here we have the hydrogen os camera from oneplus x, its got great basic features with full manual controls if you have camera2 api enabled , tested on cm13 by santosh rn3pro and works great, im using it for stock camera
i cant take any credit, as i just found it on the internet, while looking for a new camera app that i liked, without to many unneeded advanced features, hit thanks though if i helped at all
all credit to "STRATEGIST" for the build,
on the link below you can download either version, both seem to work great if you find a difference let me know, i tried them both but only quickly checked them and they seemed the same,
http://www.androidsage.com/2016/03/27/download-oneplus-2-camera-app-android-device/
DionT123 said:
here we have the hydrogen os camera from oneplus x, its got great basic features with full manual controls if you have camera2 api enabled , tested on cm13 by santosh rn3pro and works great, im using it for stock camera
i cant take any credit, as i just found it on the internet, while looking for a new camera app that i liked, without to many unneeded advanced features, hit thanks though if i helped at all
all credit to "STRATEGIST" for the build,
on the link below you can download either version, both seem to work great if you find a difference let me know, i tried them both but only quickly checked them and they seemed the same,
http://www.androidsage.com/2016/03/27/download-oneplus-2-camera-app-android-device/
Click to expand...
Click to collapse
How to enable camera2 api in MIUI 8 6.7.29?
rhizhalt said:
How to enable camera2 api in MIUI 8 6.7.29?
Click to expand...
Click to collapse
There's is a separate post in the guides section. Which explains how to. This is for the snapdragon/pro variant. I can't say for your version of miui yes or no. But there's a post just about that. So that would be the place to ask
Found here
http://forum.xda-developers.com/redmi-note-3/how-to/guide-how-to-enable-camera2-api-t3419579
Wow thanks, and this camera have beautify mode!
Sent from my Redmi Note 3 using XDA Labs
Good sharing, but i can't use manual setting. I've enabled camera 2 api, Manual camera, proshot and open camera works flawlessy, but with this i can't set my exposure time and iso. When i try to change vales, black screen, does'nt FC, but camera turns to black images. So black photo. Possible that have lost libraries?
thriller76 said:
Good sharing, but i can't use manual setting. I've enabled camera 2 api, Manual camera, proshot and open camera works flawlessy, but with this i can't set my exposure time and iso. When i try to change vales, black screen, does'nt FC, but camera turns to black images. So black photo. Possible that have lost libraries?
Click to expand...
Click to collapse
I notice the manual iso doesn't allow for full control. It works fine with shutter speed set to manual and manual iso. But when set to auto shutter speed. Iso adjustment doesn't go high enough. Leaving u with a very dark screen unless u use manual on both iso and shutter
Here's a photo moving my hand fast with .5s shutter speed and 100 iso. The values on manual iso/shutter need adjusting for this device but when both set to manual works great. I'm not a software writer so I can't. I could try but is that safe haha wonder if @TheStrix would wanna use this on the official cm13 build. Few adjustments and its a perfect stock camera. With the camera2 api functions
image linked below
http://imgur.com/79PuTCg
TIP OF THE DAY
INTRO
If you don't like the camera's quality it is because the google camera app is not the best for the grand prime, actually this is the problem of all ROMs based on the pure android, isn't the image clear enough? does the image looks blurred?
I've been comparing my camera on android oreo with my another phone (both are the same model), one has the stock Android and the other one has the pure Android 8 and the differences are huge, how to work around this problem?
Well... I have researched and talked to devs about this and it turns out that the drivers of the camera are the same as the stock firmware, but the only thing what changes the quality is how the image is processed by the camera application.
So who's the one to blame? The camera app.
What is the solution?
The real solution is to use ROMs based on the stock ROM, i.e. touchwiz, but I have noticed that many people still prefer using the pure Android so this solution is not possible. There is still another way.
CyanogenMod camera and fine adjustments
That's what you read, with the 'old' Cyanogen camera app you can have better pictures.
First, install this app
https://play.google.com/store/apps/details?id=com.maartendekkers.cyanapps
It's called Cyan Apps if the link isn't working.
and then...
Choose 'camera' on CM's 13 sectionNote: Don't choose the CM 14.1 version because it crashes when you start recording a video or change to frontal camera.
Download and install it.
Adjustments
Open the camera and go to settings, drag down until the last options and turn off the Denoise option, then go to the sharpness and set to the level 0 (or do whatever you think is better) and go to the picture quality and set to it 100%. The rest of the options you can leave in the default level.
Optional
You can, alternatively, with root access make this a system application and delete the other one just to have only one default camera for your ROM.
In the images attached below I want you to pay attention in the sharpness of the image and the quality, I hope you don't mind if I'm a bad photographer.
UPDATE: I know the link is broken and the reason is because the Cyan Apps has been removed from playstore, I don't know why, but you know now the secret to make the image good-looking, you have to turn off denoise option which comes by default turned on in all Samsung cameras. Find an APP that can make this for you. Best Regards
Holt sh*t dude.. it fixed my camera quality. Now the photo quality can be compared to stock cam.
Although now the photos are a little noisy and kinda looks little bad on low light..but it's really good on places with light.
Sent from my fortunave3g using XDA Labs
tasnim_tamim said:
Holt sh*t dude.. it fixed my camera quality. Now the photo quality can be compared to stock cam.
Although now the photos are a little noisy and kinda looks little bad on low light..but it's really good on places with light.
Sent from my fortunave3g using XDA Labs
Click to expand...
Click to collapse
Low light is always an enemy for the camera
This WILL also work on Snap-based (that's the camera included on most AOSP ROMs) cameras.
I have tried quite a few Gcam mods available for exynos devices but none of them seems working flawlessly.
Same
I have tried tge one from note 8 threat. It looks like taking a pic but dont store it. Also when i try lens blur the phone makes a sound from camera then force restarts itself.. It would be great to used it on this phone..
Its possible can it support gcam
Use this, set HDR + Auto exposure to stock camera2 api, or u can try other setting
https://drive.google.com/file/d/1SyiyFFVlrqCpCPG7PCTaU48RfzXGp8Vz/view?usp=drivesdk
Thanks for sharing. There are two issues.
1. Image is captured but not saved. It was saved initially, but fails to save after a while.
2. In portrait mode the image is in pinkish tint.
Will be grateful if some fix is suggested
samarann said:
Thanks for sharing. There are two issues.
1. Image is captured but not saved. It was saved initially, but fails to save after a while.
2. In portrait mode the image is in pinkish tint.
Will be grateful if some fix is suggested
Click to expand...
Click to collapse
I dont have thats issue. Image capture can saved to internal. Only portrait mode cant work
Will try another version..
Thank you
Only the first camera works, not the widescreen camera. Is there a fix?
maybe u want to trying gcam pixel 2 mod by serjo.
Any usable for pie? It restarts when I capture a picture.
dhenyaw said:
Use this, set HDR + Auto exposure to stock camera2 api, or u can try other setting
https://drive.google.com/file/d/1SyiyFFVlrqCpCPG7PCTaU48RfzXGp8Vz/view?usp=drivesdk
Click to expand...
Click to collapse
Make one for samsung m20 pie variant please
For Android 10?? anybody???
Sir galaxy m20 any gcam 7.3 mod
I'm totally speechless, today i swapped my S20 + for a OP8P, and TBH the camera is better but they where close.
I spent quite a bit of time, and as an avid GCAM user i tried MANY GCAM ports, all where pretty much crap, or not really better than stock, but, BUT! THAN, i found Parrot043 mod. I installed made my usual tweaks, and what i have saw is literally INSANE, this camera mod, literally destroy everything i have ever tried, and believe me i tried hundreds of them in my life.
1. If you have a previous GCAM, open the camera, hold and press on the icon on the homescreen, press app info, clear cache, and data.
2. Uninstall the app, reboot the phone. Than install Parrot 043 link > https://gofile.io/d/BpCWFx - also alternative host - https://easyupload.io/k6t42a
3. Go into the settings of the GCAM, turn on HDR enhanced, into advanced section, into HDR frames, and set 35, enable sabre, just under the HDR enhanced frames option.
4. Restart the camera app, go into darkness, take a photo with your camera app, and than take a photo with the GCAM mod, BE AMAZED.
P.S. Do not touch anything else, maybe turn on H265 for videos, and 4K for the back camera, increase video bitrate to 50mbps + and that's it.
P.P.S. ALWAYS make sure you have HDR enhanced on! it makes taking moving objects harder/blurry, but for low light its EPIC.
And here is camera comparasion of stock, night mode, and GCAM
Stock for scale,
https://i.ibb.co/cQf0BXC/IMG-20200602-040720.jpg
Stock night mode,
https://i.ibb.co/x7xwfN3/IMG-20200602-040433.jpg
GCAM ( personally tweaked)
https://i.ibb.co/2nPycDV/IMG-20200602-040511.jpg
It keeps crashing for me. Is there something I'm missing?
Truant_Luce said:
It keeps crashing for me. Is there something I'm missing?
Click to expand...
Click to collapse
1. What phone are you using?
2. Did you follow the steps suggested?
3. Do you have GCAM folder, with some configs installed?
4. Try with sabre off.
dazed1 said:
1. What phone are you using?
2. Did you follow the steps suggested?
3. Do you have GCAM folder, with some configs installed?
4. Try with sabre off.
Click to expand...
Click to collapse
OnePlus 8 Pro IN2025 10.5.8 xXx rom currently.
Had gcam installed from xXx, force stopped, cleared data, uninstalled with reflashing rom to remove as system app, then rebooted. Installed the other. Tried clearing data, rebooting again, made the one you recommended a system priv app, but it keeps crashing the moment I open it. I can't even open settings, because it crashes on open.
I have tried modifying the permissions, tried a previous version, still crashes on start. At the time, no other gcam folder.
Truant_Luce said:
OnePlus 8 Pro IN2025 10.5.8 xXx rom currently.
Had gcam installed from xXx, force stopped, cleared data, uninstalled with reflashing rom to remove as system app, then rebooted. Installed the other. Tried clearing data, rebooting again, made the one you recommended a system priv app, but it keeps crashing the moment I open it. I can't even open settings, because it crashes on open.
I have tried modifying the permissions, tried a previous version, still crashes on start. At the time, no other gcam folder.
Click to expand...
Click to collapse
Its the sabre i think, you need to somehow turn it off, sometimes older GCAM ports mix with new and bugs happen, its either that, or its the sabre. In order to fix this, IF IT IS THE SABRE, you will need to wipe cache data from recovery or even FORMAT the phone, look at the photos, the upgrade is ENORMOUS, but it depends of how much you need it, i would suggest for someone with the same version as your model/firmware, test the mod to see if its the sabre or not, i had this issue on my Mi Note 10, all GCAM ports looked the same, no improvements, i tried everything only the format make the settings change post installation.
EDIT, it might be even the rom! i just saw you are on custom, sorry buddy.
Always keen to give GCAM a go (not sure why i have such a soft spot for it lol)...
Anyways, thanks for sharing this. Attached are a few samples of me jumping into a store room with the door slightly opened (it's pretty dim inside).
Truant_Luce said:
OnePlus 8 Pro IN2025 10.5.8 xXx rom currently.
Had gcam installed from xXx, force stopped, cleared data, uninstalled with reflashing rom to remove as system app, then rebooted. Installed the other. Tried clearing data, rebooting again, made the one you recommended a system priv app, but it keeps crashing the moment I open it. I can't even open settings, because it crashes on open.
I have tried modifying the permissions, tried a previous version, still crashes on start. At the time, no other gcam folder.
Click to expand...
Click to collapse
I can confirm it's related to the xXx rom. Uninstalled completely and the camera installed and worked fine, but when you reinstall the camera breaks.
names said:
I can confirm it's related to the xXx rom. Uninstalled completely and the camera installed and worked fine, but when you reinstall the camera breaks.
Click to expand...
Click to collapse
Interesting. I wonder what is causing it to break?
Truant_Luce said:
Interesting. I wonder what is causing it to break?
Click to expand...
Click to collapse
I'm curious myself. After confirming, I installed other modded camera apk's and they work correctly.
This thread has me very interested.. @xXx - any chance you could glance at this at some point and see if it warrants inclusion in an xXx magisk rom future update? No pressure, just a thought. Some of the picture samples do indeed appear impressive! Thank you!!
Thanks for sharing this, will look deeper into it (presently on Urnyx GCam port).... Just as an info:
This GCam and many more ports are on Celsozavedos excellent Gcam Port hub !
happiboi said:
Always keen to give GCAM a go (not sure why i have such a soft spot for it lol)...
Anyways, thanks for sharing this. Attached are a few samples of me jumping into a store room with the door slightly opened (it's pretty dim inside).
Click to expand...
Click to collapse
The difference is much more apparent when there is less light, but even here the GCAM is superior. Can you post full res photos please? thanks.
s3axel said:
Thanks for sharing this, will look deeper into it (presently on Urnyx GCam port).... Just as an info:
This GCam and many more ports are on Celsozavedos excellent Gcam Port hub !
Click to expand...
Click to collapse
Urnyx is also great and stable, but sadly it lacks exposure in low light, (darker photos) and the noise reduction can kill details. Parrot can see where eyes cannot, very good.
OP camera is better in low light than this, and you can't use any of the other cameras, so until they solve that problem for the OP 8 pro I'll be sticking to the stock camera.
You lose more functionality than you gain in picture quality.
xgerryx said:
OP camera is better in low light than this, and you can't use any of the other cameras, so until they solve that problem for the OP 8 pro I'll be sticking to the stock camera.
You lose more functionality than you gain in picture quality.
Click to expand...
Click to collapse
Figured out the same. Low light is way to sharp and dark.
xgerryx said:
OP camera is better in low light than this, and you can't use any of the other cameras, so until they solve that problem for the OP 8 pro I'll be sticking to the stock camera.
You lose more functionality than you gain in picture quality.
Click to expand...
Click to collapse
saphirrot said:
Figured out the same. Low light is way to sharp and dark.
Click to expand...
Click to collapse
Well on european in2023 op8pro the low light picture quality on this gcam is 10 times better then op stock cam for sure!
And yes you lose ability of other cameras.
But for the moment this gcam is my friend in making low light pictures ?????
Thanks for sharing
dazed1 said:
I'm totally speechless, today i swapped my S20 + for a OP8P, and TBH the camera is better but they where close.
I spent quite a bit of time, and as an avid GCAM user i tried MANY GCAM ports, all where pretty much crap, or not really better than stock, but, BUT! THAN, i found Parrot043 mod. I installed made my usual tweaks, and what i have saw is literally INSANE, this camera mod, literally destroy everything i have ever tried, and believe me i tried hundreds of them in my life.
1. If you have a previous GCAM, open the camera, hold and press on the icon on the homescreen, press app info, clear cache, and data.
2. Uninstall the app, reboot the phone. Than install Parrot 043 link > https://gofile.io/d/BpCWFx - also alternative host - https://easyupload.io/k6t42a
3. Go into the settings of the GCAM, turn on HDR enhanced, into advanced section, into HDR frames, and set 35, enable sabre, just under the HDR enhanced frames option.
4. Restart the camera app, go into darkness, take a photo with your camera app, and than take a photo with the GCAM mod, BE AMAZED.
P.S. Do not touch anything else, maybe turn on H265 for videos, and 4K for the back camera, increase video bitrate to 50mbps + and that's it.
P.P.S. ALWAYS make sure you have HDR enhanced on! it makes taking moving objects harder/blurry, but for low light its EPIC.
And here is camera comparasion of stock, night mode, and GCAM
Stock for scale,
https://i.ibb.co/cQf0BXC/IMG-20200602-040720.jpg
Stock night mode,
https://i.ibb.co/x7xwfN3/IMG-20200602-040433.jpg
GCAM ( personally tweaked)
https://i.ibb.co/2nPycDV/IMG-20200602-040511.jpg
Click to expand...
Click to collapse
Hello. But this is good only for the night photo or is good in every situation? What is sabre option? We dont need to choose an xml file? Thanks and i like this tipe of treadh
mhhh i actually tried different google gcams but until now - and since the last update - the stock cam is the best one for me, just in case with a lot of ( direct sun)light (google gcam often blows the sky just into white) and also in dark environments the stock cam is better than the gcam. But i think, gcams and stock cam could be better with updates over time, the software for the sensor has a much higher optimization potential.
Flash-User said:
mhhh i actually tried different google gcams but until now - and since the last update - the stock cam is the best one for me, just in case with a lot of ( direct sun)light (google gcam often blows the sky just into white) and also in dark environments the stock cam is better than the gcam. But i think, gcams and stock cam could be better with updates over time, the software for the sensor has a much higher optimization potential.
Click to expand...
Click to collapse
This GCAM is different. Havent tested it alot in daylight, but it should win even in daylight. No the stock camera is not even close to being better or equal to GCAM, you can see in the picture, or test by yourself.
vuoshino said:
Hello. But this is good only for the night photo or is good in every situation? What is sabre option? We dont need to choose an xml file? Thanks and i like this tipe of treadh
Click to expand...
Click to collapse
No need for XML.
Sabre is a better HDR merge metod, it should offers better details especially in low light. Should be in every situation, test it, you got nothing to lose.
xgerryx said:
OP camera is better in low light than this, and you can't use any of the other cameras, so until they solve that problem for the OP 8 pro I'll be sticking to the stock camera.
You lose more functionality than you gain in picture quality.
Click to expand...
Click to collapse
What do you mean better than this, are you claiming that i did something wrong with the stock pictures?
And this camera mod is mostly for low light/night mode, you don't need to use it solo and not having the option to use other cameras, you can use both, you use GCAM for low light, and other cameras as needed.
Try it with the settings suggested, and you will forget that the main camera exist in low light.
s3axel said:
Thanks for sharing this, will look deeper into it (presently on Urnyx GCam port).... Just as an info:
This GCam and many more ports are on Celsozavedos excellent Gcam Port hub !
Click to expand...
Click to collapse
This camera destroys Urnyx in low light, its like 2 gen ahead. I tested it last night, took like 3 photos, and deleted Urnyx instantly, its not even close.
dazed1 said:
This GCAM is different. Havent tested it alot in daylight, but it should win even in daylight. No the stock camera is not even close to being better or equal to GCAM, you can see in the picture, or test by yourself.
No need for XML.
Sabre is a better HDR merge metod, it should offers better details especially in low light. Should be in every situation, test it, you got nothing to lose.
What do you mean better than this, are you claiming that i did something wrong with the stock pictures?
And this camera mod is mostly for low light/night mode, you don't need to use it solo and not having the option to use other cameras, you can use both, you use GCAM for low light, and other cameras as needed.
Try it with the settings suggested, and you will forget that the main camera exist in low light.
This camera destroys Urnyx in low light, its like 2 gen ahead. I tested it last night, took like 3 photos, and deleted Urnyx instantly, its not even close.
Click to expand...
Click to collapse
Why Do you hype this camera when a lot of people tell something different? I tried the mod already and as I said, the Stock cam is better (for me) also in lowlight. I tested it in a very dark room. Also for daylight shots Stock is a way better, just in the view of sharphness.
So, your hyped gcam mod isn't the mother of all cam apps...
Update: I tested again in another Environment and again, Stock is a lot better. Not sure what's wrong with your Stock cam. Are you running the latest Version? ??Seems there is anything wrong on your side. I for myself can't share your opinion.