Related
Hi all!
I live in Germany and would like to buy a RN3 pro from Aliexpress. I don't want to stick around with MIUI but would like to try out different CM-based ROMs. The community here seems very alive, but I am confused by certain things. So I hope you can help me :highfive:
1) Some months ago, I followed the news about the Mi4c. People were complaining that Xiaomi won't let them unlock their phones. Are there no such problems with the RN3 pro?
2) Concerning the official firmware: I read that the phones come either with a Chinese or international firmware (or sometimes even bloated by retailers), and each has a hundred of version numbers. Are all versions possible to unlock? Or do I need a particular version to be able to root/unlock bootloader/flash a custom ROM?
3) Are there any differences between the 2/16 gig and the 3/32 gig version of the RN3pro apart from RAM/storage?
4) Is Xposed working fine on CM-based ROMs?
Best regards
1. I spent around a month to get it officially unlocked, till then I unlocked unofficially in few mins. But if you unofficially unlock whenever you flash a rom you must be more conscious and read every step that's given by Developer or else you will end up bricking your device(don't worry there are solutions for very bricking scenario) . So if this is not a concern you can buy
2. Whatever the firmware phone may come with you can flash MIUI global firmware and unlock it from there.
3. Nope not that I know of.
4. Yes it's working.
Welcome to the community.
Sent from my Redmi Note 3 using XDA-Developers mobile app
AntaresFP said:
Hi all!
I live in Germany and would like to buy a RN3 pro from Aliexpress. I don't want to stick around with MIUI but would like to try out different CM-based ROMs. The community here seems very alive, but I am confused by certain things. So I hope you can help me :highfive:
1) Some months ago, I followed the news about the Mi4c. People were complaining that Xiaomi won't let them unlock their phones. Are there no such problems with the RN3 pro?
2) Concerning the official firmware: I read that the phones come either with a Chinese or international firmware (or sometimes even bloated by retailers), and each has a hundred of version numbers. Are all versions possible to unlock? Or do I need a particular version to be able to root/unlock bootloader/flash a custom ROM?
3) Are there any differences between the 2/16 gig and the 3/32 gig version of the RN3pro apart from RAM/storage?
4) Is Xposed working fine on CM-based ROMs?
Best regards
Click to expand...
Click to collapse
1)as an unlock reason I pasted some chineese text found in the Internet and after 1 week I got my unlock code. So no problem there
2)Developer rom is recommended for that, but I think that the never versions of stable build also support unlocking. Anyway, it's easy to install developer rom with locked bootloader
3)nope
4)yep
Sent from Note 3, Xiaomi Redmi Note 3.
Give yu yunicorn a try
AntaresFP said:
Hi all!
I live in Germany and would like to buy a RN3 pro from Aliexpress. I don't want to stick around with MIUI but would like to try out different CM-based ROMs. The community here seems very alive, but I am confused by certain things. So I hope you can help me :highfive:
1) Some months ago, I followed the news about the Mi4c. People were complaining that Xiaomi won't let them unlock their phones. Are there no such problems with the RN3 pro?
2) Concerning the official firmware: I read that the phones come either with a Chinese or international firmware (or sometimes even bloated by retailers), and each has a hundred of version numbers. Are all versions possible to unlock? Or do I need a particular version to be able to root/unlock bootloader/flash a custom ROM?
3) Are there any differences between the 2/16 gig and the 3/32 gig version of the RN3pro apart from RAM/storage?
4) Is Xposed working fine on CM-based ROMs?
Best regards
Click to expand...
Click to collapse
1) If the phone is updated to the latest firmware (7.3.2 at the time of writting) then the bootloader unlocking process time will depend on how long it takes them to approve the permission for you (got my phone on Tuesday and unlocked it today).
2)Yes all are eligible, but you have to be on the latest one. Likely you will get with an outdated Chinese rom and will have to update via MIUI updater (or similar name of the official software). I also suggest looking for the phone from else where, like here in the EU (think ebay.ie had some cheap ones), since i had to pay an extra 50eur for taxes and expenses (am from Lithuania).
3) No idea, likely none. I got the 3gb version because it's more future proof and can upload 2 videos at the same time vie desktop version of facebook. Also the software itself uses about a gig of ram. Plus it's doesn't cost that much more and a gig of ram makes a difference.
4) No idea, wasn't a fan of xpossed before and am not planing to become one.
xposed works on miui? just curious
reggiexp said:
xposed works on miui? just curious
Click to expand...
Click to collapse
Yes it works. Make sure to use MIUI Xposed version. Google it.
Flyme 7 Coming to Older Phones Like Meizu PRO 5.. to see click here :fingers-crossed:
It's good news, currently only 4.7% of mobile phones have Oreo.
The trouble is until Flyme gets stable
And if there are new drivers maybe someone (@faust93) is able to port it to Resurrection Remix 6, which is still in beta on most phones
You just have to wait and all the pieces are put together
They just released the Meizu 15 with Android 7.1.2. and Flyme OS 7, does not even come with Oreo.
I'm very disappointed!
Meizu is one year behind in the design and software of its mobile phones. They pass the fashions without offering anything.
I expected them to catch up, but nothing. He's going to win a bad name forever.
They will end up putting the sign closed for vacations, which we already know what it means.
Above, they do not pay Google for having Google Play well. The International Version is a fake, they aren't Certified
And they also have blocked the bootloader so you can not install any ROM (there are none in the Meizu Pro 6, Pro 7).
My next mobile will not be a Meizu is clear. In 2015, they competed with Xiaomi, I thought that they would get over them but they have chosen very bad strategies, such as making several versions (China, the International), moving away from Google, problems with apps, very similar designs for all their phones, prices that are too high compared to the competition , many software failures in Flyme, without Android updates ...
Luckily I have it with RR and Android 7.1.2 (in 3G and without finger print but this does not matter at all). And I'm happy with him !!
You do not need another Android if you have it well customized (Substratum, Exposed, Magisk Manager ..).
But it would be cool to have RR with Oreo..
Flyme 7 is out since 22.04.18 and IS NOT BASED on Oreo
It's again based on Nougat 7.0
I've tried 7.8.4.22 A, not soo bad, some little bugs with camera and other things but overall 's good
in 2022 i bet they are going to have oreo
or meizu will die
Meizu has disappointed me so much that I bought another mobile (not from Meizu). I have endured so much thanks to the Faust93 ROM but I could not do it anymore, it was a little on a whim, more than other things
Meizu was downgrading ever since 2015 and their strategy to focus on the Chinese market with dozens of new devices every year led to abandoning all their previous flagships and lack of focus on software updates. Obviously providing regular up-to-date upgrades does not bring in too much revenue compared to the new devices ranging from budget to flagships that bring in millions. This fact showed their real face - hunt for money rather than for creating an outstanding product and attracting even more customers. Pro 5 is my first Meizu phone and is definitely the last one. Even with running RR 7.1.2 and fully and smoothly functioning hardware, I do really lack fingerprint option and I don't like having any sacrifices on the device. which once used to be a flagship and still has pretty powerful insides to date. I like trying different roms and flashing firmware, but for the testing purposes, not because I am forced to in order to have more or less up-to-date Android version and properly working Google Services and Play Store. This is just ridiculous and disgusting.
Did someone tried flyme 7, this version 7.8.5.8?
hi everybody.
I'm surfing the internet.
https://www.getdroidtips.com/flyme-os-7-meizu-pro-5/
I came across this site.
I downloaded and installed the Meizu pro5 Flyme 7.0.2.0A from the https://www.flyme.cn/firmwarelist-23.html#3 link provided on the site. I got backup of my phone. I've installed wipe cache. And it works.
I wanted to share it with you.
Notes:
- I had a flyme 6.3 rom.
- I installed vipe cache from the first installation. sim network did not work. vipe cache cleaning and installed all functions worked.
-Flyme has added facial recognition and works very nicely.
- Press the power button. I installed the version uplink type. As described in the first link. (https://www.getdroidtips.com/flyme-os-7-meizu-pro-5/)
-I've been using it for two days. very nice. Flyme7 is the original system board and stable.
- Before loading, change the ro.product.locale = zh-CN line in the zip file (update.zip/system/build.prop) to -> ro.product.locale = en-US.
- Bad news - I use English. Problems can occur in other languages.
The pro5 really got android 8.0!?
Maybe I should (after switching to the global version a year ago) back to the chinese roms...
Are the google apps all working? Incl. contacts etc?
Thanks already for the update!
pro 5 now is with oreo??
i´m speechless lol
Unfortunately nope, Oreo was only a dream for us
kanaxe said:
hi everybody.
I'm surfing the internet.
https://www.getdroidtips.com/flyme-os-7-meizu-pro-5/
I came across this site.
I downloaded and installed the Meizu pro5 Flyme 7.0.2.0A from the https://www.flyme.cn/firmwarelist-23.html#3 link provided on the site. I got backup of my phone. I've installed wipe cache. And it works.
I wanted to share it with you.
Notes:
- I had a flyme 6.3 rom.
- I installed vipe cache from the first installation. sim network did not work. vipe cache cleaning and installed all functions worked.
-Flyme has added facial recognition and works very nicely.
- Press the power button. I installed the version uplink type. As described in the first link. (https://www.getdroidtips.com/flyme-os-7-meizu-pro-5/)
-I've been using it for two days. very nice. Flyme7 is the original system board and stable.
- Before loading, change the ro.product.locale = zh-CN line in the zip file (update.zip/system/build.prop) to -> ro.product.locale = en-US.
- Bad news - I use English. Problems can occur in other languages.
Click to expand...
Click to collapse
can i use this as daily driver? any bugs etc?
Mollic said:
can i use this as daily driver? any bugs etc?
Click to expand...
Click to collapse
U can use it as daily rom, it's almost near to perfection. But it's not new, it's 2018.08.10 so 3 months old.
:good:
Hi all,
Since it seems there are not updates coming for the global version of pro5 anymore I am considering to switch to the Chinese ROM.
Is it possible to install the latest Chinese version to a GLOBAL Pro5?
If it is a more complex process, do you have instructions a link that shows how to do it?
Thanks a lot!
Jan
badreligion said:
Hi all,
Since it seems there are not updates coming for the global version of pro5 anymore I am considering to switch to the Chinese ROM.
Is it possible to install the latest Chinese version to a GLOBAL Pro5?
If it is a more complex process, do you have instructions a link that shows how to do it?
Thanks a lot!
Jan
Click to expand...
Click to collapse
i think you have to change the product label to chinese ( i tried without doing so and i failed miserably )
it's depend on what recovery you use to update, stock or TWRP. If with TWRP, you need to replace bootloader and recovery in zip to be unlocked bootloader and custom recovery.
Hello together.
My Problem is that I want to give my Xiaomi Redmi Note 4 with Snapdragon SoC to my daughter.
I tried to login with her Google Account and the device Shows like picture below.
IT says Update to Android 7 and Google Service is recomended.
I tried with official Lineage OS 15.1 and Pixel Experience Oreo, always the same notification comes if I try to login my daughters Gmail Account.
Is there any solution for this? Is family link not working with custom Roms at all?
Please help me.
Bietschek said:
Hello together.
My Problem is that I want to give my Xiaomi Redmi Note 4 with Snapdragon SoC to my daughter.
I tried to login with her Google Account and the device Shows like picture below.
IT says Update to Android 7 and Google Service is recomended.
I tried with official Lineage OS 15.1 and Pixel Experience Oreo, always the same notification comes if I try to login my daughters Gmail Account.
Is there any solution for this? Is family link not working with custom Roms at all?
Please help me.
Click to expand...
Click to collapse
Did you flash GApps?
On Lineage 15.1 I installed gapps from open gapps.
On pixel experience i didn't Flash Gapps because they are included in that Rom. Between Rom Installation I always did a wipe.
Nougat
So try to flash nougat firmware with latest gapps and see if it works instead of Oreo.
@Bietschek Have you a solution for this?
I'm having a similar problem with a Redmi Note 3.
No, I don't have solution for custom Rom.
I flashed back original latest Miui. Now it work's.
Bietschek said:
No, I don't have solution for custom Rom.
I flashed back original latest Miui. Now it work's.
Click to expand...
Click to collapse
what rom do you use? could you provide a link?
I had some issues on miui roms(like rebooting and forceclosing of some apps/games) and none of that on custom pie roms, but family link works only on miui.
seniorivn said:
what rom do you use? could you provide a link?
I had some issues on miui roms(like rebooting and forceclosing of some apps/games) and none of that on custom pie roms, but family link works only on miui.
Click to expand...
Click to collapse
I was on different Lineage OS Rom. And in all family link didn't work.
Flash micro gapps
I had exactly the same problem today.
The solution is using "stock" package of gapps.
schub kahn said:
I had exactly the same problem today.
The solution is using "stock" package of gapps.
Click to expand...
Click to collapse
That is interesting and make sense. Thank you for your information. Will try it out next time.
LOS 14.1 and gapps
Bietschek said:
That is interesting and make sense. Thank you for your information. Will try it out next time.
Click to expand...
Click to collapse
I have flashed LOS 14.1. (unofficial) for MiPad and gapps for 7.1 stock 20190920, but I was not able to create children account on the device. Somebody who is successful with LOS 14.1 here?
tombic said:
I have flashed LOS 14.1. (unofficial) for MiPad and gapps for 7.1 stock 20190920, but I was not able to create children account on the device. Somebody who is successful with LOS 14.1 here?
Click to expand...
Click to collapse
You can get Family Link App directly from the Play store now. There's an App for parents and another one for children/teens:
https://play.google.com/store/apps/details?id=com.google.android.apps.kids.familylink
https://play.google.com/store/apps/details?id=com.google.android.apps.kids.familylinkhelper
Noter2017 said:
You can get Family Link App directly from the Play store now. There's an App for parents and another one for children/teens:
https://play.google.com/store/apps/details?id=com.google.android.apps.kids.familylink
https://play.google.com/store/apps/details?id=com.google.android.apps.kids.familylinkhelper
Click to expand...
Click to collapse
Hi,
of course I can, but I have to create account on device first. And that is not possible for children account. When I create "normal" account, then I can not create childrens account as second account (that is blocked by family link). So children account must be the only one account on device and it is not possible to create right after fresh LOS and gapps installation.
tombic said:
Hi,
of course I can, but I have to create account on device first. And that is not possible for children account. When I create "normal" account, then I can not create childrens account as second account (that is blocked by family link). So children account must be the only one account on device and it is not possible to create right after fresh LOS and gapps installation.
Click to expand...
Click to collapse
Maybe this helps you in this german Google support forum. https://support.google.com/accounts/thread/11832480?msgid=11935346
Unfortunately even with this workaround I did not get it to work on an old Xiaomi Redmi Note 3 SE (kate) with pie custom rom (Havoc OS) and gapps (standard/stock, micro, mini). Is the open bootloader the problem at the end of the day?
I have the same problem with a note 3 SE kate, only works with stock rom.
I found a solution to get Family Link working on custom ROM and GAPPS:
0. Be sure, that on parents device Family Link (for parents) is installed and working.
1. Create an adult (>21y.o.) account for child (maybe will be acceptable change age in existing account).
2. Sign in with this account in child's device.
3. Install Family Link for kids on child's device - but no setup is needed.
4. Log in in browser on PC in this account and change age to <13 y.o. - this will cause alert, that this account should be bind with parents account or will be suspended in 14 days.
5. According to instructions from previous alert - perform binding your parent and child accounts.
6. After successul binding - on child's device will be a notification, that account is needed to setup - perform it.
7. Profit!
Tested on two Xiaomi Mi4c - LineageOS 14.1 + opengapps (micro) and LineageOS 17.1 + opengapps (pico).
Hi guys,
this is my first experience report about my new Poco X3 NFC with Miumi 12 after 14 days in use....
To explain: 2 years ago i got my first xiaomi redmi note 6 pro global. This machine is a fine thing, but i never liked the miui surface. So i decided to unlock and root the phone and use a custom rom. This was the very best decision for me.
So far, so good... At least i bougth my new Poco X3 NFC and i got 14 days ago. I heard a lot of "good" things about the new Miui 12, so that was one reason for me to catch this deal....
After nearby 14 days using this phone with this original surface Miui 12 i can say: it sucks, nothing else but the original apps are running smooth. It is nearly impossible to run an alternative launcher, really nothing runs flawless on this terrible, awful surface! The simplest things like "notification badges" etc. are not present, they still are not in function...
Ok, Miui "spend" a launcher: Poco Launcher. Hmm, nearby, but (for me) lightyears away from any kind of personalization. Change icons? Runs partially... Want to unlink the fu..... ring- and notification sounds? Misrepresented!!! This (for me) confusing settings menu? There is no better thing than a clean android system or custom rom!
The next annoying crap is the annoying advertising - i spend a "little" time to "destroy" this really sucking "feature".....
Oh, before i forgot: i tried to run the launchair launcher, ruthless launcher, nova launcher, microsoft launcher and at least hyperion launcher. With all this launchers it is on my phone totally impossible to run all features - on every other phone with custom rom or original they run like hell!
The one and only way to operate this phone "fine and smoothly" is this: leave it in its original condition! But who wants this? Personalization? Inadequate....
But yes, there are two things they are fine: the energy options and the camera app. But thats it for me.
So, this is my experience after 14 days and the next thing i will do is unlock the bootloader, install a recovery systen (maybe twrp or orange fox) and root the phone with magisk. With this solution i hope to improve some things - i 'll keep testing this
Best wishes and greets
I'm using Nova Launcher on all devices since a couple of years. Mui has the habit of preventing background tasks and autostart(never saw this before) for all apps except Xiaomi and Google ones and probably a few other. Autostart, notifications and widgets i only need for a handful of apps(including the launcher), and none of these worked out of the box.
But all relevant options are bundled in the app's context menu, no scrolling thru huge lists including all the system apps. Simply allow autostart, disable powersaving and give the app more or less all access rights. Running pretty well now. It's only the most bloated phone i ever had, but also the most powerful, so thats not an issue at present.
Hi lecorbusier,
thanks for your answer.
With your sentence >It's only the most bloated phone i ever had, but also the most powerful< your totally right
Yesterday i unlocked my X3, flashed TWRP - and wow: System destroyed....
Turned to fastboot, flashed OrangeFox, puh, it 's not broken....
Flashed Magisk also and today i will see what happen....
Lmao, who told you that MIUI is a good thing. It's ok, but compared to custom ROM it sucks.
If you want to try custom ROM, ArrowOS is the best optimized custom ROM + Void custom kernel If you want maximum fluidity/smoothness as it's optimized for minimum latency and jank. Battery life is still good in my usage, maybe 2 hours less maximum, but it's worth it. With stock kernel, SOT is a bit better.
ArrowOS gets improvements every day on ROM side with fixes & improvements + occasionally improvements & fixes to the device side.
I tried 5 other custom ROMs (crDroid, Resurrection Remix, LineageOS 17.1, CorvusOS, NitrogenOS) and that's my experience.
Everything works except fast charging information with Xiaomi charger (all custom ROMs have this issue) & Miracast (which I'm not sure if it works or not since I never used it).
So all in all, just flash custom ROM in this one too!
Devil's advocate here ( ), Xiaomi.eu with updated firmware and Stormbreaker kernel feels smooth as butter here -- but it takes some intensive tweaking.
Hi there, good morning from Germany
A short "update"....
After "repairing" (see 3 posts above) I've done the following:
Installed Lsposed (Magisk), installed CustoMIUIzer and started "playing" with the mass of settings in it....
What should I say: I'm pretty impressed.
Almost everything is going as hoped and does what it should! Till now I got no numbers on my notification badges, but this is a part I can live with.
That doesn't mean that i have changed my opinion about the MIUI-Surface, especially the terribly nested settings.... But with a bit of work you can establish a relatively well-running system that you can personalize according to your wishes.
So for the moment I'm pretty happy, but I'm still testing...
Ah, before i forget to mention: magisk and safetynet was another problem. I have found a module that works (for me), look here
So, thats it for today, many greetings and happy easter
Hello everyone,
here 's another short update for miui....
The good news first: it runs, Ruthless Launcher is working, original camera app is fine, other things: see my post above...
That 's it!
Unlock by (or with) bluetooth??? Fail! It seems that Xiaomi only supports its own devices - what a crap.... I clearly miss this function.
I stick to my opinion: miui sucks....
The only point that keeps me from installing a custom rom is the camera app (at least for the moment)...
My conclusion: to use all possibilities of this device you "must" use a custom rom, otherwise you have to live with the restrictions
thueringer said:
The only point that keeps me from installing a custom rom is the camera app (at least for the moment)...
Click to expand...
Click to collapse
My main reason to keep Xiaomi.eu, too. When LOS becomes official, I'll brace myself for intensive testing of camera alternatives...
for me, personally, i dont like miui as well. luckily we have a bunch of custom roms out there and even i found a better rom for my daily use, i still try flashing some rom to experience some other features. tho, at the end of the day, i end up using my rom that i am using daily. if you want the rom with alot of customization, have a good BB, and have miui camera, i suggest to use Ancient OS
Hi all together
@dahrel22: thanks for your tip, it seems like this is what i was looking for...
I think I'll test it out, I can't do more than break it
Have a nice Sunday, many greetings from here...
thueringer said:
Hi all together
@dahrel22: thanks for your tip, it seems like this is what i was looking for...
I think I'll test it out, I can't do more than break it
Have a nice Sunday, many greetings from here...
Click to expand...
Click to collapse
yes bro you better try it. im currently using the old build which is the miui verdor based. the new build comes with oss vendor but i think im not ready to flash it. i having trouble keeping my phone decrypted from oss vendor based roms. so i'll still be using the old build.
After the updates my Poco x3 NFC restarts in stand-by mode or when I'm using whatsapp, suddenly the screen goes to black..and then back to the homescreen... :/
Does anybody tried a custom rom? I would like to give a try.
Hello to everybody,
here 's my newest experience with "Miui-machine"...
I tried the tip from dahrel22 (see 4 posts above) und flashed Ancient OS 5.3 - I did everything according to the description, but in the end I had an encrypted partition on my phone....
Yesterday I had the great idea to cleam my device up und flash it again...
What can i say: it was a horrible trip
Like before I 've done everything as described - but it ends with a lot of issues like "no root" and "no system" directory, unable to mount system partion and so on and so on... This action cost me a lot of annoyance
(I tried this with two custom roms: Ancient OS 5.4 and Evolution X).
I was then able to revive the device using fastboot and the mi flashtool.
The Mi-Flashtool also ended with an error, but the system works - for whatever reason???
So at the moment I'm "driving" this damn Miui again and I'm really pissed off!
Maybe someone from you has a "smooth" idea to solve my problem??
Many greetings and thanks
thueringer said:
Hello to everybody,
here 's my newest experience with "Miui-machine"...
I tried the tip from dahrel22 (see 4 posts above) und flashed Ancient OS 5.3 - I did everything according to the description, but in the end I had an encrypted partition on my phone....
Yesterday I had the great idea to cleam my device up und flash it again...
What can i say: it was a horrible trip
Like before I 've done everything as described - but it ends with a lot of issues like "no root" and "no system" directory, unable to mount system partion and so on and so on... This action cost me a lot of annoyance
(I tried this with two custom roms: Ancient OS 5.4 and Evolution X).
I was then able to revive the device using fastboot and the mi flashtool.
The Mi-Flashtool also ended with an error, but the system works - for whatever reason???
So at the moment I'm "driving" this damn Miui again and I'm really pissed off!
Maybe someone from you has a "smooth" idea to solve my problem??
Many greetings and thanks
Click to expand...
Click to collapse
im feel so sorry when i read your experience. maybe some confusion because 2 builds at the same version have different vendor based. both of them are comes with 5.3 but one comes with miui, one comes with oss. as i say i really have a hard time to keep my phone decrypted on oss when im using orange fox (now im in twrp but still no planning of flashing oss) if you flashed the old build, i mean the miui vendor based build, i think the outcome will be better.
what version of miui are you into right now?
edit: you know i feel bad for you as you need to do this "mi-flashtool" kind of stuff. next time, if you make mistake flashing something, i suggest just to flash miui rom again (miui eu will do) using recovery (i suggest twrp). i did that before many times and it never fails me.
dahrel22 said:
im feel so sorry when i read your experience. maybe some confusion because 2 builds at the same version have different vendor based. both of them are comes with 5.3 but one comes with miui, one comes with oss. as i say i really have a hard time to keep my phone decrypted on oss when im using orange fox (now im in twrp but still no planning of flashing oss) if you flashed the old build, i mean the miui vendor based build, i think the outcome will be better.
what version of miui are you into right now?
Click to expand...
Click to collapse
Hi dahrel, at the moment I 'm on Miui 12... I tried to flash with OF and TWRP.
thueringer said:
Hi dahrel, at the moment I 'm on Miui 12... I tried to flash with OF and TWRP.
Click to expand...
Click to collapse
with the newest miui 12.0.9 from xiaomi eu? have you flashed the decrypted vendor? then try to flash the oldest ancient 5.3, anyways, one more stable rom i used is PE+. the new anx cam 2.4 works pretty well.
dahrel22 said:
with the newest miui 12.0.9 from xiaomi eu? have you flashed the decrypted vendor
Click to expand...
Click to collapse
Hi dahrel22, I used the Miui 12.0.8 global. What do you mean with the decrypted vendor?
I don't know the PE+...
thueringer said:
Hi dahrel22, I used the Miui 12.0.8 global. What do you mean with the decrypted vendor?
I don't know the PE+...
Click to expand...
Click to collapse
oh i mean, you keep your phone decrypted?
i usually flash the unencrypted vendor so i dont have to flash dfe. you can find it from here.
12.0.8.0
[PATCH] Disable encryption for XIAOMI.EU ROM
disable data encryption, MLC nand write cycle is limited and encryption is make it worst how to : - download and unzip xiaomi.eu_multi_POCOX3NFC_V12.0.4.0.QJGMIXM_v12-10.zip - download and unzip vendor patch...
forum.xda-developers.com
and for 12.0.9.0
[PATCH] Disable encryption for XIAOMI.EU ROM
disable data encryption, MLC nand write cycle is limited and encryption is make it worst how to : - download and unzip xiaomi.eu_multi_POCOX3NFC_V12.0.4.0.QJGMIXM_v12-10.zip - download and unzip vendor patch...
forum.xda-developers.com
thanks to @inunxelex
which rom you want to flash now?
Hi dahrel, thank you very much for the links above
I 'm not sure which rom i 'll flash next time - maybe Ancient OS or Evolution...
are you following poco x3 updates on telegram? you can find alot of custom roms from there. some are those you cant find here.
POCO X3 | Updates
All about POCO X3 ROMs, Kernels, Guides, Mods, NEWS, everything. Stay up-to-date with us! Official Group: @PocoX3GlobalOfficial
t.me
So I possess a Redmi Note 10 Indian variant with 4 GB ram. For the past month, I have been using Pixel Experience Plus and it was smooth until the last week's update. Then it came to my notice that I haven't installed the latest MIUI 13 "Firmware" as the developer said. So I got and flashed the Global ROM V13.0.5.0.SKGMIXM (even though my device was shipped with Indian ROM) via Xiaomi Flash because Indian ROM V12.5.6.0.RKGINXM is still in MIUI 12.
Oops! That was probably the worst mistake I had made coz my phone had restarted at least a dozen times unexpectedly even while the phone is locked and unlocked (referring to screen lock) Now it's barely usable.
So here are my questions:
Is this a bug with MIUI or did I mess something up big time?
I use the terms firmware and ROM interchangeably but are they different?
How to install firmware via fastboot?
I know that was a lot of questions but please help me if possible because this is my main device
Thanks a lot
Injector287 said:
So I possess a Redmi Note 10 Indian variant with 4 GB ram. For the past month, I have been using Pixel Experience Plus and it was smooth until the last week's update. Then it came to my notice that I haven't installed the latest MIUI 13 "Firmware" as the developer said. So I got and flashed the Global ROM V13.0.5.0.SKGMIXM (even though my device was shipped with Indian ROM) via Xiaomi Flash because Indian ROM V12.5.6.0.RKGINXM is still in MIUI 12.
Oops! That was probably the worst mistake I had made coz my phone had restarted at least a dozen times unexpectedly even while the phone is locked and unlocked (referring to screen lock) Now it's barely usable.
So here are my questions:
Is this a bug with MIUI or did I mess something up big time?
I use the terms firmware and ROM interchangeably but are they different?
How to install firmware?
Finally, can I safely downgrade my device to the 12.5.6 Indian variant without bricking my device?
I know that was a lot of questions but please help me if possible because this is my main device
Thanks a lot
Click to expand...
Click to collapse
First off, don't try to make an update while the device has a kind of lock, either the screen or user encryption (not referring to in-built encryption).
Generically, firmware makes a reference to a specific build, this applies for any ROM, for any device out there.
The set of specific partitions, that are called firmware in the Xiaomi world, are also in any fastboot ROM.
But like the different firmware versions are usually available for almost (if not all) Xiaomi devices, in great part, thanks to @yshalsager, you can just pick up the one you need and flash it before or after (over) any (that supports it or needs it) custom ROM.
Just refer to here https://forum.xda-developers.com/t/firmware-redmi-note-10-mojito-auto-updated.4254017/page-3 as you can see, what you need, was there.
Well what i can tell you with experience might enlighten the situation. I changed my rom from global to Indonesian on MIUI 12. It was working very well no lags no issue infact i was loving it . Then came MIUI 13 V13.0.2.0.SKGIDXM.
my phone became like a sluggish snail. A lot of lags, different apps not working really hateful. There was no escape. so after bearing it was 2 months i down graded back to MIUI 12. Now i think i will stay there until some one let me know MIUI 13 is bug free