SIM Number SetterSIM Number Setter is a small Xposed module that invokes normally unused Android System code to set the "subscriber number" on the device's SIM card. This is the number displayed in the system settings, and used in apps such as Google Messages, as well as being available to third party apps with sufficient permissions.
The number is not always set by carriers (leaving "Unknown"), or can be lost or invalid after porting a number to a different SIM.
This small app allows you to fix it, permanently, using a rooted device with Xposed.
If you don't have a rooted device, or don't want to root your main device, you may wish to consider rooting an old device, and temporarily putting your SIM into that device, using this app, and then putting it back in your main device - the fixed number will travel with it
There are some older Xposed modules that do similar things to this, but they are all abandoned and use methods that will no longer work with changes to the platform since then. This module should keep working regardless as it does not store the number locally at all, instead immediately invoking the change - allowing the app to be uninstalled after use too.
Important NoticeChanging the SIM number is semi-permanent: the number change will survive reboots, uninstalling this app, even switching the SIM to a different device, but can be changed again at any time using this app.
SIM Number Setter does NOT:
Change your actual phone number, no matter what you enter. You must contact your carrier if you wish to port your number or switch network.
Unblock a network blocked SIM.
Give you free data or calls.
Change your IMEI.
SIM Number Setter uses the built-in Android methods to write data to the SIM. The app nor the developer are not responsible for issues with the process, including any damage to the SIM or network issues.
Screenshots
DownloadDownload from the GitHub releases page
Source Code
GitHub
It works perfectly fine with LSposed too!!
Thanks a lot!
Ohh, FFS! If you have dual SIM, just switch them, change its number and switch them back! Not a big deal!
@Quinny899 Thanks for this! Is there a defined format in which the phone number should be entered? For example, +[Country Code][10 Digit Mobile Number], or 00[Country Code][10 Digit Mobile Number], something like that?
shadowstep said:
@Quinny899 Thanks for this! Is there a defined format in which the phone number should be entered? For example, +[Country Code][10 Digit Mobile Number], or 00[Country Code][10 Digit Mobile Number], something like that?
Click to expand...
Click to collapse
Anything should work, so long as it's 20 chars or less and uses only numbers or +
works perfectly as described, in case of dual SIM just temporarily change the position to SIM1
brenosnt said:
works perfectly as described, in case of dual SIM just temporarily change the position to SIM1
Click to expand...
Click to collapse
I concur! working wonderfully on Android 12 Beyond Rom (Note 20 Ultra)!!
Quinny899 said:
Anything should work, so long as it's 20 chars or less and uses only numbers or +
Click to expand...
Click to collapse
Doesn't work for me, unfortunately. Could be because of OxygenOS (read all the issues, open and closed, in your GitHub repository and checked everything) but I'm not sure. Thanks nonetheless!
rgavioli said:
It works perfectly fine with LSposed too!!
Click to expand...
Click to collapse
Can u help me, I'm getting failed to connect to the Xposed service.
Already have LSposed zygisk installed and I enabled module.
Running android 12
fardeenah said:
Can u help me, I'm getting failed to connect to the Xposed service.
Already have LSposed zygisk installed and I enabled module.
Running android 12
Click to expand...
Click to collapse
Which Android 12 firmware on what device?
Quinny899 said:
Which Android 12 firmware on what device?
Click to expand...
Click to collapse
Running AEX aospextended on redmi note 5 pro
fardeenah said:
Running AEX aospextended on redmi note 5 pro
Click to expand...
Click to collapse
There's a report on GitHub of someone with a phone that came with MIUI doing the same thing, I suspect there's something different on those devices. Not a lot I can do without having the device to debug, as the logs don't show anything.
F
Quinny899 said:
There's a report on GitHub of someone with a phone that came with MIUI doing the same thing, I suspect there's something different on those devices. Not a lot I can do without having the device to debug, as the logs don't show anything
Click to expand...
Click to collapse
I really wish I could change that sim number. Man....
Such a bummer.
Make sure the module is enabled on LSposed.
Also, make sure Phone services is selected at the module.
Reboot your device and try again.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
rgavioli said:
Make sure the module is enabled on LSposed.
Also, make sure Phone services is selected at the module.
Reboot your device and try again.
View attachment 5543693
Click to expand...
Click to collapse
I did but it's not working for me.. What device are you running btw? Are u using the latest version of LSposed
fardeenah said:
I did but it's not working for me.. What device are you running btw? Are u using the latest version of LSposed
Click to expand...
Click to collapse
I've tested on Samsung S20, Xiaomi Mi11i and it works fine.
LSposed 1.7.2 (6379)
You could try cleaning the data from this app.
Thank you for this. I just ported my Mobile Number to another network and got a unknown number on about phone.
Just a question. Is the write procedure single use?
Can you re-write the field if you transfer numbers, or misstype, or, or or?
AndStuff said:
Just a question. Is the write procedure single use?
Can you re-write the field if you transfer numbers, or misstype, or, or or?
Click to expand...
Click to collapse
You can rewrite it as many times as you like, though I'd recommend trying to keep usage low as I doubt SIMs are designed for this data to be rewritten often. If you make a typo you can fix it though.
Related
TD Fuzzer
This is a simple Xposed module designed to help those that utilize Nitrodesk's Touchdown to connect to their Exchange Activesync systems. Some EAS implementations prohibit certain device types/models from connecting, or if you'd rather present an alternate device when provisioning, this module can help with that. Keep in mind, if your IT staff/Info Security Office discover that you're circumventing their security controls and/or policies, I can't be held accountable if you get reprimanded and/or fired. This module won't circumvent specific policy requirements, such as device or sdcard encryption, strong password requirements, or disabled feature sets (disable IR, disable BT, etc). All it does is replace device-specific information that is collected during device provisioning, and also during each Activesync session (User-Agent header).
A picture is worth a thousand words, or so the saying goes:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The device on the top is my HTC One (m7) running Touchdown 8.4.00082 on KK 4.4.2, and the one beneath it is an actual iPhone 5s. The only discernible difference is the Device ID (which can't easily be changed in TD without breaking stuff).
This module should work on most devices running most ROMs. It only hooks the Touchdown package, and has been tested on TD 8.1.x, 8.4.x, and the latest 8.5.00086 against Exchange 2010 SP1 (Activesync v14.1) and Office 365 (Exchange 2013).
Install/Configuration
Install Xposed Framework
Activate Xposed app_process
Install this module and enable in Xposed Installer
Open TD Fuzzer settings and configure options
Reboot or soft-reset
Open Touchdown and provision device (or if already provisioned, go to TD Settings, Connection, ActiveSync button, Refresh ActiveSync Settings)
Source
You can find it on my github
Alternate Install
Also available in the xposed repo
@cities516 can you add to your module index?
Until I get around to adding some device presets into the module, here are some examples straight out of OWA:
iPhone 4S
Phone friendly name: Black iPhone 4S
Device Model: iPhone4C1
Phone OS: iOS 7.0.4 11B554a
Device Operating System Language: en
User agent: Apple-iPhone4C1/1102.55400001
SAMSUNG SGH-I747 (AT&T GS3)
Phone friendly name: d2uc
Device Model: SAMSUNG-SGH-I747
Phone OS: Android
Device Operating System Language: English
User agent: SAMSUNG-SGH-I747/101.403
SAMSUNG SGH-I317 (AT&T GN2)
Phone friendly name: t0lteatt
Device Model: SAMSUNG-SGH-I317
Phone OS: Android
Device Operating System Language: English
User agent: SAMSUNG-SGH-I317/100.40102
Great Work!
I've been search for a solution for this for ages and must I say that your xposed module is by far the only and most effective solution. Big congrats and very much obliged, man.
Because without this, although Touchdown can spoof a device name, the OS, protocols during the Activesync provisioning process will still be "Android 4.4.x" and "Touchdown x.x.x". So from the admin's side, it is still able to identify the spoofing by looking at the OWA mobile log.
Three questions:
1. How does it work? Modifying provisioning communication packets between Touchdown and ActiveSync server? I'm asking this because I want to know if future versions of Touchdown can be supported.
2. Will you consider supporting Android 5.0?
3. Will you consider supporting AOSP email apps, (preferably the apks with Exchange Security byPass working for 4.4.4 and 5.0)
Again, many thanks to you for the great work!:laugh:
XDAAdvocate said:
1. How does it work? Modifying provisioning communication packets between Touchdown and ActiveSync server? I'm asking this because I want to know if future versions of Touchdown can be supported.
Click to expand...
Click to collapse
I've replaced the writeDeviceInfo() method, which builds the provisioning XML object (com.nitrodesk.wbxml.WBXMLSerializer object, to be precise). This should be compatible with any version of TD; it's more specific to the Activesync protocol version (14.1 in this case). If MS changes how devices send provisioning data, then it would have to be updated. Also, there's information that's passed to EAS in the User-Agent header, which this module replaces.
2. Will you consider supporting Android 5.0?
Click to expand...
Click to collapse
Sure, once I have a device running Android L and the Xposed Framework.
3. Will you consider supporting AOSP email apps, (preferably the apks with Exchange Security byPass working for 4.4.4 and 5.0)
Click to expand...
Click to collapse
I've run across at least one xposed module out there that bypasses the AOSP email security restrictions for EAS. Since I don't normally run AOSP roms, it's much harder for me to do any sort of debugging/dev work.
agentdr8 said:
......
I've run across at least one xposed module out there that bypasses the AOSP email security restrictions for EAS. Since I don't normally run AOSP roms, it's much harder for me to do any sort of debugging/dev work.
Click to expand...
Click to collapse
Can you tell me where to find the modules to bypass these security restrictions for EAS. There are indeed some modules to bypass the mandatory PIN for example. But no module to bypass and change the device provisioning data.
This is what I needed thanks will try and report
yooidje said:
Can you tell me where to find the modules to bypass these security restrictions for EAS. There are indeed some modules to bypass the mandatory PIN for example. But no module to bypass and change the device provisioning data.
Click to expand...
Click to collapse
You're right; I don't think any of the ones I've seen can modify the device provisioning data, only bypass the PIN/lockscreen restrictions.
agentdr8 said:
You're right; I don't think any of the ones I've seen can modify the device provisioning data, only bypass the PIN/lockscreen restrictions.
Click to expand...
Click to collapse
Is there any possibility that you can also support the AOSP email apps, perhaps?
**please :angel:
yooidje said:
Is there any possibility that you can also support the AOSP email apps, perhaps?
**please :angel:
Click to expand...
Click to collapse
If I have some free time I'll see what I can do on my TF700 running CM11.
agentdr8 said:
If I have some free time I'll see what I can do on my TF700 running CM11.
Click to expand...
Click to collapse
:victory: I am more than willing to test any developments
In case anyone is wondering, this module still works on LP with the latest Xposed Framework.
Still working on the latest Xposed Framework for Marshmallow. Also tested against O365, and works just fine.
agentdr8 said:
Still working on the latest Xposed Framework for Marshmallow. Also tested against O365, and works just fine.
Click to expand...
Click to collapse
Hi, can you confirm if this works with the latest version of touchdown available currently, 8.5?
randallstevens said:
Hi, can you confirm if this works with the latest version of touchdown available currently, 8.5?
Click to expand...
Click to collapse
Yes indeed. I'm running 8.5.00086 with the module just fine. I'll update the OP.
EDIT: Looks like I had already updated the OP with that info. [emoji3]
Advanced Data Plan - data usage cycle advanced editor
Status: Beta
Change Data Usage Cycle date range
Calibrate Android stock Data Usage Summary with your mobile plan
Check your data usage without 3-party Apps
Set Daily or Weekly mobile data plan
Set Data Plan specifying a custom duration in days
Screenshot
https://github.com/m0m4x/AdvDataPlan#screenshot
Download
from URLXposed Repo or Github
Source Code
https://github.com/m0m4x/AdvDataPlan
Tested with
* Cm or Aosp based roms
* TouchWiz roms
XDA:DevDB Information
Advanced Data Plan, Xposed for all devices (see above for details)
Contributors
m0m4x
Source Code: https://github.com/m0m4x/AdvDataPlan
Xposed Package Name: net.m0m4x.android.xposed.advdataplan
Version Information
Status: Beta
Current Beta Version: 1.0.6
Beta Release Date: 2017-08-06
Created 2017-07-09
Last Updated 2018-07-05
I could not install. It gave the installer error. Galaxy S5 stock Marshmallow.
Installation error on Sony Z3+ with stock 6.0.1
Its not installing on galaxy tab A sm-p555
jackson_c said:
I could not install. It gave the installer error. Galaxy S5 stock Marshmallow.
Click to expand...
Click to collapse
waseemakhtar said:
Installation error on Sony Z3+ with stock 6.0.1
Click to expand...
Click to collapse
osygen said:
Its not installing on galaxy tab A sm-p555
Click to expand...
Click to collapse
Updated apk. I had some issue signing the previous build..
Can u retry?
m0m4x said:
Updated apk. I had some issue signing the previous build..
Can u retry?
Click to expand...
Click to collapse
It installed. ?
But how it works, how can I set the cycle, or how can I activate? Should work with Samsung touchwiz?
Tested and working on Lineage OS 13 Build 2017.05.17 on Redmi Note 4.
It should work on cm or aosp based rom without any issue.
Good job bro.
Sent from my Redmi Note 4 using Tapatalk
Can you also add a feature for the data to bring forward to next month cycle, ie top up data?
jackson_c said:
It installed. ?
But how it works, how can I set the cycle, or how can I activate? Should work with Samsung touchwiz?
Click to expand...
Click to collapse
This module works on top of the standard Android functions. To change the data cycle you need to go in Settings - Data Usage and tap on the dropdown where you can choose to see data usage of previous months: at the end of the list should be the "Change cycle" option.
The Stock functions of Android allow only montly cycle, but most of my data plan is weekly or 30days. So this module add the possibility to set the duration of your Data plan in days.
I can't test it on TouchWiz but it should work.
If the option "Chang cycle" is missing try to enable mobile data and turn off WiFi.
Let me know. :fingers-crossed:
Nice module. Thanks for the hard work. My issue is seen in the screenshot. When I click on the data toggle it shows me 0kb and a date from 1969.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When I click on more settings everything looks fine.
OnePlus 3T running sultans CM13
954wrecker said:
Nice module. Thanks for the hard work. My issue is seen in the screenshot. When I click on the data toggle it shows me 0kb and a date from 1969.
When I click on more settings everything looks fine.
OnePlus 3T running sultans CM13
Click to expand...
Click to collapse
True. I'm working on it.
Hope this will be resolved with the next update!
Maybe today or tomorrow.. :good:
954wrecker said:
Nice module. Thanks for the hard work. My issue is seen in the screenshot. When I click on the data toggle it shows me 0kb and a date from 1969.
Click to expand...
Click to collapse
Yes I'm facing same issue on my device too. Just noticed.
Sent from my Redmi Note 4 using Tapatalk
m0m4x said:
This module works on top of the standard Android functions. To change the data cycle you need to go in Settings - Data Usage and tap on the dropdown where you can choose to see data usage of previous months: at the end of the list should be the "Change cycle" option.
The Stock functions of Android allow only montly cycle, but most of my data plan is weekly or 30days. So this module add the possibility to set the duration of your Data plan in days.
I can't test it on TouchWiz but it should work.
If the option "Chang cycle" is missing try to enable mobile data and turn off WiFi.
Let me know. :fingers-crossed:
Click to expand...
Click to collapse
Im getting settings force close when try "change cycle" option, with TouchWiz.
Could set this options in a own module interface?
5566^ said:
Can you also add a feature for the data to bring forward to next month cycle, ie top up data?
Click to expand...
Click to collapse
Ok, maybe in the next version. At the moment i prefer to maintain the things easy, to keep as much as possible the stock functions.
If you want to accelerate you can fork my github repository
954wrecker said:
Nice module. Thanks for the hard work. My issue is seen in the screenshot. When I click on the data toggle it shows me 0kb and a date from 1969.
When I click on more settings everything looks fine.
OnePlus 3T running sultans CM13
Click to expand...
Click to collapse
noobpremium said:
Yes I'm facing same issue on my device too. Just noticed.
Sent from my Redmi Note 4 using Tapatalk
Click to expand...
Click to collapse
Fixed now. You should find an update in the Xposed Installer.
bye
Good job it looks perfect now.
When I uninstalled the module my 0kb 1969 issue pops back up. Do you know how I can fix that?
954wrecker said:
When I uninstalled the module my 0kb 1969 issue pops back up. Do you know how I can fix that?
Click to expand...
Click to collapse
Could you try to set the cycle start day again, after you uninstall the module?
jackson_c said:
Im getting settings force close when try "change cycle" option, with TouchWiz.
Could set this options in a own module interface?
Click to expand...
Click to collapse
I need to find a TouchWiz phone to test the module..
Can u provide me with the logcat of the error?
Please take a look here if u need to know how to grab the logcat.:
https://forum.xda-developers.com/showthread.php?t=1726238
Thanks a lot.
m0m4x said:
I need to find a TouchWiz phone to test the module..
Can u provide me with the logcat of the error?
Please take a look here if u need to know how to grab the logcat.:
https://forum.xda-developers.com/showthread.php?t=1726238
Thanks a lot.
Click to expand...
Click to collapse
Thanks for answer my request. I'm trying to send the file.
Ever wanted 5G or 5Ge?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
With MobileIconChanger you can replace any mobile data icon with any other, whether from your system, from older android versions or even some custom ones!
With a simple and powerful UI you can easily manage everything!
You can use it to just replace 4G with LTE, because they are basically the same but LTE looks cooler, or place 6G in there to prank your friends.
Read this for a bit insight on why this exists
For compatibility, installation and usage instructions and downloads head over to the GitHub Repo.
This mod is currently listed in the LSPosed Modules Repo and the Xposed Modules Repo.
(Sorry I don't want to keep 4 different places up to date)
If you enjoy this mod, hit thanks, give the GitHub Repo a star and tell your friends about it.
Feedback is welcome.
reserved
He found no icons. Xperia 5 II android 10 root
I have restart 4 Times. EdXposed v93.0
Bellitsch89 said:
He found no icons. Xperia 5 II android 10 root
I have restart 4 Times. EdXposed v93.0
Click to expand...
Click to collapse
have you enabled the module for "SystemUI"? also check that its selected in whitelist mode or not selected in blacklist mode. it can't find icons if systemui is not hooked properly
Okay press on Restart SystemUI and after the restart is done, force-close the module and after that open up the settings again.
if it still happens can you get a logcat?
also can you send a screenshot of the normal icons when connected to mobile data? maybe sony has done some stuff to the os and changed the way the icons work
duplicate answer by accident - plz ignore
I hope this is what you want
I have made All what you said nothing works
Bellitsch89 said:
I hope this is what you want
I have made All what you said nothing works
Click to expand...
Click to collapse
What you sent is the XPosed Log, not an actual logcat.
I can't reproduce your issue, my EdXposed does work after some fiddling.
Please message me on XXXXXX then we can investigate together.
Mod Edit: Link removed
programminghoch10 said:
What you sent is the XPosed Log, not an actual logcat.
I can't reproduce your issue, my EdXposed does work after some fiddling.
Please message me on XXXXXX then we can investigate together.
Mod Edit: Link removed
Click to expand...
Click to collapse
Support for the app has to happen here on XDA. There is no need to call users to other sites. Please read THIS.
Alright @Bellitsch89,
please disable all other modules, disable the activation scope for MobileIconChanger, make screenshots of the EdXposed settings, so that i may reproduce the situation and capture a proper logcat.
Module working perfectly.
Request: If possible, add feature to use Old/small signal style.
GoodyOG said:
Module working perfectly.
Request: If possible, add feature to use Old/small signal style.
Click to expand...
Click to collapse
Just select icons from category Jellybean/Lollipop as replacements.
But as the mobile data indicator is still an extra icon, it will just be a bit smaller than the original icon and it will not be merged on top of the signal strength indicator.
programminghoch10 said:
Ever wanted 5G or 5Ge?
View attachment 5348397
With MobileIconChanger you can replace any mobile data icon with any other, whether from your system, from older android versions or even some custom ones!
View attachment 5346769View attachment 5348399View attachment 5348405View attachment 5348403
With a simple and powerful UI you can easily manage everything!
View attachment 5346773View attachment 5346775
You can use it to just replace 4G with LTE, because they are basically the same but LTE looks cooler, or place 6G in there to prank your friends.
Read this for a bit insight on why this exists
For compatibility, installation and usage instructions and downloads head over to the GitHub Repo.
This mod is currently listed in the LSPosed Modules Repo and the Xposed Modules Repo.
(Sorry I don't want to keep 4 different places up to date)
If you enjoy this mod, hit thanks, give the GitHub Repo a star and tell your friends about it.
Feedback is welcome.
Click to expand...
Click to collapse
I try to download from edexposed repo and it fails almost instantly..I get an error..am I the only one experiencing this?
Screenshot_20210626-212040_EdXposed Manager.png
drive.google.com
There's screenshot with error toast
allday5850 said:
I try to download from edexposed repo and it fails almost instantly..I get an error..am I the only one experiencing this?
Click to expand...
Click to collapse
thanks for informing me, it seems I've done a mistake uploading the module which now can only fixed by the mods. I've sent them a message. Until then just download it from the GitHub Releases and tell me if it works.
Doesn't work for me, not replacing anything.
Oneplus 7 with Android 11, Oxygen OS 11.0.1.1. LSPosed 1.4.5, Ressource Hooks enabled. Rebooted also after applying the icon changes.
XlAfbk said:
Doesn't work for me, not replacing anything.
Oneplus 7 with Android 11, Oxygen OS 11.0.1.1. LSPosed 1.4.5, Ressource Hooks enabled. Rebooted also after applying the icon changes.
Click to expand...
Click to collapse
Hello, this is because your system (OxygenOS) does not use the icons you changed.
See how your icon in the statusbar is very small and has activity indicators? compare that to aosp screenshots I've included. Same thing happens on Samsung OneUI.
I see on your screenshot a tiny 5G icon, it looks like that might be used by the system at some point because it visually would fit into the design of the statusbar icon on the screenshot.
If you want more precise feedback about the situation on your device, i need a logcat captured while restarting systemui.
Also it would be nice if you could send me your systems SystemUI.apk so I can analyze it for how the icons are saved on your system.
I have opened an issue on github page, I hope there is all the information you need, if you want I can explain my issue here, I am not sure where would you like the feedback and troubleshooting to be either here or github, or both, thanks in advance!!
hi
unfortunately No icons found! message
restarted many times but no effect.
Xiaomi Mi A2 Lite / Android One 10 Rom / LSPosed 1.4.5 (systemui checked) / Magisk 23
Just tried on my Pixel 5, just says to restart because no icons found. Logcat attached. I've tried disabling all other modules and restarting several times.
BlueHairMinerBoy said:
Just tried on my Pixel 5, just says to restart because no icons found. Logcat attached. I've tried disabling all other modules and restarting several times.
Click to expand...
Click to collapse
I think you forgot to attach the logcat
In the Xperia user group in
cafe.naver.com/x1smart
I'm HTCMAGE.
Last year, Xperia 1II.
How to activate VoLTE.
After the guide version,
VOLTE Success, Activation without Firmware Replacement (Sony Mobile withdrawal area)
Hello Xperia users! In the meantime, I finally solved the VOLTE problem! I approached Qualcomm's diagnostic port-active-efsExplorer and solved the problem by inserting a VOLTE profile from my carrier :) Sorry, this is Korea and I am Korean...
forum.xda-developers.com
5II and...
Xperia's 1III/5III products.
Activating VoLTE and...
"Root".
I'll share how to turn it off.
I am not good at English.
I use the translator.
Please understand.
https://developer.sony.com/develop/open-devices/get-started/unlock-bootloader
Later, to unlock.
Maejiseukeu manager app.
Patch. magiskFiles img
While connected to your computer with a usb
You can use the instructions below at least adb.
adb reboot bootloader && fastboot flash boot "magisk.img" && fastboot reboot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then, you can install it.
It's going to rebooted.
This is the restart screen. It's connected to USB.
Always allow debugging when enabled.
Connect to Wi-Fi and do not log in.
Please move on quickly.
Turn off the internet quickly (Mobile data X)
Save the magisk manager app on your computer.
Then go to Xperia and install it.
github.com/topjohnwu/Magisk/releases/tag/v23.0
Please make sure the Internet is turned off.
I'll carry it out. Magisk Manager in the upper right corner.
Cogwheel - Setting page - Middle.
Activate "Hide".
When it's done, we'll start the VoLTE patch.
At least ADB.
Adb shell.
Enter and enter.
su
If you type it in,
In the same window as the picture below,
If you allow it,
The shape of the dollar...
It changes to #.
setprop persist.usb.eng 1
Enter and enter.
It's from My Computer Properties Device Manager.
There are several floating yellow exclamation marks.
Drive manually.
Please hold it.
Among the yellow exclamation points,
We don't know which part is connected.
Please select a few targets and update them manually.
Update Driver - Browse to My Computer
Directly select the list available on your computer.
Port-QUALCOM 9081 choice.
Starting with the ELS Explorer selection LAHA (based on 1 III).
This is something that can go in. If you connect...
Please copy and paste the EBS file.
(Use the mouse to pull it in and put it in twice.)
I'll make a folder that doesn't exist.
Put it in twice.
Policyman folder delete the existing one.
You can put it in and the NV at the top...
Likewise, place it at the top.
Close the window when done.
adb shell su -c setprop persist.dbg.volte_avail_ovr 1
adb shell su -c setprop persist.dbg.vt_avail_ovr 1
And then "adb reboot".
If you type Enter, we'll reboot you.
On the basic Soonjung phone app,
Check IMS status in *#*#4636#*
If it's available, it's good.
Wi-Fi or data on.
Log in various ways. Google, Sony accounts,
Update the Play Store and...
Various basic apps (Netflix)
Update everything.
And information on the bottom of the Play Store,
It should say play protection certification.
If you run the magisk manager app,
If you check out the following,
I reboot on my own.
Reboot and run the manager app again.
Please press "Remove the Magisk".
Completely removed.
Then I'll start deleting and reboot on my own.
Delete completed.
Finished.
It's easy to use.
Netflix is also on PlayStore.
It'll be updated normally.
root
If you maintain the route,
I change my font or record on the phone.
When you do the whole gesture, remove the bottom white stick.
That's one of the advantages.
You can choose Xperia.
The users can choose.
https://forum.xda-developers.com/t/...-mobile-withdrawal-area.4144701/post-83277123
In the old guide version,
My English skills that I'm not good at...
This person translated it.
Please keep in mind.
The EBS file (VoLTE file) is...
It's in Sony firmware.
In the country you're using,
All the mobile carrier files are in here.
You can use that.
It's in the policy man folder.
You must modify the XML file!
In the area that was withdrawn,
I don't have a mobile carrier band code.
Make sure to change it to a notepad.
If you change the XML file,
VoLTE, of course.
5G works normally, too.
My poor English skills...
Someone wise.
Please deliver it.
We wish.
Be happy always.
How can I get the efs file?
/system/vendor/firmware_mnt/image/modem_pr/mcfg/configs/mcfg_sw/generic
It's in the firmware or on the device
So you can either unlock BL & root to have VoLTE, VoWiFi, etc; or keep everything untouched to have Widewine DRM (Netflix HD etc), full camera filter support, etc?
There is just no middle ground, is there :-/
GOOD JOP
How about WiFi calling?
Hazzay88 said:
How about WiFi calling?
Click to expand...
Click to collapse
disabled by Sony
malikin said:
disabled by Sony
Click to expand...
Click to collapse
That's annoying that WiFi calling is disabled.
I hope Sony fix volte issues globally for the upcoming Xperia 1 IV. All other manufacturers such as Xiaomi don't have this issue even if it's a grey import. I don't see why Sony can't fix the problem
Hazzay88 said:
That's annoying that WiFi calling is disabled.
I hope Sony fix volte issues globally for the upcoming Xperia 1 IV. All other manufacturers such as Xiaomi don't have this issue even if it's a grey import. I don't see why Sony can't fix the problem
Click to expand...
Click to collapse
I think nothing will change.
Bofahad said:
I think nothing will change.
Click to expand...
Click to collapse
I will basically stop buying a Sony phone as simple as that.
Hazzay88 said:
I will basically stop buying a Sony phone as simple as that.
Click to expand...
Click to collapse
U can do like what i did (5G)
Bofahad said:
U can do like what i did (5G)
Click to expand...
Click to collapse
Battery consumption is higher with 5G.
What benefits do you get with 5G besides speed?
Hazzay88 said:
Battery consumption is higher with 5G.
What benefits do you get with 5G besides speed?
Click to expand...
Click to collapse
I am happy with 4G as it is more than enough for my general usage.
What I want Sony to basically fix is volte and WiFi calling as that is a deal breaker considering 3G network will be phased out.
If Sony don't fix volte issue then certain countries will not be able to buy the upcoming Xperia phones as it will no longer be able to make calls.
Hazzay88 said:
I am happy with 4G as it is more than enough for my general usage.
What I want Sony to basically fix is volte and WiFi calling as that is a deal breaker considering 3G network will be phased out.
If Sony don't fix volte issue then certain countries will not be able to buy the upcoming Xperia phones as it will no longer be able to make calls.
Click to expand...
Click to collapse
You can enable VoLTE by flashing SEA firmware without unlocking bootloader.
Bofahad said:
You can enable VoLTE by flashing SEA firmware without unlocking bootloader.
Click to expand...
Click to collapse
Yes I have volte working by flashing SEA firmware. Working in Australia on Vodafone only for the Xperia 1 II.
However I haven't heard anyone getting it to work on the current generation Xperia 1 III so that puts further Doubt on the upcoming Xperia 1 IV which would be enough to keep me away and look elsewhere instead. It's not possible to make calls it volte doesn't work and 3G network is shut down
Hazzay88 said:
Yes I have volte working by flashing SEA firmware. Working in Australia on Vodafone only for the Xperia 1 II.
However I haven't heard anyone getting it to work on the current generation Xperia 1 III so that puts further Doubt on the upcoming Xperia 1 IV which would be enough to keep me away and look elsewhere instead. It's not possible to make calls it volte doesn't work and 3G network is shut down
Click to expand...
Click to collapse
It's working with me.
Bofahad said:
It's working with me.
Click to expand...
Click to collapse
That's good to hear.
Which country and carrier are you with?
Also did you get it to work after flashing it with SEA firmware to get it to work
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MACsposedHistorically, setting a custom MAC address on Android was very easy for rooted users. Starting with Android 12, however, Google's implementation of MAC address randomization has made it impossible, as the MAC address is always changed when the network state is altered. If you have encountered this problem, then you need MACsposed! MACsposed is an Xposed module that blocks the MAC address randomizer on Android 12 and 13 and allows you to once again make use of your favorite tools for setting your MAC address. Simply install MACsposed, enable it, and go back to randomizing your MAC address using your favorite tools for doing so!
WARNING: MACsposed is intended for rooted devices running Android 12 or 13 and requires Xposed. The recommended Xposed variant to use is LSPosed. Other Xposed variants may work, but have not been tested. Additionally, this module cannot be guaranteed to work on all devices. In the worst case, it can cause a bootloop. Use at your own risk.
To use MACsposed:
Install LSposed. This requires your device to be rooted with Magisk. Installation instructions for LSPosed are available here.
Install MACsposed.
Activate the MACsposed module in the LSposed user interface.
Reboot your device and sign in.
Open the quick settings panel. The MACsposed tile will appear.
Toggle the MACsposed tile on or off to enable or disable it.
Use your favorite tool for setting a custom MAC address!
MACsposed is now open source on GitHub! - https://github.com/DavidBerdik/MACsposed
Reserved.
Reserved.
Does this work on Android 10?
I owned a Xiaomi Redmi 9 running Android 10
Ace_Cole said:
Does this work on Android 10?
I owned a Xiaomi Redmi 9 running Android 10
Click to expand...
Click to collapse
The changes that Google made to prevent setting custom MAC addresses from working were only introduced with Android 12, so this app is actually not necessary if you are on Android 10.
Is it working with the last version of Lineageos?
m3m0rx said:
Is it working with the last version of Lineageos?
Click to expand...
Click to collapse
I have not tested this app on LineageOS 19, so I cannot say for sure that it will work, but since LineageOS 19 is based on Android 12, I believe that it probably will work. If you decide to try it, please let me know what your experience is like!
David B. said:
I have not tested this app on LineageOS 19, so I cannot say for sure that it will work, but since LineageOS 19 is based on Android 12, I believe that it probably will work. If you decide to try it, please let me know what your experience is like!
Click to expand...
Click to collapse
I am happy to let you know that I am writtimg on a changed MAC. It is working on Lineage 19-20220720-NIGHTLY-beyond2lte, G975F. The thing is that I had to switch to the Mac app I saw in your pictures, mine did not work.
m3m0rx said:
I am happy to let you know that I am writtimg on a changed MAC. It is working on Lineage 19-20220720-NIGHTLY-beyond2lte, G975F. The thing is that I had to switch to the Mac app I saw in your pictures, mine did not work.
Click to expand...
Click to collapse
That's great! I'm happy to hear that! Thank you for letting me know.
As for the app you used for changing the MAC address, I have found from my own experimenting that many of the MAC address changer apps that are available out there tend to be rather hit-or-miss in terms of how well they operate. Some of them were built for older versions of Android and haven't been updated in a really long time, and so, they were broken even before Android 12. Either way, I'm very happy to hear that it works for you!
MACsposed v1.1.0 with support for Android 13 is now available to download on GitHub. As of this posting, the update is still pending approval on the Google Play Store.
Hello! Can I tweak the module to run on Android 11? Tired of fighting! Wi-Fi is disabled in the settings and disabled in the developer menu. But the dastardly Techno Spark 7 still plays with the MAC.
AndryK111 said:
Hello! Can I tweak the module to run on Android 11? Tired of fighting! Wi-Fi is disabled in the settings and disabled in the developer menu. But the dastardly Techno Spark 7 still plays with the MAC.
Click to expand...
Click to collapse
Certainly! If you get it working, please consider submitting a pull request so I can expand the range of supported devices.
I should warn you that if your phone OEM has tweaked the Android code enough to randomize MAC addresses, it may not be easy to implement the change, as they've likely deviated from AOSP.
The current version just didn't start.
AndryK111 said:
The current version just didn't start.
Click to expand...
Click to collapse
Well the current version is only intended for Android 12 and 13, so I'm not surprised to hear that. If you're lucky, you may be able to get it working by just dropping the minimum SDK version, but honestly, I doubt it. Might be worth trying though.
I do not know how to do it.
offtopic ..... can some read-only file be marked?
AndryK111 said:
I do not know how to do it.
Click to expand...
Click to collapse
Do what? Modify the code?
AndryK111 said:
offtopic ..... can some read-only file be marked?
Click to expand...
Click to collapse
I don't understand the question.
David B. said:
Do what? Modify the code?
I don't understand the question.
Click to expand...
Click to collapse
David B. said:
If you're lucky, you may be able to get it working by just dropping the minimum SDK version
Click to expand...
Click to collapse
I don't know how to reset the minimum version of sdk
AndryK111 said:
I don't know how to reset the minimum version of sdk
Click to expand...
Click to collapse
Oh that's actually pretty easy to do!
Change minSdk 31 to minSdk 30 here: https://github.com/DavidBerdik/MACsposed/blob/master/app/build.gradle#L11
David B. said:
Oh that's actually pretty easy to do!
Change minSdk 31 to minSdk 30 here: https://github.com/DavidBerdik/MACsposed/blob/master/app/build.gradle#L11
Click to expand...
Click to collapse
go to https://github.com/DavidBerdik/MACsposed
"code" => Download ZIP => edit file => what's next? just rename Zip to APK?