I have Stratos 3. I am using this watch for last 10 months. Last two days my watch does not connect to my phone again, when connection is lost (phone is to far from watch).
Before that, it has always reconect, when phone was close enough for BT connection.
Does anyone have the same problems?
Yeah, it happened to me too. I then tried factory reset and pairing with qr code again but that also fails. So, I am stuck on qr code screen on my watch and can't connect to my phone.
You should perform another factory reset and connect again.
Have the problem too.
I think the problem is the last zepp version.
I'm doing a rollback to 9 December version. just now. Let's see if will solve.
Bonjour,
Avez-vous toujours le problème de déconnexion Bluetooth de la montre?
Related
My phone used to be paired with my G watch, but after some problems, I decided to factory reset my watch and pair anew. till then it does not happen. at 1st my phone recognizes the watch and the code appears and I push the "pair" button, and it says "paired!", after that on my watch appears "updating" and then "syncing" but it takes a long time. For the android wear, the "updating" is on the screen the whole time, and when finished, nothing has happened and the watch isn't paired. I updated my andoird wear, cleaned its casch but no success. I've tried several times. My phone is htc e9 with lolipop, so is my G watch, with lolipop.
what should I do? some guy told me to update my watch, but it is not possibble as no network with unpaired phone. I also tried connecting the watch to pc and update it from there, bụt pc doesnt recognize the watch. help me please.
Try to reinstall the Android Wear app and sync the watch, it could probably fix the problem.
As i tried to make a firmware upgrade to my Amazfit Cor Band with the Notify&Fitness for Amazfit App, the band got stucked when the update initiated and remained so. Now, on the screen, there is only the circle that should fill up while the update progresses, and i cand do nothing else on it. What is your solution? How can i get the band going again? Is there some way to reboot or reset it?
I have the same problem, it began to try to update itself and will not connect to the phone, it's stuck in the update mode so it keeps failing to pair to the phone again after unpaired and app uninstalled, phone restarted etc. Is there a way to get it to 'reset'?
Sent from my Pixel 2 using Tapatalk
Hi all,
Thanks for taking the time to read.
I bought my Bip back in February and it has been a joy to use. About 3 weeks ago I opened the MiFit app and it said as it often did that there was a new firmware and proceeded to run an update. It had done this many times before without a problem. This time however when returning to the watch it said "Connect to APP to update". I tried connecting it to the app but each time I pressed tick on the watch the phone gave an error that the connection was refused. I checked the Amazfit support pages and followed the suggestions of rebooting the phone, forgetting the watch in the app and then in the bluetooth settings on the phone but the problem still persists. I tried it on the wife's iphone to rule out my handset but got the same error. The watch is not visible in the bluetooth settings of the phone.
Video of problem: /drive.google.com/file/d/11ftktWFmqf4dFrWyyg9fMEOrCNhr3kEn/view?usp=sharing
Since then I have tried on an Android phone and got a bit further. With Android I can pair through bluetooth but when running the MiFit app I get an error that the connection fails when trying to pair up the watch. I then installed the "Notify and Fitness" app which does see the watch however on attempting to update the firmware or resources it fails at 98-99%. When using the tests in the app I can get the watch to run a heart rate test and vibrate. Also if I flash with a chinese res file then the language of the error also changes.
I have tried using the two alternative methods of update, new and old firmware but to no avail. I have also tried doing this without the MiFit ap installed and firmware updates through gadget bridge.
One last thing to try is for the battery to run down and restart the thing but I am still a week at least away from 0% and Have been trying to fix it for a fortnight
Do any of teh gurus of XDA have any tips or suggestions of what else I could try?
Thanks in advance!
Any solution in 2019 using iphone?
Hello.
Did you solve this problem?
I found solutions but they were wrote more than a year ago...
And all of them used android phones to install new (now old) firmwares, but I only can use my iphone...
nategs said:
Hi all,
Thanks for taking the time to read.
I bought my Bip back in February and it has been a joy to use. About 3 weeks ago I opened the MiFit app and it said as it often did that there was a new firmware and proceeded to run an update. It had done this many times before without a problem. This time however when returning to the watch it said "Connect to APP to update". I tried connecting it to the app but each time I pressed tick on the watch the phone gave an error that the connection was refused. I checked the Amazfit support pages and followed the suggestions of rebooting the phone, forgetting the watch in the app and then in the bluetooth settings on the phone but the problem still persists. I tried it on the wife's iphone to rule out my handset but got the same error. The watch is not visible in the bluetooth settings of the phone.
Video of problem: /drive.google.com/file/d/11ftktWFmqf4dFrWyyg9fMEOrCNhr3kEn/view?usp=sharing
Since then I have tried on an Android phone and got a bit further. With Android I can pair through bluetooth but when running the MiFit app I get an error that the connection fails when trying to pair up the watch. I then installed the "Notify and Fitness" app which does see the watch however on attempting to update the firmware or resources it fails at 98-99%. When using the tests in the app I can get the watch to run a heart rate test and vibrate. Also if I flash with a chinese res file then the language of the error also changes.
I have tried using the two alternative methods of update, new and old firmware but to no avail. I have also tried doing this without the MiFit ap installed and firmware updates through gadget bridge.
One last thing to try is for the battery to run down and restart the thing but I am still a week at least away from 0% and Have been trying to fix it for a fortnight
Do any of teh gurus of XDA have any tips or suggestions of what else I could try?
Thanks in advance!
Click to expand...
Click to collapse
I let it run down helped along by repeated vibration tests but eventually after about 3 weeks the thing ran out of juice. Charged it and started it back up and it booted up fine, it has been fine since! great little watch but really needs a hard reset button.
Good luck
Recently my Amazfit BIP automatically updated and it stoped being able to connect via bluetooth.
So I tried to reset to factory settings and now the Amazfit is frozen an its screen only shows the icon of connecting the watch to the smartphone, and it's not possible to stop this process.
I've tried to use different apps to connect and although they can find the watch, they are unable to connect.
Have anyone faced a similar situation?
Wait till it drains out en then start it up again. U should see the pair to device icon
Hi there
I am struggling to pair the Amazfit Pace with my iphone. I scan the QR Code and get an Error Message that says I need to unpair the device from bluetooth. The problem is, it's not in the bluetooth list for me to unpair it. I tried other devices including an iPhone 5... same error issue. I reset my iPhone, I removed Amazfit App from the storage of my iPhone.
What is this error? What do I need to do? Is this an Amazfit App issue?
I cannot get past the QR Code screen to see or do anything more than drive myself crazy going to the bluetooth setting to remove the device, knowing full well, it's not in the list.
any help? Or is this a junk smart watch?
The watch is new? If yes, probably you must first update the firmware using and Android phone with Android 7.1 or older, or use a Huami tool to install at lest firmware 1.3.8. If it's not brand new, probably it was paired with another account, then you must first unpair it properly from that account...
Edit: if you haven't done it yet, restarting the watch a couple of times may help too.