Related
my i9100G cant transfer file to my pc.. when i connect the usb, my computer said fail to install and cant do anything about it.. i even tried open kies also cant detect the phone.. i did everything like untick/tick usb debug.. and my phone is DZKJ2 firmware 2.3.6.. any solution? before this i tried to root my phone but i mess something up so i quited it.. is this the cause for this problem?
Try installing the latest samsung kies available. It will come with the required drivers. What OS are you using ?
bala_gamer said:
Try installing the latest samsung kies available. It will come with the required drivers. What OS are you using ?
Click to expand...
Click to collapse
i'm using window 7..
You said that you tried to root but quit.Hope you didnt try to root with a i9100 kernel on your i9100G cos i dont think they are compatible.Re-install the latest version of kies and if that doesnt work then re-flash your firmware and try again.
well... I have this problem before, me just trying using other port the problem was sloved... (tips: do you unlock you phone before connet to pc?)
Other answer from other forum
Fist:
I) restart you pc,
II) on you kies
III) turn off you phone
IV) connect to pc
V) got driver now?
if still cannot.. try
a) wipe data and cache on recovery mode,reboot and try connet to pc agian. (warning: make sure backup you phone fist)
Hope this will helping you xD
by the way.. i did tried to root my phone.. but end up failed.. so i cant do stuff like flashing.. those rooting step for is was too hard for me to understood..
To fix this problem (Your Windows 7 PC Not recognizing your Galaxy S2)
1: Try another USB Cable (my original cable doesn't work, a generic one I had does)
2: My Computer Properties - Device Manager - Uninstall EVERYTHING from the Universal Serial Bus controllers list, then restart. - This fixed the issue for me, my external keyboard and mouse stopped working but I'm using a laptop and once I restarted everything works fine
3: Update your phone's baseband radio (I was on XXKI1 and my PC would only recognize my phone when I was using VillainROM, nothing else, until I updated the radio to XXKI4).
jamesyb0i said:
To fix this problem (Your Windows 7 PC Not recognizing your Galaxy S2)
1: Try another USB Cable (my original cable doesn't work, a generic one I had does)
2: My Computer Properties - Device Manager - Uninstall EVERYTHING from the Universal Serial Bus controllers list, then restart. - This fixed the issue for me, my external keyboard and mouse stopped working but I'm using a laptop and once I restarted everything works fine
3: Update your phone's baseband radio (I was on XXKI1 and my PC would only recognize my phone when I was using VillainROM, nothing else, until I updated the radio to XXKI4).
Click to expand...
Click to collapse
tried too but isn't really working..
What root method did you try?
I think you can try by type
*#9090# and select "via UART"
then type
*#7284# and select "UART MODEM" and "USB PDA"
Connect your USB cable and it will auto download the new driver to your computer.
p/s: Need internet connection
sorry all.. finally fix the usb thingy.. i think the problem started with the update i download from samsung.. after i download the DZKJ2 firmware.. my pc unable to detect my phone.. now i switched back to DZKJ1 firmware and now its fixed.. though some function may lost but better than nothing.. thanks for your answer too
AndroidS2 said:
I think you can try by type
*#9090# and select "via UART"
then type
*#7284# and select "UART MODEM" and "USB PDA"
Connect your USB cable and it will auto download the new driver to your computer.
p/s: Need internet connection
Click to expand...
Click to collapse
thanks..ur guide is awesome. works like charm 4 me. no need to downgrade to kj1..flawlessly!
mr.haqeem said:
thanks..ur guide is awesome. works like charm 4 me. no need to downgrade to kj1..flawlessly!
Click to expand...
Click to collapse
still not work for me...
Do a factory reset through privacy option in settings.It will solve usb detection issues completely.I suffered same problem and solved by factory reset. Hope this helps those with similar experiences
Morning all.
As of yesterday, my S2 won't connect to any pc in mass storage mode.
At first it connected as it should, but after about 5 minutes - before I'd transferred anything - I got a message that windows couldn't recognise the device/driver installation unsuccessful.
Since then I get this message immediately, have tried 4 different pcs.
Would seem the USB drivers are FUBAR somehow, but MTP via Kies works, as does Odin.
I've tried a full factory reset/reinstall, previous backups - stock and custom - removed, reinstalled and updated Kies, cleaned the USB port on the phone - nothing doing. Have tried stock kernels, Siyah, Nimphetamine - nothing. Currently on XWKL1, custom ROM (krinyo's SlimROM) with Siyah 2.6.3+
Also tried uninstalling various USB ports on my home pc, but stopped when I discovered it was the same on all pcs.
It's not the end of the world - I have bluetooth and my microSD - but it's a PITA and I'm out of ideas.
Many thanks for any help/suggestions.
Have you cheched if USB Debugging is enabled or not?
AzureusPT said:
Have you cheched if USB Debugging is enabled or not?
Click to expand...
Click to collapse
Yes, forgot to add that, sorry. Tried with and without, no difference.
Tried changing the usb cable?
From another post
Dear All
Following are my observations and possible steps to
1. When the phone is upgraded to Android 2.3.4 and above (mine is 2.3.6) Kies stops recognizing the phones and USB connection / Serial port connections etc get reset on the phone
2. Even if proper drivers are there on the laptop (mine is Windows 7 64bit) they are not recognized
3. Device Manager shows "unknown device"
4. Updating the driver also does not result in any help
5. solution lies in the phone
a. key in the dialer *#7284#
b. it has 4 option there..
UART (MODEM/PDA)
USB (MODEM/PDA)
c. For USB. select the PDA.if it already selected to PDA. reselect it by select MODEM and then PDA again.. Only change the USB setting.. andthen press back. try reconnect (thanks to napi1 @ androidforums.com/samsung-galaxy-s2-international/447145-sgs2-kies-not-syncing-os-2-3-5-a.html#post3484588)
6. The Laptop will start recognizing the required drivers and install them
also
Click to expand...
Click to collapse
Maybe this can help
Getting a Service Mode FC when I enter that code in the keypad.
Will try it with an older backup.
Edit - tried it with a backup of CheckROM , 2.3.6. No FC, PDA already selected. Tried 5c above, still no good - unknown device on pc..
Lennyz1988 said:
Tried changing the usb cable?
Click to expand...
Click to collapse
No. Can't see that there's a problem there if Kies and Odin connect OK.
Lennyz1988 said:
Tried changing the usb cable?
Click to expand...
Click to collapse
B3311 said:
No. Can't see that there's a problem there if Kies and Odin connect OK.
Click to expand...
Click to collapse
Bugger me, it was the cable....
Bought a new S2 yesterday - nice to have a backup, and the Nexus is meh - and tried the new cable on old S2, everything fine. Old cable on new S2, no good for USB but fine for Kies and Odin as mentioned before.
No idea why it should be like this, but sh*t happens. Easiest solution is often the best!
same problem happened to me too
I have the exact same problem, tried everything like OP, even new cable still same issue...any ideas?
Red_Vex said:
From another post
Maybe this can help
Click to expand...
Click to collapse
Tried this..and it works! thanks alot man.
Red_Vex said:
From another post
Maybe this can help
Click to expand...
Click to collapse
Thanks buddy, that was very helpful
Hi There..
Newlly purchaused device from Ebay , GT-I9100, GB 2.3.4
Using the cable that came along with the device.
When I connect it to the PC it won't even recognize the device.
Nothing happen on the PC while on the device it say : MTP-connected"
Tried on multiple PC/Laptop with different OS.
Faulty device or is there anything else to do?
Ziv
Is Kies Installed ? Is Samsung Drives Installed ?
Paulius7 said:
Is Kies Installed ? Is Samsung Drives Installed ?
Click to expand...
Click to collapse
yes it is installed. the thing is that I would expect the PC to at least recognize the device and ask for drivers even if the drivers wasn't installed
Try another USB cable(If you can) try another USB port(Just for test)
Paulius7 said:
Try another USB cable(If you can) try another USB port(Just for test)
Click to expand...
Click to collapse
did that already and even tested the original cable with the Wife's HTC. The cable is fine.
Maybe tried to switch on Another mod not MTP.
Or try to enable USB debugging in Developer options
Paulius7 said:
Maybe tried to switch on Another mod not MTP.
Or try to enable USB debugging in Developer options
Click to expand...
Click to collapse
Already tried the debugging mode. How do I change to another mod not MTP?
wizardwiz said:
Hi There..
Newlly purchaused device from Ebay , GT-I9100, GB 2.3.4
Using the cable that came along with the device.
When I connect it to the PC it won't even recognize the device.
Nothing happen on the PC while on the device it say : MTP-connected"
Tried on multiple PC/Laptop with different OS.
Faulty device or is there anything else to do?
Ziv
Click to expand...
Click to collapse
Hi,
It happened with me too, and there is nothing wrong with the device, its fine.
My friend told me this,
update your Kies software to the latest version, then close the Kies. i mean the kies application should not be running.
Then connect the device and wait for sometime, till the message appears -- MTP connected.
Then open the Kies application, and let the Kies to identify the device.
If it says some error, like device not recognized, then there is an option to debug the connectivity.
Try that option too.
It'll connect surely, but you should be patient.
I think, its the problem with Kies software. I use it only to update the Android firmware. But now, I'm on Custom ROM, so this Kies is no more required for me.
Regards,
Hereticnine.
hereticnine said:
Hi,
It happened with me too, and there is nothing wrong with the device, its fine.
My friend told me this,
update your Kies software to the latest version, then close the Kies. i mean the kies application should not be running.
Then connect the device and wait for sometime, till the message appears -- MTP connected.
Then open the Kies application, and let the Kies to identify the device.
If it says some error, like device not recognized, then there is an option to debug the connectivity.
Try that option too.
It'll connect surely, but you should be patient.
I think, its the problem with Kies software. I use it only to update the Android firmware. But now, I'm on Custom ROM, so this Kies is no more required for me.
Regards,
Hereticnine.
Click to expand...
Click to collapse
Lets assume I wanna simply connect it as mass storage. shouldn't the device be idetified ? I mean it's as if the PC OS doesn't recognize it at all
As if it wasn't even attached to the PC.
EDIT: It doesn't recognize the device on debugging mod either
wizardwiz said:
Lets assume I wanna simply connect it as mass storage. shouldn't the device be idetified ? I mean it's as if the PC OS doesn't recognize it at all
As if it wasn't even attached to the PC.
EDIT: It doesn't recognize the device on debugging mod either
Click to expand...
Click to collapse
Correct. Even without Samsung USB drivers installed your PC (I guess running Windows) should show a reaction. At least the PC should report an unknown device.
Maybe you should try installing the drivers manually? Not sure if it's gonna help but might as well try, right?
If that doesn't work either maybe you should try contacting the one you got the phone from. Maybe there's something wrong with the particular device.
bi11ie said:
Maybe you should try installing the drivers manually? Not sure if it's gonna help but might as well try, right?
If that doesn't work either maybe you should try contacting the one you got the phone from. Maybe there's something wrong with the particular device.
Click to expand...
Click to collapse
OK, one last option. Can a Faulty ROM instillation cause the device not to connect to my PC?
Other than that I guess I should get a replacement for my device.
Thanks for your assistance guys
Hi guys!
I have a rooted international Galaxy S3 (i9300) phone with a custom rom: UltimaRom (version 8.x), and using XXELLA kernel (?) and XXELLA Modem version.
Since a while, I'm trying to manage the files in it (phone memory or sd card) from my computer, simply by using an USB cable (the one given with the phone or even other cables, it doesn't matter) and the standard MTP protocol, which is used by Google since Android 3.0. And, whatever I try to do, Windows doesn't seem to notice anything. In my device manager, nothing appears. Nothing either in the "My Computer" window, it just doesn't "exist". No reaction at all from Windows. The Phone's charging, but this is all it is.
And I have the same problem using another computer (like my own laptop, or my brother's one). All computers are running Windows 8 x64 Pro.
I tried to install, re install, delete, etc. all the phone drivers I have on this computer, tried to install Samsung Kies, tried some "mounting" apps on the Play Store, nothing's working.
What should I do to make it work?
Thanks a lot!
Might be stating the obvious but is your phone set at usb debugging? I have the same issue from time to time but when I unplug and plug back it fixes itself.
Hope you get your stuff fixed soon.
Sent from my GT-I9300 using xda app-developers app
Thanks for your response.
Yes, USB Debugging is enabled.
Jiraiya-08 said:
Hi guys!
I have a rooted international Galaxy S3 (i9300) phone with a custom rom: UltimaRom (version 8.x), and using XXELLA kernel (?) and XXELLA Modem version.
Since a while, I'm trying to manage the files in it (phone memory or sd card) from my computer, simply by using an USB cable (the one given with the phone or even other cables, it doesn't matter) and the standard MTP protocol, which is used by Google since Android 3.0. And, whatever I try to do, Windows doesn't seem to notice anything. In my device manager, nothing appears. Nothing either in the "My Computer" window, it just doesn't "exist". No reaction at all from Windows. The Phone's charging, but this is all it is.
And I have the same problem using another computer (like my own laptop, or my brother's one). All computers are running Windows 8 x64 Pro.
I tried to install, re install, delete, etc. all the phone drivers I have on this computer, tried to install Samsung Kies, tried some "mounting" apps on the Play Store, nothing's working.
What should I do to make it work?
Thanks a lot!
Click to expand...
Click to collapse
That's odd.. I use Ultima ROM and have updated to 8.1.1. I just checked just to make sure (my last update was done OTA) and yeah, computer recognized phone right away.. heard a little computer sound and everything. I am also running Windows 8
The base changed in v8. If you haven't done a fac reset since then you should try that.
Ok I just tried to make a factory reset, nothing changes...
Oh, and if that can help: when the phone's booting, Windows says "Unrecognized device". When it's booted up, it disapears.
Anyone ?
Drivers...
I used these drivers.
It worked for me...
http://forum.xda-developers.com/showthread.php?t=1564104
Work for me too! THX
Thanks for your help !
Unfortunately it didn't work for me.... :/
Any other ideas ?
Sorry to keep rising this thread but this issue is really annoying... :/
Up
I still have the same problem. No other ideas please ?
? :/
Does Easy UMS work?
Can you connect via adb?
Does Odin recognize the phone?
If no to all of the above, try a different cable / port
Glebun said:
Does Easy UMS work?
Can you connect via adb?
Does Odin recognize the phone?
If no to all of the above, try a different cable / port
Click to expand...
Click to collapse
Thank you for your response !
- Easy UMS doesn't seem to work, even if the app doesn't show any error on the phone
- How do I connect via ADB ? I tried to connect the phone while it is in Download Mode, nothing appears on Windows or Odin
- As I said, in Download Mode, Odin doesn't seems to recognize anything...
And of course, I already tried to change the cable, the USB port, or even the computer i'm connecting the phone to...
Thanks again for your help
Starting to sound like a damaged micro USB port on the phone possibly, or a driver's problem
Oh, and there's a thing: when I reboot the phone, while the Samsung logo appears on the screen with the short jingle, the PC makes 3 or 4 times a sound like something has been plugged, and showes a "Unrecognized device" warning window. When the boot is finished, and the rom is loaded, everything just disappears and no sound is any longer made by the PC.
Also, please note that when I connect the phone to the PC (using the same PC, cable and USB port of course), the phone charges up just like before, without any problem.
have you tried the old drivers?
search Google for " Samsung USB drivers 1.4.6.0 "
disconnect your computer from the internet
Install the drivers.
don't reconnect to the internet.
connect your phone and let windows find the drivers
Hello Everyone
I am putting my problem in this general section with the hope to ask for help to more people compared to the Mate 8 section where not a lot of people go these days.
Since a while I am not able to connect my phone to a laptop. If I connect it to a laptop it just starts charging but nothing else. I have tried everything like:
Changing Cables (tried more than 5. I dont have the original anymore)
Changing Laptops
Changing the USB port of the phone itself
Updating Drivers
Installing Hisuite (current version 5.0.3.300)
Restore phone to factory settings
Complete formatting
Updating to the latest version (Current version Nxt-L29C185B582)
Changing the USB debugging/ Connection (MTP/PTP/etc)
And what not
The problem is, it doesnt get detected on the computer and cant connect to adb as well. All I want is to unlock bootloader and Install TWRP and Magisk. I have the unlock bootloader code but no way to unlock it since I cant connect.
Can anyone help me in fixing this stupid problem ? It is getting frustrating. If there is a hardware issue, what part needs to be replaced? Any help would be appreciated.
USB connection icon on top of the phone when connecting laptop
gandotratushar said:
Hello Everyone
I am putting my problem in this general section with the hope to ask for help to more people compared to the Mate 8 section where not a lot of people go these days.
Since a while I am not able to connect my phone to a laptop. If I connect it to a laptop it just starts charging but nothing else. I have tried everything like:
Changing Cables (tried more than 5. I dont have the original anymore)
Changing Laptops
Changing the USB port of the phone itself
Updating Drivers
Installing Hisuite (current version 5.0.3.300)
Restore phone to factory settings
Complete formatting
Updating to the latest version (Current version Nxt-L29C185B582)
Changing the USB debugging/ Connection (MTP/PTP/etc)
And what not
The problem is, it doesnt get detected on the computer and cant connect to adb as well. All I want is to unlock bootloader and Install TWRP and Magisk. I have the unlock bootloader code but no way to unlock it since I cant connect.
Can anyone help me in fixing this stupid problem ? It is getting frustrating. If there is a hardware issue, what part needs to be replaced? Any help would be appreciated.
Click to expand...
Click to collapse
Go to the Settings of your phone---> About phone----> Build number tap this 7 to 8 times-----> Developers option is enabled----> back to settings ----> go to developers option ----> enable USB debugging.
When you connect to the phone to the laptop you will find an icon on top of the screen of your phone with a USB mark "like a trident", pull down the top menu and find the USB connection tab, (like changing the sim card if you intend to call through a specific card) e.g quoted, double tap the USB tab to obtain options ---> 3 options 1) MTP 2)PTP 3) USB charging only----> select the first option MTP (Media transfer protocol).
Now connect to the laptop you will find exclamation marks in the device manager of your laptop. Load the appropriate drivers on your computer and viola! this will establish connection with the device you are having. if you find difficulty in installing USB drivers, search the thread "Attempt to load USB drivers for Micromax E484 on win XP is a fiasco" in this forum. You will find the solution for USB drivers
http://forum.xda-developers.com/android/help/attempt-to-load-usb-drivers-micromax-t3696432
Regards,
689alza
Thanks for your reply
Go to the Settings of your phone---> About phone----> Build number tap this 7 to 8 times-----> Developers option is enabled----> back to settings ----> go to developers option ----> enable USB debugging.
Already Tried
When you connect to the phone to the laptop you will find an icon on top of the screen of your phone with a USB mark "like a trident", pull down the top menu and find the USB connection tab, (like changing the sim card if you intend to call through a specific card) e.g quoted, double tap the USB tab to obtain options ---> 3 options 1) MTP 2)PTP 3) USB charging only----> select the first option MTP (Media transfer protocol).
Already tried too
Now connect to the laptop you will find exclamation marks in the device manager of your laptop. Load the appropriate drivers on your computer and viola! this will establish connection with the device you are having. if you find difficulty in installing USB drivers, search the thread "Loading USB drivers in Win XP turned to be a fiasco"
Nope. Doesnt happen
When i connect with the laptop, my laptop doesnt even make that sound for the connection.
What is the model and OS version of the device and the model and OS version of the computer? According to your symptoms your phone appears to be in option 3) USB charging only. The phone will not be detected by your laptop or the like(Computer) in this mode. Merely remains in a charging state. Are you certain the option 1) is picked MTP? If the phone is not detected there appears to be some hardware failure, try another USB port to connect to the laptop. if all else fail a service technician will pinpoint the fault. It may perhaps be a data transmission failure of the devices port to the interior of the phone. This is merely an assumption.
best remedy would be a service technician.
Hope this helps
689alza
alza689 said:
What is the model and OS version of the device and the model and OS version of the computer? According to your symptoms your phone appears to be in option 3) USB charging only. The phone will not be detected by your laptop or the like(Computer) in this mode. Merely remains in a charging state. Are you certain the option 1) is picked MTP? If the phone is not detected there appears to be some hardware failure, try another USB port to connect to the laptop. if all else fail a service technician will pinpoint the fault. It may perhaps be a data transmission failure of the devices port to the interior of the phone. This is merely an assumption.
best remedy would be a service technician.
Hope this helps
689alza
Click to expand...
Click to collapse
I have tried changing the usb charging only to all possible options but it still is the same. I tested in Linux and when I connect the phone nothing shows up in the logs. It's like it's not being connected . I have tried changing the usb port itself from the phone but it remained the same.. can the flex cable be a problem ? Mate series was never launched in India so I don't have any help from the service centre. I have to order the spare from eBay.com so there is no qualified technician who can help.. that's why I have to fix it myself somehow..
Thank you for your help
gandotratushar said:
I have tried changing the usb charging only to all possible options but it still is the same. I tested in Linux and when I connect the phone nothing shows up in the logs. It's like it's not being connected . I have tried changing the usb port itself from the phone but it remained the same.. can the flex cable be a problem ? Mate series was never launched in India so I don't have any help from the service centre. I have to order the spare from eBay.com so there is no qualified technician who can help.. that's why I have to fix it myself somehow..
Thank you for your help
Click to expand...
Click to collapse
I quite doubt the cable will be the culprit as your device charges the battery while in an established connection with the laptop. As you state the phone USB port was replaced, it could be a some glitch before the USB port in the device where there is an interruption in the data transmission signal that cannot be detected by your laptop.
Could you boot your device, computer and connect the two and take a snapshot of your device (whilst connected to the laptop) and paste the same in the forum?
Perhaps visual cue could be better at dealing such mishaps.
alza689 said:
I quite doubt the cable will be the culprit as your device charges the battery while in an established connection with the laptop. As you state the phone USB port was replaced, it could be a some glitch before the USB port in the device where there is an interruption in the data transmission signal that cannot be detected by your laptop.
Could you boot your device, computer and connect the two and take a snapshot of your device (whilst connected to the laptop) and paste the same in the forum?
Perhaps visual cue could be better at dealing such mishaps.
Click to expand...
Click to collapse
Yes of course. It is connected to a computer now. You can see it getting charged but that's about it
alza689 said:
I quite doubt the cable will be the culprit as your device charges the battery while in an established connection with the laptop. As you state the phone USB port was replaced, it could be a some glitch before the USB port in the device where there is an interruption in the data transmission signal that cannot be detected by your laptop.
Could you boot your device, computer and connect the two and take a snapshot of your device (whilst connected to the laptop) and paste the same in the forum?
Perhaps visual cue could be better at dealing such mishaps.
Click to expand...
Click to collapse
Can it be something because of some wrong flash ? This problem has survived through 2 versions and 1 system upgrade through firmware finder .. and a complete format
USB trident is not seen on the device
gandotratushar said:
Yes of course. It is connected to a computer now. You can see it getting charged but that's about it
Click to expand...
Click to collapse
Your USB trident icon is not indicated on the device, If you were to receive power from the laptop the trident would be displayed on top of the screen, even for charging the battery. The power source for your device appears to from other than the laptop.
I have pasted my device after connecting to the computer and the second icon from the top left is the USB Trident icon indicating connection with my laptop. Have taken the snapshot of the menu that I was describing .
I strongly feel you have a hardware failure rather than a simple fix and would require the help of a technician (ordinary if professional is unavailable). Am skeptic you could mend that on your own unless you are proficient in electronics. This mishap is not due to flashing wrongly too, unless you have changed the stock ROM with some custom ROM which has some bug that affect the USB alone.
Take the assistance of a technician whether professional or less is my counsel
Thank you
alza689 said:
Your USB trident icon is not indicated on the device, If you were to receive power from the laptop the trident would be displayed on top of the screen, even for charging the battery. The power source for your device appears to from other than the laptop.
I have pasted my device after connecting to the computer and the second icon from the top left is the USB Trident icon indicating connection with my laptop. Have taken the snapshot of the menu that I was describing .
I strongly feel you have a hardware failure rather than a simple fix and would require the help of a technician (ordinary if professional is unavailable). Am skeptic you could mend that on your own unless you are proficient in electronics. This mishap is not due to flashing wrongly too, unless you have changed the stock ROM with some custom ROM which has some bug that affect the USB alone.
Take the assistance of a technician whether professional or less is my counsel
Thank you
Click to expand...
Click to collapse
I did flash a different rom .. but then back to stock recently.
I can do basic electronics but the if the problem lies in Mobo .. then nothing can be done .. as I don't have the spares available in India. But I would hate to lose this phone as it was a perfect fit for my needs
gandotratushar said:
I did flash a different rom .. but then back to stock recently.
Then the question of wrong flash or ROM issue does not arise
I can do basic electronics but the if the problem lies in Mobo .. then nothing can be done .. as I don't have the spares available in India.
If you do not have spares is best left alone rather than tampering with it and rendering the device useless if any untoward incidents tends to occur.
But I would hate to lose this phone as it was a perfect fit for my needs
Send to the vendor directly if you have warranty for the device stating its complaints or request your relative or friends who live in the area where you bought your phone to hand it to the vendor or service technician and bear its expenses
Click to expand...
Click to collapse
Thank you
alza689 said:
Thank you
Click to expand...
Click to collapse
Is there a way to unlock bootloader somehow without connecting to usb ? That would also solve the purpose.. I want to root it for some of the things to work and with the latest upgrade to latest version I lost the unlocked bootloader and root.. if somehow I can unlock and root .. I should be fine without the usb connection to computer.. but I have ran out of ways
Does Kingroot work for you?
I mean did u try it or u just want magisk?
If u didn't, kingroot may be able to root ur device and unlock ur bootloader, then u can flash TWRP using rasher.. & make a backup BTW...
After that, try using the adb sideload in TWRP to test ur connection with ur computer.
TWRP for ur device : (q.gs/DxuAH)
There is a way to unlock bootloader without USB via developers option.
Go to settings-----> About phone-----> Build number ( Tap this option around 7 or 8 times) till developers option is enabled------> go back to settings-----> developers option-----> OEM unlock option (Enable this option) to unlock the bootloader.
Xeedius said:
Does Kingroot work for you?
I mean did u try it or u just want magisk?
If u didn't, kingroot may be able to root ur device and unlock ur bootloader, then u can flash TWRP using rasher.. & make a backup BTW...
After that, try using the adb sideload in TWRP to test ur connection with ur computer.
TWRP for ur device : (q.gs/DxuAH)
Click to expand...
Click to collapse
Thank you for the advice.. I hadn't tried it earlier but after your suggestion I did.. kingroot says I need to unlock my bootloader to root it.. so I am back to square one..
alza689 said:
There is a way to unlock bootloader without USB via developers option.
Go to settings-----> About phone-----> Build number ( Tap this option around 7 or 8 times) till developers option is enabled------> go back to settings-----> developers option-----> OEM unlock option (Enable this option) to unlock the bootloader.
Click to expand...
Click to collapse
This gives me an frp unlock and not a phone unlock.. still not able to root
There is no FRP unlock.
gandotratushar said:
This gives me an frp unlock and not a phone unlock.. still not able to root
Click to expand...
Click to collapse
There is no FRP unlock, to circumvent FRP you need to factory reset or flash your firmware. The above quotation was to unlock the boot loader as you cannot access through your computer. Your sole option to unlock boot loader was through the above directions.
Moreover, King root application never ask for boot loader to be unlocked. Although a little unstable this is the initial program to root any device. Once you have the TWRP setup then you could switch to Super Su etc. according to your preference.
Could you paste your developers option snapshot here...
Regards,
689alza
gays
me too have this problem ( only usb port for charge and other option's not work)
and i want back to orignal system
and i want know how download orignal system (from Huawei web site) to my phone
can any one help me how
or how can fixed this problem
and i have other problem
when i try to boot to TWRP phone stay on " your device is booting now..."
so any one can help me how reinstall TWRP without PC or why this problem ??
TWRP is not installed duly on your phone
Hello! Omar Dahy,
OmarDahy said:
gays
me too have this problem ( only usb port for charge and other option's not work)
Connect your phone to your computer or laptop, a trident icon appears on your phone notification area, pull down the notifications and identify the notice as USB connection, tap twice you willk be provided with options.
and i want back to orignal system
and i want know how download orignal system (from Huawei web site) to my phone
My phone was Micromax and I am not aware of your phone's firmware, try and google or search the Xda developers forum under your phones model number for the original firmware.
can any one help me how
or how can fixed this problem
and i have other problem
when i try to boot to TWRP phone stay on " your device is booting now..."
Your phone has not installed TWRP duly, therefore it boots straight to the system. Search again in this XDA forum, with your pnone name and model number to obtain instructions
so any one can help me how reinstall TWRP without PC or why this problem ??
Click to expand...
Click to collapse