Here are the stock deodexed roms for anyone that uses them. There are absolutely not changes at all except that it has been deodexed and zipaligned. There are no code changes or file tweaks at all.
The package is split into two parts, the first zip is the main zip that MUST be flashed. The second zip is all the bundleware that was removed, install if you want the bundleware back.
If there is a patch listed for a rom, it is recommended to install that after flashing the base rom.
You must use the normal pkg before installing, so for example if you want to use the stock 360 one you should update with the 360 pkg and THEN use this.
Requirements:
Clockwork Mod installed
Matching pkg flashed beforehand*
Instructions:
Prereqs: Update with the matching PKG
Copy latest base zip to sdcard
Copy latest patch zip to sdcard
Turn off device
Set vibrator slider to on/up
Press and hold Vol Down + Power Until menu appears
Select base zip from list and flash
Select patch zip from list and flash
Finished
Optional: Root your device
Available Roms:
325:
base v1 zip
removed files v1 zip
408:
base v1 zip
removed files v1 zip
So far so good.
TheManii said:
Here are the stock deodexed roms for anyone that uses them. There are absolutely not changes at all except that it has been deodexed and zipaligned. There are no code changes or file tweaks at all.
You must use the normal pkg before installing, so for example if you want to use the stock 408 one you should update with the 408 pkg and THEN use this. If you do not you will end up with a brick.
FAILURE TO FOLLOW DIRECTIONS WILL RESULT IN A BRICK: I simply cannot assist with troubleshooting the venue at the time being, DO NOT FLASH if you do not fully understand the process listed.
Click to expand...
Click to collapse
Just finished pushing the deoxed version to my phone, no issues so far.
I released CWM 5.5 now so these images will be taken down soon and converted into standard update zips.
The pre-rooted one will be completely removed as you can simply flash superuser.zip afterwards
the updates have been converted over to update zips and the old ones have been removed.
Their contents are identical though, if you had previously flashed the img version you do not need to reinstall the zip version.
325 has been added
can u make a versions with russian/ukrainian languages?
I will release a lang pack for 408 soon, I dont recall if ukranian is in it, russian is though
multi-language update v3 for 408 deodexed: http://hotfile.com/dl/143658861/6dc843c/update-Russian-for-DELL-Venue-408-v3.zip.html
Russian, Ukrainian, etc.
Translated:
- system UI
- settings
- calculator
- calendar
- galery
- phone
- contacts
- camera
- browser
- stk
- clock
- sms/mms
- music
Translations are still in work, so next updates will be later.
Can somebody explain to me, what's the difference between 325 and 408 ROMs?
---------- Post added at 03:16 PM ---------- Previous post was at 03:08 PM ----------
And also, as far, as I understood from the FAQ, I should install stock 408 ROM and then flash 408.zip?? If yes, where can I find stock 408 PKG?
325 - Android 2.2 - Froyo
408 - Android 2.3 - Gingerbread
And yes, u must flash at first rom, and then deodexed
TheManii said:
Here are the stock deodexed roms for anyone that uses them. There are absolutely not changes at all except that it has been deodexed and zipaligned. There are no code changes or file tweaks at all.
The package is split into two parts, the first zip is the main zip that MUST be flashed. The second zip is all the bundleware that was removed, install if you want the bundleware back.
If there is a patch listed for a rom, it is recommended to install that after flashing the base rom.
You must use the normal pkg before installing, so for example if you want to use the stock 360 one you should update with the 360 pkg and THEN use this.
Requirements:
Clockwork Mod installed
Matching pkg flashed beforehand*
Instructions:
Prereqs: Update with the matching PKG
Copy latest base zip to sdcard
Copy latest patch zip to sdcard
Turn off device
Set vibrator slider to on/up
Press and hold Vol Down + Power Until menu appears
Select base zip from list and flash
Select patch zip from list and flash
Finished
Optional: Root your device
Available Roms:
325:
base v1 zip
removed files v1 zip
408:
base v1 zip
removed files v1 zip
Click to expand...
Click to collapse
Thankyou Verymuch
I like this "DeodexedV408" Gingerbread Good FW
Hi,
The links below dont seem to be working. Is there an alternate mirror for the same.
Thanks.
TheManii said:
Here are the stock deodexed roms for anyone that uses them. There are absolutely not changes at all except that it has been deodexed and zipaligned. There are no code changes or file tweaks at all.
The package is split into two parts, the first zip is the main zip that MUST be flashed. The second zip is all the bundleware that was removed, install if you want the bundleware back.
If there is a patch listed for a rom, it is recommended to install that after flashing the base rom.
You must use the normal pkg before installing, so for example if you want to use the stock 360 one you should update with the 360 pkg and THEN use this.
Requirements:
Clockwork Mod installed
Matching pkg flashed beforehand*
Instructions:
Prereqs: Update with the matching PKG
Copy latest base zip to sdcard
Copy latest patch zip to sdcard
Turn off device
Set vibrator slider to on/up
Press and hold Vol Down + Power Until menu appears
Select base zip from list and flash
Select patch zip from list and flash
Finished
Optional: Root your device
Available Roms:
325:
base v1 zip
removed files v1 zip
408:
base v1 zip
removed files v1 zip
Click to expand...
Click to collapse
pkg file must be flashed 1st. So are you saying.
Install 408 recovery,
rename Thunder_408_20707_14.pkg to update.pkg
use 408 recovery to flash update.pkg
Then,
Install CWM
Use CWM to flash base v1 zip
then CWM to flash removed files v1 zip (assuming this is what is being called as latest patch)
Correct?
If you are not already on 408: yes, you should flash the 408 pkg.
If you are on it, you can skip the flashing of the update.pkg
Also yes on the actual install, you need to use a custom rec to flash the update.
The removed files are just that, they're files that I removed since they're not needed.
I simply made a seperate zip for anyone that actually wants it.
Links updated, be aware that I currently do not support them.
I wont be able to assist with any issues with them
May be someone have multi-language update v3 for 408 from post: https://forum.xda-developers.com/showthread.php?p=21793422
Re-upload please.
Hello all !
I'm not new in the custom ROM environment because I've already flashed my Xperia Arc with tons of differents ROM's. Of course I'm not a flashing expert and this is why I'm here today...
I have a new LG G2 and I would like to flash it with Mahdi Rom. This is what is already done :
- Rooted with IOroot25 -> all is OK because I checked with "Root Checker" and it says OK
- Install TWRP -> all is OK because I performed a backup of my current configuration with it
- Flash Mahdi Rom -> when I select the .zip to flash, I get a message :
- Unable to open mahdirom.zip
- Updating partitions...
I know there is a new problem with Android 4.4.2 about files permissions. So I installed "SD Fix" to solve this problem. I've also try to dowload another archive with the same result.
I have 2 questions now :
- How can I manage to successfully flash my device ?
- Is it normal that I can't directly transfert the .zip file to the internal memory ? I have to put the .zip into a directory and then transfert the directory.
Thank you for your help ! :good:
Sorry for the wrong categary post. New thread : http://forum.xda-developers.com/showthread.php?p=53183739
are you using the files from here http://forum.xda-developers.com/showthread.php?t=2590700
If your phone is not booting you will need to sideload the rom in recovery
Hello all galaxy note 4 910C users...below is the guide to multiboot different ROMs on your galaxy note 4 910c model.
1. Install the dual boot patcher app from the following link and also download the zip file which can be used while in recovery when needed........https://snapshots.noobdev.io/
2. Select patch zip...select the note 4 exynos model and select the data slot and write any name in id field...this id would be used later to flash any zip to the Rom on data slot.... Then select the tw/aosp ROM and tap to patch. The touchwiz ROM can be installed only on the data slot since the system memory will not allow it to install as secondary ROM. For eg. If u r using sweet ROM and you want to install simpl ROM ...you have patch it with data slot.
3. Once the patch is successful ...select ROM and click on the bottom right corner with a pink icon. ..and select the patched file and flash the zip.
4. After successful flash, the ROM section in the menu will show two roms. Select the new ROM and reboot. That's it.
Note
1. The secondary ROM can not be flashed if you are using glamor ROM because there is some system mouting error and you can not also flash the glamor ROM as secondary or data slot due to permission fix requirement after the first boot.
2. If you want to install the glamor rom.....there is a workaround..will write in detail later.
3. To flash any zip like xposed to the ROM on data slot patch the zip uaing the id assigned to the Rom and flash the zip.
A big thanks to @chenxiaolong ..original thread ....http://forum.xda-developers.com/showthread.php?t=2447534 by @chenxiaolong.
For using dual rom having glamor as primary please follow the below steps:
1. You should be on note 4 touchwiz rom such as sweet rom , ketan rom , simpl rom , etc
2. Install the dual boot apk and flash the aosp rom to the secondary slot as mentioned in the OP.
3. Reboot to the secondary rom and install the dual boot apk. Go to patch zip and patch the glamor rom with primary upgrade slot. After sucessfull patch flash the glamor rom. After sucessfull flash go the rom section and in it will show the primary rom as glamor.
4. Click on the 3 dot menu and select wipe rom and delete cache, dalvik and data only. Then select glamor rom and it will switch to glamor rom and then reboot and after 5 min go to recovery and fix the permission. Wait for a solid 15 to 20 min and you would reboot in to glamor rom.
5. Once you set your rom go to system and open the build.prop and paste the following at the end and save and reboot the phone
ro.patcher.device=treltexx
6. Open the dual boot app and switch to secondary rom and you would be able to boot in to the secondary rom.
7. Patch any rom with data slot and flash it. To flash anything to glamor or rom on data slot you need to reboot in to secondary rom. This rom will act only for flashing the stuff and you can not flash anything to secondary rom.
You can use end number of roms on data slot till your memory is out of space.
Hi! Can you please explain how to backup the secondary rom? Also, is it safe to delete a rom inside the app?
Thanks, and congratulations for the great work!
Regards!
Dual Boot Patcher - Dual boot any ROMs on your Galaxy Grand Prime VE
Huge thanks to @chenxiaolong for his wonderful app, bringing a new life to our device
Now let's get started!
This app patches...
Custom kernels for dual boot support
ROMs so that they can be installed as secondary
Google Apps packages for AOSP-based ROMs
SuperSU so that it can be used in the secondary ROM
NOTE: If you want to dualboot a TouchWiz ROM, I highly recommend installing TW as the primary ROM. Otherwise, any mods will need to be patched before flashing.
How to use the patcher
Android
Download the patcher apk and run it. Tap "Patch Zip File" from the navigation drawer and choose the file you want to patch.
Windows (GUI)
Double click DualBootPatcher.exe and choose the file you want to patch.
--------
After patching the zip file, a new file, like some_rom_dual.zip file will be created. For example, patching ktoonsez's
KT-SGS4-JB4.3-AOSP-TMO-08.28.2013.zip
would create a new
KT-SGS4-JB4.3-AOSP-TMO-08.28.2013_dual.zip
Instructions for dual booting
Before doing anything, download the Dual Boot Patcher app and the DualBootUtilities.zip from the download section below.
The patcher offers several locations for installing ROMs:
Primary: This is normally used for installing a zip to the primary ROM. It is not required, but is strongly recommended because it has code to prevent the zip from inadvertently affecting other ROMs.
Dual: Dual/Secondary is the first multiboot installation location. It installs to the system partition. This is a good spot for installing a second ROM because it doesn't take any space away from the internal storage.
Multi-slots: There are 3 multislots: multi-slot-1, multi-slot-2, multi-slot-3. These install to the cache partition. This is specifically for devices, like the Galaxy S4, that have a massive cache partition.
Data-slots: There can be an unlimited number of data slots. These install to the data partition and eat up space on the internal storage. This is useful for devices where the system partition is nearly full and the cache partition is tiny. These slots are named "data-slot-[id]", where "id" is something you provide in the app.
Extsd-slots: There can be an unlimited number of extsd slots. These install to the external SD card, which is useful as it keeps the ROMs off of the internal storage. Note that the ROM's data files are still stored on the data partition.
With that said, let's get to the "how to"!
First, boot into your primary ROM and install the Dual Boot Patcher app
Open the app and go to "Roms" in the navigation drawer. It will ask if you want to set the kernel. Make sure that you do.
Go to "Patch zip file" in the navigation drawer and patch the ROM or zip you want to install. You can select one of the installation locations described above.
There are two ways of flashing the patched zip file. You can either flash it normally from recovery or flash it using the in-app flashing feature. Both methods are explained below.
Flashing from recovery
To flash from recovery, just flash the patched zip file like you would for any other zip. Nice and simple.
In-app flashing
To use in-app flashing, go to "Roms" in the navigation drawer, tap the floating button on the bottom right, and add the zips you want to install. You can queue multiple zips and they will all be flashed in one go. Once you've added all the zips you want to flash, click the check mark in the action bar and they will be flashed right away.
A normal backup from recovery will backup every ROM. If you would like to back up ROMs individually, please see @rlorange's awesome tool: http://forum.xda-developers.com/showthread.php?t=2491299
How do I...?
Switch the ROM if something doesn't work properly?
You can flash the DualBootUtilities zip from recovery. It will provide a menu interface that allows switching to the various ROMs.
If you have TWRP, you can also switch manually by tapping Install -> Images (bottom right) -> Go to /sdcard/MultiBoot/[Your ROM]/ -> flash boot.img.
Wipe /cache, /data, /system, or dalvik-cache?
The easiest way is to do it from the app while booted in another ROM. Just go to "Roms" in the navigation drawer, tap the 3 dots options menu for the ROM you want to wipe, and tap "Wipe ROM".
Alternatively, flash the DualBootUtilities zip from recovery, which will also allow you to wipe a ROM.
NOTE: Don't use the recovery's built-in wiping abilities as that may delete non-primary ROMs!
Update the primary ROM?
Patch the zip for primary and flash it. The "primary" installation target is designed so that other ROMs won't be affected when you want to flash something for the primary ROM.
Update a non-primary ROM?
Patch and flash the zip exactly like how you did it the first time.
Flash a mod or custom kernel for the primary ROM?
Patch it for primary before flashing. If the zip does not wipe /cache, it is also safe to flash it directly.
Flash a mod or custom kernel for a non-primary ROM?
Just patch and flash it
Downloads:
[LINK] Dual Boot Patcher
Source code:
DualBootPatcher: https://github.com/chenxiaolong/DualBootPatcher
Build instructions: https://github.com/chenxiaolong/DualBootPatcher/tree/master/docs
XDA:DevDB Information
Dual Boot Patcher, App for all devices (see above for details)
Contributors
doesntexits, chenxiaolong
Source Code: https://github.com/chenxiaolong/DualBootPatcher
Version Information
Status: Testing
Created 2016-12-20
Last Updated 2016-12-20
Reserved
Reserved
Thank you.
This is a custom zip to be flashed over a stock/slightly modded build. Backup Current System in case you have any issues. You must be rooted and BusyBox installed. This shouldn't trip safetynet on current update version 13.x (8/18/17)
This IS compatible with bad boys rom now and shouldn't break any of his mods.
I can not be held responsible for any issues arising from this zip, you remove my liability and accept these terms by continuing to the downloads section and installing this in your own free will =)
What This adds :
Modded systemui with 3minit clock and 3minit battery (perspective apps as well)
Modded ACC files for hotspot mod
Replaces Stock Boot-animation to custom DevDigitel Choice
Adds Busybox to System/xbin Version 1.27
Flash Via Twrp, Reboot and enjoy.
Download Link:
Mods Zip ( Flash This over ANY build )
https://www.androidfilehost.com/?fid=889764386195923985
Mods Zip ( Use this one if running a Bad-Boys Rom/ Will work with others but will not clean install )
https://www.androidfilehost.com/?fid=745425885120756392
3minit clock / batt screenshot