im on PIE V300L30p, following the first steps here - https://forum.xda-developers.com/t/korean-variant-bootloader-unlock-and-root.3804505/#post-76823774, on LGUP i'm flashing H93020d_00_OPEN_EU_OP_0326.kdz and at 32% i got rx timeout 1.5 in partition dl, i rebooted my phone and got bootloop. i can boot to download mode but my pc can't detect, it showing:
Now waiting for any connection...
unknown B89
unknown / E / L / R0.
Related
hi! I'm newbie here. so I have a question for you, I have LG L70 D325 with stock ROM, and I wanna try to Install Custom ROM from here. I did exactly step by step. here's the list of what I did so my phone suddenly bricked
1. Unlocking Bootloader taken from here (Success)
2. Installing SuperSU, BusyBox Installer
3. Downloading the CM12 from here
4. boot to recovery mode to install the Custom ROM. first I do wipe data, then install the ROM. when Installing, there are no error code or notifications so I assumed it's installed. I try to install the Gapps, but failed, so I skipped it. when I reboot my phone, suddenly I got messages on the left top of screen says :
Code:
[840] fastboot_init()
[840] Error: allocating memory for ssd buffer
[860] USB init ept @ 0x7ad0000
[860] udc_start()
and that's all I got. no bootscreen, can't entering the Recovery Mode, on download mode (while connected to PC, it says :
Code:
------------------------------------------------
DOWNLOAD MODE
------------------------------------------------
Loading ......
Press the Volume Up key until you see the download screen
[530] fastboot_init()
[530] Error: allocating memory for ssd buffer
[550] USB init ept @ 0x7ad0000
[570] udc_start()
[680] -- reset --
[680] -- portchange --
[720] -- reset --
[720] --portchange --
I've tried so many ways to restore it. from Laf Multi Tools, using fastboot device (my device won't detect in PC, even in my friend's laptop), etc and still no luck. can someone please help me?
unbrick LG L70
install LG L70 USB driver, and update tool from official LG website.
lg.com/in/support/software-manuals
1.Install the USB DRIVER
2.Install and Execute the LG MOBILE SUPPORT TOOL
3.Connect your phone to PC by using the USB Cable
4.Click “Start Updating” n the LG Mobile Support Tool to begin.
If your phone needs to upgrade, the “Start Updating “ button will be enable.
if your phone is not detect. switch off device,then wait for 10 sec. then press vol + button while plug in usb to phone. it will show a firmware update window. u needed to wait for finish download a file about 930 mb from LG. it will work 100%.hope i can help u.thanks u
#jishnuks007
Not recognizing device
What if it doesn't recognize the device anymore? I don't think it's a USB issue since I installed and reinstalled the correct version multiple times. Perhaps it's a Windows 10 issues? Any other way to fix it?
hello,
part 1
I will start by that the LG G3 I got from a neighbor and she did not exactly know what her boys do to the device :angel:
I do not know if the device was in debugging mode and ROOT so I will describe the current situation:
1 If you turn on the device is stuck the logo of LG
2 he can get into a normal recovery, but after I perform Clear / Reset is back to being stuck in the logo.
3- When I try to enter download mode he entered to fastboot mode Started and wait for fastboot Processsing command.
4- My computer installed SRKtool_2.1 droidth and SRKtool_1.0.5_droidth, as well as SDK is updated.
5- I tried to make various adjustments through SRKtool and via fastboot command, the file (*.bin\*.img) send to the device from the PC but faild to write them, and I get messages:
sending laf "okay"
writing laf "failed (remote: flash write failure)
all file have the same masssage.
I try to perform repair to:
A- fastboot mode Started
B- recovery mode
from srktools and I got the same write fail massage !
He's trying to re-write the BIN files taking off from the original rom,
again he can transfer files but does not actually write the on the device,
then the device restarts and then he stuck the logo of TWRP, the expense of battery re-enters the regular recovery mode.
part 2 Updated!
From time to time the device did not enter the FASTBOOT MODE and gets to the firmware update, I install a new ROM, but !!!
the operating system install LGE Android MTP Device driver,
when I flash the rom he stack on 3% and the hardware driver turn to yellow with code 10 (device not work properly).
does LGE Android MTP Device have to be install to do the FLASH ???
the MPT can be damage and that cause the problem ?
the same problem on 2 different PC & OS (xp/7/10) with different drivers for MPT,
after you restart the mobile it returns to FASTBOOT MODE
Hi there,
My moto e 2nd gen got stuck in bootloader and won't boot.
The monitor displays as below:
**********************************************
Start Up Failed:
Your device didn't start up successfully.
Use the Software Repair Assistant on computer to repair your device.
Connect your device to your computer to get the Software Repair Assistant.
AP Fastboot Flash Mode (Secure)
hab check failed for boot
Failed to verify hab image boot
failed to validate boot image
EROOR: Failed to pass validation, backup fastboot
Fastboot Reason: Fall-through from normal boot mode
BL:
Baseband: M8916_2020629.41.03.21.51R SURNIA_RECTA_CUS
Product/Variant: surnia XT1527 8GB P3
Serial Number:
CPU:
eMMC:
DRAM
Console [NULL]: null
Battery OK
Device is LOCKED. Status Code: 0
Software status: Official
Connect USB Data cable
**************************************************
In the Recovery Mode display, I see "qe 0/0" which I learned from the other thread that it means the device has never been rooted.
Below is how this happened;
I used the app called KingRoot.
But the app says failed to root the device.
My phone acted weird so I uninstalled KingRoot.
Then I tried to remove the .exe file of KingRoot but failed somehow.
Right after I just turned on some secure feature (which warns the user that the app may be harmful?) of the device, the device went black and displayed the bootloader screen.
Below is what I have done so far:
Wipe cache partition (successful), then Reboot the system (Failed)
Wipe data/factory reset (successful), then Reboot the system(Failed)
Apply update from ADB with the stock Rom I found in the [http://firmware.center/firmware/Moto...Stock/XT1527/] but received error as below,
***********************************************
Finding update package...
Opening update package...
Verifying update package...
E:footer is wrong.
E:signature verification failed.
Installation failed.
************************************************
Then, I flashed three image files (recovery, boot, bootloader) using fastboot command (without unlocking bootloader).
I did not use the bootloader unlocking command.
So I thought the flashing would failed but somehow succeeded only with recovery.imag.
I believe my device has never been rooted and the bootloader has never been unlocked.
Is it possible that KingRoot has modified some system files even when the device has never been rooted and the bootloader has never been unlocked?
And how can I fix my bricked moto e?
Could someone help me out on this please? :crying:
quicksand99999 said:
:
Click to expand...
Click to collapse
Are you following the steps as mentioned in this thread ?
Also you are getting signature failed error. In such cases, download the firmware again and check
Hi there,
Thank you for the reply. Sorry that it took so long to reply back.
I did what the above mentioned guideline tells for the first time.
And after I tried second time, finally my phone started working again!!
The first time with an older version stock firms, some file failed to be flashed.
So I used seemingly-newer-version-than-my-original-firmware the second time.
Even though "mfastboot flash system system.img_sparsechunk.5" was missing from the stock firmware, my phone was able to recover to the normal state.
THANK YOU SO MUCH!!!
I went to some shops that claim they can fix bricked phones but all of them said that motorola phones are difficult to fix. But I could fix it after second trial.
Developer Forum >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Shops
moto e xt1521 bootloader unlock?
**********************************************
Start Up Failed:
Your device didn't start up successfully.
Use the Software Repair Assistant on computer to repair your device.
Connect your device to your computer to get the Software Repair Assistant.
AP Fastboot Flash Mode (Secure)
hab check failed for boot
Failed to verify hab image boot
failed to validate boot image
EROOR: Failed to pass validation, backup fastboot
Fastboot Reason: Fall-through from normal boot mode
its displays when i flash
how to fix it?
Read drs22's post above ! He's mentioned the link you can follow to fix this, follow the steps to the 'T' and ensure you download a more recent version of the ROM.
Hello. I have a Moto G6 with cfw and it was running more or less fine. Recently I updated Magisk through Magisk Manager (it said the update partially failed) and now I can't boot, and when I try to decrypt /data in TWRP I can't even though I'm 100% sure the password is correct. The error I get on start is
Code:
Start Up Failed:
Your device didn't start up successfully.
Use the Software Repair Assistant on computer to repair your device.
Connect your device to your computer to get the Software Repair Assistant.
AP Fastboot Flash Mode (Secure)
Invalid boot image header!
Error: failed to load kernel!
Fastboot Reason: Fall-through from charger boot mode
I've already tried running
e2fsck /dev/block/platform/soc/7824900.sdhci/by-name/boot
Can anyone help?
i tried to flash the PIE US99830b TWRP zip (was on OREO h) via TWRP. Got stuck at V30 boot logo. OREO was correctly flashed last year and havent had any issues.
Attempted to factory wipe via power+vol down and it goes back to boot screen. I also cannot power down the phone. I was able to get to download mode by usb+vol up after the factory wipe screen. I've tried 2 different versions of the patched LGUP. One being the pie version and the other, the original version i used to flash OREO. Both say no handset connected. I see no device in device manager on my pc. I know my usb cable is working because the device will show up when i plug the usb in during the boot logo hang.
Download screen shows:
Unknown B35
Unknown / E /L / RQ
is my device hard bricked?