i have a tablet ALPS SH-7208, but is installed a custom rom.
I would like to install another rom, stock or not, but i want to change the actual.
can someone help me to found a compatible rom and guide to install ?
Thank you
Below the system info
DROID INFO REPORT
DEVICE
Model: SH-7208 (tongjun72_et_jb3)
Manufacturer: alps
Baseband Version: MOLY.WR8.W1315.MD.WG.MP.V11.P1, 2014/01/02 19:58
RIL Version: mtk gemini ril 1.0
Build Number: ALPS.JB3.MP.V1.17
Build Fingerprint: alps/tongjun72_et_jb3/tongjun72_et_jb3:4.2.2/JDQ39/1404288553:user/test-keys
Bootloader: unknown
Java VM: Dalvik 1.6.0
OS Version: Jelly Bean MR1 (4.2.2)
SDK: 17
DISPLAY
Resolution: 600x1024 pixels
Software Density: 240 dpi (hdpi)
Refresh Rate: 0.49 Hz
PROCESSOR
CPU Architecture: ARMv7 Processor rev 3 (v7l)
Board: tongjun72_et_jb3
Chipset: MT6572
Cores: 2
Clock Speed: 806 MHz - 1209 MHz
Instruction Sets: armeabi-v7a, armeabi
CPU Features: swp half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpv4 idiva idivt
CPU Governor: hotplug
Kernel Version: 3.4.5
Kernel Architecture: armv7l
GRAPHICS
Renderer: Mali-400 MP
Vendor: ARM
OpenGL Version: OpenGL ES 2.0
RAM
Total: 972 MB
Java Heap: 96 MB
STORAGE
Internal: 1.3 GB
EXTERNAL: Not Detected
Click to expand...
Click to collapse
Stock ROM is here:
MT6572__alps__A736__tongjun72_et_jb3__4.2.2__ALPS.JB3.MP.V1.17. FLASHFILE ! FIRMWARE DOWNLOAD | CFirmware - Mobile Phone Flashing, Unlocking and, Latest Firmwares Available.
www.cfirmware.com
jwoegerbauer said:
Stock ROM is here:
MT6572__alps__A736__tongjun72_et_jb3__4.2.2__ALPS.JB3.MP.V1.17. FLASHFILE ! FIRMWARE DOWNLOAD | CFirmware - Mobile Phone Flashing, Unlocking and, Latest Firmwares Available.
www.cfirmware.com
Click to expand...
Click to collapse
i cannot download from this site, do you have alternatives ?
Related
I own a phone with these system specs:
Model: Primo D1(Walton)
Board: gionee75_6628_gb2
Display: Primo-D1
Hardware: mt6575
Android Version: 2.3.6
Kernel Architecture: armv7I
Kernel Version: 2.6.35.7(eng.android.1363795143)
Screen Resolution: 320x480
Screen Density: 160 dpi
Total RAM: 222 MB
Internel Storage: 0.13 GB
CPU Arch.: ARM Cortex-A9
Cores: 1
Revision: r2p10
GPU Vendor: Imagination Technologies
GPU Renderer: PowerVR SGX 531
There is no OTA update for this phone. Is it possible to update the android version by flashing a custom ROM? If can then please tell me how?
Yes I'm searching for the same thing... A junior of my asked me to help him... all I got was this... maybe this works.. try at your risk..http://forum.xda-developers.com/showthread.php?t=2004264 ...this thread shows how to root and install CWM recovery... Give me thanks if i helped
how it possible? have u facebook or whatsapp?
rokrifat said:
I own a phone with these system specs:
Model: Primo D1(Walton)
Board: gionee75_6628_gb2
Display: Primo-D1
Hardware: mt6575
Android Version: 2.3.6
Kernel Architecture: armv7I
Kernel Version: 2.6.35.7(eng.android.1363795143)
Screen Resolution: 320x480
Screen Density: 160 dpi
Total RAM: 222 MB
Internel Storage: 0.13 GB
CPU Arch.: ARM Cortex-A9
Cores: 1
Revision: r2p10
GPU Vendor: Imagination Technologies
GPU Renderer: PowerVR SGX 531
There is no OTA update for this phone. Is it possible to update the android version by flashing a custom ROM? If can then please tell me how?
Click to expand...
Click to collapse
Hello guys !
I would like to update the android on my phone. But the manufacturer did no more updates for it . Someone who understands please could put this firmware 4.2 for 5.1 or 6 ?
Original phone firmware:
https://mega.nz/#F!cAQ2HASR!2gUXEmevN5N6uhF8eAFDQg
Photos:
https://images.colombo.com.br/produtos/616800/616800_1223_g.jpg
http://img.olx.com.br/images/98/987616027766881.jpg
Specifications:
Mediatek: mediatek MT6572 - 1,00 ghz
cores: 2
Architecture: 2x ARM Cortex-A7 @ 1,00Ghz
Revision: r0p3
Process: 28nm
GPU Renderer: Mali-400mp
Model: TX340I (kt07_szy_v_wcdma)
Manufacturer: alps
Brand: JTY
Hardware: mt6572
Screen Size : 7
scree resolution: 480x 800 pixels
RAM: 512
Android version: 4.2.2
API level: 17
Bootloader: unknown
Build id: KT07.3G-20150209
Java VM- Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Architecture: armv7I
Kernel Version: 3.4.5 (unknown)
Identical Model device :
https://www.irulu.com/tablet/p-irulu-expro-x2-7-inch-phablet-gps-bluetooth-3g-phone-tablet-pc_1933422.html
https://en.wikipedia.org/wiki/List_of_devices_using_Mediatek_SoCs#MT6572
Help ! :highfive:
Hello all.
I have a non-prevalent android device that runs Android 4.2.2 by default (official).
I very searched to find suitable custom (unofficial) ROM for my device, but couldn't find.
I want to upgrade it's OS to Android 5.0 or above.
Good to notice that my device is not in the list of supported devices by ClockworkMod:
Rom Manager v5.5.3.7 message: GLX_TABLET_T3 does not have an officially supported ClockworkMod Recovery yet.
My device specifications (Got from CPU-Z v1.19):
SoC:
MediaTek MT8382 - 2Cores
Architecture: 2x ARM Cortex-A7 @ 1.30GHz
Revision: r0p3
Clock Speed: 598 MHz - 1.30 GHz
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
Scaling Governor: hotplug
Device:
Model: GLX_TABLET_T3 (GLX_TABLET_T3)
Manufacturer: GLX
Brand: XD813
Board: GLX_TABLET_T3
Hardware: mt8382
Screen Size: 4.56 inches (This value is incorrect! Correct Value: 7.0 inches)
Screen Resolution: 600 * 1024 pixels
Screen Density: 260 dpi (Correct Value: 170 dpi)
Total Ram: 970 MB
Internal Storage: 0.9 (Total phone storage is 8 GB)
System:
Android Version: 4.2.2
API Level: 17
Bootloader: unknown
Build ID: XD813_v0.2_GLX8037_SW1.2_20140613
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Aechitecture: armv7l
Kernel Version: 3.4.5 (eng.root.1402562709)
Root Access: Yes
Sensors:
ACCELEROMETER, PROXIMITY, LIGHT
Thanks in advance.
Mir-Ismaili said:
Hello all.
I have a non-prevalent android device that runs Android 4.2.2 by default (official).
I very searched to find suitable custom (unofficial) ROM for my device, but couldn't find.
I want to upgrade it's OS to Android 5.0 or above.
Good to notice that my device is not in the list of supported devices by ClockworkMod:Rom Manager v5.5.3.7 message: GLX_TABLET_T3 does not have an officially supported ClockworkMod Recovery yet.
My device specifications (Got from CPU-Z v1.19):
SoC:
MediaTek MT8382 - 2Cores
Architecture: 2x ARM Cortex-A7 @ 1.30GHz
Revision: r0p3
Clock Speed: 598 MHz - 1.30 GHz
GPU Vendor: ARM
GPU Renderer: Mali-400 MP
Scaling Governor: hotplug
Device:
Model: GLX_TABLET_T3 (GLX_TABLET_T3)
Manufacturer: GLX
Brand: XD813
Board: GLX_TABLET_T3
Hardware: mt8382
Screen Size: 4.56 inches (This value is incorrect! Correct Value: 7.0 inches)
Screen Resolution: 600 * 1024 pixels
Screen Density: 260 dpi (Correct Value: 170 dpi)
Total Ram: 970 MB
Internal Storage: 0.9 (Total phone storage is 8 GB)
System:
Android Version: 4.2.2
API Level: 17
Bootloader: unknown
Build ID: XD813_v0.2_GLX8037_SW1.2_20140613
Java VM: Dalvik 1.6.0
OpenGL ES: 2.0
Kernel Aechitecture: armv7l
Kernel Version: 3.4.5 (eng.root.1402562709)
Root Access: Yes
Sensors:
ACCELEROMETER, PROXIMITY, LIGHT
Thanks in advance.
Click to expand...
Click to collapse
I want this
Hello all,
I have upgrade firmware on my device, Teclast M16 get root. I notice there has no SuperSu/Su.
Then i try use SuperSu or Su or any of one click root from other Store (Not Google Store). Every work nothing. I look recovery in device, recovery is empty.
I get original firmware from chinese teclast website. Firmware has no existing in google search.
Here is original Firmware (Without Google App): gofile.io/?c=qTSyW2
Device
Model: X20L
Device Info: M16(M6P2)
Manufacturer: Teclast
Baseband Version: MOLY.LR11.W1630.MD.MP.V67.2, 2019/08/06 12:46
RIL Version: android reference-ril 1.0
Build Number: V1.02_20191209
Bootloader: unknown
Java VM: ART 2.1.0
OS Version: O (8.0.0)
SDK: 26
Resolution: 1080x1920 pixels (Full HD)
Software Density: 240dpi (hdpi)
Refresh Rate: 53.19 Hz
System
CPU Architecture: AArch64 Processor rev 4 (aarch64)
Board: mt6797
Chipset: MT6797X
Cores: 10
Clock Speed: 2002 MHz - 2002 MHz
Instruction Sets: arm64-v8a
CPU Features: fp asimd evtstrm aes pmull sha1 sha2 crc32
CPU Covernor: interactive
Kernel Version: 3.18.60
Kernel Architecture: aarch64
Graphics
Renderer: Mali-T880
Vendor: ARM
OpenGL Version: OpenGL ES 3.2
Click to expand...
Click to collapse
I wounder, which version of TWRP or other recovery could install on Teclast M16?
Thank you
Hello
I have this Android Smartphone (Android 9.0)
DEVICE
Model: ALIGATOR S5540 (ALIGATOR_S5540_EEA)
Manufacturer: magcomm
Version BASEBAND: MOLY.LR12A.R3.MP.V66.11,MOLY.LR12A.R3.MP.V66.11
version RIL: android reference-ril 1.0
Build number: PPR1.180610.011 release-keys
Sign software build: ALIGATOR/ALIGATOR_S5540_EEA/ALIGATOR_S5540:9/PPR1.180610.011/1567243468:user/release-keys
Bootloader: unknown
Java VM: ART 2.1.0
Verze OS: P (9)
SDK: 28
PROCESSOR
Architecture CPU: ARMv7 Processor rev 4 (v7l)
Main board: k39tv1_bsp
Chipset: MT6739WW
CPU units: 4
Frequency: 1495 MHz - 1495 MHz
Instructions: armeabi-v7a, armeabi
CPU functions: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm aes pmull sha1 sha2 crc32
CPU Governor: schedplus
Kernel: 4.4.146
Architecture: armv7l
RAM
Total: 1899 MB
Java Heap: 256 MB
But, I can't found this device on
//twrp.me/Devices/
Can anybody help and identify with which twrp image is my device compatible?
Best regards
Michal