{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Read the entire OP! Be respectful to each other and don't ask for ETAs, it's considered as being rude!
Fluid is an aftermarket Android custom ROM distribution based on AOSP, focused on bringing a better UI/UX to Android with a fluid experience coupled with themes and customisations.
#FeelsFluid
Fluid doesn't aim at providing all the customisation available on the planet. We are focused on a cleaner, more Material design approach, with a few twists [NOPARSE][/NOPARSE] that assured, we do have a dedicated theme engine with cool stuff getting added every new update. So sit back and enjoy Fluid on your device!
Download Fluid Redmi Note 10
Redmi Note 10
Wanna experience Fluid on your phone? Go ahead fam!
Code:
[b]- Download the ROM
- Backup everything
- Make a full wipe (system, data, cache, dalvik)
- Flash the FluidOS via OTA script / OrangeFox
- Reboot and let it boot (NOTE:- The Rom takes much longer time to boot be patient (Splash screen may appear for much longer time))
- Boot into twrp
- Flash Gapps (Flamegapps Basic recommended)
- And at last Reboot!
[First boot will take a few minutes! Have patience]
Clean Flash is always recommended![/b]
A clean flash is always recommended. Bug reports are not appreciated if not clean flashed.
Remove any kind of security PINs/Password and Fingerprints before flashing this build.
[/b][/CODE]
Wanna report bugs and want them begone? Give Logcats, mention your device name, mention if any mods and kernels, if used and please be specific about it. By helping us, you are helping yourself too.
-> How to take Logcats?
https://goo.gl/UcTM9 and https://goo.gl/J4CSEP
Visit our Website. Subscribe to our Telegram Announcements Channel. Also join our Telegram Community support Chat!
Want to contribute to the development of this ROM?
Checkout our Github
DEVICE SOURCES
Kernel :- Kernel
Common_DT:- xiaomi-sdm678 / android_device_xiaomi_sm6150-common
DT :- xiaomi-sdm678 / android_device_xiaomi_mojito
People behind this amazing ROM!
- Ender1324
- AndroBuddy
- SebaUbuntu
- Dyrex2004
- Ovenoboyo
Screenshots :- SS
Changelogs
========================
ALPHA 1
OCT 14 , 2021
========================
+ Initial Alpha Build
========================
ALPHA 2
OCT 20, 2021
========================
+ Updated WCS Kernel included
+ Improved System Stability
+ Increased Reseved Partition Size ( Fixes issues of flashing bit more heavier gapps packages ).
+ Now Build can be Flashed via OrangeFox (Thanx to Ayaxat for testing the build).
+ Fixed Screen Recording Lags
========================
ALPHA 3
NOV 8 , 2021
========================
+ Updated WCS Kernel included
+ Tweaked Reserve Partition sizes ( Might fix some flashing issues for some users).
+ Fixed sepolicy denials
+ Selinux is now Enforcing
+ Rom is also force encrypted
+ Improved Booting time
+ sm6150-common: Provide [email protected] on vendor
+ sm6150-common: props: Enable skia reduceOpsTaskSplitting
+ sm6150-common: props: Don't write binary XML files
========================
BETA 1
NOV 10 , 2021
========================
+ New Rebased WCS Kernel included
+ sm6150-common: Set NUM_FRAMEBUFFER_SURFACE_BUFFERS to 3
+ sm6150-common: Build atrace 1.0 service hals
+ sm6150-common: rootdir: Remove enable-low-power trigger from recovery
+ sm6150-common: rootdir: Allow all filesystems for USB-OTG
+ sm6150-common: prop: Disable sf EGL image tracking
+ sm6150-common: Kill kernel cmdline console parameters
+ sm6150-common: wifi: Disable wifi packet logging
+ sm6150-common: configs: power: Remove pixel audio hints
+ sm6150-common: overlay: Disable global mode and CDMA choices
+ sm6150-common: overlay: Allow seamless Doze state transitions
+ sm6150-common: rootdir: Chown drv8846_dev & akm09970 camera nodes
+ sm6150-common: overlay: Snap: Enable camera API v2
+ sm6150-common: sepolicy: Address virtual AB OTA denies
+ sm6150-common: prop: Switch to Codec2 by default
+ sm6150-common:Kang HWUI props from stock mojito qssi-user 11 RKQ1.201022.002 V12.5.3.0.RKGMIXM release-keys
+ sm6150-common:Add 300Mhz scaling_min_freq for CPUBigClusterMinFreq and CPULittleClusterMinFreq
+ Improved System Stability
+ Improved overall responsiveness and fluidity
========================
BETA 2
NOV 16 , 2021
========================
+ Updated WCSF Kernel
+ sm6150-common: add missing hals to FCM
+ sm6150-common: Define [email protected] into FCM
+ sm6150-common: BoardConfig: Drop graphics layer memory buffer
+ sm6150-common: Add HDR & WCG Flags
+ sm6150-common: Do not use phase offsets as duration
+ sm6150-common: overlay: Advertise fingerprint on power button
+ Improved Stability
+ 1080p Youtube playback issue addressed (FWIP)
========================
BETA 3
NOV 29 , 2021
========================
+ Updated WCSF Kernel
+ sm6150-common: Decomonize some camera blobs
+ sm6150-common:Add a missing media blob
+ mojito:Add Few missing camera blobs
+ mojito:Add libcameraservice.so as prebuilt from stock
+ sm6150-common:sepolicy: fix Widevine DRM
+ sm6150-common:Add missing DRM blobs from stock
+ Fixed Widevine L1
========================
BETA 4
DEC 02 , 2021
========================
+ sm6150-common:Build some media and camera packages
+ msm: camera: Use boot clock for recording start time
+ Fixed Camera video recording issues (Checked with Camera2 and Gcam both)
+ Improved System Stability
+ Improved overall responsiveness and fluidity
========================
BETA 5
DEC 07 , 2021
========================
+ arm64: lib: Checkout strncmp back to msm-4.14 version
+ Fixed Random reboot & system crashes on viewing DRM Widevine L1 contents on OTT apps.
+ Improved System Stability
NOTES :- CTS is failed by default use appropriate magisk modules for CTS pass
Use Included LOS recovery for flashing gapps etc.
*NOTE:- There may be bugs in this build
Will test this ROM
Great to see Android 12!!
A little question...
Did you made any specific change to bring-up A12? (i'm not talking about the rom , i'm talking about the changes required to build A12)
alonsoj636 said:
Great to see Android 12!!
A little question...
Did you made any specific change to bring-up A12? (i'm not talking about the rom , i'm talking about the changes required to build A12)
Click to expand...
Click to collapse
Yes you can check my trees i have added the source above
Can I flash this by twrp?
akoaypinoy said:
Can I flash this by twrp?
Click to expand...
Click to collapse
Flash it via Fastboot OTA Tool
KingTigerM30S said:
Flash it via Fastboot OTA Tool
Click to expand...
Click to collapse
Ah okay thanks
This looks really exciting. Is it ready to use as a daily driver?
DLloyd said:
This looks really exciting. Is it ready to use as a daily driver?
Click to expand...
Click to collapse
That's the point of the thread. Try & let the devs know.
MPK99 said:
That's the point of the thread. Try & let the devs know.
Click to expand...
Click to collapse
i Think its ready for a daily driver as i have been using it since its release and faced no bug
muneeb rizwan said:
i Think its ready for a daily driver as i have been using it since its release and faced no bug
Click to expand...
Click to collapse
Awesome. I need to wait just a couple more days for bootloader to unlock then I'll check it out
Currently using this ROM, so far no bug.
Some problems I got:
1. Pending downloads from Gplay. Clear cache is solve this problem.
2. My SDcard need to be re-formated.
Hope a version with more features will available soon.
Sambaldaun said:
Currently using this ROM, so far no bug.
Some problems I got:
1. Pending downloads from Gplay. Clear cache is solve this problem.
2. My SDcard need to be re-formated.
Hope a version with more features will available soon.
Click to expand...
Click to collapse
Pending downloads issue is a gapps issue for that use Nikgapps core it has fixed that issue completely.
Sdcard reformating needed is maybe because this ROM doesn't have encryption support as of now and your are coming directly from A11 where all Roms are encrypted by default for that u have to decrypt before flashing A12
New Build is up Changelogs and Links are updated above
Bro when stable update will come for redmi note 10 ???
Can anyone please write the install instructions. I am in Oranged Fox recovery and not able to flash zip.
I am getting "KInstallDeviceOpenError"
Mrohan200218 said:
Bro when stable update will come for redmi note 10 ???
Click to expand...
Click to collapse
please refrain from asking ETAs... is considered rude
Just wait for it
Ujjawal1810 said:
Can anyone please write the install instructions. I am in Oranged Fox recovery and not able to flash zip.
I am getting "KInstallDeviceOpenError"
Click to expand...
Click to collapse
maybe you messed partitions ... try to flash miui and then , go back to custom rom...
i had same error and i fixed it by flashing miui with miflash tool
alonsoj636 said:
maybe you messed partitions ... try to flash miui and then , go back to custom rom...
i had same error and i fixed it by flashing miui with miflash tool
Click to expand...
Click to collapse
I was able to Pixel Experience ROM. Can I install this ROM using PE recovery? If not then how should I?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM:[7.1.2][OFFICIAL][FINAL][ Resurrection Remix 5.8.5 Nougat [VoLTE/DolbyAtmos/Magisk]
ROM is pretty stable, camera work, good performace, good battery. Ready for everyday use (IMHO).
Work in MultiROM as Internal/Secondary ROM
Download: link
GAPPS (does not included) : http://opengapps.org/ arm64 -> 7.1 -> Minumum required - Pico
Install/Update Note: Please, wipe system, cache, dalvik before install/update rom. Also flash Gapps after ROM WITHOUT reboot.
Sound settings/Viperfx DolbyAtmos now included in the ROM. ViperFX zip for TWRP: link
Here are my settings of viperfx & dolby atmos:
Device Trees:
https://github.com/x2-devel
Special thanks to:
RR Project for awesome ROM
@Tortel1210 for his big work on le max 2 kernel & device tree
@infrag for porting BlackScreen Kernel to Max2, VoLTE blobs and other work on device tree
@sdv22 for his working on framework, doze profiles and powersaving
darkobas for his hard work on OMNI for LePro3, his kernel & help
@ffboy2009 for his big work on le max 2 kernel & device tree
@codeworkx for his working on device tree
@Jrior1 for his working on leeco kernels
@cr3pt for his working on LOS
@arco for his shim for mm-qcamera-daemon for samsung!
@mosimchah for BlackScreen Kernel
And You all guys for testing and using this ROM
Last build: 06132017
ChangeLog
Changelog 02142017:
First build
Changelog 02192017:
Some fixes now more stable
Changelog 02202017:
Fixed autorotation and accelerometer
Changelog 03272017:
New build based on LOS14.1 sources
Changelog 04182017:
* Update to RR-5.8.3 (7.1.2)
* Fix multirom support as Secondary ROM
Changelog 04202017:
* Camera UP!
Changelog 04262017
* Update kernel, fixed performance issue, switch some features. Antutu 152k.
* Fixed incorrect battarey led working (from los gerrit, by Tortel)
* Fix audio_policy for divinebeats
* LePref: Remove unworked HAL switch
Changelog 04262017
* Mic volume fix
Changelog 05062017
- Last ViperFX & Dolby Atmos minimal package (with no garbage) included and work with all sounds, e.g. ringtones
- ViperFX & DA does not cause crash of Gallery and some other app now, also it must work correct with BT
- Pico gapps included
- Build use old (i will name it "STABLE") lineageOS kernel for now. But who want new, can flash it manualy.
- Also included LeTVRemoteControl, LeTVCamera (letvcamera dont work now)
- WIth stable kernel work: IR, Ambient Display
Changelog 05082017
- Dolby Atmos for LeMax 2 (fixed)
- Gapps removed from build
Changelog 05232017
- Add VoLTE support (thnks @infrag for volte blobs)
- Update audio configs, fix some audio issues
- Update powersaving system, doze profiles
- BlackScreen 2.1 Kernel (thnks @mosimchah for kernel & @infrag for porting to max2)
Changelog 06132017
- Updated Adreno & Vulkan blobs (thnks @infrag)
- Kernel: BS2.3 (thnks @mosimchah & @infrag)
- Ramdisk now compatible with LOS, you may install other kernels without changes.
- Last RR sources
- Many other small fixes (can be found on github)
Changelog 09182017
- ROM: Security Patch 05 Sep
- Device: fix low volume in cam recording
- Device: enable sdcardfs
- Kernel: BS3.5-RRPS
- Kernel: Autofocus fix
- Kernel: Optimized battery life
- Kernel: fix blueborne
- Kernel: fix sdcardfs driver for correct work with Multirom
Changelog 10042017
- Using new vendor tree fully remaked from beginning (from 23S and OB20)
- Switched to new radio stack
- Fix sdcardfs for multirom (it will work without patches in secondary rom with sdcardfs)
- Fix autobrightnes values
- Fix low level sound record
- Dex preopted
- ViperFX, SnapdragonCamera, AKT Profiles was removed from build
- Security patch 05 Oct
- Autofocus fix (thanks infrag)
- Some power tweek
- Kernel BS-3.5.i-RR-PS
Changelog 10062017
- Blobs downgraded from 23S to 19S, its more stable, camera has no "white dots".
- Slowmotion fix
- Removed unneeded shim for ims, it cause camera "clicks"
- VoLTE must work now
- Autobrightnes tweek
- Improved battery
If you looking for ResurrectionRemix-M-v5.7.4 OFFICIAL FINAL, look here:
ROM:[x82X][6.0.1] ResurrectionRemix-M-v5.7.4 OFFICIAL FINAL
Download: http://www.resurrectionremix.com/ -> Download -> x2
Mirror (Google Drive): link
Maintainer: @andr68rus
Device Tree: @Tortel, @cr3pt, @andr68rus https://github.com/tortel
Dont work
- VoLTE
Work
- All other.
Installation:
1. Backup your current ROM
2. Download the rom ResurrectionRemix-M-v5.7.4.xxxxxx.zip file
3. Move to phone
4. Reboot the phone in recovery [TWRP]
5. Wipe: "System, Cache, Dalvik, Data"
6. Install -> ResurrectionRemix-M-v5.7.4.xxxxxx.zip
7. Reboot
GAPPS (does not included) : http://opengapps.org/[/show upurl] arm64 -> 6.0 -> Minumum required ( Pico ) Sound settings/Viperfx:[GAPPS (does not included) : http://opengapps.org/ arm64 -> 6.0 ...ogle.com/open?id=0B-2l1xmYBAzsaDR3NldfbGljd0E (c) royalseeker, original topic here
2. I recomend turn on speaker optimisation in viperfx and configure your dolby atmos. This will give you very good sound.
ChangeLog:
26 Jan 2017:
* accelerometer fixed (thnx to @Tortel)
* Snap Camera can now 21 mp
* LED Notification fixed
* Remote Control included.
30 Jan 2017:
* Camera2Api work, set by default
- RIL still have problem with "Only 2G mode"
02 Feb 2017:
* 4K Video in Snap
* Voice quality (Need test, also if you will install divinebeats, install patched version!), also some other sound fix, please report about problems.
* Some changes in Ambient display, now it fully work (You need to enable it in Settings - Ambient Diplay (not in DIsplay!)
* Removed D2TW from settings
* Force enabled camera1api: whatapp and other app work nice.
+ Added LeecoCamera App from S22 test only (to run it you need enter settings -> app -> permission and enable permission, it will not ask for it by default). Panoramic dont work.
10 Feb 2017
* Fix some errors from previos build (LED, hardware keys).
* Try to fix 2G.
11 Feb 2017
* Wifi 802.11n channel bonding fix.
* Return back individual sim on/off switch.
14 Feb 2017
* Fix some errors, FW now stable.
17 Feb 2017
* Patch Level 12012016
19 Feb 2017
+ Now we are OFFICIAL
* Competly moved to LOS device tree sources
+ Added OTA (Configuration -> Update)
- Removed LeTVRemoteControl, LeTVCamera (can be installed from ZIP)
+ Fixed wifi 2.4GHz+BT issue
+ Snap from LOS repo with autoresoluton fix
* Speakerphone fix
* Device name fix for PlayMarket
20 Feb 2017
- Fix wifi tethering
- Some changes for viperfx work (change fluencetype to none, add sample rate in audiopolicy)
- Shorten default BT name "LeEco Le Max 2" -> "Le Max 2"
- Changes in advanced settings translation (ru(full), es(part), cn(part))
26 Feb 2017
- Security patch level updated to 01/01/2017
- Added hardware buttons disable/enable switch
- Added Hardware buttons light brightness + mode settings
- Added leeco quick charge settings (Settings-> Configuration -> Battery).
- Changed live display default day color temperature from 8000 to 6500
- Full Simple Chines translation (thanks @atzsmm)
- LeTVRemoteControl, LeTVCamera returned back to ROM.
01 March 2017
* Fixed QuickCharge
* RR update: Upstream merged to LineageOS
* AOSP update: Tag bumped to refs/tags/android-6.0.1_r78
07 March 2017
* Battery optimisation tweeks
* Small fixes
25 March 2017
* Last dev tree updates
* Mokee kernel
16 April 2017 - FINAL BUILD.
* Mokee Kernel with QC 3.0
Are the gapps included or we should flash it?
Enviado desde mi A0001 mediante Tapatalk
arceoxis said:
Are the gapps included or we should flash it?
Enviado desde mi A0001 mediante Tapatalk
Click to expand...
Click to collapse
I think that I didn't flash gapps yesterday but I was very tired maybe I don't remember well
File Download Limit exceeded
Screenshots?
RISHI RAJ said:
File Download Limit exceeded
Click to expand...
Click to collapse
Try this:
To fix this error you simple have to create an account in Yadi.sk. After creating account reopen that link and add that file to your account. After adding to your account go to your files and click that file (which you just added to your account) now click download and download will start without any problem!
Enviado desde mi A0001 mediante Tapatalk
arceoxis said:
Are the gapps included or we should flash it?
Click to expand...
Click to collapse
No, gapps does not included. This is stock ressurection remix rom.
RISHI RAJ said:
File Download Limit exceeded
Click to expand...
Click to collapse
I create mirror on gdisk: https://drive.google.com/open?id=0B-2l1xmYBAzscEZHVWQ1YXkzcE0
Emokah said:
Screenshots?
Click to expand...
Click to collapse
Screenshots +
Thanks for the great rom,As you are an expert Can you do something about Volte,The only thing I miss in this rom
Good job spaciba!!
Yes volte please
Sent from my Le X821 using XDA-Developers Legacy app
I think there is a problem with sound of call is not clear?!
And with hp on it's worth
Please VoLTE enable it in the ROM.
Yes please enable VOLTE. There's already patch available for nougat based ROMs which will enable VOLTE.
Good gob! I'll follow this rom closely.
what happend with accelerometer? with unnofficial cm13 (or lineageos) it works.
I found a bug : fingerprint, completely dead, uninstalled and installed your CM13 and found the same bug .
Now I'm back on 446dev and fingerprints work fast as ever for me.
Oh, how great! A new developer and a new ROM!
Thanks for sharing!
Great job, thank you very much.
All working for me
The fingerprint reader very fast
The camera only allows me an image of max 16 mpx and not the 21 mpx
venezolano69 said:
I found a bug : fingerprint, completely dead
Click to expand...
Click to collapse
Strangely, i test it and it work.
About VoLTE: Guys, first of all we try to fix major bugs (accelerometr, etc) and then try to find the way to enable volte.
BTW, In ru volte working only in Moscow and in test mode only with some operators phone.
j.llorente said:
Good gob! I'll follow this rom closely.
what happend with accelerometer? with unnofficial cm13 (or lineageos) it works.
Click to expand...
Click to collapse
Hm, can you please tell build date where accelerometr work in lineageos? Now it does not work to, we try to fix it.
sdevaux said:
I think there is a problem with sound of call is not clear?!
And with hp on it's worth
Click to expand...
Click to collapse
I also noticed it. Same problem was it november Mokee releases. Add this to ToDo
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available on github : LineageOS Github repo.
Unofficial build of LineageOS 14.1 (Android 7.1.2) for the M2 Note
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it!
*/
Working features:
Hardware acceleration
RIL for SMS/Calls/Internet
GPS
WiFi
Vibration
Audio
Bluetooth / A2DP
MTP and Mass Storage mode
External SD
Camera (Videos & Photos)
Gestures
Gamepads support
All Sensors
Tethering
USB Otg
mBack button!
LiveDisplay (natively)
Power-On Alarms (wakes the device 1m30 before an alarm)
Sdcardfs (default)
Ext4 backported from 3.18 with crypto and lazytime
F2FS latest stable with lazytime
Zram (w/ LZ4 comp.)
Offline-Charging Mode
Signed build (user/release-keys)
Selinux enforcing :fingers-crossed:
Security Patch September 2019
Thanks to Prasenjit Roy for the quick-review video :highfive:
https://www.youtube.com/watch?v=Uy1sVlSeYks
Download:
Build 25 (Stable 9 "PrettyLate") : HERE (Gdrive link)
md5: fadd90ec9ec6dded055231386c7186e2
[lineage] sources updated as of today, includes September 2019 security bulletin
[device] fixed orientation sensor (still works after a week without reboots)
[kernel] upstream updates, small fixes and CVEs
Build 24 (Stable 8 "Late") : Here(temp. Gdrive link)
[lineage] sources updated as of today, includes November 2018 security bulletin
[device] fixed hardware HEVC encoding/decoding, should make some audio/video apps more stable
[kernel] upstream updates, small fixes and CVEs from November '18 for the wifi driver included.
Build 23 (Stable 7 "Spring") :
[lineage] sources updated as of today, includes May 2018 security bulletin
[device] enabling the virtual navbar will now disable the hardware button (for those with a broken buttons <3 )
[kernel] upstream updates, fixed exfat kernel drivers
Build 22 (Stable 6 "M'lady") :
[lineage] sources updated as of today, includes January 2018 security bulletin
[device] lights HAL built from source, leds settings cleaned (battery notification was not on stock rom, the settings were unused), mtk omx settings were fine-tuned (should reduce the lag when playing HQ videos), broken ffmpeg VIDEO (and aac) codecs were removed to keep things tidy.
[storage] encryption AND "formatting an sdcard as internal storage" should now properly work (updated kernel and TWRP)
[kernel] upstream updates, fully upstreamed encryption, ext4, dm, md and sdcardfs drivers, fixed encryption and sd as internal storage for ext4 & f2fs, a few tweaks/cleanup. NFS was reverted from the kernel, CIFS is now built, I'm not sure if I want to build both as NFS might not be used if by any of us, if anyone wants kernel support for NFS, voice yourself.
[blobs] removed a couple unused blobs, updated md_init / nvram_daemon to prevent crashes during modem start/stop/restart and during encryption process.
[doze] doze package was fixed by Dinolek ( hand-wave to wake and co, features) and now works properly
[shim] updated shim for graphic buffers by Dinolek, mtk_agps is now shim-free and was updated to a Nougat blob.
How to report Issues
If you find a bug please check if an exisiting issue is already mentioned and create one with details and logs here : Bug reports @ Github issues
Make sure you fit those criteria first :
Make a backup, do a "Wipe Clean" install
Make sure you don't use MODifications (flash clean, try again)
Check the open/closed issues (most of the problems faced should have a mention about how it was fixed or how to workaround rare bugs)
Check google first, there might already be solutions, there's also "howto" (for making logs, using a different i/o scheduler, etc.. )
Explain and give details, add logs as much as possible (and please take the time to search how to do those tasks, I know most of you are well intentioned when asking "how can I make logs", but you're not helping only me, you're helping yourself and everyone else who might/has the same issue :good: )
Issues
First boot and bluetooth :
NOTE: for those having issues with bluetooth not enabling, you need to actually copy/paste the file :
"/data/nvram/APCFG/APRDEB/BT_Addr" to "/data/", it should look like "/data/BT_Addr".
For some reasons (I couldn't find the definitive solution so far), it seems nvram can't access the "BT_Addr" in nvram and falls back to reading it from /data/BT_Addr (which is just a copy of BT_Addr). Using enforcing makes the nvram_daemon unallowed to create files in /data, which is why you need to copy it yourself. If anyone wants to make a small flashable fix.zip, I'll link it here
First boot and camera :
You can flash from TWRP this little fix : CameraFix-Dinolek-Los14.1.zip (Download section)
Proximity Sensor :
If your proximity sensor doesn't work and/or you have a black screen after hanging a call, you can find a flashable zip named "Mtk-prox.sensor.FIX.v2.zip" under the download section.
Flash this zip will install the small proximity calibration helper written by xen0n (here - thanks to him )
[*] V2: should be automatic on boot/reboot, if not see the note for V1.
[*] V1: Usage is simple, if you need to calibrate your proximity sensor, just open terminal app (you can enable Terminal app in Settings>DevOptions), start the terminal and type :
"meizupshelper c" ( c as in Calibration)
Voilà !
How to install Recovery / TWRP :
Use the recovery linked in the download section of this thread
-> How to install TWRP <- I don't support unlocking bootloader AND installing TWRP, check the corresponding threads :highfive:
How to install G-apps :
LineageOS now recommends these G-apps package : click here, I installed the corresponding package to our rom : "Nougat Base Gapps package for 7.1.2 (arm64)", seems fine so far
Open-Gapps should work too, refer to lineageOS wiki for more infos.
Don't be cruel:
If you want to mirror the rom or port it to another device, go ahead! Just do the right things and give proper credits. Thank you!
XDA:DevDB Information
[Stable] LineageOS-14.1 for Meizu M2 Note [7.1.2], ROM for the Meizu M2 Note
Contributors
Moyster, Fire855
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: 9
Stable Release Date: 2019-09-12
Created 2017-10-21
Last Updated 2019-09-15
Old changelog :
Build 21 (Stable 5 "Santa2note") changelog :
[lineage] sources updated as of today
[device] audio HALs updated to properly support the new bluetooth drivers, and xml audio policies
[rootdir] our octo-core m2note has now properly defined cpusets, as well as a bunch of tweaks/optimisations for smoothness / reactivity and fast app-opening.
[blobs] device specific blobs were all moved to /vendor instead of /system, which allowed to update a few more binaries (like thermal_manager) and figure that ClearMotion is broken and now disabled.
[kernel] see the changelog on github, there's been a lot since last changelog ion/binder/smi/fliper and a lot of drivers were updated, a lot of CVEs were patched, arm optimized crypto algos are now used (for SHA*/chacha20/etc..), NFS is enabled and supported, exfat/f2fs/sdcardfs were updated, some small battery-performance optimizations were merged (shouldn't be that big but still).
Build 19 (Stable 3 "FracturedWaduhek") :
[krack] wpa_supplicant fix in lineage source and kernel fixes
[device] updated MeizuDoze and CMActions (gesture implementation)
[sepolicy] cleanup and fix a few more denials
[security] hardened kernel config, extra entropy gather during boot,
[kernel] upstream f2fs updates, zram/zsmalloc drivers from 4.1 kernel
[misc] cleaned unused services/props
Build 18 (Stable 2 "Ruhr") changelog :
[backport] kernel backported uid_sys_stats, binder from 4.9
[camera] might not be new, but HDR is back since a few releases
[charger] switched to AOSP/Lineage charger (using healthd) / remove mediatek charger (kpoc_charger)
[config] added gps.conf to remove a few warnings, newer SPNs (from MAD and leskal)
[device] cleaned unused props and settings
[drivers] kernel libvsprintf, vmstat, fiq_debugger, f2fs, sdcardfs, ion, maxx77819(charger driver), fsync, LowMemoryKiller driver cleanup, fix and updates; removed mlog drivers, less debug/xlog/aee/custom code from mediatek, removed logspam from most mediatek drivers
[flaw] BlueBorne fixed (android & kernel)
[fs] ntfs & exfat kernel native drivers
[gamepad] xbox360-one / usb gamepad support (using an OTG cable, you can navigate / open apps, play games, etc..)
[gapps] fixed TrustedFace (unlock with your front camera should work now, thanks to MAD team)
[gps] GPS drivers from N, GPS binaries from N, properly reworked AGPS shim
[kernel] kernel upstream fixes and CVEs corrections, bug squashing and improvements (a problematic/spammy backtrace finally was fixed in task_mmu, meizu battery logs were removed, check and delete this file : /data/fuelgauge_datalog.txt to gain some free space in /data), code sanity updates (moving to __FUNCTION__ > __func__, no more seq_printf (increases overall security))
[misc] blob removed unused libs (libjtranscode), removed kpoc_charger, libshowlogo
[os] Android Security Bulletin to September 2017
[permission] added SIP permissions (should enable SIP if available)
[power] powerHAL made compatible for passthrough HIDL design
[ril] readded REFRESH_SESSION_RESET
[sepolicy] cleanup unused rules (mdlog, fuelgauge_data_file), fixed a few denials
[shim] libshim cleaned, removed libshim_asc and the AndroidSurfaceControl symbols
[rootdir] clean, rebased init files, added path for e/frandom to uevent
[vendor] Mediatek security fixes up to September 2017, kernel various mediatek bugfixes and memleaks fixed (backported to 3.10 from Mediatek 3.18 maintained kernel)
Build 17 (Stable 1.1 "Arewederyet") changelog :
[android] Security Bulletin from "5 August 2017"
[kernel] cmdq, gud, smi, ext4 drivers update & a bunch of CVEs
[lineage] rebased to latest sources up to 12/08/17
Build 16 (Stable 1 "XmasisSoon") changelog :
[kernel] updated 3.10.106 -> 3.10.107 & additional CVEs
[lineage] Security Bulletin from "5 july 2017"
[misc] smaller tweaks and fixes (sepolicy & doze)
Build 15 (RC 5 "Summertime") changelog :
[kernel] updated 3.10.105 -> 3.10.106
[lineage] Security Bulletin from "5 june 2017"
[device] smaller tweaks and fixes (sepolicy & initramfs)
[hotspot] Works natively (without editing build.prop )
Build 14 (RC 4 "Proxima") changelog :
[camera] fixed a couple bugs, exposure, white-balance, brightness/contrast settings should work properly, better picture quality (still missing HDR, for reasons)
[video-recorder] fix a bug where recording with the flash on crashed, video recording is not extra dark anymore
[netd] properly supporting firewalls / iptables rules / per app restrictions :highfive:
[kernel] netfilter rules cleaned, less latency, now using "cubic" as tcp congestion algorithm (faster internet)
[kernel²] includes every modifications/fixes done during the "kernel tests release" (memory management fixed, ext4&f2fs security&performance update, optimised FS mount flags (incl. lazytime))
[lineage] rebased sources as of today "5 june 2017" ~3pm
[misc] small cleanups/improvements
Build 13 (RC 3 "Datupdat") changelog :
[bluetooth] config update
[kernel] new drivers (uid_sys_stat, mlog, some mtk drivers fixes), f2fs updates, net updates, now using MEMCG instead of kernel LMK, more CVEs fixed, reworked config, and various small tweaks/updates.
[lineage] latest sources from los, note: they moved from Gello to Jelly (a lighter/easier to maintain browser)
[misc] small fixes for sepolicy / device tree (f2fs fstab support)
[sdcardfs] moar fixes!
Build 12 (RC 2 "ICanHazSpeed") changelog :
[omx] omx blobs and some camera-related blobs were updated, should work a bit better and give a better picture quality
[bluetooth] now using N omx blobs
[kernel] security updates, performance tweaks, net/wifi should connect faster.
[scheduler] changed from "deadline" to "bfq" as default
[performance] io scheduler and readahead values tweaked for boot / boot complete (faster boot, better UI fluidity)
[sdcardfs] moar fixes!
[security] A whole new Sepolicy to finally get rid of the small little bugs (touch unresponsive, etc...)
Build 11 (RC 1 "Anougat") changelog :
[release] Builds have reached the "Release Candidate" state, any feedback for broken features (things working before this build) is welcomed !
[gps] mtk agpsd crash fixed (should stop some battery drain/bug)
[kernel] security updates, stability updates, cleanup
[power] fixed "energy saver mode", device won't crash by enabling then disabling it
[sdcardfs] fixed mismerge, downloading files larger than 40mb works
[security] Selinux policy fixed, Selinux is now using "enforcing" mode :highfive:
Build 10 (Beta 10 "AnewFone") changelog :
[alarm] Power Off Alarms fixed (phone turned off will wake 1 minute and a half before any alarm defined )
[android] lineage rebased to 7.1.2_r2 :highfive:
[blobs] latest modems and blobs from Flyme6
[camera] for real this time, no more "camera fix" to flash :fingers-crossed:
[gapps] LineageOS now recommends these G-apps package : click here, I installed the corresponding package to our rom : "Nougat Base Gapps package for 7.1.2 (arm64)", seems fine so far
[kernel] a lot of updates / cleanup / fixes (including most of the recent security fixes)
[overlays] various fixes/cleanup
[PinnerService] pinned correctly some frameworks, should improve a bit performance
[sdcardfs] enabled by default, better performance for both internal storage and sdcards (should also fix permissions errors during copy)
[selinux] some sepolicy denials fix / cleanup
[shim] now using force_shim_lib instead of removing cap_sys_nice on surfaceflinger
[*][f2fs] experimental: the rom should support f2fs, untested feature, take caution (not enabled by default, requires formating partitions to f2fs in twrp, I don't know if the twrp we use supports it correctly)
see here : https://github.com/Moyster/nougat_device_meizu_m2note/blob/los-14.1/rootdir/fstab.mt6735
f2fs allowed on /userdata and /cache partitions, improvements unknown
Build 9 (Beta 9 "Joke'sOnYou") changelog :
[camera] no more patch required, proper release
[video-recording] fixed a bug who crashed the camera if recording a video longer than 24sec
Build 8 (Beta 8 "StillNoJoke") changelog :
same as build 7
[omx] N omx blobs, fixes a lot of issues regarding A/V (Snapchat works )
[camera] no more legacy hal flag, more secure :highfive:
[wifi] hidden wifi should work
Build 7 (Beta 7 "IsNoJoke") changelog :
[kernel] global updates, performance, security (CVEs), sdcardFS/F2FS fixes, backported driver from 3.18 (Wifi / Gps / Bluetooth)
[proximity-sensor] should be fixed, uploaded a v2 that should apply on reboot automatically (added sepolicy, thanks to divis1969 & KevinMX for testing/fixing this)
[rom] lineage update
Build 6 (Beta 6 "BreathOfTheWild") changelog :
[android] LineageOS rebase to 7.1.1_r25 (March Security Bulletin)
[kernel] CVEs from March 2017 Sec Bulletin, more sdcardFS fixes
[hotspot] reverted to working state
Build 5 (Beta 5 "Damerge") changelog :
[android] LineageOS rebase to 7.1.1_r21 (05/02/17 security patch)
[sdcard] kernel/rom now supports "sdcardFS" but not used by default
[kernel] more security updates (more CVEs from february 2017 patch), kernel updated to 3.10.105
[misc] updates / cleanup / various little things
Build 4 (Beta 4 "Ixemo") changelog :
[netd] Data Counting fixed
[kernel] security updates (some CVEs from february 2017 patch)
[device] blobs update with native Nougat blobs
[shim] sensors are now shimmed (less patches on android sources)
[OMX] Cleanup (should fix a few crashes)
Build 3 (Beta 3 "Kameha") changelog :
[camera] touch to focus is fixed
[recording] 720p profile should be working properly now
[device] blobs cleanup / some camera blobs were updated from Flyme 6.7.1.17
[shim] audio is now shimmed (less patches on android sources)
[OMX] FLAC is now working
Build 2 (Beta 2 "Ohemix") changelog :
[perf] performance and battery should feel noticeably better
[kernel] some drivers were updated
[device] services / blobs cleanup, more free ram
[shim] libmtk_symbols was turned into a shim lib, symbols trimmed to only what's needed.
[OMX] fully working, no more legacy support, no additional package to flash, stability improvements (no more mp3 crashes)
[OCM] Offline charging mode fully working, it displays the battery charge and puts the screen to sleep after timeout
[bonus] Google Assistant trick ( ro.opa.eligible_product=true) added for easier G-assistant activation
Build 1 (Beta 1 "GOFALCONS") changelog :
Initial release
Bring-up basic functionalities
First !
Thanks a lot Moyster !
this is great! ??
Download:
Build 19 (Stable 3 "FracturedWaduhek") : Here
[krack] wpa_supplicant fix in lineage source and kernel fixes
[device] updated MeizuDoze and CMActions (gesture implementation)
[sepolicy] cleanup and fix a few more denials
[security] hardened kernel config, extra entropy gather during boot,
[kernel] upstream f2fs updates, zram/zsmalloc drivers from 4.1 kernel
[misc] cleaned unused services/props
Enjoy
wow.. thanks for the update ..
Everything is going well the last update feels faster than build 18 ? thanks
thank you very much
Stable ? and fast.. Everything great.. Anyway the proximity fix doesn't work..
camera fix
what about camera , he work in new beta 19, with the new zip flash file?
Hi, thanks for the update, but I can't root it flashing the v2.79 SuperSu zip. I've also tried with v2.82 but with the same result. How can I root it?
Edit: ok flashed Magisk and no problems. Everything is working fine.
Thanks a lot for the update @Moyster,please update the twrp recovery so that it will work for all users,for me it doesnt work, it cant clean up cache or system and i end up with broken partition.
Alucard said:
Thanks a lot for the update @Moyster,please update the twrp recovery so that it will work for all users,for me it doesnt work, it cant clean up cache or system and i end up with broken partition.
Click to expand...
Click to collapse
i use the twrp 3.1.1 ，when you wipe cacher and system,you should to waite about ten minites,it will be work[COLOR="Silver"[COLOR="Silver"]
---------- Post added at 04:19 PM ---------- Previous post was at 04:16 PM ----------
[/COLOR]thanks to update.
i find the charging animation is reversed when shutting down the phone to charge
what a good job we thank you for all your great monster effort
My first go at installing a custom ROM. Took a backup. Crossing fingers. Thanks for this!
zty915 said:
i use the twrp 3.1.1 ，when you wipe cacher and system,you should to waite about ten minites,it will be work[COLOR="Silver"[COLOR="Silver"]
---------- Post added at 04:19 PM ---------- Previous post was at 04:16 PM ----------
[/COLOR]thanks to update.
i find the charging animation is reversed when shutting down the phone to charge
Click to expand...
Click to collapse
Oh i didnt wait that long,but with older twrp recoveries there is no such issue,i think its a lot of time to wipe partitions and must be fixed but thats up to the developer ,im just hopig he will see my request.
Alucard said:
Oh i didnt wait that long,but with older twrp recoveries there is no such issue,i think its a lot of time to wipe partitions and must be fixed but thats up to the developer ,im just hopig he will see my request.
Click to expand...
Click to collapse
Go to settings in twrp and check the "use rm instead of formatting" it will format instantly
My flash failed
Trying to flash lineage-14.1-20171021-UNOFFICIAL-m2note.zip' onto my phone for the first time (had Flyme this morning).
Code:
I:operation_start: 'Flashing'
Installing zip file '/extSdCard/lineage-14.1-20171021-UNOFFICIAL-m2note.zip'
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Zip does not contain SELinux file_contexts file in its root.
I:Legacy property environment initialized.
Target: Meizu/lineage_m2note/m2note:7.1.2/NJH47F/1a8158dae2:user/release-keys
Target: Meizu/lineage_m2note/m2note:7.1.2/NJH47F/1a8158dae2:user/release-keys
could not detect filesystem for /dev/block/platform/mtk-msdc.0/11230000.MSDC0/by-name/system, assuming ext4
could not detect filesystem for /dev/block/platform/mtk-msdc.0/11230000.MSDC0/by-name/system, assuming ext4
mount: failed to mount /dev/block/platform/mtk-msdc.0/11230000.MSDC0/by-name/system at /system: No such file or directory
mount: failed to mount /dev/block/platform/mtk-msdc.0/11230000.MSDC0/by-name/system at /system: No such file or directory
about to run program [/tmp/install/bin/backuptool.sh] with 2 args
run_program: child exited with status 127
unmount of /system failed; no such volume
unmount of /system failed; no such volume
about to run program [/tmp/install/bin/otasigcheck.sh] with 1 args
Patching system image unconditionally...
performing update
Patching system image unconditionally...
open "/dev/block/platform/mtk-msdc.0/11230000.MSDC0/by-name/system" failed: No such file or directory
script aborted: E1001: Failed to update system image.
E1001: Failed to update system image.
E:unknown command [log]
Updater process ended with ERROR: 7
I:Legacy property environment disabled.
Error installing zip file '/extSdCard/lineage-14.1-20171021-UNOFFICIAL-m2note.zip'
Updating partition details...
I:Data backup size is 0MB, free: 8661MB.
I:Unable to mount '/usb-otg'
I:Actual block device: '', current file system: 'auto'
...done
I:Set page: 'flash_done'
Any ideas?
EDIT: Seems to be the same problem as https://forum.xda-developers.com/showpost.php?p=74046296&postcount=1308, so I applied the same solution. Seems to have worked... still waiting for first time boot...
numpea said:
Go to settings in twrp and check the "use rm instead of formatting" it will format instantly
Click to expand...
Click to collapse
Thanks i ll try,what does this option do,is it another way of formatting?
eduardo579 said:
Hi, thanks for the update, but I can't root it flashing the v2.79 SuperSu zip. I've also tried with v2.82 but with the same result. How can I root it?
Edit: ok flashed Magisk and no problems. Everything is working fine.
Click to expand...
Click to collapse
I had the same problem > thanks for the Magisk tip > now i'm rooted
All works fine!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Galaxy A3 2016 | a3xelte | SM-A310xx
UNOFFICIAL | Android 8.1
Download: HERE
Changelog:
Code:
[COLOR="Red"]FINAL BUILD[/COLOR]
[COLOR="Teal"]2019-03-23[/COLOR]
- Updated Bluetooth firmware from Raspberry Pi 3
- Regenerated the manifest.xml
- March Security Patch
- Improved battery life by using a better configuration for cpusets (thanks to @alexax66)
- ION Fixes in the Kernel
- Ramdisk: Added one (missing) blob to mobicore startup
- Ramdisk: Fixed up permissions for charging
- Ramdisk: Add more permissions for WiFi
- Much other Ramdisk cleanups and improvements (you can see the full changes on my GitLab)
[COLOR="Teal"]2019-03-05[/COLOR]
- Kernel Android Binder upstream to fix errors (thanks to [user=6707196]@danwood76[/user])
- Use older stock build fingerprints again to reestinate google play certification
[COLOR="Teal"]2019-03-03[/COLOR]
- [WIP] Kernel Android Binder upstream to fix errors (thanks to [user=6707196]@danwood76[/user])
- Regenerated manifest
- Updated stock build fingerprints
- Added OMX HAL
- Updated wpa_supplicant_overlay from stock
[COLOR="Teal"]2019-02-24[/COLOR]
- Kernel ION fixes to resolve very rarely happened SystemUI crashes (thanks to [user=6707196]@danwood76[/user])
- Kernel MTP fixes to resolve all issues related to USB file transfer (thanks to [user=6707196]@danwood76[/user])
[COLOR="Teal"]2019-02-06[/COLOR]
- Upstreamed new Kernel again from v3.10.61 to 3.10.108 for enhanced security and performance
- Fixed audio recording issue by not allowing to record with a bitrate below 48000 in the audio policy
- Updated stock vendor blobs from CRG2 to CRH1 for better security and stability (this time it mostly improved GPS)
[COLOR="Teal"]2019-01-23[/COLOR]
- Removed unused soundtrigger HAL
- Added aptXHD blob for better audio quality via Bluetooth
- Remove permissions of unsupported Hardware
- Use LE media codecs for better battery life and less heat production while watching Videos
- Fix libexynoscamera.so entry in propietary-files
[COLOR="Teal"]2019-01-14[/COLOR]
- Faster NFC turn on
- Camera shouldn't crash anymore by fixing the camera wrapper
- Updated WiFi driver from the latest A5 2016 release bacause of battery drain with the driver from the A3 2017
- Fixed battery health save/restore (battery level changing on reboot)
- Completely new kernel based on the latest A5 2016 nougat release instead of the old Galaxy J5 with Android Lollipop
- Switched back to 4 core kernel because of overheating and huge battery drain (and to be honest - you dont really notice the performance difference between 8 and 4 cores, especially after this update)
- Fixed delayed torch in the camera wrapper
- Battery performance improved alot
In general this is the biggest dotOS updates of all with numerous improvements that don't fit all in here ;). Credits go to Stricted and danwood76 who worked on this hard since months!
[COLOR="Teal"]2018-11-30[/COLOR]
- Fixed Bluetooth calling (probably with all profiles, thanks to danwood76)
- Reduced battery drainage by lowering the cores for background services and increasing them for system background services
- Added a cpuset for the camera-daemon in the ramdisk
[COLOR="Teal"]2018-11-27[/COLOR]
- Kernel: Added temperature depending GPU control interface (thanks to alexax66)
- Kernel: Fix power suspend issue
- Kernel: More detailed debugging
[COLOR="Teal"]2018-11-20[/COLOR]
- Binderized bluetooth
- AOSP Oreo release 51
[COLOR="Teal"]2018-11-18[/COLOR]
- November security patch (android-8.1.0_r50)
- Added NFC signatures that could be useful for some payment apps to work
- Kernel: created sysfs to control MIN & MAX battery capacity charge levels
- Updated vendor blobs from CRG2 to CRK1
[COLOR="Teal"]2018-11-13[/COLOR]
- Fixed gps.xml path for better accuracity (thanks to alexax66)
- Defined all 8 cores in the device tree
- Smarter usage of both clusters
- Don't compile mcDriverDaemon in mobicore because it got removed from the vendor some time ago as its unnecessary
[COLOR="Teal"]2018-11-10[/COLOR]
- New octa core kernel
- Fixed bluetooth calls (thanks to the main a3xeltexx device tree maintainer danwood76)
- Fixed hotspot
- Stock camera deadlock issue is fixed now properly in vendor
- Use much faster ZSTD zswap compression in kernel
- Many kernel related fixes and upstreams to higher versions (performance & security)
- AMOLED burn-in protection enabled in overlay
- Many device tree fixes
[COLOR="Teal"]2018-10-21[/COLOR]
- Video recording fixed
[COLOR="Teal"]2018-10-12[/COLOR]
- Switched completely back to stock power HAL because of bugs while playing music in standby and crashing GApps
- Enabled touchkey light control in the overlay (brightness setting isn't supported although)
[COLOR="Teal"]2018-10-11[/COLOR]
- Little battery improvement by editing power profiles
- Corrected GPU clock values in the new power HAL
- GPS tweaks
- Removed false power configs
- Prefered network type selection is working now
[COLOR="Teal"]2018-10-10[/COLOR]
- Inital release
- Removed false ramdisk (init.target.rc) permissions and added important ones
- Improved HIDL based power HAL
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Click to expand...
Click to collapse
Installation instructions:
1. Make sure you have TWRP installed on your device to be able to flash the rom.
2. Download the latest build from the link above and copy it to a place where you can find it later.
3. Optionally download GApps for using the Play Store and other Google related services from here: https://opengapps.org. Choose ARM as architecture and 8.1 as the OS version. The size of the GApps package is upon to you how much apps you want to have preinstalled. Copy this zip aswell to a place where you can find it easy later. If you download it with Chrome or with the Google Drive App it should be by default in the Download folder.
4. Turn your phone off and press Volume UP + Home Button + Power button at the same time until the splash screen appears. Then your device should boot into the recovery. There you wipe following partitions: Data, System, Cache, Dalvik if this is your first install. All of your installed applications get lost by this. Your photos, videos etc. won't get deleted if you haven't ticked the box for internal storage. As the kernel also supports F2FS i would change the filesystem for the cache partition from ext4 to f2fs for a better system performance. Now go to the main TWRP menu, click on install and go to the place where you have placed your zips and first select the rom and then click on the left button if you have downloaded the optional GApps package to add another zip to the queue. Now swipe the slider at the bottom to install and reboot the phone to the system. The first boot can take a while and after booting you could experience some lags because of the GApps initialization but they should disappear after some time.
4. Now you have successfully installed the rom and you're ready to use dotOS on your device. Congratulations!
Bugs:
- VoLTE (isn't working on samsung devices and won't work anytime in the future too)
- Same as LineageOS 15.1
Credits:
@bunnyy for helping me to bring up dotOS on the A3 2016
@danwood76 for maintaining the a3xelte device tree
@Stricted for maintaining the common device tree
Contributors:
@Borduni
Source Code:
https://gitlab.com/dariotrombello
https://github.com/DotOS
https://gitlab.com/Exynos7580
Version Information
Android: 8.1 Oreo
Kernel: Linux 3.10.108
Status: Stable
Stable Release Date: 2018-10-10
Created: 2018-10-10
Last Updated: 2019-03-23
I've created a new Exynos 7580 Discord because the old one from the Lineage 15.1 project got deleted. I regularly share testing builds here. Join if you want . If you have any questions or problems with the ROM, write them also there.
https://discord.gg/TEfC5hA
God job, thanks.
Okay as i got some issues reported i need to switch the power hal to stock again :/
I found bug with google camera app, when trying to record a video app crashes.
Yes i'm currently working on a fix
Borduni said:
Yes i'm currently working on a fix
Click to expand...
Click to collapse
Alright then!
One more thing: There is a problem with low bitrate audio when recording video on 3rd party apps.
Thanks for developer, this rom is lite, I hope that the ROM will develop even better.
Wow, i was really waiting for this port. Battery life is much better than any of AOSP projects. GJ and big thank you for porting and fixing it.
Found issue of low mic in telegram, whatsupp and etc. danwood76 spent a lot of time trying to solve it and he DID it.
Don't know maybe this information will be helpful for you and maybe he will tell u how easily to fix it.
Vittario Vicci said:
Found issue of low mic in telegram, whatsupp and etc. danwood76 spent a lot of time trying to solve it and he DID it.
Don't know maybe this information will be helpful for you and maybe he will tell u how easily to fix it.
Click to expand...
Click to collapse
Did he solved low bitrate audio problem already?
Vittario Vicci said:
Found issue of low mic in telegram, whatsupp and etc. danwood76 spent a lot of time trying to solve it and he DID it.
Don't know maybe this information will be helpful for you and maybe he will tell u how easily to fix it.
Click to expand...
Click to collapse
@Borduni is using a fork of my lineageos device tree so my modification to the mixer levels should already be included in his ROM.
Maybe there is a recording volume setting within DotOS that is causing the issue or maybe it uses a different mixer path?
danwood76 said:
@Borduni is using a fork of my lineageos device tree so my modification to the mixer levels should already be included in his ROM.
Maybe there is a recording volume setting within DotOS that is causing the issue or maybe it uses a different mixer path?
Click to expand...
Click to collapse
Yep, that was my mistake, mic level is ok
Vittario Vicci said:
Yep, that was my mistake, mic level is ok
Click to expand...
Click to collapse
Yes mic volume is ok, but in apps (eg. Snapchat) there is problem with low bitrate audio, same on danwood's ROM.
Can't confirm. Made some tests and it should be snapchat that is making the audio worse. For me everything is fine with other apps.
If you are facing any performance/battery issues or ui glitches like the status bar isnt working or the list of the latest opened apps isnt displaying i'll suggest you to wipe data, system, cache and dalvik before installing the newest build. The UI should be pretty fluid if you did it like that .
Borduni said:
Can't confirm. Made some tests and it should be snapchat that is making the audio worse. For me everything is fine with other apps.
Click to expand...
Click to collapse
It's strange because on my phone problem occurs on snapchat and other 3rd party apps. Camera app audio working great.
the system has become too slow with this update !!!
chevalier99 said:
the system has become too slow with this update !!!
Click to expand...
Click to collapse
Format system, data, cache and dalvik again
Borduni said:
Format system, data, cache and dalvik again
Click to expand...
Click to collapse
cache and dalvik only and it's ok.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features
Click for feature list
Always Have a full functional Backup. Just in case!
GAPPS | MICROG | Vanilla
Useful Links:
Magisk
Orange Fox
Logcat Reader
Installation Order:
> Flash / Sideload
> Reboot to Recovery
> Format (optional)
[OR]
Install it directly from fastboot if you have issues with sideloading
Don't expect any support if you:
- are not running the included kernel
- have installed any crazy mods !
- have modified system files
Thanks to:
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
Contributors:
@ZIDAN44
@TheMalachite
@gwolfu
@mukesh22584
@adi153
XDAevDB Information
Source Code: https://github.com/crdroidandroid
Kernel Source Tree: xiaomi-sdm678 / android_kernel_xiaomi_mojito
ROM OS Version: Android 11
Based On: LineageOS
SMASH THE LIKE & SHOW YOUR APPRECIATION
Highlights & Device Specific Changes:
Maintainer: Anush Madathumkara
Build type: Monthly
==== 17 December, 2021 ====
- Based on Latest WCSF Kernel
- Fixed Widevine L1
- Fixed random systemui crashes on Widevine L1
- mojito: overlay: set CPU temperature paths
- mojito: overlay: reduce rounded statusbar corner padding
- sm6150-common:Build libgui and its vendor version
- sm6150-common:sepolicy: fix Widevine DRM
- sm6150-common:Add a missing media blob from stock
- sm6150-common:Add missing DRM blobs from stock
==== 17 November, 2021 ====
- Based on Rebased WCSF Kernel
- Fixed some partition related issues (Now flashable via OFRP)
- sm6150-common: Build atrace 1.0 service hals
- sm6150-common: rootdir: Remove enable-low-power trigger from recovery
- sm6150-common: rootdir: Allow all filesystems for USB-OTG
- sm6150-common: prop: Disable sf EGL image tracking
- sm6150-common: Kill kernel cmdline console parameters
- sm6150-common: wifi: Disable wifi packet logging
- sm6150-common: configs: power: Remove pixel audio hints
- sm6150-common: overlay: Disable global mode and CDMA choices
- sm6150-common: overlay: Allow seamless Doze state transitions
- sm6150-common: rootdir: Chown drv8846_dev & akm09970 camera nodes
- sm6150-common: prop: Switch to Codec2 by default
- sm6150-common: prop: Disable Codec2 input surface
- sm6150-common: parts: Add drawable icon for AOD
- sm6150-common: sepolicy: Address virtual AB OTA denies
- sm6150-common: Set NUM_FRAMEBUFFER_SURFACE_BUFFERS to 3
- sm6150-common:Kang HWUI props from stock mojito qssi-user 11 RKQ1.201022.002 V12.5.3.0.RKGMIXM release-keys
- sm6150-common:Add 300Mhz scaling_min_freq for CPUBigClusterMinFreq and CPULittleClusterMinFreq
- sm6150-common: BoardConfig: Drop graphics layer memory buffer
- sm6150-common:Add HDR & WCG Flags
- sm6150-common: Do not use phase offsets as duration.
- sm6150-common: prop: Fix screenrecord lag
- sm6150-common: Define [email protected] into FCM
- mojito: Update to Redfin November FP
- Improved Stability && performance
- 1080p Youtube playback issue addressed (FWIP)
==== 27 October, 2021 ====
- Upated WCS kernel
- Raised reserved partitions to support for improving gapps support
- sm6150-common: Disable partial FB excl rect
Highlights & Device Specific Changes:
Maintainer: Prince Cooper (Discontinued)
Build type: Monthly
==== 01 October, 2021 ====
- Fixed Slow charging
- Fixed camera color shift
- Moved to TWRP (due to ofox kernel issues)
- Allow all filesystems for USB-OTG
- Don't check prox before pulsing
==== 27 September, 2021 ====
- Moved to armv8-2a
- OrangeFox Recovery preincluded
- Added Battery Health Stats
- Added camera cutout notch
- Added XiaomiParts (Dirac, Clear Speaker & Thermal Profiles)
- Added color modes
- Updated blobs from V12.5.3.0.RKGMIXM
- Drop ANX/MiuiCam support for now
- Improved Haptic Feedback
- Fixed Google Backup/Restore
- Fixed FMRadio
- Fixed WFD/Cast
- Fixed LDAC & AptxHD
- Replaced PlayStore with Aurora Store in microg variant
- Smarter decisions on whether to use 2/5Ghz AP
- Updated device cutout corners
- Disabled wifi firmware logging
- Fixed whatsapp mic delay or crashes
- More Smooth AF
==== 21 August, 2021 ====
- Fixed OKGoogle Detection
- Fixed CPU Thermal Info
- Fixed Document Mode
- Added Clone Shots (miuicam)
- Added Smart Charging
- Added Burn-in Protection
- Added Smart Pixels
- Brought back TWRP
==== 09 August, 2021 ====
- crDroid 7.9 upstream
- August patch merged
- mojito: TWRP drop due to instability
- mojito: Bluetooth AAC codec Fixed
- mojito: Wired headset volume buttons fixed
- mojito: ANXCam replaced with MiuiCam port
- mojito: Fastbootd added to Power Menu
- mojito: DavikHeap fixed for 4gb variants
- Revamped Dialer dark theming
- Updated native services for better FPS (to be tested)
- Fixed new message compose with stock Messaging app
- Removed blur additional changes to fix blur glitches
- Added option to disable pill (crdroid > UI)
- Added customization for rounded corners (crdroid > UI)
- Enabled cached app freezer
- Various under the hood updates and misc fixes
==== 16 July, 2021 ====
- crDroid 7.8 upstream
- July security patch
- Increased system size
- Pre-included TWRP
- Included ANXCam 185R
- Fixed Cam AV sync bugs
- Quickstep Blur fixes
- Fix media playback issues
- Fixed VolumeDialog animation when ringer and notification are unlinked
- Power menu UI customizations
==== 08 June, 2021 ====
- Recovery ROMs from now
- Vanilla Variant discontinued
- Latest Firmware Mandatory
- Added Gboard Lite
- Removed MiXplorer Apps
- Less frequent camcorder audio bug
==== 03 June, 2021 ====
- Home crash fixed
- Added stock terminal, AudioFX
- LOS Recovery resolution to native
- VANILLA / GAPPS variants included
- SafetyNet Pass (No fix needed)
==== 24 May, 2021 ====
- Fastboot ROM.
- Weather Provider fixed
- Added Custom Headers
- Video Recording Stutter fixed (can be random)
- Samsung UI audio implemented
- Added Gboard, Via & FMRadio (won't work until we get OSS Vendor)
- Removed substitute apps, improved response time, much more
==== 20 May, 2021 ====
- Initial Build
- May security patch
- Removed some stock apps
- Added QuickPic Gallery
Hello,
¿Is there a app radio FM?
Thanks
Amazing Rom, thanks
uranoscopus said:
Hello,
¿Is there a app radio FM?
Thanks
Click to expand...
Click to collapse
Nop. Will include in the next build.
MPK99 said:
Nop. Will include in the next build.
Click to expand...
Click to collapse
thanks!!!
I see from the filename it's a vanilla version without Gapps.
Does it have signature spoofing already for use of microG?
UniNick said:
I see from the filename it's a vanilla version without Gapps.
Does it have signature spoofing already for use of microG?
Click to expand...
Click to collapse
I'm really happy to see crDroid now on the Redmi Note 10 - I used crDroid already on 2 other phones and in my opinion it's the best custom ROM!
This first build is already excellent, with all the customisation features and only the above mentioned, few bugs.
For use with microG however it shares the similar (but not the same) problems I encountered with dotOS:
- all of my banking apps don't work (with dotOS 2 of 3 worked).
- DHL parcel, Wolt, Flightradar24 etc report problems with missing play services and force close or don't show maps (same in dotOS).
- Uber app works (it doesn't with dotOS).
I tried it also with Gapps now (NikGapps Core Version), flashed via ADB sideload.
Situation a bit better than with microG.
DHL parcel, Wolt etc work now with the Google Maps Interface.
Two banking apps still making problems and complaining about modified operating system.
This doesn't happen with EvolutionX 5.7 ROM for Redmi Note 10, there all banking apps work.
UniNick said:
This doesn't happen with EvolutionX 5.7 ROM for Redmi Note 10, there all banking apps work.
Click to expand...
Click to collapse
It's bcaz evox is not vanilla, it comes with gapps, so play store certification exists.
You know even dotos vanilla had same problems.
Use GApps roms for hazzle free banking experience.
Can I use microg with it ?
suku.incognito said:
Can I use microg with it ?
Click to expand...
Click to collapse
yes
Good ROM. There are minor bugs:
- red border when unlocking the screen
- the screen does not always light up when there is an incoming call
ups2k said:
Good ROM. There are minor bugs:
- red border when unlocking the screen
- the screen does not always light up when there is an incoming call
Click to expand...
Click to collapse
1. Red border is an animation from crdroid home launcher. I can't do anything bout it
2. Reconfigure the Default "Phone" app to dialer.
I've just flashed this rom, WiFi can't be turned on even after I flash the latest firmware, any help please? Or I have to flash the rom again?
Edit: Maybe there's a problem with TWRP, I switched back to lineage recovery and it works fine now.
duc3503 said:
I've just flashed this rom, WiFi can't be turned on even after I flash the latest firmware, any help please? Or I have to flash the rom again?
Edit: Maybe there's a problem with TWRP, I switched back to lineage recovery and it works fine now.
Click to expand...
Click to collapse
It's a fastboot rom, follow instructions carefully & it'll work.
MPK99 said:
I didn't adress anyone to flash firmware. It's pre-included ¯\_(ツ)_/¯
It's a fastboot rom, follow instructions carefully & it'll work.
Click to expand...
Click to collapse
Thanks sir, great rom so far. Will the gapps build arrive soon?
hello,
when you say "• Added Gboard, Via & FMRadio (won't work until we get OSS Vendor)"
the FM radio is ok?, can i listen it?
thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SpiceOS is a free, community built, aftermarket firmware distribution of Android 13 (T), which is designed to increase performance and reliability over stock Android for your device.
SpiceOS is based on the Android Open Source Project(AOSP) with extra contributions from many people within the Mallu Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps).
Kernel source code: xiaomi-sdm678/android_kernel_xiaomi_mojito
Our Source code is available in the SpiceOS Github repo
Working:
Camera (and flashlight)
WiFi
Battery LED
Bluetooth
Telephony (Calls and Data)
Audio (Record and Playback)
Video Playback
Sensors
Broken:
You tell me whats broken with logs
Click Here
Compatibility:Redmi Note 10 (mojito/sunny)
Download links
Notice:
No custom kernels are supported in this thread. Only stock kernel and official builds will be supported. No bug reports if that's not the case.
Installation:
First Time Installation:
* Backup before you begin
* Reboot to TWRP-based recovery / Ofox
* Clean Flash (Via adb sideload / via sd card)
* Reboot to recovery after switching slot (For flashing gapps).(If needed). // No Need as on Alpha gapps are pre-included
* Reboot
Update Installation:
Will be revealed Later
Important notes:
* Required * firmware version must be based on latest MIUI builds.
GApps can only be flashed on clean installs.
Formatting data (all user data is wiped, including internal storage) is a must if Stockrom was previously installed and device was encrypted.
Telegram Community
LineageOS team
AOSP
SpiceOS Community
CrDroid
AOSPA
Pixel Experience
BlissROM
AOSP Extended
Arrow OS
==== 27 Aug, 2022 ====
Changelogs:-
+ First Initial Build
+ No Encryption
+ Has pre-included minimal gapps for now
+ Enforcing userdebug build
Screenshots :- https://t.me/Redminote10channel/181
Thank you for the release, will try it soon and report any issues I find.
So far two minor issues and one bigger:
1. fingerprint indicator is misplaced
2. UW and M lenses are unavailable (tested with Gcam go by Shamim)
3. My banking apps refuse to work even though YASNAC says PASS and PASS - maybe because of encryption?
Otherwise the ROM is stable so far and has no major issues.
Great Job!!!!
Running Android 13 so early will be amazing haha
will try ASAP
kudos to be the first... (at xda )
==== 28 Aug, 2022 ====
ALPHA 2
Changelogs:-
+ Fixed Encryption
+ Has pre-included minimal gapps
+ Fixed side FP indication
1 bug: Broken copypaste function. Copypaste panel doesn't appears, when you select any word/words. You must "select" text again. Related only to System Webview apps.
Strange, bug gone
2 bug: It is not possible to remove search widget.
Anush02198 said:
SpiceOS is a free, community built, aftermarket firmware distribution of Android 13 (T), which is designed to increase performance and reliability over stock Android for your device.
SpiceOS is based on the Android Open Source Project(AOSP) with extra contributions from many people within the Mallu Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps).
Kernel source code: xiaomi-sdm678/android_kernel_xiaomi_mojito
Our Source code is available in the SpiceOS Github repo
Working:
Camera (and flashlight)
WiFi
Battery LED
Bluetooth
Telephony (Calls and Data)
Audio (Record and Playback)
Video Playback
Sensors
Broken:
You tell me whats broken with logs
N/A
Compatibility:Redmi Note 10 (mojito/sunny)
Download links
Notice:
No custom kernels are supported in this thread. Only stock kernel and official builds will be supported. No bug reports if that's not the case.
Installation:
First Time Installation:
* Backup before you begin
* Reboot to TWRP-based recovery / Ofox
* Clean Flash (Via adb sideload / via sd card)
* Reboot to recovery after switching slot (For flashing gapps).(If needed). // No Need as on Alpha gapps are pre-included
* Reboot
Update Installation:
Will be revealed Later
Important notes:
* Required * firmware version must be based on latest MIUI builds.
GApps can only be flashed on clean installs.
Formatting data (all user data is wiped, including internal storage) is a must if Stockrom was previously installed and device was encrypted.
Telegram Community
LineageOS team
AOSP
SpiceOS Community
CrDroid
AOSPA
Pixel Experience
BlissROM
AOSP Extended
Arrow OS
Click to expand...
Click to collapse
I have a question that I hope to be answered. Why when installing this Rom, my speakers are cracked while I install the Pixel OS rom without this problem?
==== 21 Sep, 2022 ====
Beta 1
Changelogs:-
+ Updated all blobs from stock MIUI V13.0.10
+ Fixed Widevine L1 issue
+ Added back Dirac and Thermal Profiles
+ Fixed NFC spams
+ Used Clang 15.0.2 for latest WCSF
+ Vanilla only build from now onwards
Mthw said:
So far two minor issues and one bigger:
1. fingerprint indicator is misplaced
2. UW and M lenses are unavailable (tested with Gcam go by Shamim)
3. My banking apps refuse to work even though YASNAC says PASS and PASS - maybe because of encryption?
Otherwise the ROM is stable so far and has no major issues.
Click to expand...
Click to collapse
good enough for daily driver ? any other bug beside this ?
Anush02198 said:
==== 21 Sep, 2022 ====
Beta 1
Changelogs:-
+ Updated all blobs from stock MIUI V13.0.10
+ Fixed Widevine L1 issue
+ Added back Dirac and Thermal Profiles
+ Fixed NFC spams
+ Used Clang 15.0.2 for latest WCSF
+ Vanilla only build from now onwards
Click to expand...
Click to collapse
which gapps provider is good combination for vanilla build ? BitGapps ?
pihpih95 said:
good enough for daily driver ? any other bug beside this ?
Click to expand...
Click to collapse
I don't use this ROM anymore, I am currently on PixelOS.
Mthw said:
I don't use this ROM anymore, I am currently on PixelOS.
Click to expand...
Click to collapse
Sorry for offtopic but a13 or a12 build ?
pihpih95 said:
Sorry for offtopic but a13 or a12 build ?
Click to expand...
Click to collapse
Android 13, works great, fastest ROM I've used on this phone, some features are missing from A12 but overall no issues, battery life seems to be slightly worse.
does this rom have ota updates?
edit: nvm, is the quick settings menu in the brewery not implemented yet or is this a bug?
RasitAyaz said:
does this rom have ota updates?
edit: nvm, is the quick settings menu in the brewery not implemented yet or is this a bug?
Click to expand...
Click to collapse
its not implemented only few features are there
==== 09 October, 2022 ====
Changelogs:-
+ Used Clang 15.0.3 for latest WCSF
+ mojito:Add missing camera blobs
+ sm6150-common: Shift to stock Neural Networks Blobs
+ sm6150-common:Fix some more sepolicy denials
SS :- https://t.me/Redminote10channel/232
New Build is UP:-
Changelogs:-
==== 08 November, 2022 ====
+ Used latest WCSF
+ Slightly Tuned Audio
+ sm6150-common: Use RSA4096 key also for vbmeta_system
+ sm6150-common: rootdir: Set readahead_size_kb=128 to data
+ sm6150-common: rootdir: Set readahead_size_kb=128 on fstab
+ sm6150-common: parts: Fix missing ambient display string
+ sm6150-common:Fix some more sepolicy denials
* ANX is almost fully fixed with just some glitches with document mode in this build
* Note :- ANX has to flashed seperately and is not included in the build and has to be flashed seperately via TWRP
* ANX build :- Download (Whole and sole credits of this ANX build goes to @Hami_Do )
Flashing Instructions :-
* Goto TWRP/OFOX flash the rom zip
* Reboot to recovery flash gapps and ANX (for those who want's ANX)
* Reboot to system.
New Build is UP:-
Changelogs:-
==== 22 January 2023 ====
+ Used latest WCSF
+ Update Blobs from mojito qssi-user 12 SKQ1.210908.001 V13.0.11.0.SKGMIXM release-keys
+ sm6150-common: Switch to legacy sepolicy_vndr
+ sm6150-common:Remove vendor_debugfs_clk
+ sm6150-common: Kill IMS logspam
+ sm6150-common: Clean debug properties for graphics layer
+ sm6150-common: props: Use HintManager for HWUI
+ sm6150-common: Enable config_avoidGfxAccel
+ Alter Partitions to Fit bit larger gapps
+ sm6150-common: Disable blur on app launch
+ sm6150-common: Disable Async MTE on System Server
+ sm6150-common: Switch to SkiaGL
+ sm6150-common: props: Disable Skia tracing by default
+ sm6150-common: Compile HWUI for performance
+ sm6150-common: overlay: Compact cached app heaps in the background
+ sm6150-common: overlay: Allow more cached apps in the background
+ sm6150-common: overlay: Offload WM shell to another thread
+ Enable F2FS Compression
+ Initial User build
ScreenShots :- https://t.me/Redminote10channel/317
Which gapps is suggested?
Flashed NikGapps core but play service lacking location permission!