Hi
whenever I connect hero to pc it shows Usb device not recognised I try almost every ROM but problem perish, also using latest HTC sync... plz help :'(
Anyone there????
hirencj said:
Anyone there????
Click to expand...
Click to collapse
Tried a different USB Port and/or cable?
Lirasina said:
Tried a different USB Port and/or cable?
Click to expand...
Click to collapse
I tried every port but not with different cable.. will buy new cable n will give it a try..thanx
hi everyone. i have a tablet aliexpress . com/snapshot/313581209 . htm and there in description is "usb host 1", but there is not usb on this tablet. i try to connect usb via otg - tablet doesnot see it and no power on usb.
does mtk6572 support usb host or otg? mabey producer forgot to install drivers for this?
doest anyone has datasheet for mtk6572?
here bbs.52rd.com/Thread-266424-1-1.html is datasheet - can anyone download it? thx
here download.eeworld.com.cn/download/rubyonrails/249524 can anyone download?
mtk6572 datasheet
can any one tell how to connect usb host or otg? i mean just data cables. no more
macepa said:
can any one tell how to connect usb host or otg? i mean just data cables. no more
Click to expand...
Click to collapse
I've try to connect a USB Stick on a Samsumg S3... it work out the box: a pop up appears on Android und leds blinking on the device.
Then I try with another smartphone with a MTK6572 (Alcatel one touch idol mini), but it didn't work. I've use the same cable and the same USB Sitck
Maybe you will be luckier... but be sure to use a OTG cable, the 4th pin (sense) must be grounded to the 5th pin (GND) on the micro USB connector.
alcantor said:
Maybe you will be luckier... but be sure to use a OTG cable, the 4th pin (sense) must be grounded to the 5th pin (GND) on the micro USB connector.
Click to expand...
Click to collapse
did it but nothing changed
Hi I try to connect my usb mouse to my Xperia but I noticed that my cellphone not recognize my mouse so I tried another devices like card reader or pendrives and the cellphone do nothing. So theres someting that I have to do to make OTG working? I'm on the lastest official mm (note I never try OTG before, in lenovo K5 my OTG cable works)
tonyt. said:
Hi I try to connect my usb mouse to my Xperia but I noticed that my cellphone not recognize my mouse so I tried another devices like card reader or pendrives and the cellphone do nothing. So theres someting that I have to do to make OTG working? I'm on the lastest official mm (note I never try OTG before, in lenovo K5 my OTG cable works)
Click to expand...
Click to collapse
Q1:
Have you tried connecting your device to the computer via a USB cable? Can the computer recognize it?
If no, maybe there is problem with your USB port.
If yes, proceed to the next question.
Q2:
Have you tried changing the connectivity state for the USB port in Settings?
If not, try it out now.
If yes, report back and we'll discuss further more.
Use Es File Explorer... That's what I've been using
Sorry for late reply, I got it working, I replaced the usb cable, I think that the quality of the cable was too bad
Hello friends, I need help please, my tv box t95q which is one of the new ones in quotes, I installed several firmware to paret of yours that only failed me in wifi and I like them a lot and it turns out that I installed one of tanix x3 and between with the pc and the amlogic application and now the pc does not recognize me, the tv box or the system of installing via sd card does not turn on the blue light anymore and it does not give or image I have seen that there is a method making a small short with the tv Box disassembled but I saw it and it was another tv box and I don't know where I should do it in mine if you know something and can help me please I appreciate it very much
Ho, you would need to use mask rom mode, this will force your box to be detected in USB burntool, this is achieved by shorting 2 pins on the nand flash usally
Hi guys
I've just received Tanix TX9S android box and I'm trying to flash a custom rom but my computer doesn't detect the box. I'm using Win 10 Pro 64bit and I've tried reinstalling the burning tool, installing with driver signature off, restarting, changing usb ports on both the pc and the box but it just doesn't work. I'm using this cable: https://www.aliexpress.com/item/4000574237363.html
Any ideas?
kalehrl said:
Hi guys
I've just received Tanix TX9S android box and I'm trying to flash a custom rom but my computer doesn't detect the box. I'm using Win 10 Pro 64bit and I've tried reinstalling the burning tool, installing with driver signature off, restarting, changing usb ports on both the pc and the box but it just doesn't work. I'm using this cable: https://www.aliexpress.com/item/4000574237363.html
Any ideas?
Click to expand...
Click to collapse
Cable Looks Quite Thin, It Says IUts A Data Cable So Should Work Just Might Not Provide Enough Power, Try Connecting Power At Same Time, that may help, or you might have to use mask rom mode to force your box to be detected
I tried connecting power but to no avail. I don't think I will be opening the box so I'll have to live with stock ROM
kalehrl said:
I tried connecting power but to no avail. I don't think I will be opening the box so I'll have to live with stock ROM
Click to expand...
Click to collapse
Aww, something you should try, when you eventually upgrade and it becomes a spare device
Maybe I can try with an sd card.
I also have some logs in amlogic folder.
I've noticed 'NoDeviceConnected' error and sometimes 'Other device'.
kalehrl said:
Maybe I can try with an sd card.
I also have some logs in amlogic folder.
I've noticed 'NoDeviceConnected' error and sometimes 'Other device'.
Click to expand...
Click to collapse
Yhea SD Card Is Another Option, i Just Generally don't recommend This Method as if you flash a incompatible firmware and your device wont turn on then USB Burn Tool Will Be needed To Fix And Flash From a "Bricked" State
I managed to flash my box.
I used the latest burning tool v3.1.0. During the installation, I plugged my box into the computer and saw that it not only installed world cup drivers, but additional ones as well which was a good sign. I also had to use the power supply because usb didn't output enough power.
kalehrl said:
I managed to flash my box.
I used the latest burning tool v3.1.0. During the installation, I plugged my box into the computer and saw that it not only installed world cup drivers, but additional ones as well which was a good sign. I also had to use the power supply because usb didn't output enough power.
Click to expand...
Click to collapse
I have the same issues. At the moment that you plugged in your box with usb cable was your box already on power? en did you have to use the reset by toothpick reset at the time you plugged in?
BUZZTV XRS4900
Yes, already on power and I used a toothpick.
But flashing is hit and miss with amlogic burning tool.
Sometimes it works, sometimes doesn't.
Try a different computer because for one of my boxes I had to use a Windows 7 machine.
kalehrl said:
Yes, already on power and I used a toothpick.
But flashing is hit and miss with amlogic burning tool.
Sometimes it works, sometimes doesn't.
Try a different computer because for one of my boxes I had to use a Windows 7 machine.
Click to expand...
Click to collapse
Thank you.. I tried several options and cables and pc's.
When on power the toothpick doesn't work because it is already operational i guess
I try the mask rom method. Hope that will do the job
kalehrl said:
I managed to flash my box.
I used the latest burning tool v3.1.0. During the installation, I plugged my box into the computer and saw that it not only installed world cup drivers, but additional ones as well which was a good sign. I also had to use the power supply because usb didn't output enough power.
Click to expand...
Click to collapse
this doesn't sound like a good sign to me... world cup drivers !!??
I've yet to flash my box and I'm really put off by the fact that guides mention to ignore virus warnings and just to click OK. I haven't yet seen it uploaded onto xda either which makes me confident.
Try older versions of the Amlogic USB Burning Tool, newer versions might not work with older boxes.
You can find most of the versions here: Amlogic USB Burning Tool - All Versions
The problem was the cable. The Chinese one I bought first didn't work properly. The cheapest one from Amazon worked fine.
Same here mine to does not detect but i have noticed in device manager it appears an unknown device
Reinstall the driver.
EdT586 said:
Try older versions of the Amlogic USB Burning Tool, newer versions might not work with older boxes.
You can find most of the versions here: Amlogic USB Burning Tool - All Versions
Click to expand...
Click to collapse
thxy men, i tried use the latest version and don't work, after saw ur comment i can revive my tv boxes