First of all, I am writing it using a translator because I can't speak English. Please understand even if the writing is awkward.
My device is the Japanese version of lg v60 (a001lg). There is no field test menu in the hidden menu of the Japanese version device. I opened the bootloader.
Is there a way to activate the blocked hidden menu? I'm trying to activate the volte. To do so, I'm going to activate ims setting.
The method I've tried so far.
I tried cross-flash with tmobile kdz. However, cross-flashing failed due to different partition structures.
"operatorlogging" "eri" "carrier" "persdata" "OP_a" "OP_b" There's no partition.
I tried to activate the volte provided. I failed.
It seems certain that the file inside the device is in the hidden menu.
Please advise on how to activate the cross-flashing or hidden menu.
andamiro00 said:
First of all, I am writing it using a translator because I can't speak English. Please understand even if the writing is awkward.
My device is the Japanese version of lg v60 (a001lg). There is no field test menu in the hidden menu of the Japanese version device. I opened the bootloader.
Is there a way to activate the blocked hidden menu? I'm trying to activate the volte. To do so, I'm going to activate ims setting.
The method I've tried so far.
I tried cross-flash with tmobile kdz. However, cross-flashing failed due to different partition structures.
"operatorlogging" "eri" "carrier" "persdata" "OP_a" "OP_b" There's no partition.
I tried to activate the volte provided. I failed.
It seems certain that the file inside the device is in the hidden menu.
Please advise on how to activate the cross-flashing or hidden menu.
Click to expand...
Click to collapse
Try to install this app
openbox909 said:
Try to install this app
Click to expand...
Click to collapse
Thank you for your answer.
The app will not be installed.
Dial *#546368#*600#
Field test
Edit - oh I just read your original post again. You don't have field test. Maybe you can try using different APN settings.
Airtioteclint said:
*#546368#*600#을 누르십시오.
현장시험
편집 - oh 나는 방금 너의 원래 글을 다시 읽었어. 현장검증도 안 하고. 다른 APN 설정을 사용해 보십시오.
Click to expand...
Click to collapse
대답해줘서 고마워.
현재 한국에서 사용되고 있으며 다른 apn으로 변경하려고 했지만 볼트를 사용할 수 없었다.
나는 이 문제로 소프트뱅크에 연락했다.
소프트뱅크는 자사 회사인 유심만 볼트를 사용할 수 있다고 밝혔다.
숨겨진 메뉴를 열어야 할 것 같은데 슈퍼 유저로서도 어떻게 풀어야 할지 모르겠다.
Hello. Have you upgraded it to android 11?
And could you dump to help me, i finding it!
kim12355 said:
Hello. Have you upgraded it to android 11?
And could you dump to help me, i finding it!
Click to expand...
Click to collapse
Yes, it's Android 11.
How can I help you?
andamiro00 said:
Yes, it's Android 11.
How can I help you?
Click to expand...
Click to collapse
I need a001lg android 11 modem ab, also ftm if you accept
Could you dump it and send it to me?
kim12355 said:
I need a001lg android 11 modem ab, also ftm if you accept
Could you dump it and send it to me?
Click to expand...
Click to collapse
Modems a and b can be sent.
Can you tell me why FTM is needed?
And do you mean you need a dump file with LG up?
I'm watching it through a translator. It's translated weirdly. Are you saying you need a dump file, too?
andamiro00 said:
Modems a and b can be sent.
Can you tell me why FTM is needed?
And do you mean you need a dump file with LG up?
I'm watching it through a translator. It's translated weirdly. Are you saying you need a dump file, too?
Click to expand...
Click to collapse
You can follow these steps in bootloader unlock instruction and just open partition manager in qfil. Then you can see all partitions in your v60 (some are hidden). Find modem a and modem b, right click on it select first row and click read to dump it
kim12355 said:
You can follow these steps in bootloader unlock instruction and just open partition manager in qfil. Then you can see all partitions in your v60 (some are hidden). Find modem a and modem b, right click on it select first row and click read to dump it
Click to expand...
Click to collapse
I uploaded a modem file.
Check it out.
I hope the modem is activated.
I don't think I can upload it on xda because the modem is big. Is there any way to send it to an email or somewhere else?
andamiro00 said:
I uploaded a modem file.
Check it out.
I hope the modem is activated.
I don't think I can upload it on xda because the modem is big. Is there any way to send it to an email or somewhere else?
Click to expand...
Click to collapse
Yes it more than 300mb i remember
You can upload to google drive?
kim12355 said:
Yes it more than 300mb i remember
You can upload to google drive?
Click to expand...
Click to collapse
https://drive.google.com/file/d/1doaPOGk38hx40kw6Qse50FZvQzQGwWvR/view?usp=sharing,
modem_a_oragin.bin
drive.google.com
Download it.
andamiro00 said:
Modems a and b can be sent.
Can you tell me why FTM is needed?
And do you mean you need a dump file with LG up?
I'm watching it through a translator. It's translated weirdly. Are you saying you need a dump file, too?
Click to expand...
Click to collapse
I need ftm because somehow i bought. My ftm not original
But it still work normally but i lost combo hard button to enter factory data reset. That why i ask it
kim12355 said:
I need ftm because somehow i bought. My ftm not original
But it still work normally but i lost combo hard button to enter factory data reset. That why i ask it
Click to expand...
Click to collapse
Please leave a comment when you have received the modem file.
FTM files are difficult to share.
However, if you need anything, I can let you know if you call the hexa code offset number.
andamiro00 said:
Please leave a comment when you have received the modem file.
FTM files are difficult to share.
However, if you need anything, I can let you know if you call the hexa code offset number.
Click to expand...
Click to collapse
thank you!!!! first i flashed it on android 10 base and i have signal. it is a nice ensign that it will make fingerprint work on android 11
my v60 it already crossflashed by somehow before i bought it. it have impl 0 and i can crossflash any version but signal only work with original modem.
about i just wanna edit imei and sn then restore in my v60. it not important with me because my v60 it just lost hard combo button enter factory data reset
thank you again <3. im upgrading to android 11, and see will fingerprint work!!
kim12355 said:
thank you!!!! first i flashed it on android 10 base and i have signal. it is a nice ensign that it will make fingerprint work on android 11
my v60 it already crossflashed by somehow before i bought it. it have impl 0 and i can crossflash any version but signal only work with original modem.
about i just wanna edit imei and sn then restore in my v60. it not important with me because my v60 it just lost hard combo button enter factory data reset
thank you again <3. im upgrading to android 11, and see will fingerprint work!!
Click to expand...
Click to collapse
If possible, could you tell me how you cross-flash? I also cross-flash on t-mobile, but failed. There was an error like the picture.
andamiro00 said:
If possible, could you tell me how you cross-flash? I also cross-flash on t-mobile, but failed. There was an error like the picture.
Click to expand...
Click to collapse
like i said that it crossflashed before i bought it so i dont know how.
but i think medusa pro box can do it. and also make a full dump of your device.
maybe leronex on discord can help you
pm me in telegram (Mama Tao)
kim12355 said:
like i said that it crossflashed before i bought it so i dont know how.
but i think medusa pro box can do it. and also make a full dump of your device.
maybe leronex on discord can help you
pm me in telegram (Mama Tao)
Click to expand...
Click to collapse
Congratulations on your successful communication.
There was hope, but it disappeared again. The information is appreciated.
andamiro00 said:
Congratulations on your successful communication.
There was hope, but it disappeared again. The information is appreciated.
Click to expand...
Click to collapse
It so much risks to do it. Because we dont have any experience about it (that why you need to make full dumps, i mean full backup partitions). But your v60 still have L1 winevine right?
After do that and successful your impl will return zero and winevine will be changed to L3
Related
why do you need to backup your IMEI / another method click here?
- Download & install
- ROOT requires
https://docs.google.com/file/d/0B3J7gOQH7ViEWUp0VUVGdE5ZRVE/edit?usp=sharing
Permission
Can you verify the authentic properties of this program? I'm wary of using programs that I am unsure about that require root... especially from a non-recognized developer.
No offense meant just curious.
Thanks
dajmanjt said:
Can you verify the authentic properties of this program? I'm wary of using programs that I am unsure about that require root... especially from a non-recognized developer.
No offense meant just curious.
Thanks
Click to expand...
Click to collapse
You can read permission
so this is just backin up the 2 efs partitions, modemst1 and modemst2? but in app form instead of my script?
the efs backup function has also been added to TWRP.
this could be useful until TWRP is working for the D802 international variant.
paratox said:
this could be useful until TWRP is working for the D802 international variant.
Click to expand...
Click to collapse
Here is a working TWRP for the D802 international variant. Link ::: http://forum.xda-developers.com/showthread.php?t=2469995 :good:
How can repair my imei? I found this app too late. TIA
Or does someone have a zeroed out backup? PLZ reply I need this badly.
Edit: My esn is all zero's after bricking/unbricking.
tegezee said:
Or does someone have a zeroed out backup? PLZ reply I need this badly.
Edit: My esn is all zero's after bricking/unbricking.
Click to expand...
Click to collapse
you should probably create a new thread and get help for this. Like the link in the OP said, efs folder are unique to each device because it also contain imei/esn number. Using someone else back up wont help you with your phone. maybe theres a different fix.
super114 said:
you should probably create a new thread and get help for this. Like the link in the OP said, efs folder are unique to each device because it also contain imei/esn number. Using someone else back up wont help you with your phone. maybe theres a different fix.
Click to expand...
Click to collapse
I will but, You can zero out the 3 efs img files to get zeroed out meid & esn locations. As seen in this thread!!! It's called EFS Backup/Restore/Repair...
I have a problem with lost IMEI ..... but i didn't do any back up IMEI ... can we fix it ?
reachheng said:
I have a problem with lost IMEI ..... but i didn't do any back up IMEI ... can we fix it ?
Click to expand...
Click to collapse
We could if we had something that would allow these files to be converted to a format that is readable by a hex editor, and then convert them back. I have been trying to find something like this for a while but I can't find anything. If anyone knows and would be willing to share, I am sure a great many of us would appreciate it!
Tks @hoangnova :good:
This is my last ditch effort. Small back story: I somehow wiped EVERYTHING on my G2. EFS partition, ESN, data, SIM info., everything with dialer codes. All of my network information reads "unknown". I tried many methods from here on the forums to get this data back and it turns out I have lost my EFS partition- DNA for the network? I sent it to LG to get it fixed, having done a hard reset and leaving no trace of root. They sent it back without even asking and did no repairs. The note said "board bent". WTF?? How does the user bend the main board, especially when I never opened it? They voided my warranty and ripped off my IMEI/MEID sticker from the back of the phone.
Anyways, I am here with a brick. No network still. Here is what I have done:
1) .tot method to ZVC. Several more times... once to ZV7 where I lost touch capability. Luckily saved my arse with a micro->usb cable and a mouse.
2) attempted to root with ioroot25. Failed because the phone WILL NOT find recovery mode. adb, voldown+pwr then again from power off, and apps are unable to force the phone into recovery mode. I assume it is possible that my recovery mode is deleted?
3) Would have tried all of these "rewrite your efs/imei/etc" things but I can't do any without root. Can't root without recovery, can I?
4) Spent the last two weeks scouring the internet for a fix and going back to my Epic 4G temporarily.
Please help me, has anyone seen this before? Can anyone help me fix it? I am to the point where I would pay to have it fixed. Any experts out there? XDA has yet to let me down... I just need to know if I can fix it or if it is a brick so I can go searching for an old Sprint GS3.
Thanks all,
baublitz
deleted
hoangnova said:
why do you need to backup your IMEI / another method click here?
- Download & install
- ROOT requires
https://docs.google.com/file/d/0B3J7gOQH7ViEWUp0VUVGdE5ZRVE/edit?usp=sharing
Permission
Click to expand...
Click to collapse
One question,
I can not really back up the IMEI and EFS by solid explorer or TWRP?
I'm a newbie!
For all lg devices? or only G2?
after flashing d800 with tot i lost the imei of the phone
how to repair it?
I hope someone can help me..
Coming from stock firmware sprint Android 10.
Flashed ROM][CrDroid][11][UNOFFICIAL][RAV*/SOFIA*][7.X
Everything went flawlessly expect when boot I have no data.
Any suggestions please
darko454 said:
I hope someone can help me..
Coming from stock firmware sprint Android 10.
Flashed ROM][CrDroid][11][UNOFFICIAL][RAV*/SOFIA*][7.X
Everything went flawlessly expect when boot I have no data.
Any suggestions please
Click to expand...
Click to collapse
Make sure the correct APN is selected. If yes, look at the values inside of APN and then verify that they are correct. Google Sprint APN settings.
tcaudill01 said:
Make sure the correct APN is selected. If yes, look at the values inside of APN and then verify that they are correct. Google Sprint APN settings.
Click to expand...
Click to collapse
If you are referring to carrier settings under network and internet nothing happens when try to click
darko454 said:
If you are referring to carrier settings under network and internet nothing happens when try to click
Click to expand...
Click to collapse
Under "Network and Internet", select "Mobile Network", scroll to the bottom and select "Access Point Names". From there you should be able to see what carrier APN you have selected. If there is none, try pressing the "+" and add your own.
darko454 said:
If you are referring to carrier settings under network and internet nothing happens when try to click nothing
Click to expand...
Click to collapse
tcaudill01 said:
Under "Network and Internet", select "Mobile Network", scroll to the bottom and select "Access Point Names". From there you should be able to see what carrier APN you have selected. If there is none, try pressing the "+" and add your own.
Click to expand...
Click to collapse
thanks for the quick reply but when I click carrier settings nothing opens
I might reflash without sim card
No APN settings is why you have no data. I would try a reflash.
darko454 said:
thanks for the quick reply but when I click carrier settings nothing opens
Click to expand...
Click to collapse
darko454 said:
thanks for the quick reply but when I click carrier settings nothing opens
I might reflash without sim card
Click to expand...
Click to collapse
Ok so I re flashed with out sim,tried to install sim after boot, same result
darko454 said:
Ok so I re flashed with out sim,tried to install sim after boot, same result
Click to expand...
Click to collapse
For ****s and giggles, I would try another ROM. Better yet, I would restore back to stock and then try another install. That takes more time but will help ensure that you are starting from the most stable platform. If you go this route, remember to not restore stock 11, it will bootloop if you try to install a ton over it.
tcaudill01 said:
For ****s and giggles, I would try another ROM. Better yet, I would restore back to stock and then try another install. That takes more time but will help ensure that you are starting from the most stable platform. If you go this route, remember to not restore stock 11, it will bootloop if you try to install a ton over it.
Click to expand...
Click to collapse
I haven't flash gapps yet
Could it be that I haven't installed gapps
Not sure how to restore stock Android 10
Thanks
darko454 said:
I haven't flash gapps yet
Could it be that I haven't installed gapps
Not sure how to restore stock Android 10
Thanks
Click to expand...
Click to collapse
Nothing to do with Gapps, this is a radio issue. Something didn't install correctly.
Here is a great guide to make sure you get Android 10 and not 11; https://forum.xda-developers.com/t/how-to-downgrade-android-11-to-10.4283809/
tcaudill01 said:
Nothing to do with Gapps, this is a radio issue. Something didn't install correctly.
Here is a great guide to make sure you get Android 10 and not 11; https://forum.xda-developers.com/t/how-to-downgrade-android-11-to-10.4283809/
Click to expand...
Click to collapse
ok I compared the highlighted firmware from lolinet.com and the actual LMSA firmware (downloaded automatically) they look the same, also I see Fastboot_Mot_V1 not sure what's that for
my question is should I flash the LMSA firmware (downloaded automatically) with Fastboot_Mot_V1 or should I replace it with lolinets firmware? Just making sure
darko454 said:
ok I compared the highlighted firmware from lolinet.com and the actual LMSA firmware (downloaded automatically) they look the same, also I see Fastboot_Mot_V1 not sure what's that for
my question is should I flash the LMSA firmware (downloaded automatically) with Fastboot_Mot_V1 or should I replace it with lolinets firmware? Just making sure
Click to expand...
Click to collapse
Please READ all the steps in this guide before starting and follow their process.
How to downgrade Android 11 to 10
I unfortunately decided to upgrade my Moto G Power 2020 to Android 11 when the update was available and have had many issues most of which is that it is now very slow and battery drain is much higher. Have tried the many suggestions online to...
forum.xda-developers.com
tcaudill01 said:
Please READ all the steps in this guide before starting and follow their process.
How to downgrade Android 11 to 10
I unfortunately decided to upgrade my Moto G Power 2020 to Android 11 when the update was available and have had many issues most of which is that it is now very slow and battery drain is much higher. Have tried the many suggestions online to...
forum.xda-developers.com
Click to expand...
Click to collapse
thanks
I just reflashed stock firmware, rooted stock, backed up apn config.xml file.
Flashed [ROM][CrDroid][11][UNOFFICIAL][RAV*/SOFIA*][7.X]
Replaced apn config.xml file. system/product/ect.
still no lte
Tried same process but with [ROM][RAV*/SOFIA*][10][UNOFFICIAL] LineageOS 17.1
same no Lte
darko454 said:
thanks
I just reflashed stock firmware, rooted stock, backed up apn config.xml file.
Flashed [ROM][CrDroid][11][UNOFFICIAL][RAV*/SOFIA*][7.X]
Replaced apn config.xml file. system/product/ect.
still no lte
Tried same process but with [ROM][RAV*/SOFIA*][10][UNOFFICIAL] LineageOS 17.1
same no Lte
Click to expand...
Click to collapse
Does LTE show on stock? From Lineage or CrDroid were you able to find where you add or change the son? From either one, have you tried *#*#4636#*#* from the dial pad? You can change a lot of network specific things from there. You could try changing different band combinations to see if you can get a connection. You can also see what towers you are connecting to.
darko454 said:
thanks
I just reflashed stock firmware, rooted stock, backed up apn config.xml file.
Flashed [ROM][CrDroid][11][UNOFFICIAL][RAV*/SOFIA*][7.X]
Replaced apn config.xml file. system/product/ect.
still no lte
Tried same process but with [ROM][RAV*/SOFIA*][10][UNOFFICIAL] LineageOS 17.1
same no Lte
Click to expand...
Click to collapse
Did some searching and looks like other Sprint users had the same issue.
Search results for query: Sprint
forum.xda-developers.com
tcaudill01 said:
Did some searching and looks like other Sprint users had the same issue.
Search results for query: Sprint
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks for the Info
Is there any way developers can help us?
darko454 said:
Thanks for the Info
Is there any way developers can help us
Click to expand...
Click to collapse
darko454 said:
hey is it possible to use another firmware from a similar device like moto stylus?
Click to expand...
Click to collapse
Any info please
tcaudill01 said:
Nothing to do with Gapps, this is a radio issue. Something didn't install correctly.
Here is a great guide to make sure you get Android 10 and not 11; https://forum.xda-developers.com/t/how-to-downgrade-android-11-to-10.4283809
Click to expand...
Click to collapse
is there any way to make a backup from the stock rom radio ,then flash it to custom rom ??
thanks
Hi,
I'm using GSI-treble CAOS 11. I recently moved to the US and I don't seem to get 3G/4G in the US. 3G/4G worked when tried on another phone with the same sim.
I'm using a ANE-AL00. Is it a baseband issue? Any thoughts?
And I'm getting connected to 2.4Ghz wifi only, not sure if it's a bug.
Thanks
balamu96m said:
Is it a baseband issue?
Click to expand...
Click to collapse
Hello, it's very likely...
Look here
-Alf- said:
Hello, it's very likely...
Look here
Click to expand...
Click to collapse
I checked for the phone for which data is working and it also has similar support levels for the bands.
I'm trying flash stock ROM to see if it helps.
Thanks
balamu96m said:
I'm trying flash stock ROM to see if
Click to expand...
Click to collapse
Try eRecovery, using option "Download latest version and recovery".
https://forum.xda-developers.com/t/...ndroid-11-stable-so-far.4222155/post-84460297
The second method is flashing Service ROM aka fullStock ROM via dload method, but this process will erase all your data and lock bootloader again.
-Alf- said:
Try eRecovery, using option "Download latest version and recovery".
https://forum.xda-developers.com/t/...ndroid-11-stable-so-far.4222155/post-84460297
The second method is flashing Service ROM aka fullStock ROM via dload method, but this process will erase all your data and lock bootloader again.
Click to expand...
Click to collapse
I tried the eRecovery auto update but it always fails to get update details for me after connecting to WiFi.
With the load method, although the bootloader gets locked, I can unlock using the same unlock code right?
balamu96m said:
the same unlock code right?
Click to expand...
Click to collapse
Right, each bootloader code is permanent, it wont expire.
What is your model and build number? (for example, 9.1.0.257(C432E6R1P7) )
-Alf- said:
Right, each bootloader code is permanent, it wont expire.
What is your model and build number? (for example, 9.1.0.257(C432E6R1P7) )
Click to expand...
Click to collapse
Mine is 9.1.0.314(C675E9R1P3)
Will flashing a different modem.img work?
balamu96m said:
Will flashing a different modem.img work?
Click to expand...
Click to collapse
I don't know, I've never tried it .
Maybe this will help you:
https://forum.xda-developers.com/t/full-network-mode-preferences-on-gsi.4342225/
Or try this solution:
In SetEdit app:
1. + 'Add new setting' at the top.
2. Key in:
hw_add_4g_only
3.Tap Save.
4. In 'Edit setting', enter your mobile country code , can be found in your current APN Accses Point -> MCC . (or look for your mobile country code here )
5. Tap Save changes, close app and restart your phone.
-Alf- said:
I don't know, I've never tried it .
Maybe this will help you:
https://forum.xda-developers.com/t/full-network-mode-preferences-on-gsi.4342225/
Or try this solution:
In SetEdit app:
1. + 'Add new setting' at the top.
2. Key in:
hw_add_4g_only
3.Tap Save.
4. In 'Edit setting', enter your mobile country code , can be found in your current APN Accses Point -> MCC . (or look for your mobile country code here )
5. Tap Save changes, close app and restart your phone.
Click to expand...
Click to collapse
Thanks! I'll look into it. But I flashed stock EMUI9.1 and still, the network works only on EDGE. So, I guess it has something with hardware/firmware. I don't know the difference between LX1 and ANE-AL00 in terms of hw...wondering if I should try LX1/LX2 stock rom..
balamu96m said:
wondering if I should try LX1/LX2 stock rom..
Click to expand...
Click to collapse
I would not recommend ...
You can install only firmware for your regional variant - Al00 (C675), for example this one .
(Cxxx) is very important in determining the correct firmware to download.
-Alf- said:
I would not recommend ...
You can install only firmware for your regional variant - Al00 (C675), for example this one .
(Cxxx) is very important in determining the correct firmware to download.
Click to expand...
Click to collapse
JFYI - https://forum.xda-developers.com/t/changing-lte-bands.3769176/
-Alf- said:
JFYI - https://forum.xda-developers.com/t/changing-lte-bands.3769176/
Click to expand...
Click to collapse
Thanks again!
So, based on that, I flashed LX3 oeminfo and LX3 stock from. My phone is now rebranded to LX3 but still, I'm getting only EDGE! Probably that's all I can do I guess. I'll check with the operator once but then I don't have much hope too!
Anyway it was an interesting exercise (also consumed a lot of time)
Cheers!
I was cleaning up the carrier file while cleaning up with "adb_appcontrol".
The apk is all backed up.
It is in infinite booting state in the lg logo.
fastboot- ok
QFIL-ok
Download mode-ok
It is possible. a001lg (Japanese version of lg v60) cannot obtain kdz.
That's why you can't put kdz back in using lgup.
Is there any way to restore this device? Please help me.
andamiro00 said:
I was cleaning up the carrier file while cleaning up with "adb_appcontrol".
The apk is all backed up.
It is in infinite booting state in the lg logo.
fastboot- ok
QFIL-ok
Download mode-ok
It is possible. a001lg (Japanese version of lg v60) cannot obtain kdz.
That's why you can't put kdz back in using lgup.
Is there any way to restore this device? Please help me.
Click to expand...
Click to collapse
Can you try to factory reset it somehow? A factory reset would restore deleted apps.
If you relock or unlock the bootloader i think that will automatically factory reset.
Airtioteclint said:
Can you try to factory reset it somehow? A factory reset would restore deleted apps.
If you relock or unlock the bootloader i think that will automatically factory reset.
Click to expand...
Click to collapse
I tried to reset the factory, but I only saw the LG logo for 30 minutes. Reset did not proceed and failed.
The bootloader is unlocked. The factory reset has already failed, so I can't try because I think I might fail even if I play.
andamiro00 said:
I tried to reset the factory, but I only saw the LG logo for 30 minutes. Reset did not proceed and failed.
The bootloader is unlocked. The factory reset has already failed, so I can't try because I think I might fail even if I play.
Click to expand...
Click to collapse
Try fastboot erase userdata
If that doesn't work go into download mode and flash your phone's kdz.
Mohsin6643 said:
Try fastboot erase userdata
If that doesn't work go into download mode and flash your phone's kdz.
Click to expand...
Click to collapse
Thank you for your opinion.
Fortunately, I solved it. Recovery a and b were broken and restored to the backup recovery and managed to save it.
andamiro00 said:
Thank you for your opinion.
Fortunately, I solved it. Recovery a and b were broken and restored to the backup recovery and managed to save it.
Click to expand...
Click to collapse
Hi, I have same problem. Can you plz let me know in detail how you restored backup recovery? Thanks
andamiro00 said:
Thank you for your opinion.
Fortunately, I solved it. Recovery a and b were broken and restored to the backup recovery and managed to save it.
Click to expand...
Click to collapse
@andamiro00 Please share method how did you do it? My V60 A001LG is also stucked on LG logo and just download mode is working.
wasim.kokab said:
Hi, I have same problem. Can you plz let me know in detail how you restored backup recovery? Thanks
Click to expand...
Click to collapse
Kamranali6969 said:
@andamiro00 Please share method how did you do it? My V60 A001LG is also stucked on LG logo and just download mode is working.
Click to expand...
Click to collapse
I don't know if this will help.
I remember that it was restored a long time ago and solved by switching to a->b.
I remember switching from partition a to partition b using twrp in xda at that time.
Please refer to the link. One of the ways to switch partitions.
guidecycle.net - guidecycle Resources and Information.
guidecycle.net is your first and best source for all of the information you’re looking for. From general topics to more of what you would expect to find here, guidecycle.net has it all. We hope you find what you are searching for!
guidecycle.net
andamiro00 said:
I don't know if this will help.
I remember that it was restored a long time ago and solved by switching to a->b.
I remember switching from partition a to partition b using twrp in xda at that time.
Please refer to the link. One of the ways to switch partitions.
guidecycle.net - guidecycle Resources and Information.
guidecycle.net is your first and best source for all of the information you’re looking for. From general topics to more of what you would expect to find here, guidecycle.net has it all. We hope you find what you are searching for!
guidecycle.net
Click to expand...
Click to collapse
Thanks but unfortunately m on stock rom non rooted. I need stock kdz to flash as only download mode is accessible.
Waxim1 said:
Thanks but unfortunately m on stock rom non rooted. I need stock kdz to flash as only download mode is accessible.
Click to expand...
Click to collapse
https://forum.xda-developers.com/t/v60-bootloader-unlock-and-magisk-root.4358785/?fr=operanews
If you refer to the article, you can do it up to fastboot. And then refer to the previous article.
Japanese version of sotbank docomo cannot get kdz. I hope the backup partition is alive.
andamiro00 said:
https://forum.xda-developers.com/t/v60-bootloader-unlock-and-magisk-root.4358785/?fr=operanews
If you refer to the article, you can do it up to fastboot. And then refer to the previous article.
Japanese version of sotbank docomo cannot get kdz. I hope the backup partition is alive.
Click to expand...
Click to collapse
Thanks bro i ll give it a try. Can we relock bootloader via same command coz i dnt need root?
Also m wondering why nobody has kdz or tot of Japanese version some developer could hav extracted it. Needed it badly.
Waxim1 said:
Thanks bro i ll give it a try. Can we relock bootloader via same command coz i dnt need root?
Also m wondering why nobody has kdz or tot of Japanese version some developer could hav extracted it. Needed it badly.
Click to expand...
Click to collapse
The Japanese version is managed by softbank docomo, not by LG, so they keep the kdz private.
It will be possible to change the slot without unlocking the bootloader. I wish you success.
andamiro00 said:
https://forum.xda-developers.com/t/v60-bootloader-unlock-and-magisk-root.4358785/?fr=operanews
If you refer to the article, you can do it up to fastboot. And then refer to the previous article.
Japanese version of sotbank docomo cannot get kdz. I hope the backup partition is alive.
Click to expand...
Click to collapse
That has helped, erased user data partition and it is fine now
Here's a full LUNS backup for the Sprint LG G8x with the last update that was pushed OTA.Enjoy!
LG V60 AT&T 30a - Google Drive
drive.google.com
Bro with this I can restore to functional a10 sprint? can this fix the problem of NTcode error?
mclarenf195 said:
Bro with this I can restore to functional a10 sprint? can this fix the problem of NTcode error?
Click to expand...
Click to collapse
Yes,and if I remember correctly that backup is A11.
thanks, I'm going to try, I imagine that it is restored with QFIL, I've tried a thousand things with several KDZ but I can't solve the ntcode error, network and fingerprint sensor error.
mclarenf195 said:
thanks, I'm going to try, I imagine that it is restored with QFIL, I've tried a thousand things with several KDZ but I can't solve the ntcode error, network and fingerprint sensor error.
Click to expand...
Click to collapse
That's stock Sprint.That will fix it all.Just copy the LUNS files in to the Qualcomm folder.
Surgemanxx said:
That's stock Sprint.That will fix it all.Just copy the LUNS files in to the Qualcomm folder.
Click to expand...
Click to collapse
Friend I have a question, should I restore the LUNS files with fh_loader how in the netmsm guide?
[Tutorial] Rescue From HARD BRICK
Don't worry! Everything's gonna be alright ;) You may accidentally erase all partitions and GPT on your phone. Nothing is shown in "Partition Manager". Since there's no Rawprogram XML file we need an alternative method to get the phone back on...
forum.xda-developers.com
I don't delete anything? I leave the partitions how are they? Thanks for the help.
Yes,restore them with fh_loader like netmsm's guide says.No,leave everything as is and just flash away!Make sure you make a back up first just in case anything goes wrong.
Surgemanxx said:
Yes,restore them with fh_loader like netmsm's guide says.No,leave everything as is and just flash away!Make sure you make a back up first just in case anything goes wrong.
Click to expand...
Click to collapse
I can install the backup without problems, I perfectly restore the imei and stop giving the NTCODE error, I also restore the serial as before. Unfortunately, the network error continues, apparently the solution for now is only with box, thank you very much for your help and patience, let me know if you have any news.
mclarenf195 said:
I can install the backup without problems, I perfectly restore the imei and stop giving the NTCODE error, I also restore the serial as before. Unfortunately, the network error continues, apparently the solution for now is only with box, thank you very much for your help and patience, let me know if you have any news.
Click to expand...
Click to collapse
Even with a Medusa box,the G8x as of now can't repair the network permalock issue after IMEI repair.V60 yes from what I was told,but I would still need to see proof of that myself because I sure haven't seen it..lol...But,glad I could help you partially with the backup!
mclarenf195 said:
Friend I have a question, should I restore the LUNS files with fh_loader how in the netmsm guide?
[Tutorial] Rescue From HARD BRICK
Don't worry! Everything's gonna be alright ;) You may accidentally erase all partitions and GPT on your phone. Nothing is shown in "Partition Manager". Since there's no Rawprogram XML file we need an alternative method to get the phone back on...
forum.xda-developers.com
I don't delete anything? I leave the partitions how are they? Thanks for the help.
Click to expand...
Click to collapse
Did you have any luck with restoring? I flash LUNs to my g8x but still have no network (flashed native modem and modemst)
N
St.Noigel said:
Did you have any luck with restoring? I flash LUNs to my g8x but still have no network (flashed native modem and modemst)
Click to expand...
Click to collapse
No luck still with ntcode and network blocked problem
mclarenf195 said:
N
No luck still with ntcode and network blocked problem
Click to expand...
Click to collapse
You'll need your original LUNS 5 backup most definitely for it work.