Here are the stock deodexed roms for anyone that uses them. There are absolutely not changes at all except that it has been deodexed and zipaligned. There are no code changes or file tweaks at all.
The package is split into two parts, the first zip is the main zip that MUST be flashed. The second zip is all the bundleware that was removed, install if you want the bundleware back.
If there is a patch listed for a rom, it is recommended to install that after flashing the base rom.
You must use the normal pkg before installing, so for example if you want to use the stock 360 one you should update with the 360 pkg and THEN use this.
Requirements:
Clockwork Mod installed
Matching pkg flashed beforehand*
Instructions:
Prereqs: Update with the matching PKG
Copy latest base zip to sdcard
Copy latest patch zip to sdcard
Turn off device
Set vibrator slider to on/up
Press and hold Vol Down + Power Until menu appears
Select base zip from list and flash
Select patch zip from list and flash
Finished
Optional: Root your device
Available Roms:
325:
base v1 zip
removed files v1 zip
408:
base v1 zip
removed files v1 zip
So far so good.
TheManii said:
Here are the stock deodexed roms for anyone that uses them. There are absolutely not changes at all except that it has been deodexed and zipaligned. There are no code changes or file tweaks at all.
You must use the normal pkg before installing, so for example if you want to use the stock 408 one you should update with the 408 pkg and THEN use this. If you do not you will end up with a brick.
FAILURE TO FOLLOW DIRECTIONS WILL RESULT IN A BRICK: I simply cannot assist with troubleshooting the venue at the time being, DO NOT FLASH if you do not fully understand the process listed.
Click to expand...
Click to collapse
Just finished pushing the deoxed version to my phone, no issues so far.
I released CWM 5.5 now so these images will be taken down soon and converted into standard update zips.
The pre-rooted one will be completely removed as you can simply flash superuser.zip afterwards
the updates have been converted over to update zips and the old ones have been removed.
Their contents are identical though, if you had previously flashed the img version you do not need to reinstall the zip version.
325 has been added
can u make a versions with russian/ukrainian languages?
I will release a lang pack for 408 soon, I dont recall if ukranian is in it, russian is though
multi-language update v3 for 408 deodexed: http://hotfile.com/dl/143658861/6dc843c/update-Russian-for-DELL-Venue-408-v3.zip.html
Russian, Ukrainian, etc.
Translated:
- system UI
- settings
- calculator
- calendar
- galery
- phone
- contacts
- camera
- browser
- stk
- clock
- sms/mms
- music
Translations are still in work, so next updates will be later.
Can somebody explain to me, what's the difference between 325 and 408 ROMs?
---------- Post added at 03:16 PM ---------- Previous post was at 03:08 PM ----------
And also, as far, as I understood from the FAQ, I should install stock 408 ROM and then flash 408.zip?? If yes, where can I find stock 408 PKG?
325 - Android 2.2 - Froyo
408 - Android 2.3 - Gingerbread
And yes, u must flash at first rom, and then deodexed
TheManii said:
Here are the stock deodexed roms for anyone that uses them. There are absolutely not changes at all except that it has been deodexed and zipaligned. There are no code changes or file tweaks at all.
The package is split into two parts, the first zip is the main zip that MUST be flashed. The second zip is all the bundleware that was removed, install if you want the bundleware back.
If there is a patch listed for a rom, it is recommended to install that after flashing the base rom.
You must use the normal pkg before installing, so for example if you want to use the stock 360 one you should update with the 360 pkg and THEN use this.
Requirements:
Clockwork Mod installed
Matching pkg flashed beforehand*
Instructions:
Prereqs: Update with the matching PKG
Copy latest base zip to sdcard
Copy latest patch zip to sdcard
Turn off device
Set vibrator slider to on/up
Press and hold Vol Down + Power Until menu appears
Select base zip from list and flash
Select patch zip from list and flash
Finished
Optional: Root your device
Available Roms:
325:
base v1 zip
removed files v1 zip
408:
base v1 zip
removed files v1 zip
Click to expand...
Click to collapse
Thankyou Verymuch
I like this "DeodexedV408" Gingerbread Good FW
Hi,
The links below dont seem to be working. Is there an alternate mirror for the same.
Thanks.
TheManii said:
Here are the stock deodexed roms for anyone that uses them. There are absolutely not changes at all except that it has been deodexed and zipaligned. There are no code changes or file tweaks at all.
The package is split into two parts, the first zip is the main zip that MUST be flashed. The second zip is all the bundleware that was removed, install if you want the bundleware back.
If there is a patch listed for a rom, it is recommended to install that after flashing the base rom.
You must use the normal pkg before installing, so for example if you want to use the stock 360 one you should update with the 360 pkg and THEN use this.
Requirements:
Clockwork Mod installed
Matching pkg flashed beforehand*
Instructions:
Prereqs: Update with the matching PKG
Copy latest base zip to sdcard
Copy latest patch zip to sdcard
Turn off device
Set vibrator slider to on/up
Press and hold Vol Down + Power Until menu appears
Select base zip from list and flash
Select patch zip from list and flash
Finished
Optional: Root your device
Available Roms:
325:
base v1 zip
removed files v1 zip
408:
base v1 zip
removed files v1 zip
Click to expand...
Click to collapse
pkg file must be flashed 1st. So are you saying.
Install 408 recovery,
rename Thunder_408_20707_14.pkg to update.pkg
use 408 recovery to flash update.pkg
Then,
Install CWM
Use CWM to flash base v1 zip
then CWM to flash removed files v1 zip (assuming this is what is being called as latest patch)
Correct?
If you are not already on 408: yes, you should flash the 408 pkg.
If you are on it, you can skip the flashing of the update.pkg
Also yes on the actual install, you need to use a custom rec to flash the update.
The removed files are just that, they're files that I removed since they're not needed.
I simply made a seperate zip for anyone that actually wants it.
Links updated, be aware that I currently do not support them.
I wont be able to assist with any issues with them
May be someone have multi-language update v3 for 408 from post: https://forum.xda-developers.com/showthread.php?p=21793422
Re-upload please.
Check this out. http://forum.xda-developers.com/showthread.php?t=1908269
***NOTE***
You can flash this zip over any ROM, it will launch Aroma Installer and will allow you to install many tweaks and mods to speed up your ROM and add more functionality. YOU CHOOSE THE TWEAKS/MODS YOU WANT INSTALLS THROUGH A TOUCH SCREEN INTERFACE KNOWN AS AROMA INSTALLER.
Try this on *ANY ROM* for a great increase in speed. Make sure to download the correct version. (READ THE THREAD)
*****FOR THOSE WHO DOWNLOAD BEFORE READING*****
**********BEFORE FLASHING THIS PLEASE*************
- Open the zip of the rom you are running (the .zip file that you flash in recovery)
- Inside this zip, navigate to : META-INF/com/google/android
- Extract the file called "update-binary" and rename it to "update-binary-installer"
- Open Pimp my Rom's zip (i.e : PIMP_MY_ROM-v1.4.1-Universal.zip)
- Inside this zip, navigate to : META-INF/com/google/android and delete "updater-binary-installer"
- Now copy the "update-binary-installer" file you extracted from your rom to Pimp My Rom's zip (still in META-INF/com/google/android)
- Close the zip and flash it, the installation process should now work normally so you can Pimp your Rom !"
atrix4g18 said:
Check this out. http://forum.xda-developers.com/showthread.php?t=1908269
***NOTE***
You can flash this zip over any ROM, it will launch Aroma Installer and will allow you to install many tweaks and mods to speed up your ROM and add more functionality. YOU CHOOSE THE TWEAKS/MODS YOU WANT INSTALLS THROUGH A TOUCH SCREEN INTERFACE KNOWN AS AROMA INSTALLER.
Try this on *ANY ROM* for a great increase in speed. Make sure to download the correct version. (READ THE THREAD)
*****FOR THOSE WHO DOWNLOAD BEFORE READING*****
**********BEFORE FLASHING THIS PLEASE*************
- Open the zip of the rom you are running (the .zip file that you flash in recovery)
- Inside this zip, navigate to : META-INF/com/google/android
- Extract the file called "update-binary" and rename it to "update-binary-installer"
- Open Pimp my Rom's zip (i.e : PIMP_MY_ROM-v1.4.1-Universal.zip)
- Inside this zip, navigate to : META-INF/com/google/android and delete "updater-binary-installer"
- Now copy the "update-binary-installer" file you extracted from your rom to Pimp My Rom's zip (still in META-INF/com/google/android)
- Close the zip and flash it, the installation process should now work normally so you can Pimp your Rom !"
Click to expand...
Click to collapse
Is this working well for you on the TP?
edit. no longer relevant
Guys, sadly this doesn't work on the TP I tried it some time back but the TP reboots to moboot shortly after the installation begins.
It's a shame as this gives great improvements in multiple areas (I flashed it on my SGS 2 and it made wonders)
Edit: As of v2.0 it works on he TP, I highly recommend it.
Which one should i download? LDPI, MDPI, HDPI or XHDPI?
alex1301 said:
Which one should i download? LDPI, MDPI, HDPI or XHDPI?
Click to expand...
Click to collapse
I just DL DPI Changer from the market and it says my current setting is MDPI (160).
I hope this helps.
I am currently working on a stock(ish) ROm for the P5210 (wifi)
So far this is running well on my device
- Stock P5210UEUAMK1
- System apps updated to latest
- DeOdexed
- Extended power menu mod integrated
- Rooted/BusyBoxed
I have it currently on as a TWRP backup file (most changes were created on the device itself)
I am trying to make an install zip but here is where I am having problems.
I am having issues with Android kitchen compatability when it comes to creating the edify updater-binary script
I have installed an edify-defs file for this device but nothing seems to work. It appears that an updater-script will have to be created manually.
I have attempted to use a modified verson of Mod57's script that is packaged with his MI8 ROM but no luck there either.
I can provide the TWRP backup that I have if there's interest in making this all work. It could provide a good base for future roms
townsenk said:
I am currently working on a stock(ish) ROm for the P5210 (wifi)
So far this is running well on my device
- Stock P5210UEUAMK1
- System apps updated to latest
- DeOdexed
- Extended power menu mod integrated
- Rooted/BusyBoxed
I have it currently on as a TWRP backup file (most changes were created on the device itself)
I am trying to make an install zip but here is where I am having problems.
I am having issues with Android kitchen compatability when it comes to creating the edify updater-binary script
I have installed an edify-defs file for this device but nothing seems to work. It appears that an updater-script will have to be created manually.
I have attempted to use a modified verson of Mod57's script that is packaged with his MI8 ROM but no luck there either.
I can provide the TWRP backup that I have if there's interest in making this all work. It could provide a good base for future roms
Click to expand...
Click to collapse
Sorry can't help here but hope someone will so the work can progress
This is a custom recovery flashable zip of the F400K V20C. This requires ROOT and Custom Recovery. Flash at Your own Risk!
1-----> Download and save the ROM and I used the latest from Chainfire's wonderful Super User which can be found here http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
2----->Place the F400K20C.zip and Super User zip on internal storage.
3----->Reboot into recovery and backup existing ROM(if you wish)
4----->Perform a factory wipe with recovery and flash the F400KV20C.zip and the latest Super User zip(which is Required for ROOT access in Lollipop Android version 5.0).
5----->Reboot System which can take a little bit.
Download:
F400KV20C.zip
I would like to thank the following:
I pulled parts from rmlsalta F400S ROM found here @rmlsalta Please thank rmlsalta for their work.
Chainfire for his great work with SU on Android @Chainfire
Fixed LTE Now Works Properly.
Attached to the bottom is a Build prop modified for ATT on this software version F400K20C. It will add the change Icons, Widgets, and Contacts(Adds the Individual Text Tones settings in Contacts).
To Install: Download and save on SD or Internal.
1---->Requires Root and a Root exploring tool.
2---->Backup your old build prop however you choose
3---->Place the new build prop in the /system/ directory
4---->Make sure to set permission first rw-r--r-- or CHMOD 666
5---->Double check again otherwise you can boot loop phone as the build prop is important!
6---->Reboot Phone and confirm setting.
Enjoy!
Hi there,
This is my custom google package for android 11-[R] based on my universal script for dynamic partitions.
What advantages ???
. Fast flashing (less than 3 seconds !!!) : to flash right away after flashing your custom vanilla ROM.
. Clear package : all contents are visible to the user who can manipulate/update on its own !
. Compatible with all [x64] devices ...
DOWNLOAD
Here
Reserved
Update 2021-10-07
addon.d remover (.zip) added :
. to flash before you install/update a new build of your custom rom ... so you have a clean build install without persistent open gapps
. No need to flash the whole original software to cleanup open gapps !