Development [ROM][13][OFFICIAL] SpiceOS 6.4 [mojito/sunny]

Development [ROM][13][OFFICIAL] SpiceOS 6.4 [mojito/sunny] - Redmi Note 10

Kernel source code: xiaomi-sdm678/android_kernel_xiaomi_mojito
Our Source code is available in the SpiceOS Github repo
Working:
Camera (and flashlight)
WiFi
Battery LED
Bluetooth
Telephony (Calls and Data)
Audio (Record and Playback)
Video Playback
Sensors
Broken:
You tell me whats broken with logs
Click Here
Compatibility:Redmi Note 10 (mojito/sunny)

Download links
Notice:
No custom kernels are supported in this thread. Only stock kernel and official builds will be supported. No bug reports if that's not the case.
Installation:
First Time Installation:
* Backup before you begin
* Reboot to TWRP-based recovery / Ofox
* Clean Flash (Via adb sideload / via sd card)
* Reboot to recovery after switching slot (For flashing gapps).(If needed). // No Need as on Alpha gapps are pre-included
* Reboot
Update Installation:
Will be revealed Later
Important notes:
* Required * firmware version must be based on latest MIUI builds.
GApps can only be flashed on clean installs.
Formatting data (all user data is wiped, including internal storage) is a must if Stockrom was previously installed and device was encrypted.
Telegram Community
LineageOS team
AOSP
SpiceOS Community
CrDroid
AOSPA
Pixel Experience
BlissROM
AOSP Extended
Arrow OS

==== 27 Aug, 2022 ====
Changelogs:-
+ First Initial Build
+ No Encryption
+ Has pre-included minimal gapps for now
+ Enforcing userdebug build
Screenshots :- https://t.me/Redminote10channel/181

Thank you for the release, will try it soon and report any issues I find.

So far two minor issues and one bigger:
1. fingerprint indicator is misplaced
2. UW and M lenses are unavailable (tested with Gcam go by Shamim)
3. My banking apps refuse to work even though YASNAC says PASS and PASS - maybe because of encryption?
Otherwise the ROM is stable so far and has no major issues.

Great Job!!!!
Running Android 13 so early will be amazing haha
will try ASAP
kudos to be the first... (at xda )

==== 28 Aug, 2022 ====
ALPHA 2
Changelogs:-
+ Fixed Encryption
+ Has pre-included minimal gapps
+ Fixed side FP indication

1 bug: Broken copypaste function. Copypaste panel doesn't appears, when you select any word/words. You must "select" text again. Related only to System Webview apps.
Strange, bug gone
2 bug: It is not possible to remove search widget.

Anush02198 said:
SpiceOS is a free, community built, aftermarket firmware distribution of Android 13 (T), which is designed to increase performance and reliability over stock Android for your device.
SpiceOS is based on the Android Open Source Project(AOSP) with extra contributions from many people within the Mallu Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps).

==== 21 Sep, 2022 ====
Beta 1
Changelogs:-
+ Updated all blobs from stock MIUI V13.0.10
+ Fixed Widevine L1 issue
+ Added back Dirac and Thermal Profiles
+ Fixed NFC spams
+ Used Clang 15.0.2 for latest WCSF
+ Vanilla only build from now onwards

Mthw said:
So far two minor issues and one bigger:
1. fingerprint indicator is misplaced
2. UW and M lenses are unavailable (tested with Gcam go by Shamim)
3. My banking apps refuse to work even though YASNAC says PASS and PASS - maybe because of encryption?
Otherwise the ROM is stable so far and has no major issues.
Click to expand...
Click to collapse
good enough for daily driver ? any other bug beside this ?

Anush02198 said:
==== 21 Sep, 2022 ====
Beta 1
Changelogs:-
+ Updated all blobs from stock MIUI V13.0.10
+ Fixed Widevine L1 issue
+ Added back Dirac and Thermal Profiles
+ Fixed NFC spams
+ Used Clang 15.0.2 for latest WCSF
+ Vanilla only build from now onwards
Click to expand...
Click to collapse
which gapps provider is good combination for vanilla build ? BitGapps ?

pihpih95 said:
good enough for daily driver ? any other bug beside this ?
Click to expand...
Click to collapse
I don't use this ROM anymore, I am currently on PixelOS.

Mthw said:
I don't use this ROM anymore, I am currently on PixelOS.
Click to expand...
Click to collapse
Sorry for offtopic but a13 or a12 build ?

pihpih95 said:
Sorry for offtopic but a13 or a12 build ?
Click to expand...
Click to collapse
Android 13, works great, fastest ROM I've used on this phone, some features are missing from A12 but overall no issues, battery life seems to be slightly worse.

does this rom have ota updates?
edit: nvm, is the quick settings menu in the brewery not implemented yet or is this a bug?

RasitAyaz said:
does this rom have ota updates?
edit: nvm, is the quick settings menu in the brewery not implemented yet or is this a bug?
Click to expand...
Click to collapse
its not implemented only few features are there

==== 09 October, 2022 ====
Changelogs:-
+ Used Clang 15.0.3 for latest WCSF
+ mojito:Add missing camera blobs
+ sm6150-common: Shift to stock Neural Networks Blobs
+ sm6150-common:Fix some more sepolicy denials
SS :- https://t.me/Redminote10channel/232

New Build is UP:-
Changelogs:-
==== 08 November, 2022 ====
+ Used latest WCSF
+ Slightly Tuned Audio
+ sm6150-common: Use RSA4096 key also for vbmeta_system
+ sm6150-common: rootdir: Set readahead_size_kb=128 to data
+ sm6150-common: rootdir: Set readahead_size_kb=128 on fstab
+ sm6150-common: parts: Fix missing ambient display string
+ sm6150-common:Fix some more sepolicy denials
* ANX is almost fully fixed with just some glitches with document mode in this build
* Note :- ANX has to flashed seperately and is not included in the build and has to be flashed seperately via TWRP
* ANX build :- Download (Whole and sole credits of this ANX build goes to @Hami_Do )
Flashing Instructions :-
* Goto TWRP/OFOX flash the rom zip
* Reboot to recovery flash gapps and ANX (for those who want's ANX)
* Reboot to system.

New Build is UP:-
Changelogs:-
==== 22 January 2023 ====
+ Used latest WCSF
+ Update Blobs from mojito qssi-user 12 SKQ1.210908.001 V13.0.11.0.SKGMIXM release-keys
+ sm6150-common: Switch to legacy sepolicy_vndr
+ sm6150-common:Remove vendor_debugfs_clk
+ sm6150-common: Kill IMS logspam
+ sm6150-common: Clean debug properties for graphics layer
+ sm6150-common: props: Use HintManager for HWUI
+ sm6150-common: Enable config_avoidGfxAccel
+ Alter Partitions to Fit bit larger gapps
+ sm6150-common: Disable blur on app launch
+ sm6150-common: Disable Async MTE on System Server
+ sm6150-common: Switch to SkiaGL
+ sm6150-common: props: Disable Skia tracing by default
+ sm6150-common: Compile HWUI for performance
+ sm6150-common: overlay: Compact cached app heaps in the background
+ sm6150-common: overlay: Allow more cached apps in the background
+ sm6150-common: overlay: Offload WM shell to another thread
+ Enable F2FS Compression
+ Initial User build
ScreenShots :- https://t.me/Redminote10channel/317

Which gapps is suggested?
Flashed NikGapps core but play service lacking location permission!

Related

[7.1.2][OFFICIAL][FINAL][ Resurrection Remix 5.8.5 Nougat [VoLTE/DolbyAtmos/Magisk]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ROM:[7.1.2][OFFICIAL][FINAL][ Resurrection Remix 5.8.5 Nougat [VoLTE/DolbyAtmos/Magisk]
ROM is pretty stable, camera work, good performace, good battery. Ready for everyday use (IMHO).
Work in MultiROM as Internal/Secondary ROM
Download: link
GAPPS (does not included) : http://opengapps.org/ arm64 -> 7.1 -> Minumum required - Pico
Install/Update Note: Please, wipe system, cache, dalvik before install/update rom. Also flash Gapps after ROM WITHOUT reboot.
Sound settings/Viperfx DolbyAtmos now included in the ROM. ViperFX zip for TWRP: link
Here are my settings of viperfx & dolby atmos:
Device Trees:
https://github.com/x2-devel
Special thanks to:
RR Project for awesome ROM
@Tortel1210 for his big work on le max 2 kernel & device tree
@infrag for porting BlackScreen Kernel to Max2, VoLTE blobs and other work on device tree
@sdv22 for his working on framework, doze profiles and powersaving
darkobas for his hard work on OMNI for LePro3, his kernel & help
@ffboy2009 for his big work on le max 2 kernel & device tree
@codeworkx for his working on device tree
@Jrior1 for his working on leeco kernels
@cr3pt for his working on LOS
@arco for his shim for mm-qcamera-daemon for samsung!
@mosimchah for BlackScreen Kernel
And You all guys for testing and using this ROM
Last build: 06132017
ChangeLog
Changelog 02142017:
First build
Changelog 02192017:
Some fixes now more stable
Changelog 02202017:
Fixed autorotation and accelerometer
Changelog 03272017:
New build based on LOS14.1 sources
Changelog 04182017:
* Update to RR-5.8.3 (7.1.2)
* Fix multirom support as Secondary ROM
Changelog 04202017:
* Camera UP!
Changelog 04262017
* Update kernel, fixed performance issue, switch some features. Antutu 152k.
* Fixed incorrect battarey led working (from los gerrit, by Tortel)
* Fix audio_policy for divinebeats
* LePref: Remove unworked HAL switch
Changelog 04262017
* Mic volume fix
Changelog 05062017
- Last ViperFX & Dolby Atmos minimal package (with no garbage) included and work with all sounds, e.g. ringtones
- ViperFX & DA does not cause crash of Gallery and some other app now, also it must work correct with BT
- Pico gapps included
- Build use old (i will name it "STABLE") lineageOS kernel for now. But who want new, can flash it manualy.
- Also included LeTVRemoteControl, LeTVCamera (letvcamera dont work now)
- WIth stable kernel work: IR, Ambient Display
Changelog 05082017
- Dolby Atmos for LeMax 2 (fixed)
- Gapps removed from build
Changelog 05232017
- Add VoLTE support (thnks @infrag for volte blobs)
- Update audio configs, fix some audio issues
- Update powersaving system, doze profiles
- BlackScreen 2.1 Kernel (thnks @mosimchah for kernel & @infrag for porting to max2)
Changelog 06132017
- Updated Adreno & Vulkan blobs (thnks @infrag)
- Kernel: BS2.3 (thnks @mosimchah & @infrag)
- Ramdisk now compatible with LOS, you may install other kernels without changes.
- Last RR sources
- Many other small fixes (can be found on github)
Changelog 09182017
- ROM: Security Patch 05 Sep
- Device: fix low volume in cam recording
- Device: enable sdcardfs
- Kernel: BS3.5-RRPS
- Kernel: Autofocus fix
- Kernel: Optimized battery life
- Kernel: fix blueborne
- Kernel: fix sdcardfs driver for correct work with Multirom
Changelog 10042017
- Using new vendor tree fully remaked from beginning (from 23S and OB20)
- Switched to new radio stack
- Fix sdcardfs for multirom (it will work without patches in secondary rom with sdcardfs)
- Fix autobrightnes values
- Fix low level sound record
- Dex preopted
- ViperFX, SnapdragonCamera, AKT Profiles was removed from build
- Security patch 05 Oct
- Autofocus fix (thanks infrag)
- Some power tweek
- Kernel BS-3.5.i-RR-PS
Changelog 10062017
- Blobs downgraded from 23S to 19S, its more stable, camera has no "white dots".
- Slowmotion fix
- Removed unneeded shim for ims, it cause camera "clicks"
- VoLTE must work now
- Autobrightnes tweek
- Improved battery
If you looking for ResurrectionRemix-M-v5.7.4 OFFICIAL FINAL, look here:
ROM:[x82X][6.0.1] ResurrectionRemix-M-v5.7.4 OFFICIAL FINAL
Download: http://www.resurrectionremix.com/ -> Download -> x2
Mirror (Google Drive): link
Maintainer: @andr68rus
Device Tree: @Tortel, @cr3pt, @andr68rus https://github.com/tortel
Dont work
- VoLTE
Work
- All other.
Installation:
1. Backup your current ROM
2. Download the rom ResurrectionRemix-M-v5.7.4.xxxxxx.zip file
3. Move to phone
4. Reboot the phone in recovery [TWRP]
5. Wipe: "System, Cache, Dalvik, Data"
6. Install -> ResurrectionRemix-M-v5.7.4.xxxxxx.zip
7. Reboot
GAPPS (does not included) : http://opengapps.org/[/show upurl] arm64 -> 6.0 -> Minumum required ( Pico ) Sound settings/Viperfx:[GAPPS (does not included) : http://opengapps.org/ arm64 -> 6.0 ...ogle.com/open?id=0B-2l1xmYBAzsaDR3NldfbGljd0E (c) royalseeker, original topic here
2. I recomend turn on speaker optimisation in viperfx and configure your dolby atmos. This will give you very good sound.
ChangeLog:
26 Jan 2017:
* accelerometer fixed (thnx to @Tortel)
* Snap Camera can now 21 mp
* LED Notification fixed
* Remote Control included.
30 Jan 2017:
* Camera2Api work, set by default
- RIL still have problem with "Only 2G mode"
02 Feb 2017:
* 4K Video in Snap
* Voice quality (Need test, also if you will install divinebeats, install patched version!), also some other sound fix, please report about problems.
* Some changes in Ambient display, now it fully work (You need to enable it in Settings - Ambient Diplay (not in DIsplay!)
* Removed D2TW from settings
* Force enabled camera1api: whatapp and other app work nice.
+ Added LeecoCamera App from S22 test only (to run it you need enter settings -> app -> permission and enable permission, it will not ask for it by default). Panoramic dont work.
10 Feb 2017
* Fix some errors from previos build (LED, hardware keys).
* Try to fix 2G.
11 Feb 2017
* Wifi 802.11n channel bonding fix.
* Return back individual sim on/off switch.
14 Feb 2017
* Fix some errors, FW now stable.
17 Feb 2017
* Patch Level 12012016
19 Feb 2017
+ Now we are OFFICIAL
* Competly moved to LOS device tree sources
+ Added OTA (Configuration -> Update)
- Removed LeTVRemoteControl, LeTVCamera (can be installed from ZIP)
+ Fixed wifi 2.4GHz+BT issue
+ Snap from LOS repo with autoresoluton fix
* Speakerphone fix
* Device name fix for PlayMarket
20 Feb 2017
- Fix wifi tethering
- Some changes for viperfx work (change fluencetype to none, add sample rate in audiopolicy)
- Shorten default BT name "LeEco Le Max 2" -> "Le Max 2"
- Changes in advanced settings translation (ru(full), es(part), cn(part))
26 Feb 2017
- Security patch level updated to 01/01/2017
- Added hardware buttons disable/enable switch
- Added Hardware buttons light brightness + mode settings
- Added leeco quick charge settings (Settings-> Configuration -> Battery).
- Changed live display default day color temperature from 8000 to 6500
- Full Simple Chines translation (thanks @atzsmm)
- LeTVRemoteControl, LeTVCamera returned back to ROM.
01 March 2017
* Fixed QuickCharge
* RR update: Upstream merged to LineageOS
* AOSP update: Tag bumped to refs/tags/android-6.0.1_r78
07 March 2017
* Battery optimisation tweeks
* Small fixes
25 March 2017
* Last dev tree updates
* Mokee kernel
16 April 2017 - FINAL BUILD.
* Mokee Kernel with QC 3.0

Are the gapps included or we should flash it?
Enviado desde mi A0001 mediante Tapatalk

arceoxis said:
Are the gapps included or we should flash it?
Enviado desde mi A0001 mediante Tapatalk
Click to expand...
Click to collapse
I think that I didn't flash gapps yesterday but I was very tired maybe I don't remember well

File Download Limit exceeded

Screenshots?

RISHI RAJ said:
File Download Limit exceeded
Click to expand...
Click to collapse
Try this:
To fix this error you simple have to create an account in Yadi.sk. After creating account reopen that link and add that file to your account. After adding to your account go to your files and click that file (which you just added to your account) now click download and download will start without any problem!
Enviado desde mi A0001 mediante Tapatalk

arceoxis said:
Are the gapps included or we should flash it?
Click to expand...
Click to collapse
No, gapps does not included. This is stock ressurection remix rom.
RISHI RAJ said:
File Download Limit exceeded
Click to expand...
Click to collapse
I create mirror on gdisk: https://drive.google.com/open?id=0B-2l1xmYBAzscEZHVWQ1YXkzcE0
Emokah said:
Screenshots?
Click to expand...
Click to collapse
Screenshots +

Thanks for the great rom,As you are an expert Can you do something about Volte,The only thing I miss in this rom

Good job spaciba!!

Yes volte please
Sent from my Le X821 using XDA-Developers Legacy app

I think there is a problem with sound of call is not clear?!
And with hp on it's worth

Please VoLTE enable it in the ROM.

Yes please enable VOLTE. There's already patch available for nougat based ROMs which will enable VOLTE.

Good gob! I'll follow this rom closely.
what happend with accelerometer? with unnofficial cm13 (or lineageos) it works.

I found a bug : fingerprint, completely dead, uninstalled and installed your CM13 and found the same bug .
Now I'm back on 446dev and fingerprints work fast as ever for me.

Oh, how great! A new developer and a new ROM!
Thanks for sharing!

Great job, thank you very much.
All working for me
The fingerprint reader very fast
The camera only allows me an image of max 16 mpx and not the 21 mpx

venezolano69 said:
I found a bug : fingerprint, completely dead
Click to expand...
Click to collapse
Strangely, i test it and it work.
About VoLTE: Guys, first of all we try to fix major bugs (accelerometr, etc) and then try to find the way to enable volte.
BTW, In ru volte working only in Moscow and in test mode only with some operators phone.

j.llorente said:
Good gob! I'll follow this rom closely.
what happend with accelerometer? with unnofficial cm13 (or lineageos) it works.
Click to expand...
Click to collapse
Hm, can you please tell build date where accelerometr work in lineageos? Now it does not work to, we try to fix it.

sdevaux said:
I think there is a problem with sound of call is not clear?!
And with hp on it's worth
Click to expand...
Click to collapse
I also noticed it. Same problem was it november Mokee releases. Add this to ToDo

[ROM][9.0.0][UNOFFICIAL][OCE] LineageOS 16.0 [STABLE]

Changelogs
2019/08/13
Upstream updates and fixes.
Updated to Android 9.0.0_r46 with August Security Patches.
Fixed Bluetooth idle connectivity issues.
Fixed Default RIL network mode on DTWL variant.
Kernel updates.
2019/07/09
Upstream updates and fixes.
Updated to Android 9.0.0_r44 with July Security Patches.
2019/06/22
Upstream updates and fixes.
Updated Qualcomm WiFi Display HAL. (with better compatibility)
Updated Kernel to 3.18.140.
Fixed VoLTE/VoWiFi issues of previous build.
Removed ANT+ HAL.
2019/06/09
Updated to Android 9.0.0_r40 with June Security Patches.
Upstream updates and fixes.
Added back Qualcomm WiFi Display HAL. (for MiraCast)
2019/05/10
Updated to Android 9.0.0_r37 with May Security Patches.
Upstream updates and fixes.
Updated Kernel to 3.18.139.
Updated full graphics stack from LA.UM.7.5.r1-03700-8x96.0.
Tweaked QSEECOMD, for better encryption/decryption.
Fixed manually network selection for some carrier.
2019/04/08
Updated to Android 9.0.0_r35 with April Security Patches.
Upstream updates and fixes.
Updated Kernel to 3.18.138 with WiFi Stability improvements.
Switch I/O Scheduler to CFQ as default.
2019/03/19
Upstream updates and fixes.
Updated GPS blobs from daisy - 9/PKQ1.180917.001/V10.0.3.0.PDLMIXM.
Removed Qualcomm WiFi Display HAL.
PowerHAL tweaks.
GNSS HAL tweaks.
Imported Boeffla's Wakelock blocker into kernel.
[*]Deep sleep works now, should be no more weird battery drops.
2019/03/14
Upstream updates and fixes.
Updated GPS / Location HAL from LA.UM.7.5.r1-04300-8x96.0.
Updated data-ipa-cfg-mgr from LA.UM.7.5.r1-04300-8x96.0.
VoLTE support Taiwan carriers : FET, APTG, T STAR, CHT, TWM (tested with FET VoLTE sim).
Don't power down SIM on airplane mode.
2019/03/08
Updated to Android 9.0.0_r34 with March Security Patches.
Upstream updates and fixes.
[*]Fixed USB Type-C Headphone/Adapter audio playback issues.
[*]Added NoCutoutOverlay for hiding notch. (enable it from Settings > Developer Options > Simulate a display with a cutout > select "Hide")
Updated GPS HAL from LA.UM.7.5.r1-04300-8x96.0.
Updated Power-off alarm blobs from tissot - 9/PKQ1.180917.001/V10.0.5.0.PDHMIXM.
Updated Audio HAL to 4.0.
Older changelogs:
2019/03/03
Updated Kernel to 3.18.136.
Upstream updates and fixes.
Support CID: HTC_622 / Hong Kong DUGL variant.
Tweaked brightness values.
Tweaks for notch.
Updated Power HAL, battery now last longer in the standby mode.
Added Qualcomm WiFi Display HAL. (for cast)
Updated kernel exFAT drivers.
Reduce boot.img sizes.
2019/02/23
Updated Kernel to 3.18.135.
Upstream updates and fixes.
Updated LineageOS Touch HAL
Added LineageOS TrustUSB HAL.
Improved camera compatibility for some apps.
minor device changes.
2019/02/09
Updated to Android 9.0.0_r31 with February Security Patches.
Upstream updates and fixes.
Add Doze package for AOD.
Sepolicy updates for P. (WIP)
Encryption updates.
2019/01/28 Re-uploaded, fixes boot issues.
Upstream updates and fixes.
Updated Graphic stack from daisy - PKQ1.180917.001 / from LA.UM.7.5.r1-03700-8x96.0.
Updated Kernel to 3.18.133 with Sound Control supported.
Update tftp_server blobs to P from daisy.
Added DTS Eagle audio driver.
Updated & Enabled ZRAM.
Doze/WiFi/Brightness minor tweaks.
Updated media_profile for stereo video recording.
2019/01/17
Upstream updates and fixes.
KCAL: set default RGB values to 220, 220, 220 on boot to prevent burn-in issues.
Updated Kernel to 3.18.132.
Added back missing IMS blobs (VoLTE).
Fixed QSEEComAPI firmware loading issues.
2019/01/10
UPDATE: i have made a mistake on this build, re-uploaded again so the DPM & CNE will work properly.
* you can dirty flash 01/10 build over the build named 01/09.
Updated to Android 9.0.0_r30 with January Security Patches.
Upstream updates and fixes.
Updated CNE/DPM/TimeService from daisy-user 9 PKQ1.180917.001 V10.0.1.0.PDLMIFJ release-keys.
Updated Adreno/Vulkan drivers to LA.UM.7.6.2.r1-03000-89xx.0 for Pie.
Added Power-Off Alarm.
Updated Kernel to 3.18.129 & update CPU sched drivers.
Set minimal clock of GPU to 133Mhz.
Added missing ocedtwl RIL blob.
Snap Camera: support Camera APIv2.
2018/12/16
Updated to Android 9.0.0_r21 with December Security Patches.
Upstream updates and fixes.
Update GNSS HAL to LA.UM.7.5.r1-03700-8x96.0
Kang ims.apk and qti-telephony-common.jar from daisy
Re-enable WiFi-Display
Update widevine blobs from marlin - 9.0.0 (PPR2.181005.003, Oct 2018)
Thermal HAL updates
Add support for aptX & aptXHD
Add permissions for HTC Camera
2018/10/22
Upstream updates and fixes.
Fixed USB Headphone.
Fixed Audio Recording issues (Camcorder & audio apps).
Fixed GNSS GPS.
Added KCAL support.
Updated Kernel to 3.18.124
2018/10/20
initial build LOS 16.0 for oce.

Screenshots
Screenshots here!

Workarounds & Tips
Avoiding data encryption issues, please backup your current ROM to SDCARD or your PC.
If you are facing decryption issue after flashing this ROM, and previous using the Stock ROM, please make sure you have used "FORMAT DATA" on TWRP and wipe Data/System/Cache.
If you are using Custom Kernel or Mods and causing issues, i will not be supporting this.
If you are facing microphone issue while recording videos or audios, please WIPE Cache/Dalvik Cache from TWRP.
for those who wants to join us on Telegram, you can enter from HERE

Yeah

Download doesn't work, can you make a GDrive Mirror?

Does it have ota update?

OK I'm having issues if I flash just the ROM it boots
But if I flash both the ROM and gapps its like its going to go into the ROM but it just boots back into twrp I really want it to work for me

Wow, nice job dude!

panda968 said:
OK I'm having issues if I flash just the ROM it boots
But if I flash both the ROM and gapps its like its going to go into the ROM but it just boots back into twrp I really want it to work for me
Click to expand...
Click to collapse
Latest 9.0 gapps seems have some issues, use older 9.0 gapps.

tarkzim said:
Latest 9.0 gapps seems have some issues, use older 9.0 gapps.
Click to expand...
Click to collapse
sorry where can i found the old 9.0 gapps

panda968 said:
sorry where can i found the old 9.0 gapps
Click to expand...
Click to collapse
Just search in Google.com....
https://opengapps.org/

panda968 said:
sorry where can i found the old 9.0 gapps
Click to expand...
Click to collapse
find it here: old releases
i'm using 10/9 version and its fine.

hi Developer, I am having again same problem with downloading this rom, more than 12 hours needed.......any other mirrors? or other ways to download?

Hi , I am having boot issues too
It doesn't boot with or without gapps
cleaned everything

guojunjay said:
hi Developer, I am having again same problem with downloading this rom, more than 12 hours needed.......any other mirrors? or other ways to download?
Click to expand...
Click to collapse
Here: https://drive.google.com/open?id=1JXAWKu4SvbntvW3afrzhBfc5MXMeBH2G

Ok , it booted without gapps after clearing cache
downloaded and flashed gaps 10/09/2018 but it is rebooting in recovery
Is there ny other gapps?

ForceField said:
Ok , it booted without gapps after clearing cache
downloaded and flashed gaps 10/09/2018 but it is rebooting in recovery
Is there ny other gapps?
Click to expand...
Click to collapse
Gapps 15/10/2018 should work

minhnewpro said:
Gapps 15/10/2018 should work
Click to expand...
Click to collapse
ok thanks , downloading them now
which package ? I am downloading pico

ForceField said:
ok thanks , downloading them now
which package ? I am downloading pico
Click to expand...
Click to collapse
Pico is fine

Development [ROM][11.0][OFFICIAL] crDroid Android v7.x (mojito/sunny)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features
Click for feature list
Always Have a full functional Backup. Just in case!
GAPPS | MICROG | Vanilla
Useful Links:
Magisk
Orange Fox
Logcat Reader
Installation Order:
> Flash / Sideload
> Reboot to Recovery
> Format (optional)
[OR]
Install it directly from fastboot if you have issues with sideloading
Don't expect any support if you:
- are not running the included kernel
- have installed any crazy mods !
- have modified system files
Thanks to:
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
Contributors:
@ZIDAN44
@TheMalachite
@gwolfu
@mukesh22584
@adi153
XDAevDB Information
Source Code: https://github.com/crdroidandroid
Kernel Source Tree: xiaomi-sdm678 / android_kernel_xiaomi_mojito
ROM OS Version: Android 11
Based On: LineageOS
SMASH THE LIKE & SHOW YOUR APPRECIATION

Highlights & Device Specific Changes:
Maintainer: Anush Madathumkara
Build type: Monthly
==== 17 December, 2021 ====
- Based on Latest WCSF Kernel
- Fixed Widevine L1
- Fixed random systemui crashes on Widevine L1
- mojito: overlay: set CPU temperature paths
- mojito: overlay: reduce rounded statusbar corner padding
- sm6150-common:Build libgui and its vendor version
- sm6150-common:sepolicy: fix Widevine DRM
- sm6150-common:Add a missing media blob from stock
- sm6150-common:Add missing DRM blobs from stock
==== 17 November, 2021 ====
- Based on Rebased WCSF Kernel
- Fixed some partition related issues (Now flashable via OFRP)
- sm6150-common: Build atrace 1.0 service hals
- sm6150-common: rootdir: Remove enable-low-power trigger from recovery
- sm6150-common: rootdir: Allow all filesystems for USB-OTG
- sm6150-common: prop: Disable sf EGL image tracking
- sm6150-common: Kill kernel cmdline console parameters
- sm6150-common: wifi: Disable wifi packet logging
- sm6150-common: configs: power: Remove pixel audio hints
- sm6150-common: overlay: Disable global mode and CDMA choices
- sm6150-common: overlay: Allow seamless Doze state transitions
- sm6150-common: rootdir: Chown drv8846_dev & akm09970 camera nodes
- sm6150-common: prop: Switch to Codec2 by default
- sm6150-common: prop: Disable Codec2 input surface
- sm6150-common: parts: Add drawable icon for AOD
- sm6150-common: sepolicy: Address virtual AB OTA denies
- sm6150-common: Set NUM_FRAMEBUFFER_SURFACE_BUFFERS to 3
- sm6150-common:Kang HWUI props from stock mojito qssi-user 11 RKQ1.201022.002 V12.5.3.0.RKGMIXM release-keys
- sm6150-common:Add 300Mhz scaling_min_freq for CPUBigClusterMinFreq and CPULittleClusterMinFreq
- sm6150-common: BoardConfig: Drop graphics layer memory buffer
- sm6150-common:Add HDR & WCG Flags
- sm6150-common: Do not use phase offsets as duration.
- sm6150-common: prop: Fix screenrecord lag
- sm6150-common: Define [email protected] into FCM
- mojito: Update to Redfin November FP
- Improved Stability && performance
- 1080p Youtube playback issue addressed (FWIP)
==== 27 October, 2021 ====
- Upated WCS kernel
- Raised reserved partitions to support for improving gapps support
- sm6150-common: Disable partial FB excl rect

Highlights & Device Specific Changes:
Maintainer: Prince Cooper (Discontinued)
Build type: Monthly
==== 01 October, 2021 ====
- Fixed Slow charging
- Fixed camera color shift
- Moved to TWRP (due to ofox kernel issues)
- Allow all filesystems for USB-OTG
- Don't check prox before pulsing
==== 27 September, 2021 ====
- Moved to armv8-2a
- OrangeFox Recovery preincluded
- Added Battery Health Stats
- Added camera cutout notch
- Added XiaomiParts (Dirac, Clear Speaker & Thermal Profiles)
- Added color modes
- Updated blobs from V12.5.3.0.RKGMIXM
- Drop ANX/MiuiCam support for now
- Improved Haptic Feedback
- Fixed Google Backup/Restore
- Fixed FMRadio
- Fixed WFD/Cast
- Fixed LDAC & AptxHD
- Replaced PlayStore with Aurora Store in microg variant
- Smarter decisions on whether to use 2/5Ghz AP
- Updated device cutout corners
- Disabled wifi firmware logging
- Fixed whatsapp mic delay or crashes
- More Smooth AF
==== 21 August, 2021 ====
- Fixed OKGoogle Detection
- Fixed CPU Thermal Info
- Fixed Document Mode
- Added Clone Shots (miuicam)
- Added Smart Charging
- Added Burn-in Protection
- Added Smart Pixels
- Brought back TWRP
==== 09 August, 2021 ====
- crDroid 7.9 upstream
- August patch merged
- mojito: TWRP drop due to instability
- mojito: Bluetooth AAC codec Fixed
- mojito: Wired headset volume buttons fixed
- mojito: ANXCam replaced with MiuiCam port
- mojito: Fastbootd added to Power Menu
- mojito: DavikHeap fixed for 4gb variants
- Revamped Dialer dark theming
- Updated native services for better FPS (to be tested)
- Fixed new message compose with stock Messaging app
- Removed blur additional changes to fix blur glitches
- Added option to disable pill (crdroid > UI)
- Added customization for rounded corners (crdroid > UI)
- Enabled cached app freezer
- Various under the hood updates and misc fixes
==== 16 July, 2021 ====
- crDroid 7.8 upstream
- July security patch
- Increased system size
- Pre-included TWRP
- Included ANXCam 185R
- Fixed Cam AV sync bugs
- Quickstep Blur fixes
- Fix media playback issues
- Fixed VolumeDialog animation when ringer and notification are unlinked
- Power menu UI customizations
==== 08 June, 2021 ====
- Recovery ROMs from now
- Vanilla Variant discontinued
- Latest Firmware Mandatory
- Added Gboard Lite
- Removed MiXplorer Apps
- Less frequent camcorder audio bug
==== 03 June, 2021 ====
- Home crash fixed
- Added stock terminal, AudioFX
- LOS Recovery resolution to native
- VANILLA / GAPPS variants included
- SafetyNet Pass (No fix needed)
==== 24 May, 2021 ====
- Fastboot ROM.
- Weather Provider fixed
- Added Custom Headers
- Video Recording Stutter fixed (can be random)
- Samsung UI audio implemented
- Added Gboard, Via & FMRadio (won't work until we get OSS Vendor)
- Removed substitute apps, improved response time, much more
==== 20 May, 2021 ====
- Initial Build
- May security patch
- Removed some stock apps
- Added QuickPic Gallery

Hello,
¿Is there a app radio FM?
Thanks

Amazing Rom, thanks

uranoscopus said:
Hello,
¿Is there a app radio FM?
Thanks
Click to expand...
Click to collapse
Nop. Will include in the next build.

MPK99 said:
Nop. Will include in the next build.
Click to expand...
Click to collapse
thanks!!!

I see from the filename it's a vanilla version without Gapps.
Does it have signature spoofing already for use of microG?

UniNick said:
I see from the filename it's a vanilla version without Gapps.
Does it have signature spoofing already for use of microG?
Click to expand...
Click to collapse

I'm really happy to see crDroid now on the Redmi Note 10 - I used crDroid already on 2 other phones and in my opinion it's the best custom ROM!
This first build is already excellent, with all the customisation features and only the above mentioned, few bugs.
For use with microG however it shares the similar (but not the same) problems I encountered with dotOS:
- all of my banking apps don't work (with dotOS 2 of 3 worked).
- DHL parcel, Wolt, Flightradar24 etc report problems with missing play services and force close or don't show maps (same in dotOS).
- Uber app works (it doesn't with dotOS).

I tried it also with Gapps now (NikGapps Core Version), flashed via ADB sideload.
Situation a bit better than with microG.
DHL parcel, Wolt etc work now with the Google Maps Interface.
Two banking apps still making problems and complaining about modified operating system.
This doesn't happen with EvolutionX 5.7 ROM for Redmi Note 10, there all banking apps work.

UniNick said:
This doesn't happen with EvolutionX 5.7 ROM for Redmi Note 10, there all banking apps work.
Click to expand...
Click to collapse
It's bcaz evox is not vanilla, it comes with gapps, so play store certification exists.
You know even dotos vanilla had same problems.
Use GApps roms for hazzle free banking experience.

Can I use microg with it ?

suku.incognito said:
Can I use microg with it ?
Click to expand...
Click to collapse
yes

Good ROM. There are minor bugs:
- red border when unlocking the screen
- the screen does not always light up when there is an incoming call

ups2k said:
Good ROM. There are minor bugs:
- red border when unlocking the screen
- the screen does not always light up when there is an incoming call
Click to expand...
Click to collapse
1. Red border is an animation from crdroid home launcher. I can't do anything bout it
2. Reconfigure the Default "Phone" app to dialer.

I've just flashed this rom, WiFi can't be turned on even after I flash the latest firmware, any help please? Or I have to flash the rom again?
Edit: Maybe there's a problem with TWRP, I switched back to lineage recovery and it works fine now.

duc3503 said:
I've just flashed this rom, WiFi can't be turned on even after I flash the latest firmware, any help please? Or I have to flash the rom again?
Edit: Maybe there's a problem with TWRP, I switched back to lineage recovery and it works fine now.
Click to expand...
Click to collapse
It's a fastboot rom, follow instructions carefully & it'll work.

MPK99 said:
I didn't adress anyone to flash firmware. It's pre-included ¯\_(ツ)_/¯
It's a fastboot rom, follow instructions carefully & it'll work.
Click to expand...
Click to collapse
Thanks sir, great rom so far. Will the gapps build arrive soon?

hello,
when you say "• Added Gboard, Via & FMRadio (won't work until we get OSS Vendor)"
the FM radio is ok?, can i listen it?
thanks

Development [ROM][12.0][UNOFFICIAL] FLUID OS v2.0 BETA (mojito/sunny).

Screenshots :- SS
Changelogs
========================
ALPHA 1
OCT 14 , 2021
========================
+ Initial Alpha Build
========================
ALPHA 2
OCT 20, 2021
========================
+ Updated WCS Kernel included
+ Improved System Stability
+ Increased Reseved Partition Size ( Fixes issues of flashing bit more heavier gapps packages ).
+ Now Build can be Flashed via OrangeFox (Thanx to Ayaxat for testing the build).
+ Fixed Screen Recording Lags
========================
ALPHA 3
NOV 8 , 2021
========================
+ Updated WCS Kernel included
+ Tweaked Reserve Partition sizes ( Might fix some flashing issues for some users).
+ Fixed sepolicy denials
+ Selinux is now Enforcing
+ Rom is also force encrypted
+ Improved Booting time
+ sm6150-common: Provide [email protected] on vendor
+ sm6150-common: props: Enable skia reduceOpsTaskSplitting
+ sm6150-common: props: Don't write binary XML files
========================
BETA 1
NOV 10 , 2021
========================
+ New Rebased WCS Kernel included
+ sm6150-common: Set NUM_FRAMEBUFFER_SURFACE_BUFFERS to 3
+ sm6150-common: Build atrace 1.0 service hals
+ sm6150-common: rootdir: Remove enable-low-power trigger from recovery
+ sm6150-common: rootdir: Allow all filesystems for USB-OTG
+ sm6150-common: prop: Disable sf EGL image tracking
+ sm6150-common: Kill kernel cmdline console parameters
+ sm6150-common: wifi: Disable wifi packet logging
+ sm6150-common: configs: power: Remove pixel audio hints
+ sm6150-common: overlay: Disable global mode and CDMA choices
+ sm6150-common: overlay: Allow seamless Doze state transitions
+ sm6150-common: rootdir: Chown drv8846_dev & akm09970 camera nodes
+ sm6150-common: overlay: Snap: Enable camera API v2
+ sm6150-common: sepolicy: Address virtual AB OTA denies
+ sm6150-common: prop: Switch to Codec2 by default
+ sm6150-common:Kang HWUI props from stock mojito qssi-user 11 RKQ1.201022.002 V12.5.3.0.RKGMIXM release-keys
+ sm6150-common:Add 300Mhz scaling_min_freq for CPUBigClusterMinFreq and CPULittleClusterMinFreq
+ Improved System Stability
+ Improved overall responsiveness and fluidity
========================
BETA 2
NOV 16 , 2021
========================
+ Updated WCSF Kernel
+ sm6150-common: add missing hals to FCM
+ sm6150-common: Define [email protected] into FCM
+ sm6150-common: BoardConfig: Drop graphics layer memory buffer
+ sm6150-common: Add HDR & WCG Flags
+ sm6150-common: Do not use phase offsets as duration
+ sm6150-common: overlay: Advertise fingerprint on power button
+ Improved Stability
+ 1080p Youtube playback issue addressed (FWIP)
========================
BETA 3
NOV 29 , 2021
========================
+ Updated WCSF Kernel
+ sm6150-common: Decomonize some camera blobs
+ sm6150-common:Add a missing media blob
+ mojito:Add Few missing camera blobs
+ mojito:Add libcameraservice.so as prebuilt from stock
+ sm6150-common:sepolicy: fix Widevine DRM
+ sm6150-common:Add missing DRM blobs from stock
+ Fixed Widevine L1
========================
BETA 4
DEC 02 , 2021
========================
+ sm6150-common:Build some media and camera packages
+ msm: camera: Use boot clock for recording start time
+ Fixed Camera video recording issues (Checked with Camera2 and Gcam both)
+ Improved System Stability
+ Improved overall responsiveness and fluidity
========================
BETA 5
DEC 07 , 2021
========================
+ arm64: lib: Checkout strncmp back to msm-4.14 version
+ Fixed Random reboot & system crashes on viewing DRM Widevine L1 contents on OTT apps.
+ Improved System Stability
NOTES :- CTS is failed by default use appropriate magisk modules for CTS pass
Use Included LOS recovery for flashing gapps etc.
*NOTE:- There may be bugs in this build

Will test this ROM

Great to see Android 12!!
A little question...
Did you made any specific change to bring-up A12? (i'm not talking about the rom , i'm talking about the changes required to build A12)

alonsoj636 said:
Great to see Android 12!!
A little question...
Did you made any specific change to bring-up A12? (i'm not talking about the rom , i'm talking about the changes required to build A12)
Click to expand...
Click to collapse
Yes you can check my trees i have added the source above

Can I flash this by twrp?

akoaypinoy said:
Can I flash this by twrp?
Click to expand...
Click to collapse
Flash it via Fastboot OTA Tool

KingTigerM30S said:
Flash it via Fastboot OTA Tool
Click to expand...
Click to collapse
Ah okay thanks

This looks really exciting. Is it ready to use as a daily driver?

DLloyd said:
This looks really exciting. Is it ready to use as a daily driver?
Click to expand...
Click to collapse
That's the point of the thread. Try & let the devs know.

MPK99 said:
That's the point of the thread. Try & let the devs know.
Click to expand...
Click to collapse
i Think its ready for a daily driver as i have been using it since its release and faced no bug

muneeb rizwan said:
i Think its ready for a daily driver as i have been using it since its release and faced no bug
Click to expand...
Click to collapse
Awesome. I need to wait just a couple more days for bootloader to unlock then I'll check it out

Currently using this ROM, so far no bug.
Some problems I got:
1. Pending downloads from Gplay. Clear cache is solve this problem.
2. My SDcard need to be re-formated.
Hope a version with more features will available soon.

Sambaldaun said:
Currently using this ROM, so far no bug.
Some problems I got:
1. Pending downloads from Gplay. Clear cache is solve this problem.
2. My SDcard need to be re-formated.
Hope a version with more features will available soon.
Click to expand...
Click to collapse
Pending downloads issue is a gapps issue for that use Nikgapps core it has fixed that issue completely.
Sdcard reformating needed is maybe because this ROM doesn't have encryption support as of now and your are coming directly from A11 where all Roms are encrypted by default for that u have to decrypt before flashing A12

New Build is up Changelogs and Links are updated above

Bro when stable update will come for redmi note 10 ???

Can anyone please write the install instructions. I am in Oranged Fox recovery and not able to flash zip.
I am getting "KInstallDeviceOpenError"

Mrohan200218 said:
Bro when stable update will come for redmi note 10 ???
Click to expand...
Click to collapse
please refrain from asking ETAs... is considered rude
Just wait for it

Ujjawal1810 said:
Can anyone please write the install instructions. I am in Oranged Fox recovery and not able to flash zip.
I am getting "KInstallDeviceOpenError"
Click to expand...
Click to collapse
maybe you messed partitions ... try to flash miui and then , go back to custom rom...
i had same error and i fixed it by flashing miui with miflash tool

alonsoj636 said:
maybe you messed partitions ... try to flash miui and then , go back to custom rom...
i had same error and i fixed it by flashing miui with miflash tool
Click to expand...
Click to collapse
I was able to Pixel Experience ROM. Can I install this ROM using PE recovery? If not then how should I?

LineageOS 20.0 (Android 13) [Signature Spoofing][OTA updates] for S8/S8+/Note8

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 20.0 for Exynos 8895 devices
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working:
- Wifi
- Sound
- mali drivers
- USB tethering
- HW Backed video Playback
- Ril (Mobile data,calls, sms and stuff)
- Sensors
- Buttons
- Bluetooth
- Wifi HotSpot
- MTP
- 2D and 3D gpu acceleration
- HW encoding/decoding
- Charging with device powered off
- Stuff I didn't test yet
- Camera
- GPS
- Fingerprint Sensor
- Mobicore
- SW codecs
Not Working
- Storage Encryption (WIP switching to FBE from FDE since FDE was removed in 13)
Keep in mind that some LineageOS features have not been completed yet this is not a device bug and please do not report those
Also do not post bug reports for known issues or bug reports without proper
a) Logcat
b) proc/last_kmsg (or proc/kmsg)
c) data/tombstones
d) dmesg
Install gapps right after installing the rom itself don't try to boot to system before that if you want to use gapps (Or wipe data before installing them)
NikGapps have been updated to 13, you might need to clean flash if you used other gapps in past including nikgapps 12.1 version
Make sure you are using latest official TWRP before installing rom older versions do not have proper android 12/13 support
Downloads:
Google Drive
Mega.nz
GitHub releases
if you want to support the project feel free to buy me some coffee paypal.me/ivanmeler
BTC: 1Q823BsSbEKP62JFM7BjXiRCgF84qgcFST
ETH(erc20): 0x979a8e42551e62e6994d3762c9d9f0e76b5d87f9
Donations help cover the build server cost and since I do this in my free time, and also cover the coffee for time spent debugging stuff
Feel free to join telegram group with early builds progress updates and some off topic stuff Join
Based On Android 13/T
Changelog
21.06.2023.
- Merged June 2023. Security update
- Merged latest pixel feature drop
- misc performance and stability improvements
- Synced with LineageOS source
03.05.2023.
- Merged May 2023. Security update
- Misc performance and stability improvements
- Synced with LineageOS source
11.04.2023.
- Merged April 2023. Security update
- Fixed some issues introduced in QPR2
- Synced with LineageOS source
21.03.2023.
- Merged March 2023. Security update
- Misc performance and stability improvements
- Merged QPR2
- Added aptX HD support
- Synced with LineageOS source
23.02.2023.
- Fixed s-pen system reboot issues on Note8
- improved UI performance
- Synced with LineageOS source
08.02.2022.
- Merged February 2023. Security update
- Improved UI performance
- Misc stability improvements
- Fixed race condition in rotation that would rarely prevent screen from waking up
- Synced with LineageOS source
04.01.2023.
- Merged January 2023. Security update
- Camera app improvements
- Misc performance and stability improvements
- Synced with LineageOS source
15.12.2022.
- Added back some features that were missing from QPR1
- Misc performance and stability improvements
- Synced with LineageOS source
08.11.2022.
- Merged November 2022. Security update
- Switched to new AIDL usb hal
- Switched kernel back to clang toolchain
- Misc performance and stability improvements
- Synced with LineageOS source
04.10.2022.
- Merged october 2022. Security update
- Improved UI performance
- Improved stock camera app
- Synced with LineageOS source
01.10.2022.
- Fixed samsungs bug with gps where it would start acting up over time due to time rollover bug
- Synced with LineageOS source
28.09.2022.
- Adressed missing symbol in advanced camera effects lib that wouldnt launch without them
- Allowed system to override some bluetooth props
- Performance and stability improvements
- Synced with LineageOS source (Almost all of lineageos features should be there and work now)
21.09.2022.
- Switched to Generic FunctionFS usb backend (We used legacy functionfs in past)
- Updated USB hal
- Usb hal will now give notifications on port being wet instead of just disabling it without notice
- Merged few more missing BPF commits to kernel
- Unpinned deprecated updatable media apex jar from ram
- Synced with LineageOS source
19.09.2022.
- Updated kernel build flags for new build enviroment
- Misc performance and stability improvements
Switched to source built Bluetooth interface
- Cleaned up device source
- Synced with LineageOS source
07.09.2022.
- Merged September 2022. Security update
- Updated chromium webview to 105.0.5195.79
- Added more customization options powered by Monet
- Misc performance and stability improvements
- Synced with LineageOS source
06.09.2022.
- Fixed home button wake
05.09.2022.
- Fixed camera on Note 8
- Most of lineageos features have been implemented
- Misc performance and stability improvements
- Synced with LineageOS source
01.09.2022.
- Fixed bluetooth audio
- Upreved audio hal to 7.1 from 5.0
- Implemented custom audio service used to load audio hal
- Backported more BPF changes to kernel
- Switched to webview 105.0.5195.68 which is native to T
- Cleaned up the source and patches used to build the rom
- Synced with LineageOS source
27.08.2022.
- Initial release
Contributors
Ivan_Meler
Source Code: https://github.com/8890q/
ROM OS Version: Android 13
ROM Kernel: Linux 4.4.302

Builds are mostly ready for daily use, i had no major issues while testing but some lineageos extras are not implemented yet as its still eaarly days in android 13 development
Huge thanks to everyone who supported this project, helped cover the build server cost and got me coffee/pizza for time spent on development, This project wouldnt be possible without them
Also this builds come with full BPF backport to kernel which enables fancy new android 13 features like gpu monitoring
there were hundreds of kernel commits required to get this working on 4.4 kernel and it took quite a bit of time but new kernel will be used on future 19.1 builds too
You can find some screenshots here

WoW!!! You are super fast man. I like to thank you for keeping this 5 year old devic still alive with latest updates.

Thank you, this is great.

Thanks for hard working bro. Bugs already encountered status bar battery percent don't work and Quick settings non editable

Ivan_Meler said:
LineageOS 20.0 for Exynos 8895 devices
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Working:
- Wifi
- Sound
- mali drivers
- USB tethering
- HW Backed video Playback
- Ril (Mobile data,calls, sms and stuff)
- Sensors
- Buttons
- Bluetooth
- Wifi HotSpot
- MTP
- 2D and 3D gpu acceleration
- HW encoding/decoding
- Charging with device powered off
- Stuff I didn't test yet
- Camera
- GPS
- Fingerprint Sensor
- Mobicore
- SW codecs
Not Working
- Storage Encryption (WIP switching to FBE from FDE since FDE was removed in 13)
Keep in mind that some LineageOS features have not been completed yet this is not a device bug and please do not report those
Example of such features would be button backlight control, battery percentage in status bar, button remaping, toggle for software buttons and such
use common sense and please do not report non device specific bugs
in this rom thread, also do not post bug reports for known issues or bug reports without proper
a) Logcat
b) proc/last_kmsg (or proc/kmsg)
c) data/tombstones
d) dmesg
Install gapps right after installing the rom itself don't try to boot to system before that if you want to use gapps (Or wipe data before installing them)
NikGapps Omni and smaller from this date should work, yes those packages are intended for 12.1 but they meet all 13 requirements and boot on 13 without issues
Make sure you are using latest official TWRP before installing rom older versions do not have proper android 12/13 support
Downloads:
Google Drive
Mega.nz
GitHub releases
if you want to support the project feel free to buy me some coffee paypal.me/ivanmeler
BTC: bc1qqan6m5tn284g38tu52nalc9x5z4all8z5geq6y
ETH(erc20): 0xB737100035a989fA9EaD13B81af2a32EFe6E1C0f
Donations help cover the build server cost and since I do this in my free time, and also cover the coffee for time spent debugging stuff
Feel free to join telegram group with early builds progress updates and some off topic stuff Join
Based On Android 13/T
Changelog
27.08.2022.
- Initial release
IVANOOOOOOOOOOOOOOOOOOOOOO !!!!!
Contributors
Ivan_Meler
Source Code: https://github.com/8890q/
ROM OS Version: Android 12
ROM Kernel: Linux 4.4.302
Click to expand...
Click to collapse

Wwwhat android 13 on this 5+ year old phone? you're insane broo

La vie ces't belle
pas pour tout ..
Merci
Rien je ne regrettre rien

Great job !!!

hernanquiroz1999 said:
Thanks for hard working bro. Bugs already encountered status bar battery percent don't work and Quick settings non editable
Click to expand...
Click to collapse
Keep in mind that some LineageOS features have not been completed yet this is not a device bug and please do not report those

Bluetooth audio don't work for me

expressluke said:
Keep in mind that some LineageOS features have not been completed yet this is not a device bug and please do not report those
Click to expand...
Click to collapse
Ok bro i read this after comment

Thank you you are amazing keep going

i installed it.
the menu to pull up
it does not work.
installed the omni gapps.
does anyone have any advice

is magisk running?

Which gap works for this os? I have downloaded the ones I found but they hang up in the bootloop. And those for 19.1 can't even be installed? Anyone with ideas?

Nikgapas full 13 x64

gnikolson said:
Nikgapas full 13 x64
Click to expand...
Click to collapse
Please! A link to the download page

kari kimber said:
is magisk running?
Click to expand...
Click to collapse
Yes is running

New builds are up here is a brief changelog
- Fixed bluetooth audio
- Upreved audio hal to 7.1 from 5.0
- Implemented custom audio service used to load audio hal
- Backported more BPF changes to kernel
- Switched to webview 105.0.5195.68 which is native to T
- Cleaned up the source and patches used to build the rom
- Synced with LineageOS source
Do note you might need to clean flash if you used 12.1 gapps that replace default webview and use 13 gapps instead
Im aware of curent camera issues affecting Note 8 and im working on a fix right now, it will be out ASAP
tho it might take some time since i dont have note 8 or properly working s8/s8+ for that matter so it takes a bit of time to debug everything
Huge thanks to everyone who donated and helped cover the build server cost and got me coffee
Enjoy new builds and stay safe

Better Mobile App

welcome