Hello. I have CMR-AL09 and I hard reseted the tablet. Now there is FRP protection and I dont know screen code or the google account.
How can I bypass FRP?
I've looked every single tutorial on the internet and none of them work.
I can access fastboot but no adb because oem is locked. Cannot unlock it because cannot access tablet settings(?)
fastboot oem unlock tell me "no permission" or something those lines.
I've tried to downgrade via sd card but it wont load the firmware. instantly tells me error and tells me to reboot.
I've tried the wifi proxy things, safemode, talkback thing and the numberpad code. None of them work.
I tried using huawei frp removel tool but it seems like it needs that adb access that I dont have.
So what to try next?
same request, my son forgot pin and email password .... thanks
Related
Hey!
Changed my lock screen pin today, but apparently entered it wrong (twice?) so it wasn't what I thought it would be...
How do I go about unlocking it? I really don't wanna reset the device or install a new rom!
My Galaxy Nexus is rooted, I have gmail pw, ADB access and pin code...
Please help fast!
Thank you
if the phone still has access to the internet (wifi or data) then once you try to enter the lock pin incorrectly a few times it should ask you to login with your gmail password, which should then unlock the device allowing you to change the lock pin.
Failing that there are methods involving adb, do a search on google as I think some people have unlocked it using adb.
Hello, thanks for reading my thread. This is probably my first thread in xdadevelopers. So, I will describe my problem with FRP lock.
I just buy a two-handed phone from some people and yes, I forgot to check properly that they erase their Google Account to prevent FRP. I struggle to unlock this FRP lock. TalkBack bypass is not working since it is 7.2.0 version and since this phone didn't enable USB debugging. I can't run any command within ADB. I tried multiple ways to bypass FRP like SMS, Trying to USB debugging with *#*#2846579#*#* code, Tring to flash the ROM but not working at all. Can someone recommend me what to do? I really need help right now.
Thanks,
Best Regards.
there no way to remove frp for this phone except the test point method.
https://www.youtube.com/watch?v=BgUSEOCzExE
Hello,
I am really dumb and changed my phone pattern yesterday for one that i found fancy on the moment trying out different pattern. Well i forgot it.
I have a One Plus 6t and it's stock rom and locked bootloader, it does have secure boot enabled and it's encrypted.
Is there a way to unlock the phone without wiping data ?
I have access to my computer, the phone have adb enabled and the computer is administrator for the phone.
I can't have access to anything because i did restart it and now it doesn't unlock since it's encrypted.
Anyone have been in the same situation and found a workarround ?
I have some really important data inside that phone that are stored nowhere else.
Thanks
Note:
Connecting to PC and launching adb, it seems like it does take the command, is there anything i can do from there ?
lot of permission denied and 'adb locksettings' doesn't work
If there was a way to access the data without the password/pin/pattern, that would defeat the whole purpose of secure bootloader and encryption.
So no, there is no known way of doing this.
Have old https://www.gsmarena.com/ulefone_armor_2-10038.php with Android 7 using pin lock it has dev enabled but not rooted. Please provide tools to remove the authentication method. I searched over forum the posts either have missing drivers or simply don't remove the pin.
what is your goal? do you try to by-pass screen lock and recover data? do you want to remove FRP and just factory reset device?
Try to use latest tool for android with 7 its possible to read parten im not sure of pin code but miracle thunder box or login adition can do it if you dont have download unlock tool it will help you easy to remove pin only also if you faili to buy a license there's a tool I will send it the link for try but unlock tool Is better for your device
Hey folks,
my girlfriend just sold her P6 to a work friend and I wiped the device and thought "thats it". (I even removed the device from the Google Account!)
Sadly thats not it
The phone wants to have a/the? PIN of the device. We never set any PIN (which the google account confirms). What PIN is the device referring to?! Its not the lock-pin she normally used.
Nevertheless the device allows for a recovery via phone number and/or the old google account. We tried that and the P6 even lists the Name of my girlfriend and she gets a login notificiation on her new Pixel 7. But after entering the Password the P6 just say "an error occured, try again." (Ein Fehler ist aufgetreten)
But it doenst matter what we try or how often. We get always back to that screen and into the "an error occured".
So basically we/she are stuck. Any chance I can fix it with some ADB command or anything (dunno if the developer options are even switched on).
Thanks
Bastian
did you try reinstall the stock firmware?
there could be a few different pins
P.U.K is an acronym for Pin Unlock Key
Some carriers also put a SIM PUK on your SIM card when they sell you the SIM card
SIM Network Unlock Pin (NUP) is a code used to unlock an Android phone or iPhone from its original carrier so that it may be used on other carriers
picture of the error might help
tutibreaker said:
did you try reinstall the stock firmware?
Click to expand...
Click to collapse
I only did a factory reset via bootloader thingy on the phone.
nutzfreelance said:
there could be a few different pins
P.U.K is an acronym for Pin Unlock Key
Some carriers also put a SIM PUK on your SIM card when they sell you the SIM card
SIM Network Unlock Pin (NUP) is a code used to unlock an Android phone or iPhone from its original carrier so that it may be used on other carriers
picture of the error might help
Click to expand...
Click to collapse
I only got one in german....
man1acc said:
Hey folks,
my girlfriend just sold her P6 to a work friend and I wiped the device and thought "thats it". (I even removed the device from the Google Account!)
Sadly thats not it
The phone wants to have a/the? PIN of the device. We never set any PIN (which the google account confirms). What PIN is the device referring to?! Its not the lock-pin she normally used.
Nevertheless the device allows for a recovery via phone number and/or the old google account. We tried that and the P6 even lists the Name of my girlfriend and she gets a login notificiation on her new Pixel 7. But after entering the Password the P6 just say "an error occured, try again." (Ein Fehler ist aufgetreten)
But it doenst matter what we try or how often. We get always back to that screen and into the "an error occured".
So basically we/she are stuck. Any chance I can fix it with some ADB command or anything (dunno if the developer options are even switched on).
Thanks
Bastian
Click to expand...
Click to collapse
During setup, the unit asking for the pin refers to the screen lock pin or password that was used, and no other. You can try 0000 and see if that works, but it likely won't. If the error persists, contact Google and explain it to them. Only don't be surprised if they can't help you.
The only ways to fix this are as follows: 1) contact Google as mentioned, since there is an error in the process, or 2) attempt to unlock the bootloader. If you can successfully unlock the bootloader, then FRP should not kick in the next time the unit is started. If neither option is available, then ADB will not help you here, as by design Google makes it so FRP cannot be bypassed in so simple a manner.
Strephon Alkhalikoi said:
During setup, the unit asking for the pin refers to the screen lock pin or password that was used, and no other. You can try 0000 and see if that works, but it likely won't. If the error persists, contact Google and explain it to them. Only don't be surprised if they can't help you.
The only ways to fix this are as follows: 1) contact Google as mentioned, since there is an error in the process, or 2) attempt to unlock the bootloader. If you can successfully unlock the bootloader, then FRP should not kick in the next time the unit is started. If neither option is available, then ADB will not help you here, as by design Google makes it so FRP cannot be bypassed in so simple a manner.
Click to expand...
Click to collapse
Ok thanks, I'll contact Google.
There has been one PIN and never any else and this doesn't work.