I'm trying to install Magisk because the poco x3 GT has arrived and I was able to unlock it.
After fastbooting the img file created by Magisk, it becomes a boot loop.
I've succeeded with the same procedure on Mi9, so I don't think it's wrong, but if I try again, the result is the same.
MIUI is not 12.5.2.
If anyone has succeeded, please give me some advice.
I wish someone could make a trwp for chopin
I can root with this boot. My MIUI version is China development version 21.8.13. The new MIUI version may not be valid. You can try it
boot.img
红豆生南瓜 said:
I can root with this boot. My MIUI version is China development version 21.8.13. The new MIUI version may not be valid. You can try it
boot.img
Click to expand...
Click to collapse
Thank you very much.
I'm using the global version 12.5.2, but I'll give it a try.
You may also need this file
Tommy SUDA said:
Thank you very much.
I'm using the global version 12.5.2, but I'll give it a try.
Click to expand...
Click to collapse
红豆生南瓜 said:
I can root with this boot. My MIUI version is China development version 21.8.13. The new MIUI version may not be valid. You can try it
boot.img
Click to expand...
Click to collapse
I tried to burn the boot.img file with the fastboot flash recovery command, but it didn't work.
Tommy SUDA said:
I tried to burn the boot.img file with the fastboot flash recovery command, but it didn't work.
Click to expand...
Click to collapse
first,fastboot boot.img, then,fastboot vbmeta.img. Refer to poco m3 pro's method
Of course, it may also be caused by different versions of MIUI system
红豆生南瓜 said:
first,fastboot boot.img, then,fastboot vbmeta.img. Refer to poco m3 pro's method
Of course, it may also be caused by different versions of MIUI system
Click to expand...
Click to collapse
can you do like this to global 12.5.5.0 please here the link https://drive.winten.tk/2:/Data/boot_12.5.5.0_global.img
AnyZ5 said:
can you do like this to global 12.5.5.0 please here the link https://drive.winten.tk/2:/Data/boot_12.5.5.0_global.img
Click to expand...
Click to collapse
thanks,I'll try it
AnyZ5 said:
can you do like this to global 12.5.5.0 please here the link https://drive.winten.tk/2:/Data/boot_12.5.5.0_global.img
Click to expand...
Click to collapse
I confirmed the poco m3 pro's method.
One thing to check, do you patch this boot file with magisk and then fastboot? Or can it be used as it is?
AnyZ5 said:
can you do like this to global 12.5.5.0 please here the link https://drive.winten.tk/2:/Data/boot_12.5.5.0_global.img
Click to expand...
Click to collapse
The global version of boot.img supporting magisk has been made in China, but he has to pay. I can't get it, sorry
AnyZ5 said:
can you do like this to global 12.5.5.0 please here the link https://drive.winten.tk/2:/Data/boot_12.5.5.0_global.img
Click to expand...
Click to collapse
This is the Chinese version of one click root tool. I hope it will help you.
Applicable to MIUI versions before August
红豆生南瓜 said:
This is the Chinese version of one click root tool. I hope it will help you.
Applicable to MIUI versions before August
Click to expand...
Click to collapse
Thanks again ,I‘ll try it
Tommy SUDA said:
thanks,I'll try it
Click to expand...
Click to collapse
it's stock not patched magisk yet
红豆生南瓜 said:
This is the Chinese version of one click root tool. I hope it will help you.
Applicable to MIUI versions before August
Click to expand...
Click to collapse
I unzipped the one-click tool, but I don't know how to use it. Can you tell me
Tommy SUDA said:
I unzipped the one-click tool, but I don't know how to use it. Can you tell me
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Connect the phone to the computer in FastBoot mode, run the bat file, and then select serial number 9，flash boot and vbmeta
红豆生南瓜 said:
View attachment 5405045
Connect the phone to the computer in FastBoot mode, run the bat file, and then select serial number 9，flash boot and vbmeta
Click to expand...
Click to collapse
I connected poco to a PC in fastboot mode, executed a batch file, and entered the number 9 from the menu screen, but the screen closes and exits. If anyone has any problems, please let me know.
Tommy SUDA said:
I connected poco to a PC in fastboot mode, executed a batch file, and entered the number 9 from the menu screen, but the screen closes and exits. If anyone has any problems, please let me know.
Click to expand...
Click to collapse
Maybe it's a driver problem. I'm not sure. This is another tool you can try.
红豆生南瓜 said:
Maybe it's a driver problem. I'm not sure. This is another tool you can try.
Click to expand...
Click to collapse
I was able to successfully root with this tool. I'm really thankful to you.
Related
by wzsx150. The default is Chinese. English language can be set up.
https://www.lanzous.com/i39m37e
That was pretty fast!
qianjie said:
by wzsx150. The default is Chinese. English language can be set up.
https://www.lanzous.com/i39m37e
Click to expand...
Click to collapse
Amazingly quick!
I get my Mi 9 on Monday. Would flashing magisk via twrp work at stage, or would we need to await a specific root method?
Awesome. Can't wait for my phone to arrive.
cd993 said:
Amazingly quick!
I get my Mi 9 on Monday. Would flashing magisk via twrp work at stage, or would we need to await a specific root method?
Click to expand...
Click to collapse
https://raw.githubusercontent.com/t...uilds/release.json?tdsourcetag=s_pctim_aiomsg
this magisk version can be used
qianjie said:
https://raw.githubusercontent.com/t...uilds/release.json?tdsourcetag=s_pctim_aiomsg
this magisk version can be used
Click to expand...
Click to collapse
Great thanks, looking forward to seeing how people get on with this.
Did anyone flashed it yet?
Yes but it not works 100%, its start recovery mode, you can change landuage nut if you want to flash its impossible as you cant see correct folder and files tree
Laserek_Poland said:
Yes but it not works 100%, its start recovery mode, you can change landuage nut if you want to flash its impossible as you cant see correct folder and files tree
Click to expand...
Click to collapse
I think your data encrypted.
Laserek_Poland said:
Yes but it not works 100%, its start recovery mode, you can change landuage nut if you want to flash its impossible as you cant see correct folder and files tree
Click to expand...
Click to collapse
Can you test my eXtreme Kernel?
xdamami said:
I think your data encrypted.
Click to expand...
Click to collapse
Beside after rebbot to system its back to stock recovery
能否解密date分区
Laserek_Poland said:
Beside after rebbot to system its back to stock recovery
Click to expand...
Click to collapse
Well, without flashing a custom rom, the stock rom will restore the stock recovery.
Anyway, TWRP will be more useful whenever custom roms are available. I have bootloader unlocked, but not in hurry to flash TWRP recovery.
qianjie said:
by wzsx150. The default is Chinese. English language can be set up.
https://www.lanzous.com/i39m37e
Click to expand...
Click to collapse
The Development Section is not for sharing the work of others but posting your own work. Please be sure to read the sticky linked below before posting in the development section:
A message from the moderators - All users please read
THREAD MOVED
Doesn't work. Sets the device name to "xiaomi9" but should be "cepheus", so flashing aborts because of wrong device name.
merlin699 said:
Doesn't work. Sets the device name to "xiaomi9" but should be "cepheus", so flashing aborts because of wrong device name.
Click to expand...
Click to collapse
Change the updater script in the EU rom zip file from "cepheus" to "xiaomi9" and voila, it works.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my MI 9 using Tapatalk
ted presley said:
Change the updater script in the EU rom zip file from "cepheus" to "xiaomi9" and voila, it works. View attachment 4724159
Sent from my MI 9 using Tapatalk
Click to expand...
Click to collapse
Thanks for that, actually I was thinking of something like this. But it would be great if the Recovery could be corrected to the correct device name.
merlin699 said:
Thanks for that, actually I was thinking of something like this. But it would be great if the Recovery could be corrected to the correct device name.
Click to expand...
Click to collapse
That's Xiaomi's fault, just flash EU rom once, the device name will change to "Cepheus" and next EU rom has no problem with that.
ted presley said:
That's Xiaomi's fault, just flash EU rom once, the device name will change to "Cepheus" and next EU rom has no problem with that.
Click to expand...
Click to collapse
cool thank you.
merlin699 said:
cool thank you.
Click to expand...
Click to collapse
But, just my theory, need to test....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download Recovery : http://bigota.d.miui.com/V10.2.12.0...AGlobal_V10.2.12.0.PFAEUXM_57ad5f1d24_9.0.zip
Fastboot : http://bigota.d.miui.com/V10.2.12.0...AEUXM_20190226.0000.00_9.0_eea_1c4053f6f6.tgz
Detail: https://forum.miuiturkiye.net/konu/...v10-2-12-0-fastboot-indirme-baglantisi.41190/
If I have mi 9 Chinese version and I unlock bootloader, Can I simply install this version on MiFlash?
can anyone test flashing this from china rom will enable widevine l1?
Quyta said:
If I have mi 9 Chinese version and I unlock bootloader, Can I simply install this version on MiFlash?
Click to expand...
Click to collapse
you need to install twrp and wipe userdata first, I just installed it on my mi9 and work fine
By.TRabZonLu™ said:
Download Recovery : http://bigota.d.miui.com/V10.2.12.0...AGlobal_V10.2.12.0.PFAEUXM_57ad5f1d24_9.0.zip
Fastboot : http://bigota.d.miui.com/V10.2.12.0...AEUXM_20190226.0000.00_9.0_eea_1c4053f6f6.tgz
Detail: https://forum.miuiturkiye.net/konu/...v10-2-12-0-fastboot-indirme-baglantisi.41190/
Click to expand...
Click to collapse
The Development Section is not for sharing the work of others but posting your own work. Please be sure to read the sticky linked below before posting in the development section:
A message from the moderators - All users please read
THREAD MOVED
desirelll said:
you need to install twrp and wipe userdata first, I just installed it on my mi9 and work fine
Click to expand...
Click to collapse
Is twrp available?
Where did you get TWRP? Can anyone please guide on how to install on unlocked bootloader?
yup can someone share how to flash to global rom from china rom? I have unlocked the phone but stuck to flash to global rom
I have a problem with the Global Miui 10.2.12.0. When i switch to the DarkMode, the phone go always arbitrarily back to the normal Mode. I dont know why? Anybody have this problem?
MYAbln said:
I have a problem with the Global Miui 10.2.12.0. When i switch to the DarkMode, the phone go always arbitrarily back to the normal Mode. I dont know why? Anybody have this problem?
Click to expand...
Click to collapse
Yep. Mine to
Sent from my MI 9 using Tapatalk
By.TRabZonLu[emoji769 said:
;79022022]
Download Recovery : http://bigota.d.miui.com/V10.2.12.0...AGlobal_V10.2.12.0.PFAEUXM_57ad5f1d24_9.0.zip
Fastboot : http://bigota.d.miui.com/V10.2.12.0...AEUXM_20190226.0000.00_9.0_eea_1c4053f6f6.tgz
Detail: https://forum.miuiturkiye.net/konu/...v10-2-12-0-fastboot-indirme-baglantisi.41190/
Click to expand...
Click to collapse
Thanks
Quyta said:
If I have mi 9 Chinese version and I unlock bootloader, Can I simply install this version on MiFlash?
Click to expand...
Click to collapse
tell me how to unlock bootloader
jernhwang said:
tell me how to unlock bootloader
Click to expand...
Click to collapse
https://www.xiaomigeek.com/unlock-bootloader-xiaomi-devices-mi-flash-tool.html
Here is a tutorial
Changelog preview for MIUI 9.3.21 http://en.miui.com/thread-6075279-1-1.html
Unfortunately no fix for the design flaw in notification bar yet, my biggest annoyance with this phone rn
Edit: Supposedly it got fixed in this build!
Hi, is it works with MI 9 8GB?
desirelll said:
you need to install twrp and wipe userdata first, I just installed it on my mi9 and work fine
Click to expand...
Click to collapse
But how about 8GB version?
fp1707 said:
But how about 8GB version?
Click to expand...
Click to collapse
I have the Mi 9 8G version from China with the stable 10.2.16 China rom.
Unlock the bootloader after 360 hours and flash with Miflash with Global stable 10.2.3.
Now trying to figure how to have a permanent TWRP with decrpt data.
screwtop said:
I have the Mi 9 8G version from China with the stable 10.2.16 China rom.
Unlock the bootloader after 360 hours and flash with Miflash with Global stable 10.2.3.
Now trying to figure how to have a permanent TWRP with decrpt data.
Click to expand...
Click to collapse
Ahh thanks for letting me know that global works. I chose Xiaomi.eu.
For me TWRP stayed since the first time I flashed it. Only had to format data once just the first time using it. Since then it's been working fine. Even with finger print and stuff enabled
Sent from my Xiaomi MI 9 using XDA Labs
Hi. BTW, which Magisk version have you installed? Now my TWRP is permanent but not able to get Magisk running, both V18.1 and 19 causing bootloop.
Will be trying V18.
Hope it work.
Update:
Fail to install Magisk from v18 to 19.
When flash v16., reboot to bootloader, cannot boot to Recovery, required to flash by Miflash again to get phone working.
Follow the other thread of flashing rom + magisk = no Magisk after bootup.
Not sure where I go wrong.
I am sorry if I am in the wrong thread.
As of now, are there any tools or methods?
Which can unlockbootloader & install Twrp and root nokia c1 TA-1165 ?
I didn't find a method at all. There are only methods of other Nokia devices
Who can give me some suggestions?
@surathus
Road map:
1. Check for a TWRP matching your low-end phone
If found
2. Check both USB debugging and OEM unlocking are offered
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If both features are offered
3. Download & install USB-driver matching your phone from OEM's website
If installed
4. Download TWRP matching your phone
5. Unlock phone's boot-loader by means of Fastboot
6. Flash Magisk
7. Root phone by means of Magisk
8. Flash TWRP
fastboot oem unlock or fastboot flashing unlock
The suggested method, I tried it all,did not work with nokia c1
surathus said:
The suggested method, I tried it all,did not work with nokia c1
Click to expand...
Click to collapse
Last case is to flip the lock bit in SP/devcfg partition then flash it back to the device
TheExploitedOne said:
Last case is to flip the lock bit in SP/devcfg partition then flash it back to the device
Click to expand...
Click to collapse
how to the steps by steps to flip the lock bit in SP/devcfg partition
Can you guidelines me..
surathus said:
how to the steps by steps to flip the lock bit in SP/devcfg partition
Can you guidelines me..
Click to expand...
Click to collapse
I can't help via PM, but you'll need root access and if not you'll need a stock firmware and access to an EDL programmer at least one that works for your device.
TheExploitedOne said:
I can't help via PM, but you'll need root access and if not you'll need a stock firmware and access to an EDL programmer at least one that works for your device.
Click to expand...
Click to collapse
Thank you brothers
surathus said:
Thank you brothers
Click to expand...
Click to collapse
Absolutely good sir!
I meant to say can help btw
I have a bunch of programmers which may be able to work for you as well as tools to make the EDL restore tool but you'll need your firmware to restore to it
TheExploitedOne said:
Absolutely good sir!
I meant to say can help btw
I have a bunch of programmers which may be able to work for you as well as tools to make the EDL restore tool but you'll need your firmware to restore to it
Click to expand...
Click to collapse
I am new to the nokia c1 TA-1165 but I have the firmware that I just downloaded. And still don't know how to Flash and don't know which tools to use
This Stock Firmware Link
https://drive.google.com/uc?id=1RlCAlCGXvidTRoA6Zms4vaKCLb0QlXA3&export=download
surathus said:
I am new to the nokia c1 TA-1165 but I have the firmware that I just downloaded. And still don't know how to Flash and don't know which tools to use
This Stock Firmware Link
https://drive.google.com/uc?id=1RlCAlCGXvidTRoA6Zms4vaKCLb0QlXA3&export=download
Click to expand...
Click to collapse
If your able to use a homemade EDL cable (can be found on YouTube) or are able to use test points I can gladly give you a link to the tools I have
TheExploitedOne said:
If your able to use a homemade EDL cable (can be found on YouTube) or are able to use test points I can gladly give you a link to the tools I have
Click to expand...
Click to collapse
I have never used a homemade EDL cable but I think I can find it. If there are methods and Flash tools
surathus said:
I have never used a homemade EDL cable but I think I can find it. If there are methods and Flash tools
Click to expand...
Click to collapse
It's actually really easy to make with a stock Android cable ?
https://mega.nz/file/rc8CVIiB#qnM3_ZzrvCJtp_M7Y9ZftZqDtGgWeN0tqFrLlT30pws
Here's a link to all the tools you'll need. It's 240MB I size if applicable (EDL tools)
TheExploitedOne said:
It's actually really easy to make with a stock Android cable
https://mega.nz/file/rc8CVIiB#qnM3_ZzrvCJtp_M7Y9ZftZqDtGgWeN0tqFrLlT30pws
Here's a link to all the tools you'll need. It's 240MB I size if applicable (EDL tools)
Click to expand...
Click to collapse
Thank you brother
surathus said:
And what tool do I need to use Flash nokia c1 ta-1165
Please recommend
Click to expand...
Click to collapse
Everything you need is in the file I provided good sir
TheExploitedOne said:
Everything you need is in the file I provided good sir
Click to expand...
Click to collapse
Right now I have purchased an EDL cable and the product hasn't arrived yet.
But i have a problem with flash rom nokia c1 TA-1165
Because I don't know how to use Flash.Or any method Please download the firmware to see. And help to bring my method too
This Link
https://drive.google.com/uc?id=1RlCAlCGXvidTRoA6Zms4vaKCLb0QlXA3&export=download
surathus said:
Right now I have purchased an EDL cable and the product hasn't arrived yet.
But i have a problem with flash rom nokia c1 TA-1165
Because I don't know how to use Flash.Or any method Please download the firmware to see. And help to bring my method too
This Link
https://drive.google.com/uc?id=1RlCAlCGXvidTRoA6Zms4vaKCLb0QlXA3&export=download
Click to expand...
Click to collapse
Will do!
TheExploitedOne said:
Will do!
Click to expand...
Click to collapse
Thank you brothers
I am not able to open fastboot mode there is no fastboot mode available and showing this error in OnePlus Nord 2 5g
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Try this guide:
I had the same problem and managed to fix it with this.www.youtube.com/watch?v=eW5HfYmkacE&list=LL&index=3&ab_channel=4UTech
Seen this video if you understand then make a detail video on YouTube please
rajgamer773 said:
Seen this video if you understand then make a detail video on YouTube please
Click to expand...
Click to collapse
What he did was flashback stock LK.bin
[email protected] said:
View attachment 5641743
Click to expand...
Click to collapse
Did you try any of the below mentioned methods and got the fastboot workiing.. I am also facing the same issue
ghost9685 said:
Did you try any of the below mentioned methods and got the fastboot workiing.. I am also facing the same issue
Click to expand...
Click to collapse
There's nothing needed to be fixed, you're in fastboot. The message can be ignored
ko_hi said:
There's nothing needed to be fixed, you're in fastboot. The message can be ignored
Click to expand...
Click to collapse
I am not able to boot to the fast boot, i am getting the same error which is mentioned by
[email protected] in the above post
ghost9685 said:
I am not able to boot to the fast boot, i am getting the same error which is mentioned by
[email protected] in the above post
Click to expand...
Click to collapse
Apparently that's fastboot i had same message
But
Fastboot_unlock_verify said ok
ko_hi said:
Apparently that's fastboot i had same message
But
Fastboot_unlock_verify said ok
Click to expand...
Click to collapse
aah okay.. unfortunately.. it didnt work for me.. I followed the video tutorial posted by
Yamuk17 from Tech 4 U and made it work.. although i had to do a lot of things
ghost9685 said:
aah okay.. unfortunately.. it didnt work for me.. I followed the video tutorial posted by
Yamuk17 from Tech 4 U and made it work.. although i had to do a lot of things
Click to expand...
Click to collapse
glad to hear
ghost9685 said:
aah okay.. unfortunately.. it didnt work for me.. I followed the video tutorial posted by
Yamuk17 from Tech 4 U and made it work.. although i had to do a lot of things
Click to expand...
Click to collapse
I am having the exact same Issue. Could you please tell me what you did to fix it?
Guys, what do you mean when considering the first video as solution? he just downgrades from 12 to 11. This is not a solution. We need a solution for android 12 we don't want to downgrade to android 11.
Am I missing something?
Yeap , this need a really performant and interested developper to do it . But it seems there isn't ... Recently I updated stock C10 to C11 and all commands are there ... BROM mode , recovery , fastboot but apparently they are triggered by something . Personally I don't understand this way to hide those but for me isn't a impediment , I don't want to root or install TWRP . There are important astral signs that will be in a few months A13 for OnePlus Nord 2 , so for now I'm feeling good
leopseft said:
Guys, what do you mean when considering the first video as solution? he just downgrades from 12 to 11. This is not a solution. We need a solution for android 12 we don't want to downgrade to android 11.
Am I missing something?
Click to expand...
Click to collapse
Unfortunately, only this solution helped me, my phone was not booting to fastboot in adroid 12, i had to downgrade to 11 and then enter fast boot to unlock BL and then install TWRP and Custom ROM
Vitacal said:
I am having the exact same Issue. Could you please tell me what you did to fix it?
Click to expand...
Click to collapse
ya you will have to follow the tutorial what is posted in the OP, there is a youtube link. I followed it but in the Customer made xubuntu flash drive the MTK tool was not working, so i created a Ubuntu bootable USB disk and then booted it installed all the necessary files for MTK tool from the Github page and i flashed the Android 11 to my phone then i was able to boot into Fastboot mode.
In realme 7 and android 12
I managed to get into fastboot mode using the following command:
adb shell reboot fastboot
leopseft said:
In realme 7 and android 12
I managed to get into fastboot mode using the following command:
adb shell reboot fastboot
Click to expand...
Click to collapse
Tried on my Oppo Reno2 Z, the phone will simply reboot, no fastboot.
My poco f1 its boot looping, it stick with the logo of poco and dont move to miui, had the stock miui rom of course bootloader unlocked. i can fastboot boot to twrp 3.6.2 then i flashed twrp without the issue, at twrp i can look what i got in the internal memory, at first i thought my miui corrupted, so decided to start fresh and flash miui eu last stable version, of course had to format, then wipe, when i flashed the rom no issue or error, but then after reboot still the same boot loop, tried to go to recovery and sometimes its hit or miss.
In the end the phone its not working fatsboot works completely but booting to system its not, and booting recovery works when its connected to the pc
Seriously dont know what to do
eilegz said:
My poco f1 its boot looping, it stick with the logo of poco and dont move to miui, had the stock miui rom of course bootloader unlocked. i can fastboot boot to twrp 3.6.2 then i flashed twrp without the issue, at twrp i can look what i got in the internal memory, at first i thought my miui corrupted, so decided to start fresh and flash miui eu last stable version, of course had to format, then wipe, when i flashed the rom no issue or error, but then after reboot still the same boot loop, tried to go to recovery and sometimes its hit or miss.
In the end the phone its not working fatsboot works completely but booting to system its not, and booting recovery works when its connected to the pc
Seriously dont know what to do
Click to expand...
Click to collapse
Try this tool
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
im going to check it, but does that relock my bootloader?
eilegz said:
im going to check it, but does that relock my bootloader?
Click to expand...
Click to collapse
Only if you check the clean all and lock box which is set by default.
some issues when i open the miflash tool and phone its not detected
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
eilegz said:
some issues when i open the miflash tool and phone its not detected
Click to expand...
Click to collapse
Just create an empty file named [email protected] in the log folder
try a version of miflash corresponding to the year of your phone.
was flashing until this
eilegz said:
was flashing until this
Click to expand...
Click to collapse
try a version of miflash corresponding to the year of your phone or don't use Miflash, open the folder of the tgz file you extracted and use the Bat file"flash-all".
ok after following this advice
to deal with that error it flashed without issue
But sadly the same as before poco logo boot loop
eilegz said:
But sadly the same as before poco logo boot loop
Click to expand...
Click to collapse
You haven't flashed anything because you must have an error at the end of the flash since you don't lock the bootloader.
Again,try a version of miflash corresponding to the year of your phone or don't use Miflash, open the folder of the tgz file you extracted and use the Bat file"flash-all"
tried the flash_all.bat but this appear
eilegz said:
tried the flash_all.bat but this appearView attachment 5712217
Click to expand...
Click to collapse
Which rom did you try to flash?
NOSS8 said:
Which rom did you try to flash?
Click to expand...
Click to collapse
downloaded this one https://xiaomifirmwareupdater.com/miui/beryllium/
eilegz said:
downloaded this one https://xiaomifirmwareupdater.com/firmware/beryllium/
Click to expand...
Click to collapse
These are firmware not full roms.
Download here a fastboot rom TGZ
https://xiaomifirmwareupdater.com/miui/beryllium/
NOSS8 said:
These are firmware not full roms.
Download here a fastboot rom TGZ
https://xiaomifirmwareupdater.com/miui/beryllium/
Click to expand...
Click to collapse
im mistaken the link but it was the full one had to extract the tgz then the tar and that get me the folder with the rom
eilegz said:
im mistaken the link but it was the full one had to extract the tgz then the tar and that get me the folder with the rom
Click to expand...
Click to collapse
try a version of miflash corresponding to the year of your phone.(older version).
NOSS8 said:
try a version of miflash corresponding to the year of your phone.(older version).
Click to expand...
Click to collapse
going to try this one https://xiaomiflashtool.com/download/xiaomi-flash-tool-20181115 since poco f1 released on august 2018
FInished flashing using the old mi flash still same issue poco logo boot loop
eilegz said:
FInished flashing using the old mi flash still same issue poco logo boot loop
Click to expand...
Click to collapse
Same https://forum.xda-developers.com/t/recovery-dont-stick-can-fastboot.4493095/post-87439937
Post the Miflash log +or- 20/25ko
NOSS8 said:
Same https://forum.xda-developers.com/t/recovery-dont-stick-can-fastboot.4493095/post-87439937
Post the Miflash log +or- 20/25ko
Click to expand...
Click to collapse
fastboot and flash log right?