My tab S7 has a faulty USB port and does not work properly when connected to a PC, having to fiddle with the connector before it will be recognized by the PC. In the middle of an Odin attempt, it randomly disconnected and has left me in a perma-download state. It's gotten to the point where I've tried multiple cables, PC's and even using contact cleaner to try cleaning the port with no luck. I basically have a fancy looking paperweight with no parts available for replacing the damaged port.
Related
when phone is plugged into PC it will not show a usb connection on the phone it just charges the device the computer also does not see the phone. I have also plugged it into my macbook and nothing happens. Anyone else have this problem or any solutions?
What's your ROM?
when you put the usb in the charging port on the TB, does it feel wiggly or loose to you? It's supposed to be a solid connection. My last TB was loose in the charging port and would do the same thing
usb
try another cable, try taking out the card and putting it in the pc, the data pins might not be establishing a connection
Hey guys after trying everything possible and seeing that my buddys TB connects fine i took it to Verizon and their sending a new one in the mail hopefully that solves everything
I have the same problem, computer will charge but not recognize usb connection nor will phone recognize connection? Have had this problem across multiple roms thinking it was software problem but to no avail. Have tried multiple cables and computers? My connector appears to be in good condition visually , which probably doesn't mean much. Just wondered if anyone could think of another possibility before I lean towards hardware problem?
Had this issue before get a new cable if that doesnt work idk thats all i had to do.
I've tried 4 cables and 3 computers and 3 roms.... Guess It's a hardware problem.
had the same issue and it was hardware and my phone was replaced by Verizon.
Sometimes if you don't plug into the usb 2.0 port, things can get fishy. Usually the 2.0 port is alone opposite of the other usb ports on laptops.
My problem is that I cannot connect my Galaxy S II to computer. When I try to connect it only says "unknown device". I have tried with newest Kies and without Kies. With multiple computers with Vista and Windows 7 32bit. Also downloaded Samsung Galaxy S drivers manually from web but with no avail. And I have tried with Usb-debugging on and without it. I also tested USB-mass storage setting but it does nothing. Computer also says "unknown device" when I try to connect phone while in download mode.
The charging works btw.
When I connect the cable my phone just makes the normal sound but the mass storage android man newer appears to top tray. I have also made factory reset and cache delete from recovery but with no luck.
I would like to flash different rom with Odin but I cannot do that when the connection is not working. My current rom is official XXLPQ ics. The usb cable isn't the problem because I have tried with different cables which work normally with other phones.
Is the warranty repair only solution? Really wouldn't want to be without my Galaxy during the repair time.
Sounds like it's going to need a check over, if it wasn't for the fact you have tried multiple computers AND leads, as I had a similar problem but found it was down to my PC needing a fresh install.
Unless others with similar experiences have advice it doesn't sound good, as though pins 2, 3, or 4 have problems maybe, or that the board within the phone has bent up or down through rough handling/tug on the cable.
When did it start happening? I had a fright by tripping over the phone while plugged in, and ripped the plug out while launching the phone across the room. It broke the charger and thought I'd killed the port on the phone, but found if I propped the plug up and put weight on the phone it would connect, like this...
hxxp://i.imgur.com/y1bPj.jpg
Might work if the board has got a whack like mine did.
Sub Atomic Specialist said:
Sounds like it's going to need a check over, if it wasn't for the fact you have tried multiple computers AND leads, as I had a similar problem but found it was down to my PC needing a fresh install.
Unless others with similar experiences have advice it doesn't sound good, as though pins 2, 3, or 4 have problems maybe, or that the board within the phone has bent up or down through rough handling/tug on the cable.
When did it start happening? I had a fright by tripping over the phone while plugged in, and ripped the plug out while launching the phone across the room. It broke the charger and thought I'd killed the port on the phone, but found if I propped the plug up and put weight on the phone it would connect, like this...
hxxp://i.imgur.com/y1bPj.jpg
Might work if the board has got a whack like mine did.
Click to expand...
Click to collapse
I received it like this. Only 4 months old though. I tried to bent the cable plug slightly when connected to computer but it didn't help.
check wiv diff cable..
install phone drivers in kies...
check usb port on phone and pc ,if any debris then clean...
android on tray -drag down and c if u can connect as storage...
rocky23 said:
check wiv diff cable..
install phone drivers in kies...
check usb port on phone and pc ,if any debris then clean...
android on tray -drag down and c if u can connect as storage...
Click to expand...
Click to collapse
As I mentioned earlier I have tried all that.
Having a strange problem with my phone atm.
The other day I tried connecting to my PC (Win 7) to try and root my phone, only to find that my computer wouldn't recognize the phone. I've had this problem once before with my old Droid X, and that was due to me accidentally reversing the power lines on a homemade USB Host cable, which ultimately fried the USB port.
I thought maybe something similar had happened, as i've been using another homemade Host cable for charging the phone lately. This cable had never given me problems in the past, but I thought maybe something came lose and shorted. However, using that same cable, I can connect a mouse or a keyboard to my phone no problem, so I know that the USB port is still working. Because of this, i'm under the impression that the phone is maybe stuck in host mode?
I thought it might be the cable I was using, but I just bought a fresh one and it's doing the same thing: I'll hear the Win 7 device connected tone go off twice, but it won't show up with the rest of my drives, and the USB connection icon won't show up in the status bar on the phone, although the phone charges fine.
Tried factory reset, didn't help.
Also tried it on two different computers, and no dice. All the computers have the Motorola Device Manager installed.
Any ideas?
EDIT: ****! Wrong section
EDIT: Dunno if this is "progress", but after cleaning the port out with rubbing alcohol, and reinstalling the motorolla device manager, I now get a "USB device not recognized" error every time I plug the thing in... Mouse still works fine though.
Fixed it, for anybody who actually is reading this.
First, since my phone worked fine as a USB host, I tried taking one of my cables and grounding pin 4 to turn it into a Host cable.
No dice. I noticed a resistor on pin 4 though, which I thought was kinda weird for something that's supposed to be floating.
Then I read up about the whole "motorola factory cable" thing. Took the same cable, undid the Host mod, and then pulled out the resistor. Voila! Problem solved.
I guess the "Universal" in "Universal Serial Bus" was just a joke, right?
Hi,
Having a problem since a few weeks with my s3.
Normally i could connect wiht my phone to any pc,, without any problems. Either it be unix, win, whatever...
Suddnely it stopped working, only thing that happens is charging when i connect it to my pc. Different cables tested, original one, etc..
Connecting it to different pc's resulted in a no go.. so it must be phone related.
No windows pop up, or anything!!
So I figured: Let's install a new rom.
Tried ultima 15 rom, got a different CM rom now (sentinel)... all to no avail.
Is it possible that this has something to do with my radio?
rom info:
android: 4.3
baseband: CEEMG2
Anyone have an idea what to do? Even ADB push ain't working..
See your identical post
I experienced the same problem when m using the Galaxy Nexus S But it was solved by using the app from play store named SD booster... In this app m just set the value of sd card to 1024 give root access and Boom my phone is connected as normal
If this not help then i seriously recommend you to replace the charging port of the mobile through samsung outlet
Go into developer settings, some ROMs may have different ways to get into develop er setting and after you get in make sure USB debugging is enable ^.^
Sent from my SPH-L710 using XDA Premium 4 mobile app
Usb debugging is not required for phone to pc connection see basic faqs and guides .
But as OP has ruled out drivers and cable that only leaves the phone so its worth trying .
Usual replies are
Drivers
Cable
Dirty USB Ports
Not connected to main-board usb port .
I had same issue with my Galaxy SII and when i took it to service center they said mother board needs to be replaced.
So after that SII was good as new.
Got same problem here.
phone is charging over usb , but no data connection (tried different usb cables, different usb ports, different pc etc) but nothing..
also.. tried in download mode and so (after reading forums..) but without success.
then i decided to dissasemble that phone and look, what's inside that beast
cleaned usb port (inside, with contact cleaner), resoldered all pins and etc..
reassembled it back to one piece again and still, no data connection, but only charging
so, here i am, what to do next ? change the usb port on motherboard ?
(visually, everything looks right, good solder points and etc.)
Thanks, Martin
hani93 said:
Got same problem here.
phone is charging over usb , but no data connection (tried different usb cables, different usb ports, different pc etc) but nothing..
also.. tried in download mode and so (after reading forums..) but without success.
then i decided to dissasemble that phone and look, what's inside that beast
cleaned usb port (inside, with contact cleaner), resoldered all pins and etc..
reassembled it back to one piece again and still, no data connection, but only charging
so, here i am, what to do next ? change the usb port on motherboard ?
(visually, everything looks right, good solder points and etc.)
Thanks, Martin
Click to expand...
Click to collapse
if anybody interested:
i've got it working again :victory:
basically, the problem was the hard way (crap usb data connections on motherboard)
soldered new ways for data+ and data-, and now it's back alive again...
(pictures of ways in attachment)
Martin
see you fixed it already but a note to others :
try using usb port right on the motherboard instead of the case front panel usb ports.....connecting to the front usb ports didn't work for me on some roms, but the rear one always connected so I just have a long cable running out of the back to connect my phone and it works on all roms I've used so far
Nice work hani93, i unfortunately do not dare to desolder and solder this stuff
I've noticed another thing though which is weird!!
When i tried to charge my phone via the power charger (the ac one?), when i check my battery view it still says that i'm charging via USB.
I don't think this is correct, i thought it should say AC or something and when charging via USB port on pc it should display USB?
I think this might be one of the issues that it's also not popping up on the computer.
Anyone know what is causing this or someone can confirm that when charging via power supply it should say something else then USB?
Just confirming your question when charging by PC it says (USB) and when its charging from the Mains it says (AC).
hmmm... guess it must be a hardware issue then?
Either usb port or mainboard... christ...
open it up and cleaned the contacts a bit of the usb port...
Still not functioning..
Morbie said:
open it up and cleaned the contacts a bit of the usb port...
Still not functioning..
Click to expand...
Click to collapse
try to go into Download mode (volDown+Home+Power) and then connect usb, same situation?(eg, no data connection to pc ?)
if nothing again.. try to clean usb port inside (where you plug usb cable), sometimes there is dust and etc. then it stops working.
also, how did you clean contacts on motherboard ? i suggest to take soldering iron with clean bit, and drag iron along the pins.
It all began when I was trying to transfer a file to my windows 10 Dell Laptop. I connected my phone using an original usb cable. The computer recognized the phone for a few seconds and the usb connection dialogue appeared on my phone, but then the computer said it had gotten disconnected so I had to transfer the files via Bluetooth. Since then it will only charged plugged to that computer or to a MacBook charger. It won’t recognize the original charger. It would only charge either if connected to my PCs USB port or connected to a MAcBook pro charger. I’ve tried several regular phone chargers and cables, including the original ones and they won’t work.
I thought the USB port had gotten wet because it was giving me that message when I tried plugging it to a regular Samsung charger, but when I plugged it to the Mac book charger which uses also a C Type cable it worked and the moisture detection notification disappeared.
I’ve already tried doing a soft reset and wiping out the cache...
Please advice.