Disabling Presidential alarm on LG G8X? - LG G8X ThinQ Questions & Answers

Hi all, my LG G8X was bought from Canada costco, and as all you Canadians know that our stupid alarm messages system(blaming CRTC) were broadcasting with presidential level which can no way to be disabled and super annoying that you gotten waken up several times in the morning 2am every month.
I wonder how does one disable the presidential alarm? Does it require first an unlocked bootloader? Any steps? thanks

Related

Screen Locking

My wife just got an LG G3 32Gb. We have it all configured with her emails and such. Due to having corporate email on her phone she has to enforce a 4 digit pin number to unlock it.
Every now and then the phone will auto lock itself a few seconds after unlocking it. Any ideas why? The phone is 1 day old. If its a hardware issue I will exchange it.
whitedragon551 said:
My wife just got an LG G3 32Gb. We have it all configured with her emails and such. Due to having corporate email on her phone she has to enforce a 4 digit pin number to unlock it.
Every now and then the phone will auto lock itself a few seconds after unlocking it. Any ideas why? The phone is 1 day old. If its a hardware issue I will exchange it.
Click to expand...
Click to collapse
I'm assuming this is a Verizon G3 (vs985) and that you are completely stock. If so, what software version are you on? 10b, 11c, or 12b? This is a known issue with stock ROMs and has to do with the "prevent accidental wake-up" option. I am unsure if this can be turned off on a stock ROM as I have been running Lollipop for several months now, but it can be turned off in the Display settings on most 5.0 based ROMs. Basically, your phone is using the proximity sensor to make sure its not accidentally being turned on in your pocket. So sometimes, the screen will turn on for a second, and then back off suddenly as a shadow or glare confuses the sensor into thinking it is in a pocket or somewhere else that it shouldn't be turning on. Turning this prevention setting off completely eradicated the issue for me, hopefully it can be done on a stock ROM as well.

2:18 and no alert

Did anyone using T-mobile get the test emergency alert at 2:18? My S9+ remained totally silent across 2:18 when other phones all over the building were howling. (Could this have anything to do with it using wifi for calling rather than 4G?)
Claghorn said:
Did anyone using T-mobile get the test emergency alert at 2:18? My S9+ remained totally silent across 2:18 when other phones all over the building were howling. (Could this have anything to do with it using wifi for calling rather than 4G?)
Click to expand...
Click to collapse
I have T-Mobile and received the alert. No idea why you wouldn't though. You couldn't opt out it as every major carrier in the US was alright with it. Consider yourself lucky I guess lol
My wife has an iPhone 6 and I have the S9+ on T-Mobile and we did not receive the alerts either. If the world were to end and us not be notified then ignorance is bliss...
Sent from my SM-G965U using Tapatalk

S9+ recent update disaster how can I get previous update reinstalled?

Yesterday I recieved an update on my s9+ (SM-G965U1) and it has become unusable. The phone was purchased overseas and has been working fine in Australia for the last year.
I keep getting a notification that IMS has stopped working, the touch screen is lagging badly and it is churning thru the battery. It is now also dropping out during calls and my messaging app wont open.
Can I reinstall the previous version? If so, how?
I am not hugely tech savvy but desperate for any help as phone is nearly unusable!

Good data signal strength to poor call strength?

My question/problem. What/why do I have a good 4 bars (of 5 bars) of data signal normally, but, when I decide to dial and make a telephone call, the signal strength goes to barely one bar as soon as I hit the dial button on the phone? I have not moved myself or the phone's location. The call may dial, but goes in and out and, more often than not, drops the call. At the same time, if I receive a call from someone, it is normally a much better signal, and does not drop or go in and out.
I am on Verizon phone (vs996) Frankenstein to us998 30b (pie). I have recently tried android 10 roms (Havoc, POSP). I don't know if that has anything to do with it or not? Very frustrating when trying to call someone.
Any thoughts or explanations or, hopefully, fixes?
Thx
gimpy1 said:
My question/problem. What/why do I have a good 4 bars (of 5 bars) of data signal normally, but, when I decide to dial and make a telephone call, the signal strength goes to barely one bar as soon as I hit the dial button on the phone? I have not moved myself or the phone's location. The call may dial, but goes in and out and, more often than not, drops the call. At the same time, if I receive a call from someone, it is normally a much better signal, and does not drop or go in and out.
I am on Verizon phone (vs996) Frankenstein to us998 30b (pie). I have recently tried android 10 roms (Havoc, POSP). I don't know if that has anything to do with it or not? Very frustrating when trying to call someone.
Any thoughts or explanations or, hopefully, fixes?
Thx
Click to expand...
Click to collapse
If you are using Verizon on US998 firmware, then you don't have access to VoLTE (which is phone calls over LTE, Voice over LTE). LTE started out as a data-only service but for actual phone calls, carriers were still using 3G HSPA or CDMA (Verizon, Sprint). When making a phone call, phones temporarily bump down to 3G, and then jump back to LTE after the phone call is over.
With the VoLTE protocol, that finally allowed phone calls with LTE. It added VOICE capability to LTE.
However, different carriers treat VoLTE differently. T-mobile allows VoLTE and Wi-Fi calling for US998 phones, while AT&T and Verizon are more stingy. They reserve VoLTE mostly for their branded phones running their carrier firmware.
I'm an AT&T customer and I've never had VoLTE because I've never used a branded AT&T phone. For me, on AT&T, when I make a phone call I am bumped down temporarily to AT&T HSPA. Then, after the phone call, it jumps back to LTE.
If I were to flash the AT&T TWRP flashable zip, possibly I could enable that. But it's not just firmware, it's also a setting on the carrier side that has to be enabled.
Bottom line, what's happening is you are seeing you STRONG LTE signal. But when you make a phone call, you are being temporarily bumped down to Verizon CDMA. However, Verizon is in the process of dismantling all their CDMA towers. That's why your CDMA signal is so weak. Verizon plans to shutdown CDMA entirely by end of 2020. After that, you will need VoLTE to make phone calls on Verizon.
Since you have an actual VS996, you can flash the VS996 TWRP-flashable zip. Once on that firmware, see if VoLTE is enabled on your account (carrier side setting) and see if when you make phone calls you stay on LTE and are not bumped down to CDMA?
Thx, Chazz. So, it's a Verizon thing? Not necessarily something I caused by going back and forth trying out the different Android 10 roms. Good to know. I will try the 996 rom later today, since I don't need the Hotspot for a couple of days. As always, you've been very helpful, thx. :good:
gimpy1 said:
Thx, Chazz. So, it's a Verizon thing? Not necessarily something I caused by going back and forth trying out the different Android 10 roms. Good to know. I will try the 996 rom later today, since I don't need the Hotspot for a couple of days. As always, you've been very helpful, thx. :good:
Click to expand...
Click to collapse
Yes, especially if you see strong LTE signal before making the phone call. Control freak Verizon (mostly) only allows VoLTE on Verizon firmware with Verizon branded phones. There may be exceptions (maybe Pixel phones?) and I know the ZTE Axon 7 (not a branded Verizon phone) somehow got VoLTE not only on ZTE stock firmware but also on LOS ROM -- but I believe ZTE paid Verizon to allow that. It's the exception that proves the rule.
Here's a a more in depth article about Verizon CDMA being shut down end of this year.
https://grantcountyreview.com/content/verizon-wireless-postpones-its-shutdown-3g-cdma networks
when Verizon closes its 2G and 3G networks at the end of 2020, 3G phones will become obsolete and non-VoLTE LTE phones will not be able to make or receive calls.
Click to expand...
Click to collapse
You DO have a Verizon VoLTE capable phone -- a Verizon VS996 -- but for V30 only on Verizon firmware. If you were using T-mobile with US998 firmware, you would have no problems with VoLTE or Wi-Fi calling. T-mobile is more open than Verizon about such perks.
I don't get VoLTE with AT&T on US998 firmware, but AT&T has no plans to end 3G HSPA anytime soon.
Chazz, I thought I would give a quick update. Late Last night/early this morning, I switched to vs99630c. I have made two phone calls, one to Florida, one to Washington state. Both connected and sounded so much better than when with the us99830b Rom. Even though both dialers had a little HD in the upper left hand corner. This Rom kept the same 3 or 4 bar designation for the signal strength. Much happier with it. Even though I don't have a hotspot (may have to pay the $10(?)or so to set it up, if I decide to stay on here.
Also, I have just seen a 99630c debloated Rom someone has made, that I might try in the next day or so.
I so wanted to try the android 10 Roms, but I just had too many small issues (reboots, no hot spot, system ui crashes, etc.).
Thnx, again for your help and guidance.
gimpy1 said:
Chazz, I thought I would give a quick update. Late Last night/early this morning, I switched to vs99630c. I have made two phone calls, one to Florida, one to Washington state. Both connected and sounded so much better than when with the us99830b Rom. Even though both dialers had a little HD in the upper left hand corner. This Rom kept the same 3 or 4 bar designation for the signal strength.
Much happier with it. Even though I don't have a hotspot (may have to pay the $10(?)or so to set it up, if I decide to stay on here.
Also, I have just seen a 99630c debloated Rom someone has made, that I might try in the next day or so.
I so wanted to try the android 10 Roms, but I just had too many small issues (reboots, no hot spot, system ui crashes, etc.).
Thnx, again for your help and guidance.
Click to expand...
Click to collapse
Then you are now probably using Verizon VoLTE, which is using LTE signal -- not the increasingly degraded CDMA signal Verizon will completely shut off December 31, 2020.
Verizon is probably already deprecating those towers -- leaving just enough, like when you're on the highways.
ChazzMatt said:
Then you are now probably using Verizon VoLTE, which is using LTE signal not the increasingly degraded CDMA signal Verizon will completely shut off December 31, 2020.
Verizon is probably already deprecating those towers -- leaving just enough, like when you're on the highways.
Click to expand...
Click to collapse
I really want volte and vowifi for my unlocked us998. The only way to have that is to flash the vs rom, which is 30c? I'm on US99820h, what do I lose by going to the vs rom? Is there a vs 20h variant?
ldeveraux said:
I really want volte and vowifi for my unlocked us998. The only way to have that is to flash the vs rom, which is 30c? I'm on US99820h, what do I lose by going to the vs rom? Is there a vs 20h variant?
Click to expand...
Click to collapse
Yes, we have Oreo VS996 KDZ. It's actually "20k", because it took Verizon two attempts to fully release LG V30 Oreo. And they released a couple extra updates for Verizon related bugs. So, although it's equivalent to US998 20h, it's a higher letter.
https://forum.xda-developers.com/lg-v30/development/vs996-lg-v30-verizon-vs996-t3865398
You need to have VoLTE enabled in your Verizon account, besides flashing this firmware. It helps to have it already enabled from a Verizon branded phone. But sometimes a helpful store rep willing to bend the rules can do it for you.
ChazzMatt said:
Yes, we have Oreo VS996 KDZ. It's actually "20k", because it took Verizon two attempts to fully release LG V30 Oreo. And they released a couple extra updates for Verizon related bugs.
https://forum.xda-developers.com/lg-v30/development/vs996-lg-v30-verizon-vs996-t3865398
You need to have VoLTE enabled in your Verizon account, besides flashing this firmware. It helps to have it already enabled from a Verizon branded phone. But sometimes a helpful store rep willing to bend the rules can do it for you.
Click to expand...
Click to collapse
I thought the Pie variants were not great, lots of broken features? Or was that just the US998 versions? What were the tradeoffs to staying on Oreo?
ldeveraux said:
I thought the Pie variants were not great, lots of broken features? Or was that just the US998 versions? What were the tradeoffs to staying on Oreo?
Click to expand...
Click to collapse
You asked for Verizon Oreo equivalent to US998 20h and that's what I gave you.
I'm not recommending Pie for US998.
Verizon Pie may be a lot better. I don't know. Someone using Verizon Pie will have to answer.
ChazzMatt said:
You asked for Verizon Oreo equivalent to US998 20h and that's what I gave you.
I'm not recommending Pie for US998.
Verizon Pie may be a lot better. I don't know. Someone using Verizon Pie will have to answer.
Click to expand...
Click to collapse
I misread, somehow thought the ROM you linked was Pie. My bad. I know dirty flash is never recommended, but could I get away with it here? What do I lose by going with the VS ROM over the US998? Apparently the only things I have to gain are VOLTE and possibly VVM?
ldeveraux said:
I misread, somehow thought the ROM you linked was Pie. My bad. I know dirty flash is never recommended, but could I get away with it here? What do I lose by going with the VS ROM over the US998? Apparently the only things I have to gain are VOLTE and possibly VVM?
Click to expand...
Click to collapse
Do you have VoLTE already enabled in your Verizon account?
You'll lose the no bloatware experience, but you can fix that with Titanium Backup.
As for dirty flashing, you can try... If it doesn't work, then you have to factory reset and clean install. Don't forget to reflash Magisk.
ChazzMatt said:
Do you have VoLTE already enabled in your Verizon account?
You'll lose the no bloatware experience, but you can fix that with Titanium Backup.
As for dirty flashing, you can try... If it doesn't work, then you have to factory reset and clean install. Don't forget to reflash Magisk.
Click to expand...
Click to collapse
I logged into my VZW account and after 8745 menus, finally found the HD Voice section. It says it's "Active", so I should be good for the VS ROM yes?
ldeveraux said:
I logged into my VZW account and after 8745 menus, finally found the HD Voice section. It says it's "Active", so I should be good for the VS ROM yes?
Click to expand...
Click to collapse
Seems like, yes.
I had to do a few steps to manually activate HD/VOLTE on my VS996 phone when I was on VZ. I documented the steps somewhere here (using ShortcutMasterLite). I know at least one other member here used the same steps on his phone. I'm thinking you'll be fine once you're on VS996.
I have not switched to Pie... still running Oreo. I have heard too many issues with Pie, so I have no desire to bother. I can't imagine VZ's Pie release is any better than Pie US998. VZ is too lazy to do anything else right, so why would they bother fixing what's wrong on US998.
Just want to quickly update this thread. I dirty flashed the VS99620K.zip in TWRP, then immediately flashed the latest Magisk zip. Everything updated perfectly, installed about 10 VZ apps, and I now have VOWIFI (and can send/receive texts!), though haven't been able to check VOLTE as I'm currently in a dead zone.
I'd already had HD calling active on my account, but can't select the option to also enable Video Calling. It says I need to contact support. I chatted multiple times with VZ support who claim it's active, though every time I try to enable it, it gives me the same error. What is this option, and do I need it? I'm pretty sure I was able to use Duo, Skype, Zoom, etc before the ROM update, am I spinning my wheels here?
Also, independent of this upgrade, my motion GIFs in any text app don't move. I thought it might have something to do with the non-VZ specific kernel, but after flashing, still just shows a static picture.
ldeveraux said:
I'd already had HD calling active on my account, but can't select the option to also enable Video Calling. It says I need to contact support. I chatted multiple times with VZ support who claim it's active, though every time I try to enable it, it gives me the same error. What is this option, and do I need it? I'm pretty sure I was able to use Duo, Skype, Zoom, etc before the ROM update, am I spinning my wheels here?
Click to expand...
Click to collapse
Are you the account holder? Some people can't get to it as they are just user.
https://community.verizonwireless.c...video-calling-feature-is-disabled/td-p/853001
I'm not sure what Verizon video calling is. I'm guessing some Verizon-only video chat -- like Apple's FaceTime is only for iOS? If you are already using Duo, Skype, Zoom, it would seem you don't need it. But you do make sure you have voice over LTE (VoLTE, called "HD calling" Verzion) --before end of this year.
ChazzMatt said:
Are you the account holder? Some people can't get to it as they are just user.
https://community.verizonwireless.c...video-calling-feature-is-disabled/td-p/853001
I'm not sure what video calling is. I'm guessing some Verizon-only video chat -- like Apple's FaceTime is only for iOS? If you are already using Duo, Skype, Zoom, you don't need it. But you do need to get voice over LTE.
Click to expand...
Click to collapse
I am the only user on this account, so definitely the account holder. After more wasted chats with VZ, they said that since my phone is not VZ branded, it's not eligible for Video Calling, which apparently is exactly as you described; Facetime for non-iphone Verizon users. I don't need that, as you said all my other platforms work fine.
How do I determine if VOLTE works? Like I said, I'm in a dead zone now, but going out to a good cell region in a few hours and can check then somehow. I did confirm that I can make calls and text over WiFi, so that's half the battle. How to check VOLTE?
ldeveraux said:
How do I determine if VOLTE works? Like I said, I'm in a dead zone now, but going out to a good cell region in a few hours and can check then somehow. I did confirm that I can make calls and text over WiFi, so that's half the battle. How to check VOLTE?
Click to expand...
Click to collapse
I think if you have Vo-WiFi that means your VoLTE is also activated. They seem to be packaged together.
If you make a call in a good signal area, see if the "4GLTE" icon stays on when you make the call. It may even change to VoLTE icon? or HD calling icon? A Verizon user can probably tell you better. But the key is to see if there are any status bar icon changes and what they are. Also see if there is any information in the dialer GUI during the call, where you click on the dialer timer.
Yeah, don't talk to VZ. They're too stupid to help and downright liars. Your phone will work fine on their network even if it's not VZ branded (I've used US998 and H931 phones on VZ without issue).
On my phone, I did have to do some setting changes in SML (ShortcutMasterLite) to get VOLTE working. I don't think most people have to do that, but I did... and I agree, I think that got VOWIFI working as well. I'm guessing you have both, too... just need to try it. If not, you can force-activate it as I documented earlier (via SML).

What model V60 to buy?

Good day,
I am a proud owner of a LG V20 H910 AT&T for about four years now.
Bought it back in early 2018 refurbished from ebay for about US$185.
I got very good service from this, I learned alot about roms, scripts, etc...
these are the issues I faced...
Very recently, phone started turning off when the battery is around or below 40%
After further investigation and cleaning the contacts, the battery seems to be swollen slightly.
Sometimes I can run it until below 20% until it powers down.
Lately I see it takes a long time to charge from this point.
The phone mic stopped working and gives of static noise/feedback to other caller until you switch to speakerphone then it works fine. This is for mobile calls and whatsapp/duo.
The headphone jack seems to short and stop music and activate google assistant every now and again.
This doesn't happen to all headphones, only some. If you don't move the phone or the cable, it works fine.
Download mode loads, but you get static on screen, tried reflashing with my stock and others but same.
Other than these problems, I totally love my v20 and it is still going.
I wanted to buy either a v50/v60/G8x.
I see LG is no longer making V series.
I like to tinker with mods and roms, what do you recommend
my max budget is ~US$220 and I see I can get these on ebay.
The main thing i like about my v20 is the dac, I use the force high impedance mode as I use it as a music player in my car's Hi-Fi. Is this possible on these units?
I want to go for the v60, what version TMO, Verizon, AT&T?,
I am on Digicel in Trinidad & Tobago. so this doesn't matter but what is the best version to buy for unlocking and future mods/dev.?
I remembered when I got the AT&T version of my v20, it never came with the Music app, and I only recently solved that issue.
Skylined said:
Good day,
I am a proud owner of a LG V20 H910 AT&T for about four years now.
Bought it back in early 2018 refurbished from ebay for about US$185.
I got very good service from this, I learned alot about roms, scripts, etc...
these are the issues I faced...
Very recently, phone started turning off when the battery is around or below 40%
After further investigation and cleaning the contacts, the battery seems to be swollen slightly.
Sometimes I can run it until below 20% until it powers down.
Lately I see it takes a long time to charge from this point.
The phone mic stopped working and gives of static noise/feedback to other caller until you switch to speakerphone then it works fine. This is for mobile calls and whatsapp/duo.
The headphone jack seems to short and stop music and activate google assistant every now and again.
This doesn't happen to all headphones, only some. If you don't move the phone or the cable, it works fine.
Download mode loads, but you get static on screen, tried reflashing with my stock and others but same.
Other than these problems, I totally love my v20 and it is still going.
I wanted to buy either a v50/v60/G8x.
I see LG is no longer making V series.
I like to tinker with mods and roms, what do you recommend
my max budget is ~US$220 and I see I can get these on ebay.
The main thing i like about my v20 is the dac, I use the force high impedance mode as I use it as a music player in my car's Hi-Fi. Is this possible on these units?
I want to go for the v60, what version TMO, Verizon, AT&T?,
I am on Digicel in Trinidad & Tobago. so this doesn't matter but what is the best version to buy for unlocking and future mods/dev.?
I remembered when I got the AT&T version of my v20, it never came with the Music app, and I only recently solved that issue.
Click to expand...
Click to collapse
Personally I went with the U.S. Cellular unlocked version.Or,you can go with the T-Mobile version.Prefer it be unlocked,and the reason I say those 2 is because at least the firmware is downloadable unlike the AT&T version.But,there is a Qfil copy of the AT&T version in the Q&A post.From my readings they're all IMPL locked and I haven't found away around that yet.
I would like to know too. coming from a v40 that i bought for $300 and it lasted 4 years... I hope to do a similar run with the v60.
Not too worried about updating past android 11. But it does kinda suck the security updates stop at June 2021. My v40 is stuck at 8/20, and I'm already noticing some apps dont work with Biometric anymore.
It took many years before the v40 was finally moddadable to lineage... and I'm sure someone will figure out the v60, but I also worry that WIFI calling won't work if it ever gets lineage.
That said, if I am on ATT, and want to use WIFI calling, I should buy an ATT branded model, correct? If I buy a global model, and run it on ATT, it likely won't work with WIFI calling?
resiny said:
I would like to know too. coming from a v40 that i bought for $300 and it lasted 4 years... I hope to do a similar run with the v60.
Not too worried about updating past android 11. But it does kinda suck the security updates stop at June 2021. My v40 is stuck at 8/20, and I'm already noticing some apps dont work with Biometric anymore.
It took many years before the v40 was finally moddadable to lineage... and I'm sure someone will figure out the v60, but I also worry that WIFI calling won't work if it ever gets lineage.
That said, if I am on ATT, and want to use WIFI calling, I should buy an ATT branded model, correct? If I buy a global model, and run it on ATT, it likely won't work with WIFI calling?
Click to expand...
Click to collapse
Yes,if you're on AT&T most definitely get the AT&T branded v60.With my V60 USC device it wouldn't make or receive any calls when the 3g shutdown hit.I had to cross flash my V60 with a Luns backup and that's the only way it would dial in and out again.I even went in to the engineering menu and enabled all the settings perfect for VoLTE and it still wouldn't call out.It's not IMEI specific either.I'm still trying to figure a work around for it,but nothing as of yet.
Ok. I just bought the lm-600am version

Categories

Resources