My watch was restarting itself again and again and many times it stuck on Amazfit logo.
When it went through logo by chance so I apply factory reset. After that am unable to pair watch.. neither blue tooth is showing in mobile devices. I checked with another mobile with new and old version of Android. So far. Am sure that watch Bluetooth is disable by default.. anyone please help
Related
Hello there just bought an Amazfit 2 Stratos went home to pair it with my S8 Galaxy and i scanned the QR code everything was fine my phone recognized it but the watch showed me the QR again i tried 3-4 times again nothing. I went to my iPhone and paired it perfectly also updated the firmware then tried to unpair it from iPhone and test it on S8 again and still nothing happened . It scans the QR code my phone recognize the watch but on the watch screen i still see the QR screen instead of choosing left or right hand.
Thanks in advance.
Hello. Check is the watch is in the phone's BT settings, if it is there then remove and try to pair again. If it's not, try pairing with WiFi off on phone.
lfom said:
Hello. Check is the watch is in the phone's BT settings, if it is there then remove and try to pair again. If it's not, try pairing with WiFi off on phone.
Click to expand...
Click to collapse
Tried both nothing changed.
mixmasterr said:
Tried both nothing changed.
Click to expand...
Click to collapse
Are you using a custom ROM, Oreo-based? Oreo may block some permissions making pairing difficult.
lfom said:
Are you using a custom ROM, Oreo-based? Oreo may block some permissions making pairing difficult.
Click to expand...
Click to collapse
No im using a default one should i install a custom one if yes could you suggest me the best for S8 !
Thanks!
Sorry, I don't know any custom ROM for S8. But if the current one you have isn't 8.0+, then shouldn't be any problem pairing. My last 2 suggestions:
- Look for a Chinese version of Amazfit Watch app (current one is 2.4.0-CN, I think the one in APKMirror is the CN version), if your watch is the model A1609 it may pair only with CN Amazfit app;
- Try pairing with another phone with Android 7.1 or older, if it still doesn't pair then maybe there is a problem with the watch.
mixmasterr said:
Hello there just bought an Amazfit 2 Stratos went home to pair it with my S8 Galaxy and i scanned the QR code everything was fine my phone recognized it but the watch showed me the QR again i tried 3-4 times again nothing. I went to my iPhone and paired it perfectly also updated the firmware then tried to unpair it from iPhone and test it on S8 again and still nothing happened . It scans the QR code my phone recognize the watch but on the watch screen i still see the QR screen instead of choosing left or right hand.
Thanks in advance.
Click to expand...
Click to collapse
I received today my amazfit stratos (1619) and I've got exact the same problem (Samsung S8 with android 8.0.0). I think that we need to wait for the new official update which will support S8...
Just pair watch on any other phone (android 7 and below) and then log in to Amazfit App with the same account, watch should be paired. Worked for me.
Yes, this worked for some people that could not pair using Oreo:
This should work: pair the watch using your account and the other phone, then put watch in airplane mode (so it will disconnect from phone) and uninstall Amazfit app and remove watch from phone's Bluetooth settings (watch won't be unpaired, so no factory reset). Then go to your phone, make sure the watch isn't listed in Bluetooth settings, install the same app version used before, turn off airplane mode on watch and login to your account. The watch and phone should show the usual pair request with a pin code, confirm in both and they should be paired. If it doesn't happen then your phone's Bluetooth cannot see the watch for some reason... I have done this thousands times and it always worked if the phone can find the watch.
Click to expand...
Click to collapse
As i tried to make a firmware upgrade to my Amazfit Cor Band with the Notify&Fitness for Amazfit App, the band got stucked when the update initiated and remained so. Now, on the screen, there is only the circle that should fill up while the update progresses, and i cand do nothing else on it. What is your solution? How can i get the band going again? Is there some way to reboot or reset it?
I have the same problem, it began to try to update itself and will not connect to the phone, it's stuck in the update mode so it keeps failing to pair to the phone again after unpaired and app uninstalled, phone restarted etc. Is there a way to get it to 'reset'?
Sent from my Pixel 2 using Tapatalk
Recently my Amazfit BIP automatically updated and it stoped being able to connect via bluetooth.
So I tried to reset to factory settings and now the Amazfit is frozen an its screen only shows the icon of connecting the watch to the smartphone, and it's not possible to stop this process.
I've tried to use different apps to connect and although they can find the watch, they are unable to connect.
Have anyone faced a similar situation?
Wait till it drains out en then start it up again. U should see the pair to device icon
Hi there
I am struggling to pair the Amazfit Pace with my iphone. I scan the QR Code and get an Error Message that says I need to unpair the device from bluetooth. The problem is, it's not in the bluetooth list for me to unpair it. I tried other devices including an iPhone 5... same error issue. I reset my iPhone, I removed Amazfit App from the storage of my iPhone.
What is this error? What do I need to do? Is this an Amazfit App issue?
I cannot get past the QR Code screen to see or do anything more than drive myself crazy going to the bluetooth setting to remove the device, knowing full well, it's not in the list.
any help? Or is this a junk smart watch?
The watch is new? If yes, probably you must first update the firmware using and Android phone with Android 7.1 or older, or use a Huami tool to install at lest firmware 1.3.8. If it's not brand new, probably it was paired with another account, then you must first unpair it properly from that account...
Edit: if you haven't done it yet, restarting the watch a couple of times may help too.
Hi,
Its only been 5 days that i am using my new amazfit GTR 2 watch connected with Oneplus 7pro.
Since yesterday just this is showing on the watch (see attached file)
I just dont understand what to do..
I have tried uninstalling the app.. didnt help. Disconnecting reconnecting via Bluetooth did not help soft reset did not help. Cant hard reset the watch since its showing just this arrow..
Update starts V5.2.11.1 but when it starts it ends after saying UPDATE CANCELLED. MAKE SURE YOU ARE CONNECTED WITH THE APP.
JUST CANT UNDERSTAND WHAT TO DO
See if this thread helps.
Amazfit GTS (important not GTR) - after update boot loop
Hi i have Amazfit GTS i paired it with my Zepp app next i change some settings and app finded new update. After update the watch in "boot loop" mode. I unpair with my app and i would pair agin but the code QR is not show. I cant pair, on screen...
forum.xda-developers.com
Ali52415 said:
Hi,
Its only been 5 days that i am using my new amazfit GTR 2 watch connected with Oneplus 7pro.
Since yesterday just this is showing on the watch (see attached file)
I just dont understand what to do..
I have tried uninstalling the app.. didnt help. Disconnecting reconnecting via Bluetooth did not help soft reset did not help. Cant hard reset the watch since its showing just this arrow..
Update starts V5.2.11.1 but when it starts it ends after saying UPDATE CANCELLED. MAKE SURE YOU ARE CONNECTED WITH THE APP.
JUST CANT UNDERSTAND WHAT TO DO
Click to expand...
Click to collapse
Hi same issue with me .. please inform if u solved this prblm
Were you able to solve it?