Hello i tried every version on TWRP to boot from and every time i saw black screen and no TWRP on my phone.
I tried to boot from OrangeFox img and everything worked fine. But when i boot from TWRP i get black screen. So how can i fix it?
Command i use for boot. (i do it on linux)
adb reboot bootloade
fastboot boot Android-ROM/twrp-3.2.1-0-vince.img
And yes i dont flash them but they dont work if you flash them either. i just need to find proof that it works atleast with boot.
Orangefox working and is based on twrp. Why you want use twrp
Related
No matter how I try to flash the TWRP recovery image to the recovery partition, TWRP gets replaced by the crappy stock recovery!! This is absolutely maddening!
Specifically, it seems that no matter what method to use to flash the TWRP recovery, it gets overriden by the stock loader when the phone reboots.
My bootloader is UNLOCKED and I've installed a custom rom just fine by using the command fastboot boot twrp.img to boot into the twrp image. This is the only way I'm able to use TWRP at all.
I've tried:
fastboot flash recovery twrp.img
Booting into TWRP, and flashing the image over the recovery partition
Flashify to flash the TWRP over the recovery partition from within the rom
Trying to flash cyangenmod's recovery from within the rom (was pretty desperate at this point..)
I've also tried many different versions of TWRP, I can boot into them just fine but none of them stick when I flash them to the recovery partition.
It always says it's successful when I try to flash it, I reboot into recovery, and it boots into the piece of crap EmUI stock recovery screen every time
Anyone have any pointers here? It's not the end of the world but it's pretty aggravating having a completely useless recovery if I'm not near a computer,.
Try using Flashify or Flashfire.
Sadly didn't work. It doesn't seem to matter how I flash the recovery, the bootloader replaces it with the stock recovery when it boots. I'll update the OP to clarify, but thank you
I am having same issue have you found a fix
Have you tried starting completely over? Like, downloading the official MM build (b331, C564D003) from Huawei (Assuming you're on L24)?
On the new, freshly installed ROM, make sure that USB Debugging is and enable OEM Unlock are on in the developer settings.
Then, try flashing this build of TWRP again.
Before rebooting, do a Cache/Dalvik Wipe.
Boot up into the stock rom, then use 'adb reboot recovery' to see what happens next. It should work...
Hi mate,
It'd be easier to help you if you could post a screenshot of your FASTBOOT screen. There will be a line that will say FRP=LOCKED/UNLOCKED something like this.
if it is locked,
you have to install stock rom & enable OEM unlock from setting.
Then relock the boot loader. Then again unlock the boot loader.
For myself, I unlocked my BL unofficially, & this problem occurred . I solved it this way...
Hope it helps.
Cheers!
Hello! This is my first thread on the forum;
I'm writing because I think I soft bricked my Xiaomi Mi Pad 4 LTE, let me explain from the very beginning.
It's a brand new device, bought today, and with a custom italian ROM which was sold with.
I just wanted to root it, and the bootloader was already unlocked because it was a custom ROM, so I tried to install TWRP (mocha version for Mi Pad) with Fastboot and then I wanted to install Magisk.
The issue is that, when I tried to flash TWRP to recovery with fastboot flash recovery twrp.img, it all went "OK" but then TWRP was not actually flashed and couldn't boot it with key combinations, it just looked like it wasn't there. I also tried to boot it without flashing, with fastboot boot twrp.img but it gave me
"Failed to load/authenticate boot image: 00000050" error
Looking on the web, I found someone who told to try fastboot flash boot twrp.img and so, without even thinking, I did it.
That's the main issue. I rebooted, and found that TWRP started, but now I couldn't boot my device anymore, because the default boot.img file was replaced by twrp.img. So, practically, TWRP replaced my device's default system (I think?).
Then, I tried to find a stock firmware for Mi Pad 4 (Clover) on the web, and I found it, so I flashed the stock firmware boot.img, fastboot flash boot boot.img, but when I rebooted, the device was stuck in the loading screen with three dots loading over a "Powered by Android" logo. I waited 20 minutes, nothing, it looks stuck, so this stock boot.img doesn't seem to work.
I can actually flash TWRP and that stock boot image both whenever I want and switch between them; the first works, the latter doesn't.
So, in poor words: I flashed twrp.img as boot.img and now I can't boot normally, but TWRP starts when turning on my device.
But I just want to get my default boot.img or system, or any other way to reaccess to my device. That's fine even if I have to hard reset or wipe everything, it's fine even if I am going to lose data, but please, just help me.
Can someone help me? I'm just a newbie in this world, please help me unbricking my device.
Thanks in advance.
Try installing twrp again and boot to it
Download custom rom.of your choice ( im using hovac and it been great for a year now )
Move it to your mipad via comouter
Format everything in twrp and install the rom and gapps
--- I just remembered havin same issue u having and if im not mistaking : u should reboot to recovery right after installing twrp ( you dont reboot to system )
Im not really sure about it cause it happened long time ago
@DanielVipx
Sorry, seems you tried that already. Did you try the mi flash tool?
This might help:
https://osdn.net/projects/xiaomifirmwareupdater/storage/Stable/V10/clover/
I made a mess, I really did. Was on Paranoid Q5 and wanted to try the CrDroid 7, so flashed DFE to decrypt the phone. However this made the phone stuck in fastboot. Don't really know if I misunderstood some instruction, or got hold of wrong file...
But here's the real problem - I cant install TWRP through the fastboot!
The Shell does report "sending, OKAY, writing, OKAY", but it wont reboot to TWRP either through ADB or manually.
Is this a common problem? Any help would be appreciated...
When I experienced something like that in the past, I used fastboot to directly boot to recovery, and then permanently flash twrp from inside this temporarily booted twrp. After flashing, reboot again to recovery and you are now ready to flash a new rom of your choice.
So you flashed dfe then rebooted but phone stuck in fastboot? Which dfe zip did you use?
It appears that DFE wiped all the partitions that's why even the recovery is not being flashed because partitions are not getting detected.
The easiest way to boot your phone is to flash stock ROM using flash tool to recreate the partitions. After that anything else can be done.
My TWRP was not loading (just a logo) and I forgot to root my device. I tried other versions and OrangeFox instead, and then "swipe to unlock" appeared, but touches are not working at all. Only side buttons are working.
*Everything works fine in MIUI
Twrp recovery works without root. That's why you can install magisc to root your phone using twrp. Try more twrp project and try to enter multiple times to recovery. I had the same problem and after 2-3 attempts it works. I'm using pitch black recovery And I recommend it with confidence
You can find this recovery here :
https://forum.xda-developers.com/t/...crypted_data-v2-9-0-base-twrp-v3-3-1.4000857/
As I tryed a loot of twrp project this was the most stable for me. Just flash it using fast boot. Or you can boot it Instead of flashing.
Code for boot : fastboot boot twrp.img
You can use this if you have problems on flashing the recovery.. So after you boot on it you can flash the zip file using twrp if it won't flash using your pc / cmd.
INFO:
If you want root and you got boot loop after flashing Magisk with TWRP(Phone stuck at boot process up to 2-3minutes ) boot twrp and format your DATA. DON'T WIPE! FORMAT!
**WIPE/FORMAT DATA**
*Restart your phone and be patient the boot may take some time after perform data format*
Now you should have the Magisk installed! (The data format does not wipe Magisk Manager from the system (!). It will be there.)
-------------
(!) If something goes wrong you can flash again the stock rom downloaded and repeat the process (!)
------------------
bootloader - unlocked
ROM - PE
i flashed derpfest ROM, but when I rebooted it, it went to fastboot. i was not able to boot into TWRP too. it just kept going to fastboot again and again. so I flashed stock ROM using mi flash tool (stock fastboot ROM). now I am able to access the mi recovery menu but there is no install from zip option, not able to boot into the system as it goes to fastboot while booting into the system. in short, now I have access to fastboot and limited access to the mi recovery menu.
i tried to flash custom recovery (TWRP and orange fox). it gets flashed but cannot boot into those recoveries and goes to fastboot again.
i tried to boot the custom recovery directly too with "fastboot boot twrp.img" it restarts but the recovery doesn't load.
does anyone know what to do now?
please tell me how to flash stock from or custom from anything will help.
------------------UPDATE---------------------------------
i am able to flash android 8.1 and run it but anything later then that reeboots to fastboot. cannot update from stock updater too. if i flash any firmware of PIE or later then it reeboots to fastboot.
rabin18181818 said:
bootloader - unlocked
ROM - PE
i flashed derpfest ROM, but when I rebooted it, it went to fastboot. i was not able to boot into TWRP too. it just kept going to fastboot again and again. so I flashed stock ROM using mi flash tool (stock fastboot ROM). now I am able to access the mi recovery menu but there is no install from zip option, not able to boot into the system as it goes to fastboot while booting into the system. in short, now I have access to fastboot and limited access to the mi recovery menu.
i tried to flash custom recovery (TWRP and orange fox). it gets flashed but cannot boot into those recoveries and goes to fastboot again.
i tried to boot the custom recovery directly too with "fastboot boot twrp.img" it restarts but the recovery doesn't load.
does anyone know what to do now?
please tell me how to flash stock from or custom from anything will help.
Click to expand...
Click to collapse
Hello,
Please take a look on my POCO F1 Ultimate Collection & Guides.
You will find everything you need.
Retrial said:
Hello,
Please take a look on my POCO F1 Ultimate Collection & Guides.
You will find everything you need.
Click to expand...
Click to collapse
nope nothing
rabin18181818 said:
nope nothing
Click to expand...
Click to collapse
Okey, check the guide clean install official stock rom(to unbrick ur device) and then follow the guide clean install custom rom.