No data after rom flash - Moto G Power Questions & Answers

I hope someone can help me..
Coming from stock firmware sprint Android 10.
Flashed ROM][CrDroid][11][UNOFFICIAL][RAV*/SOFIA*][7.X
Everything went flawlessly expect when boot I have no data.
Any suggestions please

darko454 said:
I hope someone can help me..
Coming from stock firmware sprint Android 10.
Flashed ROM][CrDroid][11][UNOFFICIAL][RAV*/SOFIA*][7.X
Everything went flawlessly expect when boot I have no data.
Any suggestions please
Click to expand...
Click to collapse
Make sure the correct APN is selected. If yes, look at the values inside of APN and then verify that they are correct. Google Sprint APN settings.

tcaudill01 said:
Make sure the correct APN is selected. If yes, look at the values inside of APN and then verify that they are correct. Google Sprint APN settings.
Click to expand...
Click to collapse
If you are referring to carrier settings under network and internet nothing happens when try to click

darko454 said:
If you are referring to carrier settings under network and internet nothing happens when try to click
Click to expand...
Click to collapse
Under "Network and Internet", select "Mobile Network", scroll to the bottom and select "Access Point Names". From there you should be able to see what carrier APN you have selected. If there is none, try pressing the "+" and add your own.

darko454 said:
If you are referring to carrier settings under network and internet nothing happens when try to click nothing
Click to expand...
Click to collapse
tcaudill01 said:
Under "Network and Internet", select "Mobile Network", scroll to the bottom and select "Access Point Names". From there you should be able to see what carrier APN you have selected. If there is none, try pressing the "+" and add your own.
Click to expand...
Click to collapse
thanks for the quick reply but when I click carrier settings nothing opens
I might reflash without sim card

No APN settings is why you have no data. I would try a reflash.

darko454 said:
thanks for the quick reply but when I click carrier settings nothing opens
Click to expand...
Click to collapse
darko454 said:
thanks for the quick reply but when I click carrier settings nothing opens
I might reflash without sim card
Click to expand...
Click to collapse
Ok so I re flashed with out sim,tried to install sim after boot, same result

darko454 said:
Ok so I re flashed with out sim,tried to install sim after boot, same result
Click to expand...
Click to collapse
For ****s and giggles, I would try another ROM. Better yet, I would restore back to stock and then try another install. That takes more time but will help ensure that you are starting from the most stable platform. If you go this route, remember to not restore stock 11, it will bootloop if you try to install a ton over it.

tcaudill01 said:
For ****s and giggles, I would try another ROM. Better yet, I would restore back to stock and then try another install. That takes more time but will help ensure that you are starting from the most stable platform. If you go this route, remember to not restore stock 11, it will bootloop if you try to install a ton over it.
Click to expand...
Click to collapse
I haven't flash gapps yet
Could it be that I haven't installed gapps
Not sure how to restore stock Android 10
Thanks

darko454 said:
I haven't flash gapps yet
Could it be that I haven't installed gapps
Not sure how to restore stock Android 10
Thanks
Click to expand...
Click to collapse
Nothing to do with Gapps, this is a radio issue. Something didn't install correctly.
Here is a great guide to make sure you get Android 10 and not 11; https://forum.xda-developers.com/t/how-to-downgrade-android-11-to-10.4283809/

tcaudill01 said:
Nothing to do with Gapps, this is a radio issue. Something didn't install correctly.
Here is a great guide to make sure you get Android 10 and not 11; https://forum.xda-developers.com/t/how-to-downgrade-android-11-to-10.4283809/
Click to expand...
Click to collapse
ok I compared the highlighted firmware from lolinet.com and the actual LMSA firmware (downloaded automatically) they look the same, also I see Fastboot_Mot_V1 not sure what's that for
my question is should I flash the LMSA firmware (downloaded automatically) with Fastboot_Mot_V1 or should I replace it with lolinets firmware? Just making sure

darko454 said:
ok I compared the highlighted firmware from lolinet.com and the actual LMSA firmware (downloaded automatically) they look the same, also I see Fastboot_Mot_V1 not sure what's that for
my question is should I flash the LMSA firmware (downloaded automatically) with Fastboot_Mot_V1 or should I replace it with lolinets firmware? Just making sure
Click to expand...
Click to collapse
Please READ all the steps in this guide before starting and follow their process.
How to downgrade Android 11 to 10
I unfortunately decided to upgrade my Moto G Power 2020 to Android 11 when the update was available and have had many issues most of which is that it is now very slow and battery drain is much higher. Have tried the many suggestions online to...
forum.xda-developers.com

tcaudill01 said:
Please READ all the steps in this guide before starting and follow their process.
How to downgrade Android 11 to 10
I unfortunately decided to upgrade my Moto G Power 2020 to Android 11 when the update was available and have had many issues most of which is that it is now very slow and battery drain is much higher. Have tried the many suggestions online to...
forum.xda-developers.com
Click to expand...
Click to collapse
thanks
I just reflashed stock firmware, rooted stock, backed up apn config.xml file.
Flashed [ROM][CrDroid][11][UNOFFICIAL][RAV*/SOFIA*][7.X]
Replaced apn config.xml file. system/product/ect.
still no lte
Tried same process but with [ROM][RAV*/SOFIA*][10][UNOFFICIAL] LineageOS 17.1
same no Lte

darko454 said:
thanks
I just reflashed stock firmware, rooted stock, backed up apn config.xml file.
Flashed [ROM][CrDroid][11][UNOFFICIAL][RAV*/SOFIA*][7.X]
Replaced apn config.xml file. system/product/ect.
still no lte
Tried same process but with [ROM][RAV*/SOFIA*][10][UNOFFICIAL] LineageOS 17.1
same no Lte
Click to expand...
Click to collapse
Does LTE show on stock? From Lineage or CrDroid were you able to find where you add or change the son? From either one, have you tried *#*#4636#*#* from the dial pad? You can change a lot of network specific things from there. You could try changing different band combinations to see if you can get a connection. You can also see what towers you are connecting to.

darko454 said:
thanks
I just reflashed stock firmware, rooted stock, backed up apn config.xml file.
Flashed [ROM][CrDroid][11][UNOFFICIAL][RAV*/SOFIA*][7.X]
Replaced apn config.xml file. system/product/ect.
still no lte
Tried same process but with [ROM][RAV*/SOFIA*][10][UNOFFICIAL] LineageOS 17.1
same no Lte
Click to expand...
Click to collapse
Did some searching and looks like other Sprint users had the same issue.
Search results for query: Sprint
forum.xda-developers.com

tcaudill01 said:
Did some searching and looks like other Sprint users had the same issue.
Search results for query: Sprint
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks for the Info
Is there any way developers can help us?

darko454 said:
Thanks for the Info
Is there any way developers can help us
Click to expand...
Click to collapse
darko454 said:
hey is it possible to use another firmware from a similar device like moto stylus?
Click to expand...
Click to collapse

Any info please

tcaudill01 said:
Nothing to do with Gapps, this is a radio issue. Something didn't install correctly.
Here is a great guide to make sure you get Android 10 and not 11; https://forum.xda-developers.com/t/how-to-downgrade-android-11-to-10.4283809
Click to expand...
Click to collapse
is there any way to make a backup from the stock rom radio ,then flash it to custom rom ??
thanks

Related

CM10 MMS (fix no worky)

I just flashed cm-10.1.1-mdm02 onto my phone and I am having the "can't send MMS" issue. I would love to follow the fix supplied in the CyanogenMod 10.1 Official Releases thread, but I do not have the "CDMA subscription" or anything that even says "LTE" in the "preferred network mode. See Attachements Below.
Is this something that has been seen?
... And yes, I went a little overoard with my use of quotes
evolwun said:
I just flashed cm-10.1.1-mdm02 onto my phone and I am having the "can't send MMS" issue. I would love to follow the fix supplied in the CyanogenMod 10.1 Official Releases thread, but I do not have the "CDMA subscription" or anything that even says "LTE" in the "preferred network mode. See Attachements Below.
Is this something that has been seen?
... And yes, I went a little overoard with my use of quotes
Click to expand...
Click to collapse
That does not look like mdm02 (or any of my releases actually). If you came from another cm-based ROM, you may need to wipe /system before flashing. It should look like the attached picture.
mdmower said:
That does not look like mdm02 (or any of my releases actually). If you came from another cm-based ROM, you may need to wipe /system before flashing. It should look like the attached picture.
Click to expand...
Click to collapse
Nope, I have ONLY been using your CM roms since you came out with them. I have jumped around releases quite a bit though.
here is a screenshot of the build info
evolwun said:
here is a screenshot of the build info
Click to expand...
Click to collapse
kernel 3.0.71 tells me you haven't updated the kernel since the end of March. Extract boot.img from the cm zip and flash it:
Code:
fastboot flash boot boot.img
If you're running any modifications to cyanogenmod, they can also mess with the displayed settings. If you have any applications installed that supposedly give you more network options, uninstall them.
mdmower said:
kernel 3.0.71 tells me you haven't updated the kernel since the end of March. Extract boot.img from the cm zip and flash it:
Code:
fastboot flash boot boot.img
If you're running any modifications to cyanogenmod, they can also mess with the displayed settings. If you have any applications installed that supposedly give you more network options, uninstall them.
Click to expand...
Click to collapse
I just downloaded the mdm03 rom and flashed it as well as the boot.img from that .zip... no change. Am I looking a full wipe on this one?
BTW, thanks for the help on this.
evolwun said:
I just downloaded the mdm03 rom and flashed it as well as the boot.img from that .zip... no change. Am I looking a full wipe on this one?
BTW, thanks for the help on this.
Click to expand...
Click to collapse
Try this: in recovery...
make a full backup
wipe only /system
install build mdm03
install gapps
mdmower said:
Try this: in recovery...
make a full backup
wipe only /system
install build mdm03
install gapps
Click to expand...
Click to collapse
Still nothing, I thought that sounded like a great suggestion.
evolwun said:
Still nothing, I thought that sounded like a great suggestion.
Click to expand...
Click to collapse
Since you have a full backup, the next check would be to wipe /data, /cache, and /system, then install CM and see if the menu options appear like in my screenshot.
mdmower said:
Since you have a full backup, the next check would be to wipe /data, /cache, and /system, then install CM and see if the menu options appear like in my screenshot.
Click to expand...
Click to collapse
Will do, I'll do it tomorrow during the day and post up the results.
are you s-on with a locked bootloader?
I did a full wipe and everything is working fine. I love the fact that I can restore app data from titanium backup. I need to be more careful about keeping my boot.img up to date.
Messaging no worky MD04
evolwun said:
I did a full wipe and everything is working fine. I love the fact that I can restore app data from titanium backup. I need to be more careful about keeping my boot.img up to date.
Click to expand...
Click to collapse
I cannot send SMS or MMS messages...
Following instructions in this thread I did a TWRP Recovery/factory reset, flashed and reinstalled md04, it was working for awhile.
Proceeded to install my apps, somewhere along the way SMS died.
Also I now see as one other in this thread; under Settings/More/Mobile Networks - Preferred Network mode is LTE / WCDMA, if that is selected there are no options displayed that include "LTE"
LeonMBarnes said:
I cannot send SMS or MMS messages...
Following instructions in this thread I did a TWRP Recovery/factory reset, flashed and reinstalled md04, it was working for awhile.
Proceeded to install my apps, somewhere along the way SMS died.
Also I now see as one other in this thread; under Settings/More/Mobile Networks - Preferred Network mode is LTE / WCDMA, if that is selected there are no options displayed that include "LTE"
Click to expand...
Click to collapse
Can you connect to the network? If so, is your CDMA subscription set to RUIM/SIM?
--
also check Radio Information.
1. Go to dialer and enter: *#*#4636#*#*
2. Phone Information
3. Let preferred network type:
4. LTE/CDMA (PRL) (if not set to this, set it to this)
vazersecurity said:
Can you connect to the network? If so, is your CDMA subscription set to RUIM/SIM?
--
also check Radio Information.
1. Go to dialer and enter: *#*#4636#*#*
2. Phone Information
3. Let preferred network type:
4. LTE/CDMA (PRL) (if not set to this, set it to this)
Click to expand...
Click to collapse
I think this is solved.
Trying different things, found that when the system has a fresh MD04, go to Settings/More/Mobile Networks/Network Mode - changed to "LTE/CDMA/EvDo". Since then it is behaving and SMS is working, Also I checked the Radio info per instructions above, it shows "LTE/CDMA auto (PRL)".
All is good for now. :fingers-crossed:
Thanks again.

Went back to stock using TOT method, now i can't get 4G/LTE

Hi guys,
I flashed Resurrection Remix and it wouldn't start on the first boot. Restored nandroid and got stuck in bootloop, so I went back to stock using the TOT method (ZV4 then let OTA updates get me to ZVC), and I noticed that on my lock screen, it said LG instead of Sprint, and I noticed I had no data. So I tried the 3 dialer codes: ##UPDATE#, ##SCRTN#, and ##RTN#. After this I can now get 3G and it says Sprint on my lockscreen, but no 4g, In settings/mobile networks/network mode LTE/CDMA is selected. In settings/about phone/network, the mobile network type is either EvDo-rev.A or eHRPD(it goes back and forth). I'm wondering if its an APN setting but I can't find anything on this. Any ideas on how I can get 4G back? Thanks for any ideas.
Did you try a profile update? try running 2 of them, then a PRL update, than another profile update. It's pretty picky. [I mean though the System Update tab]
Warboy said:
Did you try a profile update? try running 2 of them, then a PRL update, than another profile update. It's pretty picky. [I mean though the System Update tab]
Click to expand...
Click to collapse
Tried your suggestion but no change, The first profile update took about a minute, and the others went really quick. Still no LTE.
curtvan said:
Tried your suggestion but no change, The first profile update took about a minute, and the others went really quick. Still no LTE.
Click to expand...
Click to collapse
Hmm, Try a reboot and a PRL update than a Profile Update?
curtvan said:
Hi guys,
I flashed Resurrection Remix and it wouldn't start on the first boot. Restored nandroid and got stuck in bootloop, so I went back to stock using the TOT method (ZV4 then let OTA updates get me to ZVC), and I noticed that on my lock screen, it said LG instead of Sprint, and I noticed I had no data. So I tried the 3 dialer codes: ##UPDATE#, ##SCRTN#, and ##RTN#. After this I can now get 3G and it says Sprint on my lockscreen, but no 4g, In settings/mobile networks/network mode LTE/CDMA is selected. In settings/about phone/network, the mobile network type is either EvDo-rev.A or eHRPD(it goes back and forth). I'm wondering if its an APN setting but I can't find anything on this. Any ideas on how I can get 4G back? Thanks for any ideas.
Click to expand...
Click to collapse
what copy of Resurrection Remix you flash?
Warboy said:
Hmm, Try a reboot and a PRL update than a Profile Update?
Click to expand...
Click to collapse
Just tried that, no change.
imerza82 said:
what copy of Resurrection Remix you flash?
Click to expand...
Click to collapse
It was Resurrection Remix 6.0.1 Marshmallow, but it was about a week ago so I'm not sure what version it was, I see it was updated 1/30.
I notice that it has a refresh animation by the signal meter now too. http://i.imgur.com/NqnUNPt.png Thats what made me think it was an APN setting. It does the refresh for about 30 seconds before it can find a signal.
[/COLOR]
curtvan said:
I notice that it has a refresh animation by the signal meter now too. http://i.imgur.com/NqnUNPt.png Thats what made me think it was an APN setting. It does the refresh for about 30 seconds before it can find a signal.
Click to expand...
Click to collapse
Better tot flash again/flash the correct stock/root/recovery/then flash http://www.oadam11.com/LG_G3/ls990/RR/ResurrectionRemix-M-v5.6.2-20160130-ls990.zip
With update gapps. http://download.dirtyunicorns.com/f...s/BaNkS_Dynamic_GApps_6.x.x_1-26-16_15:04.zip
it will be solved
imerza82 said:
[/COLOR]
Better tot flash again/flash the correct stock/root/recovery/then flash http://www.oadam11.com/LG_G3/ls990/RR/ResurrectionRemix-M-v5.6.2-20160130-ls990.zip
With update gapps. http://download.dirtyunicorns.com/f...s/BaNkS_Dynamic_GApps_6.x.x_1-26-16_15:04.zip
it will be solved
Click to expand...
Click to collapse
Maybe I will try that this weekend. I'm trying to get it back to stock so I can sell it.
imerza82 said:
[/COLOR]
Better tot flash again/flash the correct stock/root/recovery/then flash http://www.oadam11.com/LG_G3/ls990/RR/ResurrectionRemix-M-v5.6.2-20160130-ls990.zip
With update gapps. http://download.dirtyunicorns.com/f...s/BaNkS_Dynamic_GApps_6.x.x_1-26-16_15:04.zip
it will be solved
Click to expand...
Click to collapse
Still no luck. Everything working good with Resurrection Remix except data is 3G and not LTE. I also tried flashing some different modems but that didn't change anything. I am thinking there is a partition that doesn't get wiped out during a TOT flash and something is wrong in that area. I am going to try to mess with APN settings when I get time.
curtvan said:
Still no luck. Everything working good with Resurrection Remix except data is 3G and not LTE. I also tried flashing some different modems but that didn't change anything. I am thinking there is a partition that doesn't get wiped out during a TOT flash and something is wrong in that area. I am going to try to mess with APN settings when I get time.
Click to expand...
Click to collapse
This may sound like a stupid question but, do you have a SIM card in?
cipollone88 said:
This may sound like a stupid question but, do you have a SIM card in?
Click to expand...
Click to collapse
Yes SIM card is in. I went back to stock everything again and the 4G problem remains.
curtvan said:
Yes SIM card is in. I went back to stock everything again and the 4G problem remains.
Click to expand...
Click to collapse
Using the ##RTN# dailer code and entering my MSL/SPC code has always got back to a fully functioning stock bloated device when needed. Best of luck to ya!

Boost APN

Ok guys, im trying to get a custom rom on my s5, if i get a rom installed, I have no network. I tried manually put in data for Boost APN. Tell it to save and it doesnt. What am I doing wrong here?
hatchetwarrior92882 said:
Ok guys, im trying to get a custom rom on my s5, if i get a rom installed, I have no network. I tried manually put in data for Boost APN. Tell it to save and it doesnt. What am I doing wrong here?
Click to expand...
Click to collapse
Are you using Lineage or Lineage based OS?
Do you see your IMEI when going into about phone and signal status?
Fear_The_Fluff said:
Are you using Lineage or Lineage based OS?
Do you see your IMEI when going into about phone and signal status?
Click to expand...
Click to collapse
Yes, I can see all the information. Just no data.
hatchetwarrior92882 said:
Ok guys, im trying to get a custom rom on my s5, if i get a rom installed, I have no network. I tried manually put in data for Boost APN. Tell it to save and it doesnt. What am I doing wrong here?
Click to expand...
Click to collapse
I'm having this same issue and it's getting really frustrating to figure out. Only rom data works on for me is stock and I don't wanna be on it. If I find any solution I'll let you know, but for now I'm right there with you with this issue.
hatchetwarrior92882 said:
Ok guys, im trying to get a custom rom on my s5, if i get a rom installed, I have no network. I tried manually put in data for Boost APN. Tell it to save and it doesnt. What am I doing wrong here?
Click to expand...
Click to collapse
I managed to get at least 3G working, and it's on DotOS 3.0. I flashed This APN zip right after flashing the rom, and afterwards I went into Settings -> Network & Internet -> Mobile Network, I turned off Automatically select network and then picked Sprint to register it on the network. Haven't been able to get 4G working but personally I don't mind, 3G's good enough for me.
Try to flash this APN through recovery it works for me on virgin mobile....I also got MMS working with it

ANE-AL00 no 3G/4G in US

Hi,
I'm using GSI-treble CAOS 11. I recently moved to the US and I don't seem to get 3G/4G in the US. 3G/4G worked when tried on another phone with the same sim.
I'm using a ANE-AL00. Is it a baseband issue? Any thoughts?
And I'm getting connected to 2.4Ghz wifi only, not sure if it's a bug.
Thanks
balamu96m said:
Is it a baseband issue?
Click to expand...
Click to collapse
Hello, it's very likely...
Look here
-Alf- said:
Hello, it's very likely...
Look here
Click to expand...
Click to collapse
I checked for the phone for which data is working and it also has similar support levels for the bands.
I'm trying flash stock ROM to see if it helps.
Thanks
balamu96m said:
I'm trying flash stock ROM to see if
Click to expand...
Click to collapse
Try eRecovery, using option "Download latest version and recovery".
https://forum.xda-developers.com/t/...ndroid-11-stable-so-far.4222155/post-84460297
The second method is flashing Service ROM aka fullStock ROM via dload method, but this process will erase all your data and lock bootloader again.
-Alf- said:
Try eRecovery, using option "Download latest version and recovery".
https://forum.xda-developers.com/t/...ndroid-11-stable-so-far.4222155/post-84460297
The second method is flashing Service ROM aka fullStock ROM via dload method, but this process will erase all your data and lock bootloader again.
Click to expand...
Click to collapse
I tried the eRecovery auto update but it always fails to get update details for me after connecting to WiFi.
With the load method, although the bootloader gets locked, I can unlock using the same unlock code right?
balamu96m said:
the same unlock code right?
Click to expand...
Click to collapse
Right, each bootloader code is permanent, it wont expire.
What is your model and build number? (for example, 9.1.0.257(C432E6R1P7) )
-Alf- said:
Right, each bootloader code is permanent, it wont expire.
What is your model and build number? (for example, 9.1.0.257(C432E6R1P7) )
Click to expand...
Click to collapse
Mine is 9.1.0.314(C675E9R1P3)
Will flashing a different modem.img work?
balamu96m said:
Will flashing a different modem.img work?
Click to expand...
Click to collapse
I don't know, I've never tried it .
Maybe this will help you:
https://forum.xda-developers.com/t/full-network-mode-preferences-on-gsi.4342225/
Or try this solution:
In SetEdit app:
1. + 'Add new setting' at the top.
2. Key in:
hw_add_4g_only
3.Tap Save.
4. In 'Edit setting', enter your mobile country code , can be found in your current APN Accses Point -> MCC . (or look for your mobile country code here )
5. Tap Save changes, close app and restart your phone.
-Alf- said:
I don't know, I've never tried it .
Maybe this will help you:
https://forum.xda-developers.com/t/full-network-mode-preferences-on-gsi.4342225/
Or try this solution:
In SetEdit app:
1. + 'Add new setting' at the top.
2. Key in:
hw_add_4g_only
3.Tap Save.
4. In 'Edit setting', enter your mobile country code , can be found in your current APN Accses Point -> MCC . (or look for your mobile country code here )
5. Tap Save changes, close app and restart your phone.
Click to expand...
Click to collapse
Thanks! I'll look into it. But I flashed stock EMUI9.1 and still, the network works only on EDGE. So, I guess it has something with hardware/firmware. I don't know the difference between LX1 and ANE-AL00 in terms of hw...wondering if I should try LX1/LX2 stock rom..
balamu96m said:
wondering if I should try LX1/LX2 stock rom..
Click to expand...
Click to collapse
I would not recommend ...
You can install only firmware for your regional variant - Al00 (C675), for example this one .
(Cxxx) is very important in determining the correct firmware to download.
-Alf- said:
I would not recommend ...
You can install only firmware for your regional variant - Al00 (C675), for example this one .
(Cxxx) is very important in determining the correct firmware to download.
Click to expand...
Click to collapse
JFYI - https://forum.xda-developers.com/t/changing-lte-bands.3769176/
-Alf- said:
JFYI - https://forum.xda-developers.com/t/changing-lte-bands.3769176/
Click to expand...
Click to collapse
Thanks again!
So, based on that, I flashed LX3 oeminfo and LX3 stock from. My phone is now rebranded to LX3 but still, I'm getting only EDGE! Probably that's all I can do I guess. I'll check with the operator once but then I don't have much hope too!
Anyway it was an interesting exercise (also consumed a lot of time)
Cheers!

Is there a way to activate the LG v60 hidden menu?

First of all, I am writing it using a translator because I can't speak English. Please understand even if the writing is awkward.
My device is the Japanese version of lg v60 (a001lg). There is no field test menu in the hidden menu of the Japanese version device. I opened the bootloader.
Is there a way to activate the blocked hidden menu? I'm trying to activate the volte. To do so, I'm going to activate ims setting.
The method I've tried so far.
I tried cross-flash with tmobile kdz. However, cross-flashing failed due to different partition structures.
"operatorlogging" "eri" "carrier" "persdata" "OP_a" "OP_b" There's no partition.
I tried to activate the volte provided. I failed.
It seems certain that the file inside the device is in the hidden menu.
Please advise on how to activate the cross-flashing or hidden menu.
andamiro00 said:
First of all, I am writing it using a translator because I can't speak English. Please understand even if the writing is awkward.
My device is the Japanese version of lg v60 (a001lg). There is no field test menu in the hidden menu of the Japanese version device. I opened the bootloader.
Is there a way to activate the blocked hidden menu? I'm trying to activate the volte. To do so, I'm going to activate ims setting.
The method I've tried so far.
I tried cross-flash with tmobile kdz. However, cross-flashing failed due to different partition structures.
"operatorlogging" "eri" "carrier" "persdata" "OP_a" "OP_b" There's no partition.
I tried to activate the volte provided. I failed.
It seems certain that the file inside the device is in the hidden menu.
Please advise on how to activate the cross-flashing or hidden menu.
Click to expand...
Click to collapse
Try to install this app
openbox909 said:
Try to install this app
Click to expand...
Click to collapse
Thank you for your answer.
The app will not be installed.
Dial *#546368#*600#
Field test
Edit - oh I just read your original post again. You don't have field test. Maybe you can try using different APN settings.
Airtioteclint said:
*#546368#*600#을 누르십시오.
현장시험
편집 - oh 나는 방금 너의 원래 글을 다시 읽었어. 현장검증도 안 하고. 다른 APN 설정을 사용해 보십시오.
Click to expand...
Click to collapse
대답해줘서 고마워.
현재 한국에서 사용되고 있으며 다른 apn으로 변경하려고 했지만 볼트를 사용할 수 없었다.
나는 이 문제로 소프트뱅크에 연락했다.
소프트뱅크는 자사 회사인 유심만 볼트를 사용할 수 있다고 밝혔다.
숨겨진 메뉴를 열어야 할 것 같은데 슈퍼 유저로서도 어떻게 풀어야 할지 모르겠다.
Hello. Have you upgraded it to android 11?
And could you dump to help me, i finding it!
kim12355 said:
Hello. Have you upgraded it to android 11?
And could you dump to help me, i finding it!
Click to expand...
Click to collapse
Yes, it's Android 11.
How can I help you?
andamiro00 said:
Yes, it's Android 11.
How can I help you?
Click to expand...
Click to collapse
I need a001lg android 11 modem ab, also ftm if you accept
Could you dump it and send it to me?
kim12355 said:
I need a001lg android 11 modem ab, also ftm if you accept
Could you dump it and send it to me?
Click to expand...
Click to collapse
Modems a and b can be sent.
Can you tell me why FTM is needed?
And do you mean you need a dump file with LG up?
I'm watching it through a translator. It's translated weirdly. Are you saying you need a dump file, too?
andamiro00 said:
Modems a and b can be sent.
Can you tell me why FTM is needed?
And do you mean you need a dump file with LG up?
I'm watching it through a translator. It's translated weirdly. Are you saying you need a dump file, too?
Click to expand...
Click to collapse
You can follow these steps in bootloader unlock instruction and just open partition manager in qfil. Then you can see all partitions in your v60 (some are hidden). Find modem a and modem b, right click on it select first row and click read to dump it
kim12355 said:
You can follow these steps in bootloader unlock instruction and just open partition manager in qfil. Then you can see all partitions in your v60 (some are hidden). Find modem a and modem b, right click on it select first row and click read to dump it
Click to expand...
Click to collapse
I uploaded a modem file.
Check it out.
I hope the modem is activated.
I don't think I can upload it on xda because the modem is big. Is there any way to send it to an email or somewhere else?
andamiro00 said:
I uploaded a modem file.
Check it out.
I hope the modem is activated.
I don't think I can upload it on xda because the modem is big. Is there any way to send it to an email or somewhere else?
Click to expand...
Click to collapse
Yes it more than 300mb i remember
You can upload to google drive?
kim12355 said:
Yes it more than 300mb i remember
You can upload to google drive?
Click to expand...
Click to collapse
https://drive.google.com/file/d/1doaPOGk38hx40kw6Qse50FZvQzQGwWvR/view?usp=sharing,
modem_a_oragin.bin
drive.google.com
Download it.
andamiro00 said:
Modems a and b can be sent.
Can you tell me why FTM is needed?
And do you mean you need a dump file with LG up?
I'm watching it through a translator. It's translated weirdly. Are you saying you need a dump file, too?
Click to expand...
Click to collapse
I need ftm because somehow i bought. My ftm not original
But it still work normally but i lost combo hard button to enter factory data reset. That why i ask it
kim12355 said:
I need ftm because somehow i bought. My ftm not original
But it still work normally but i lost combo hard button to enter factory data reset. That why i ask it
Click to expand...
Click to collapse
Please leave a comment when you have received the modem file.
FTM files are difficult to share.
However, if you need anything, I can let you know if you call the hexa code offset number.
andamiro00 said:
Please leave a comment when you have received the modem file.
FTM files are difficult to share.
However, if you need anything, I can let you know if you call the hexa code offset number.
Click to expand...
Click to collapse
thank you!!!! first i flashed it on android 10 base and i have signal. it is a nice ensign that it will make fingerprint work on android 11
my v60 it already crossflashed by somehow before i bought it. it have impl 0 and i can crossflash any version but signal only work with original modem.
about i just wanna edit imei and sn then restore in my v60. it not important with me because my v60 it just lost hard combo button enter factory data reset
thank you again <3. im upgrading to android 11, and see will fingerprint work!!
kim12355 said:
thank you!!!! first i flashed it on android 10 base and i have signal. it is a nice ensign that it will make fingerprint work on android 11
my v60 it already crossflashed by somehow before i bought it. it have impl 0 and i can crossflash any version but signal only work with original modem.
about i just wanna edit imei and sn then restore in my v60. it not important with me because my v60 it just lost hard combo button enter factory data reset
thank you again <3. im upgrading to android 11, and see will fingerprint work!!
Click to expand...
Click to collapse
If possible, could you tell me how you cross-flash? I also cross-flash on t-mobile, but failed. There was an error like the picture.
andamiro00 said:
If possible, could you tell me how you cross-flash? I also cross-flash on t-mobile, but failed. There was an error like the picture.
Click to expand...
Click to collapse
like i said that it crossflashed before i bought it so i dont know how.
but i think medusa pro box can do it. and also make a full dump of your device.
maybe leronex on discord can help you
pm me in telegram (Mama Tao)
kim12355 said:
like i said that it crossflashed before i bought it so i dont know how.
but i think medusa pro box can do it. and also make a full dump of your device.
maybe leronex on discord can help you
pm me in telegram (Mama Tao)
Click to expand...
Click to collapse
Congratulations on your successful communication.
There was hope, but it disappeared again. The information is appreciated.
andamiro00 said:
Congratulations on your successful communication.
There was hope, but it disappeared again. The information is appreciated.
Click to expand...
Click to collapse
It so much risks to do it. Because we dont have any experience about it (that why you need to make full dumps, i mean full backup partitions). But your v60 still have L1 winevine right?
After do that and successful your impl will return zero and winevine will be changed to L3

Categories

Resources