking android settings it seems to me i fund "SkyKirin and "n200".
I flash in sdcard megatron firmware for m8s and ms9 , work fine , but wifi not work, and see only 4gb.
I decided to flashing other firmwares , there is results :
20150129-eny-m8s.zip - no wifi , remonte control ok , power off not working
acemax M8S_0313_0602 kodi 14.2 - no wifi , remonte control buttons reversed.
m8s_ap6330_8g2g_150818_USB - no wifi, no ethernet, no remonte control......
KoDi_EM8S_eng_1114_20150123 - no wifi...j dont remember what else not working
All this firmwares see only 4gb ram :/
DEVICE M8S 2G/8G
NAND (SK Hynix H27UCG8T2ETR BC) 8G
WIFI AP6330
Does anybody know how to modify the Megatron-S812-M8S-M9 rom to see 8 gb and wifi working ? Then it to be perfect.
Same problem here.... :/
same issue i have
For un bricking theses device's it may be worth taking a look here http://freaktab.com/forum/tv-player-support/amlogic-based-tv-players/s802/eny-acemax-ott/knowledge-tutorials/553667-how-to-unbrick-amlogic-s805-s802-s812-s905-video-tutorial
Did you guys every resolve this?
DEVICE M8S 2G/8G (SkyKirin/n200)
WIFI AP6330
MBX/n200/n200:4.4.2/KOT49H/20160706:user/test-keys
This is for the A95X 2gb 16gb s905 ONLY // WIFI - BCM4335
After searching for hours I came across this forum with a link to the firmware.
I know this box may not be used anymore but I hope it helps anyone else and saves them sometime. I used USB_Burning_Tool_v2. Remove Chinese symbols.
https://mega.nz/#!vQUG0IzD!bJg1BAz8lT_UaU8TQCXZagxTotknG3zUfzp7uIyTwZg
Source Site : http://www.tvboxforum.com/archive/index.php?thread-1560-1.html
ADDED :: Still looking to find a way to upgrade past 5.1.1. if anyone has any ideas for the
vIgGeN
vIgGeN7 said:
This is for the A95X 2gb 16gb s905 ONLY // WIFI - BCM4335
After searching for hours I came across this forum with a link to the firmware.
I know this box may not be used anymore but I hope it helps anyone else and saves them sometime. I used USB_Burning_Tool_v2. Remove Chinese symbols.
https://mega.nz/#!vQUG0IzD!bJg1BAz8lT_UaU8TQCXZagxTotknG3zUfzp7uIyTwZg
Source Site : http://www.tvboxforum.com/archive/index.php?thread-1560-1.html
ADDED :: Still looking to find a way to upgrade past 5.1.1. if anyone has any ideas for the
vIgGeN
Click to expand...
Click to collapse
Much thanks for this OP. I was in bad need of stock firmware. My A95X currently has Android 6.0.1 but I've soft bricked it. Going to Android 5.1.1 will be a downgrade on my box, but my primary goal is a working box. Once again, thank you much for your resources and your work. If I run across an Android Marshmallow build for this box, and if you still need to to upgrade, I'll post it here.
Is there anything available for the 1G/8G version?
I own the Bqeel 2019 Android 8.1 TV Box Y4 MAX / Amlogic S905X2 Quad Core / 4G DDR4+64G eMMC / Dual WIFI 2.4/5.8G + 100M LAN / tv box Bluetooth 4.0 / USB 3.0/ HDMI 2.1 /4K Smart TV Box .
I have tried many custom roms and none of them seem to work in the correct manner. I am able to use the latest USB burning tool but lot of these custom roms will flop on me after the install process. I feel like there is something usually wrong with the WIFI side. if it is not a wifi problem, then it is the remote control.
I have yet to find a custom rom where I can load and then use the device the way it is suppose to be. I want the remote to work correctly. Keep in mind that I do have a direct Ethernet connection for this device.
I have contacted the original manufacturer hoping that they can send me the original default firmware.
Back to the topic, i am interested in the best, the latest, and the one the works the most for this device. All solutions have failed for me thus far.
ps: i will re try the following .img files that I was able to obtain from FreakTabs
- XTM_ATV_X96_4_4 (this one will not connect to the internet directly. it needs a cell phone or tablet, so i can transfer over the Wifi and Google Account settings. For some reason, this is impossible because it keeps asking for my WIFI password which i have entered many times in the device);
- Poison_S905x2_V2.0 (this one is easy to install but after the install, the GUI seems stuck. I can't open up any apps, and the weather icon is always spinning).
Again, i have tried maybe 5 different custom roms from freaktabs (i am sure they are posted here) and none of them seem to work.
Hello , i have same issue here
i flashed many times with many roms and no one work properly.
Sometimes i have no wifi/ethernet or no remote.
please if someone have the stock firmware of Bqeel y4 max 905x2 4/64go
Post it!!
really sorry for my english
alilous1000rr said:
Hello , i have same issue here
i flashed many times with many roms and no one work properly.
Sometimes i have no wifi/ethernet or no remote.
please if someone have the stock firmware of Bqeel y4 max 905x2 4/64go
Post it!!
really sorry for my english
Click to expand...
Click to collapse
I have the same problem.
I have tried many custom roms but nothing seems to work. Wifi and Bluetooth issues is a problem.
I too need STOCK firmware. I have extra device that is not been messed around with but i do not know how to make back up from stock rom. If i can make stock up rom with one app, i will do it ASAP and perhaps share it.
Edit: So I am able to obtain a back up of the stock firmware via Twrp from my second device, but it is not compatible with the other Bqeel system. All i see is the Bqeel Boot Logo.
I am still able to boot into recovery, and i can also install other custom roms (those custom roms stink).
I still need the orgiinal stock firmware in .img or i need a custom rom that actually works really great.
For those who want to purchase this device, you can but do not mess with custom roms. Just remove default apps and enjoy the default OS.
I contact the seller of my box (bqeel y4 max 4/64go) today
he gonna send me the stock firmware Asap.
I 'll share it when i 'll recieve it.
Thanks
alilous1000rr said:
I contact the seller of my box (bqeel y4 max 4/64go) today
he gonna send me the stock firmware Asap.
I 'll share it when i 'll recieve it.
Thanks
Click to expand...
Click to collapse
I did the same thing. They sent me the stock firmware. the device works great now! there is another hiccup though. For usb burning tool, you will need some license files. when you load the .img file in the program, it will not accept it. You need the license files (just transfer them in the directory in usb burning tool)
here is the link for license files and stock firmware.
https://mega.nz/#F!TvoShAAK!Jd0X15aoHWVdOf1rrYPc0g
I tried that firmware in my box and it freezes on logo!!!
any news for this device? I have tried many custom OS but none work due to missing drivers.
LooseEnd85 said:
I did the same thing. They sent me the stock firmware. the device works great now! there is another
Click to expand...
Click to collapse
What did you actually wrote into the message? I'm in touch with them since a few days but I cannot go over than "we can replace the unit"!
BTW, my Device Build Fingerprints: Amlogic/u211/u211:8.1.0/OPM1.171019.011/20190402:user/release-keys
Bqeel 2019 Android 9.0 TV Box Y4 MAX / Amlogic S905X2 Quad Core / 4G DDR4+64G eMMC / Dual WIFI 2.4/5.8G + 100M LAN / tv box Bluetooth 4.0 / USB 3.0/ HDMI 2.1 /4K UHD Smart TV Box
Yes... it should have android v9 but it's a v8.1... I found the error when the Amazon return window was already closed...
https://www.bqeel.net/download.html
There are firmwares from bqueel
Hi
Can somebody now tell me if firmware from bqeel.net works or not becuse I've seen a loot that say it's stuck at logo screen or it won't boot
Does it work or no?
so far the best custom ATV ported ROM I've found for this box is here: https://forum.freaktab.com/forum/tv...ionatv__bqeel_u214-y8_max_1000m_s905x3-test57
it is due for an update but works as is. I also have a SlimBox ROM that works for the Bqeel but I'll have to upload that to my Mega folder and share the link.
EDIT: nevermind my boxi s the Y8 Max this is asking for the Y4 Max,.
Hey All
Stumbled across this site
https://www.evolutiontv-vs.com/uncategorized/
https://www.evolutiontv-vs.com/uncategorized/блог-системных-файлов.html
In their firmware section i noticed they had a AOSP android 10 listed for s912 devices and figured i would give it a shot.
Its basically a Linage OS android 10.
SO far things seem to be working fine. I have it running on my Alfawise H96 Pro +.
Direct link to firmware here https://mega.nz/file/fIcBXCBY#RTtLXh1zBKsS6YQbmQI_OkAdnaEghhxOrK5MvDeqG2M
Anyone else tried this ?
Yeah I have tried it last year, I still prefer ATV, waiting since then for someone to port AOSP to ATV
tried this with my H96 Pro+ Firmware CZ-S32-v2.2 (DDR3)...
too barebones for my taste... also i dunno which gapps to flash for this so i cant install anything without sideloading (i tried mindthegapps 10 which is what is usually prescribed for LoS)
hopefully it could be used as a base for new development on our devices going forward...
Hello i need custom rom's for my device, i was installed (1.+[v8]+Aidan's+ROM+[s905x2]+(u211+&+u214)+(H96Max_X2)+FB-Cruz+Enrique+García (1) on my device SDOTT0202 / DV8519. Wifi scan available networks, but can't connect, also chromecast built in not working. This is info for my device.
SoCAmlogic S905X2
CPUQuad-core 1.8 GHz (ARM Cortex-A53)
GPUARM Mali-G31 MP2
RAM2GB
Storage8GB
What wifi chip does it have?
Hi, I will sent you a letter.
@kalehrl@galaxy94
Hi, if it helps to make firmware image I have make a dump of SDOTT0202 / DV8519 following files using Amlogic dump utility.
Pics in attach.
I think you can make the img file using the same amlogic kitchen. It's called something like dump2img but I'm not sure it will boot because the firmware is Google certified
Y300-0100 said:
@kalehrl@galaxy94
Hi, if it helps to make firmware image I have make a dump of SDOTT0202 / DV8519 following files using Amlogic dump utility.
Pics in attach.
Click to expand...
Click to collapse
Can you share the files?
I can try to make an image out of those files using amlogic kitchen.
kalehrl said:
Can you share the files?
I can try to make an image out of those files using amlogic kitchen.
Click to expand...
Click to collapse
I just saw your reply. I will zip files and upload it later. Thx
Hi, I have a similar TV box and I have a problem after changing the firmware. Bluetooth and wireless card do not work. If anyone can share a working firmware I would be very grateful ...
My device model: SDOTT0202 / DV8519
SoC Amlogic S905X2
CPU: Quad-core 1.8 GHz (ARM Cortex-A53)
GPU: ARM Mali-G31 MP2
RAM: 2GB
Storage: 8GB
and I think Bt+WiFi: AP6398SV
I tried the Aidans ROM V8 firmware, works great, but no wifi and bt.
You need to find a ROM with working WiFi or make a TWRP backup of vendor partition of the original firmware and post it here.
danevrs said:
Hi, I have a similar TV box and I have a problem after changing the firmware. Bluetooth and wireless card do not work. If anyone can share a working firmware I would be very grateful ...
My device model: SDOTT0202 / DV8519
SoC Amlogic S905X2
CPU: Quad-core 1.8 GHz (ARM Cortex-A53)
GPU: ARM Mali-G31 MP2
RAM: 2GB
Storage: 8GB
and I think Bt+WiFi: AP6398SV
I tried the Aidans ROM V8 firmware, works great, but no wifi and bt.
Click to expand...
Click to collapse
Is there something in particular that you didn't like about the stock firmware?
If the eon tv app auto launching was bothering you, the sdmc app(s) that force this can be disabled, which turns the device into stock android tv. Or, perhaps you couldn't get past the code screen at first bootup?
goapy said:
If the eon tv app auto launching was bothering you, for sdmc devices, they typically use two apps to force the auto launchin
Click to expand...
Click to collapse
One ott provider in my country using basically the same sdmc box but with a different WiFi chip does a nasty thing when your contract expires. If you reset the box after the contract expiration, the box is completely useless. When it boots, you are left with an info screen with the serial number of the box and a number to call. And you can't get past it.
Hello! I have SDOTT0202 device and I did something stipid - I did a factory reset.
Now, each time when I turn on the device - it tries to setup EON and I can't exit from EON Activation Screen and I can't use my device.
How could I restart it in recovery mode? I tryed with simultaneosly pressing power button and volum down button and while keep pressing them - turn on the electricity, but this doesn't work for me
Please help me to bypass this screen and to use my device for another applications.
Same here, I have the eon box and installed Adrian's custom rom, but the WIFI is not working and for the bluetooth - it is not working properly.
Does anyone have a rom that can be used for the eon box, with working WIFI and bluetooth?
@assenstef, can you make a copy of the original eon box rom and share it with us? Do you keep a backup copy?
gobara90 said:
Same here, I have the eon box and installed Adrian's custom rom, but the WIFI is not working and for the bluetooth - it is not working properly.
Does anyone have a rom that can be used for the eon box, with working WIFI and bluetooth?
@assenstef, can you make a copy of the original eon box rom and share it with us? Do you keep a backup copy?
Click to expand...
Click to collapse
What rom from Aidan u use?
gobara90 said:
Same here, I have the eon box and installed Adrian's custom rom, but the WIFI is not working and for the bluetooth - it is not working properly.
Click to expand...
Click to collapse
The wifi+bt combo module in the eon version (as pictured above in post #8) is the ap6398s, which uses the broadcom bcm4359.
I have original firmware for a bunch of dv8519 and dv8535 devices, but I wouldn't suggest anyone flash any of them before verifying that the device tree and bootloader match. In order to do this, you'd have to dump at least the bootloader and the device tree blob from your device before you overwrite it with anything else.
There are at least 2 slightly different versions of the EON box.
The one from Serbia has AP6356 but the one from Bulgaria has a different one.
Slimbox works fine with wifi on the Serbian version but not on the Bulgarian one.
I asked a user from Bulgaria to open his box and check the wifi module but there was no follow-up from him.
I have original fw dump from the Serbian version.
kalehrl said:
There are at least 2 slightly different versions of the EON box.
The one from Serbia has AP6356 but the one from Bulgaria has a different one.
Slimbox works fine with wifi on the Serbian version but not on the Bulgarian one.
I asked a user from Bulgaria to open his box and check the wifi module but there was no follow-up from him.
I have original fw dump from the Serbian version.
Click to expand...
Click to collapse
Hi I have BG version.Its with AP6398SV wi-fi module.
What rom can flash on this box?
vladakru said:
What rom can flash on this box?
Click to expand...
Click to collapse
Specifically, which device do you have and which wi-fi module does it have?
If you haven't overwritten the original firmware on the device yet, make a backup first using the AML Dump tool as shown in post #4 of this thread.
Яндекс
Найдётся всё
disk.yandex.ru
But your WiFi probably won't work. You will also lose Chromecast and widevine L1.