Unbricked the phone, solved the NV problem flashing the ones found on the net, unlocked the phone but baseband still unknow. Tried with miracle thunder 3.25 to fix it but got the error "no find user data(1)" looks like I've lost the entire part of firmware that use the modem. For me it's enough restore the IMEI part with all 0 so I can put back my original with the miracle box, any suggestion on how to do to restore this part of the firmware?
hello i have the nv data corrupt problen, can ypu tell me how ypu fixed it?
Poco X3 GT NVDATA Imei Repair File Backup_Xiaomi_M2104K10AC – ROMadd
romadd.com
I've flashed only this file with spflash tool, then when you restart the phone just connect to the WiFi and wait, it will be unlocked alone. The problem for me it's the baseband not fixed.
Bonscia said:
Poco X3 GT NVDATA Imei Repair File Backup_Xiaomi_M2104K10AC – ROMadd
romadd.com
I've flashed only this file with spflash tool, then when you restart the phone just connect to the WiFi and wait, it will be unlocked alone. The problem for me it's the baseband not fixed.
Click to expand...
Click to collapse
ok so u just flashed the nvcfg.bin? can u tell me exactly how u did it? i dont want to mess up my phone again , dunno what partition to put what file
How to restore nvram.bin & nvdata.img using SP Flash tool
If you run into null IMEI on your Mediatek (MTK) Android device then it might not be able to make or receive phone calls. There are several other methods to fix Null IMEI on Mediatek devices but this
forum.hovatek.com
Bonscia said:
How to restore nvram.bin & nvdata.img using SP Flash tool
If you run into null IMEI on your Mediatek (MTK) Android device then it might not be able to make or receive phone calls. There are several other methods to fix Null IMEI on Mediatek devices but this
forum.hovatek.com
Click to expand...
Click to collapse
yeah now i was able to get into the original rom thanks... amazing... but i need to fix imei and mac problem i believe... in the set up it wont connect to wifi nor read the sim card, so i cant get in at all... but thanks this is a big step
If you have unlocked bootloader flash the last official firmware with miflash not spflash, in my case I fixed BT and wifi except the IMEI and phone line. Engeeniring ROM works fine too but no IMEI too so no line or baseband. I've bought the Chinese miracle program but when I try to fix imei the program says "no data" to fix so still phone stucked....
Bonscia said:
If you have unlocked bootloader flash the last official firmware with miflash not spflash, in my case I fixed BT and wifi except the IMEI and phone line. Engeeniring ROM works fine too but no IMEI too so no line or baseband. I've bought the Chinese miracle program but when I try to fix imei the program says "no data" to fix so still phone stucked....
Click to expand...
Click to collapse
yeah i used sp flash tool cause it lets me flash targeted bin/img... miflash is also great but wont let me target a single img... well right now am trying to fix the system not mounting in the unoficial twrp for x3 gt... ima try to root the phone and use xposed modules to fix imei, but idk why it wont let me mount some partitions on twrp like system... it gives error trying to install magisk
I've rooted the phone with no problem with magisk: install latest magisk manager first then flash correct magisk with fastboot command then restart and apply the the patch with the manager. Twrp B works too to me. I'm just not sure xposed module will works with Android 10, I'll try.
Bonscia said:
I've rooted the phone with no problem with magisk: install latest magisk manager first then flash correct magisk with fastboot command then restart and apply the the patch with the manager. Twrp B works too to me. I'm just not sure xposed module will works with Android 10, I'll try.
Click to expand...
Click to collapse
if u have lastest magisk modules it wont wotk at all of iv read... its like moving to a new system stuff... Zygisk... now there are 2 xposed riru and zygisk, one cant work wkth the other active... maybe for some modules to work u might need to install an older version of magisk
Rynhe said:
if u have lastest magisk modules it wont wotk at all of iv read... its like moving to a new system stuff... Zygisk... now there are 2 xposed riru and zygisk, one cant work wkth the other active... maybe for some modules to work u might need to install an older version of magisk
Click to expand...
Click to collapse
yeah i rooted using the magisk apk patching the boo img i did not know this method ahahaa
Let me know if you can fix the baseband and IMEI problem
[SOLVED] suddenly unknown imei
ok so, i was using my phone normally yesterday, but out of nowhere, my SIM card stopped working and i couldn't use mobile internet/calls anymore. So i checked my settings and i saw my IMEI was marked as unknown, the same with baseband. The A32...
forum.xda-developers.com
It can also solve the baseband problem, but it can't edit imei. I'll try this file first. I'll upload the factory firmware later. He can fix the baseband problem!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi, the last picture you posted is the engineering firmare, I've tried that too but still no baseband, I think wen I formatted the phone with spflash he deleted the partition with the baseband and IMEI data and putting a fresh new firmware can't solve the problem. Even Chinese special software I've bought he can't fix it, it says "nothing to write" when I try to put my IMEI in.
The epidemic is repeated, dear friends, pay attention to protection!
Bonscia said:
Hi, the last picture you posted is the engineering firmare, I've tried that too but still no baseband, I think wen I formatted the phone with spflash he deleted the partition with the baseband and IMEI data and putting a fresh new firmware can't solve the problem. Even Chinese special software I've bought he can't fix it, it says "nothing to write" when I try to put my IMEI in.
Click to expand...
Click to collapse
There are two types of factory firmware, one is to clear the nv-gcerase firmware and the other is not to clear the nv-keep firmware. Your flash firmware probably contains the DB file for editing the imei. What I have here is the firmware that has been confirmed to contain baseband files! Can you share your firmware with me?
I put only the original M2104K10AC Chopin firmware, my original radio baseband was MOLI.NR15.R4.TC8.PR2.SP.V1.P46
Now I've updated to the latest firmware
V13.0.4.0.SKPCNXM But still no baseband.
I've tried all the original firmwares with no success.
If you have this kind of firmware with baseband I'll try immediately if you can post it, and then I'll try to put back my IMEI with miracle thunder.
Bonscia said:
I put only the original M2104K10AC Chopin firmware, my original radio baseband was MOLI.NR15.R4.TC8.PR2.SP.V1.P46
Now I've updated to the latest firmware
V13.0.4.0.SKPCNXM But still no baseband.
I've tried all the original firmwares with no success.
If you have this kind of firmware with baseband I'll try immediately if you can post it, and then I'll try to put back my IMEI with miracle thunder.
Click to expand...
Click to collapse
Redmi Note 10 Pro China (Chopin) ENG.7z
drive.google.com
SP_Flash_Tool_v5.2208_Win.7z
drive.google.com
The above factory firmware is what I used, I spent $15 to buy, you try to use the tool I gave you to choose all formatted to download, there should be a baseband, as if it comes with ROOT permission, I play the game will flash back, the seller said open the opportunity to open the IMEI repair port, but I do not have the tool to write IMEI, brush into other people's backup NV files can boot, but will show other people's Millet account, later I will post, share my used tools, I'm ready to send my phone for post-sales repair!
Why not put these IMEI security information in a chip alone, I really served Xiaomi.
Oh yes, and remember to bypass the verification.
QinPengPeng said:
Redmi Note 10 Pro China (Chopin) ENG.7z
drive.google.com
SP_Flash_Tool_v5.2208_Win.7z
drive.google.com
Firmware pabrik di atas adalah apa yang saya gunakan, saya menghabiskan $ 15 untuk membeli, Anda mencoba menggunakan alat yang saya berikan kepada Anda untuk memilih semua yang diformat untuk diunduh, harus ada baseband, seolah-olah dilengkapi dengan izin ROOT, saya akan memainkan game flash back, kata penjual buka kesempatan buka port repair IMEI, tapi saya tidak punya alat untuk menulis IMEI, sikat ke file NV backup orang lain bisa boot, tapi akan menunjukkan akun Millet orang lain, nanti saya akan posting, bagikan alat bekas saya, saya siap mengirim telepon saya untuk perbaikan pasca-penjualan!
View attachment 5600545
View attachment 5600547
View attachment 5600551
Mengapa tidak memasukkan informasi keamanan IMEI ini dalam satu chip saja, saya sangat melayani Xiaomi.
Oh ya, dan jangan lupa untuk melewati verifikasi.
Click to expand...
Click to collapse
where can i buy the eng rom the problem is i have a poco m4 pro 5g imei null and no eng rom
Related
Hi
I have HUAWEI Y210-0100 and im new to root and all.
I have rooted the phone and than I try to install "rom" but it stuck on installing it
I readed on forum that I have to put the folder dload with UPDATE.APP in it on SD card
and to install it on it, but in bouth ways it stuck on Unpacking and have error.
Another problem appeared, when i play video from youtube and I rotate phone the screen rotates for 180 degrees,
and I rotate phone for 180 degrees and same problem.
And onother problem appeared, Back, Home and Menu butons are mixedup , Back buton works like home buton,
home like menu and menu like back.
HUAWEI Y210-0100 is With on sim card, 256 ROM, 512 RAM, memory slot and 1Ghz CPU;
it hase Android 2.3.6, Kernel 2.6.38.6-perf [email protected] #1; Baseband 109808;
Build No. Y210-0100V100R001EURC00B859; Custom version CUSTC561D001.
Please help me with this. How to fix this problems and how to install all and with what tool.
Thanks in advance.
Macedonian User
delictis said:
Hi
I have HUAWEI Y210-0100 and im new to root and all.
I have rooted the phone and than I try to install "rom" but it stuck on installing it
I readed on forum that I have to put the folder dload with UPDATE.APP in it on SD card
and to install it on it, but in bouth ways it stuck on Unpacking and have error.
Another problem appeared, when i play video from youtube and I rotate phone the screen rotates for 180 degrees,
and I rotate phone for 180 degrees and same problem.
And onother problem appeared, Back, Home and Menu butons are mixedup , Back buton works like home buton,
home like menu and menu like back.
HUAWEI Y210-0100 is With on sim card, 256 ROM, 512 RAM, memory slot and 1Ghz CPU;
it hase Android 2.3.6, Kernel 2.6.38.6-perf [email protected] #1; Baseband 109808;
Build No. Y210-0100V100R001EURC00B859; Custom version CUSTC561D001.
Please help me with this. How to fix this problems and how to install all and with what tool.
Thanks in advance.
Macedonian User
Click to expand...
Click to collapse
ok give me more details..
1) what did u have installed when you rooted your phone? froyo? GB? ICS?
2) where did you download the upgrade from?
3) what is the upgrade for ? GB or ICS?
rjspark89 said:
ok give me more details..
1) what did u have installed when you rooted your phone? froyo? GB? ICS?
2) where did you download the upgrade from?
3) what is the upgrade for ? GB or ICS?
Click to expand...
Click to collapse
i think nothing with success, i downloaded some tool from chinese forum for recowery with boot.img
in it. But I think that was the problem, becouse when I opened that tool the boot was something Y201t.
and than all went wrong. Wifi error, butons mixed and screen problem. I fund onother tool wich fixed wifi,
but buttons and screen remains the same.
I downloaded tools and roms that much my desktop was full, and nothing works.
I tried to put the dload with update.app on sd to install but when it start goes 1/2 and after few seconds error and remove batery.
I tried different update.app files but nothing. Im totally new in this so I don't understand it that good.
I think but Im not sure, if you could point me the link with some tool like recowery it would fix this.
I wanted just to fix the phone to work normally, with original rom.
that would be enough for me, and I'll sell it definitly if you could help me to fix this
Thanks and I'm sorry for my bad engllish and poor knowladge.
delictis said:
i think nothing with success, i downloaded some tool from chinese forum for recowery with boot.img
in it. But I think that was the problem, becouse when I opened that tool the boot was something Y201t.
and than all went wrong. Wifi error, butons mixed and screen problem. I fund onother tool wich fixed wifi,
but buttons and screen remains the same.
I downloaded tools and roms that much my desktop was full, and nothing works.
I tried to put the dload with update.app on sd to install but when it start goes 1/2 and after few seconds error and remove batery.
I tried different update.app files but nothing. Im totally new in this so I don't understand it that good.
I think but Im not sure, if you could point me the link with some tool like recowery it would fix this.
I wanted just to fix the phone to work normally, with original rom.
that would be enough for me, and I'll sell it definitly if you could help me to fix this
Thanks and I'm sorry for my bad engllish and poor knowladge.
Click to expand...
Click to collapse
bro relax.. dont be sorry for the english or the knowledge part!.. you will learn both soon enough
did you try flashing this ROM? its the official GB for your phone
http://consumer.huawei.com/en/support/downloads/detail/index.htm?id=14221
also check these links
http://huaweiy210d.blogspot.in/
rjspark89 said:
bro relax.. dont be sorry for the english or the knowledge part!.. you will learn both soon enough
did you try flashing this ROM? its the official GB for your phone
http://consumer.huawei.com/en/support/downloads/detail/index.htm?id=14221
also check these links
http://huaweiy210d.blogspot.in/
Click to expand...
Click to collapse
TNX for your time and help
I'll try to flash that ROM and let you know.
I hope that works.
TNX
Hi bro
I tried the ROM that you send me, but no sucess, error again on unpacking
can you send me link for a tool for recowery with boot.img file for this phone
If you have any other idea pls tell me
Is there any tool to flash the ROM from PC?
TNX
delictis said:
Hi bro
I tried the ROM that you send me, but no sucess, error again on unpacking
can you send me link for a tool for recowery with boot.img file for this phone
If you have any other idea pls tell me
Is there any tool to flash the ROM from PC?
TNX
Click to expand...
Click to collapse
i think the problem.. is that.. see to sometimes.. custom recovery.. like cwm and twrp doesn't really work well when you try to flash stock ROMS.. so.. do you have your stock recovery? if so try going into download mode/pink screen mode ..replace cwm with your stock recovery.img.. then try updating again..
Huawei Ascend y210-100
Hello everyone,
I have a problem with my new Huawei Ascend Y210-100 Mobile. I wanted to root it but I go wrong. Because i have ran the ClockworkMod Recovery 5.0.2.8 For V8404-Y210-By Gocmobile.net.zip for Y210D. (S.H.I.T.) Grrrrrr.
My Y210 do stupid things The phisical buttons do functional full badly.
WI-FI and HotSpt don't work.
I have found the Factory firmware on Huawei support site but i am not able to upgrade the Factory ROM. Unpack and the install section stopped.
Here is the all found Firmwares and websites:
ORIGINAL Factory Firmware: h t t p://consumer.huawei.com/en/support/downloads/detail/index.htm?id=14221
This was another ROOT method: w w w.symbianize.com/showthread.php?t=929464 (I don't suggest.)
And this was the BAD choice!!!!!: !!!ONLY Y210D!!!
h t t p ://ge.tt/8ZscJic/v/0?c
PLEASE PLEASE Huawey GURUs Help me.
Thanks a lot for every useful advice.
Tony (HUN)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
JUST one more request.
Does anybody an original Huawei ascend 210-100 Factory firmware saved backup (without personal datas of course!!!) by ClockWorkRecovery PLEASE???
Could someone do a factory firmware backup and send to me Please Please PLEASEEEEE?
begi.76 @ gmail .com (put in formal email format)
did anyone reply you?
helping a friend to root/custom rom this phone, but not many good results.
no CM7, no ICS.... only found GB and GB themed like ICS
GB themed like ICS
http://myhvgagames.blogspot.sg/2013/08/ics-custom-rom-for-y210-single-sim.html
Factory FW (GB), unzip read instructions.
http://consumer.huawei.com/en/support/downloads/detail/index.htm?id=14221
Is anyone currently doing a DEV for this unit?
Good Morning Sir,
No, nobody sent me flash file yet.
But I asked help just 2 days before.
Thanks for your help. I will try to do ASAP.
I will send feedback imediately as soon as work well.
PS: sorry 4 my bad English. I hope almost clear for everyone who read it.
Thanks,
Tony
---------- Post added at 10:06 AM ---------- Previous post was at 09:39 AM ----------
Hello Again,
I try to use the GB original firmware already.
I couldn't flashing the ROM. It was write in the first note.
As you can see in the pictures.
Something is go wrong with the CRW install (y210D )
Maybe the fastboot or something other because the 210D options available in my 210-100. I mean the HOME, BACK, MENU buttons working like in case 210D.
The SD card flashing not working. (cry, cry, cry)
I can find this informations in the sd_update.log:
"filename = /mmc1/dload/update.app
call RCV_MODULE_END_EVENT failed,module = OEMSBL_VER_LIST
CMD=0xf,moduleaddr = 0xf0000000, len_tmp=0x2c54
"
Someone can unpack the app file? Maybe there can find the solution.
Thanks,
desperate Tony. (HUN)
Is your CWM working or not working, you no mention.
Flash CWM method 1
http://androidarea51.com/***-all-things-root-***-287/cwm-n-root-for-the-huawei-y210-build-b865/
Flash CWM method 2
http://myhvgagames.blogspot.sg/2013/08/3-in-1-stock-recovery-clockworkmode.html
Once you have CWM (or already using), flash this. (i am using for Y210-100)
http://myhvgagames.blogspot.sg/2013/08/ics-custom-rom-for-y210-single-sim.html
Below 2 for Y210D, have flash wifi can connect but no stable, Home/Menu/Back keys all jumble up also
Code:
VIETTEL-V8404-face-JB-By-Gocmobile.Net.zip
Code:
v8404-GMB-05-ModS4-ICS.zip
If you still problem, please download factory and try flash to stock.
Hi,
Yes the CWR working well. I can make backups and every function working as well.
I have tried some rooting method but no one worked.
The truth, I didn't want to install CWR just I wanted to ROOT my mobile.
Reason: Too less memory makes slow the phone, and write it "too less memory pls delete some program etc..."
But ones, after the y210D CWR install, I can root the phone with SuperOneClick 2.3.3. (yeeeeeeeeaaaaaaah)
ROOT, UNROOT, SHELL ROOT working well ( I said excellent.)
AFTER: Just I can't use HOME/BACK/MENU keys and WI-FI. (Cry)
Summary.
I'd like install the factory Firmware (I am not able to do this because it is freezing on 2nd step.) You can see in previous 2 pictures.
I'd like rooting the phone. Reason: intstall or moving programs to SD card.
I wouldn't like install the CWR because no need it for me.
Something BAD thing happend during the CWR install with 210D, because after the boot I have experience the functionality difference.
Okey I think maybe a bit difficult my English. If something no clear please write here and i will try to rephrase that.
Thanks.
Tony.
Hey! It would be a problem, I tried to ask one of the CM rom on Huawei Y200, and everything is done as it should, but the phone will go only to the boot LOGO .... Somebody help me!
Tapatalk 2-vel küldve az én Optimus 4X HD-ről
for
Hi everyone!
Maybe the problem with the "upgrade" option is the next.
This firmware method not able to downgrade just upgrade or re install the actual firmware.
I have checked the current version and now ver. Y210-0100V100R001C00B876!!! Android kernel 2.6.38.6 pref.
I can't find the newer one this kind of version on the Huawei support site.
Just I can find these: V100R001C00B856 and V100R001C00B839.
These versions younger like on mine.
Maybe this is the problem?
Does someone a B876 version Ascend 210-100 link please?
Thanks.
Tony.
mandroid76 said:
Hi everyone!
Maybe the problem with the "upgrade" option is the next.
This firmware method not able to downgrade just upgrade or re install the actual firmware.
I have checked the current version and now ver. Y210-0100V100R001C00B876!!! Android kernel 2.6.38.6 pref.
I can't find the newer one this kind of version on the Huawei support site.
Just I can find these: V100R001C00B856 and V100R001C00B839.
These versions younger like on mine.
Maybe this is the problem?
Does someone a B876 version Ascend 210-100 link please?
Thanks.
Tony.
Click to expand...
Click to collapse
UP.....
i m interesting Too.......
No way to flash original rom after a custom one.
bob4x4 said:
UP.....
i m interesting Too.......
No way to flash original rom after a custom one.
Click to expand...
Click to collapse
u should research more... original rom and instructions provided. ive done it before sometime back.
felix_fx2 said:
u should research more... original rom and instructions provided. ive done it before sometime back.
Click to expand...
Click to collapse
HI FELIX PLEASE!!! help me!!!!!
I've found too original firmware and guidelines (put dload folder in SD and press volume up-down - power on)
but every time , after automatic unpacking procedure i got error..
Best Regards.
Bob.
bob4x4 said:
HI FELIX PLEASE!!! help me!!!!!
I've found too original firmware and guidelines (put dload folder in SD and press volume up-down - power on)
but every time , after automatic unpacking procedure i got error..
Best Regards.
Bob.
Click to expand...
Click to collapse
try download the frimware again.
make sure it is the correct one... it's not a point blank to get to the correct download page...
i'll try generate one from mine tomorrow and you can double check with what you downloaded.
felix_fx2 said:
try download the frimware again.
make sure it is the correct one... it's not a point blank to get to the correct download page...
i'll try generate one from mine tomorrow and you can double check with what you downloaded.
Click to expand...
Click to collapse
thank you very much.
i've downloaded thes two..
HUAWEI_Y210_firmware(Y210-0100%2CAndroid 2.3%2CV100R001C00B856%2CNormal%2C05011DPY)
And
Ascend_Y210(Y210-0100_Android_2.3_V100R001C00B839_Normal_05011DPY)
think maybe something goes wrong in the rom custom that i've installed.
no news?
best regards.
Regards to all!
Another brick I know...
I tried to install TeamWin, found this post on htcmania com showthread.php?t=591253.
Anyway on step 4. Ejecuta windows.bat the install-script I mess up recovery.img I suppose.
When I Power ON phone, I got this message:
Image signature verify fail!
Your boot/recovery image may have an incorrect signature.
...
Only have access to famous "Pink screen", tried many of update.app but every time it fails.
Also, is it necessary to unlock bootloader for this update.app, or to do something else, because it keeps fail on every firmware for G510 and Y300 that I try by now? I'm newbie to this, so sorry if is this stupid question (which I guess it is).
Is there any solution for this, any suggestions guys? Please, I'm close to breakdown.
----
Almost sure that I'm doing something wrong, tried these ROMs below (maybe some other also, but I wrote these in note later) and same error "Fail" .
B165
B166
B173
B178
B189
Anyone with idea?
I manage somehow (friend bought at same time) to find out potential ROM version, B195.
Googled for it, but no success by now.
To be specific: V100R001C00B195
Does someone have a link maybe?
Have a friend who works in phone service. They have an original ROM and he Flash it.
So for the future people who have same problem, here is explanation which I found on net:
"FAIL VERIFY IMAGE SIGNATURE":
The explanation is that the original recovery has a function to install zips with a particular firm, in this case should be Huawei.
However, almost all the ROMS officers who have taken both individual operators and Huawei for this phone have been format Update.app, installable using the "Firmware installer" phone and all had considerable weight.
But there have been some cases in which any operator like Orange Spain, used a zip supplied via OTA (like Update.app ) weighing approximately 90 MB (A minor update) whose function is to update the compilation B179 to B195, and what happens with this update zip format, is that the system makes a brief signature verification bootloader and the recovery and boot.img.
If the system detects that the Bootloader, the recovery or boot.img not have the original signature of Huawei or have been inserted through a hack or the like without having unlocked the bootloader officially, we will automatically display the following message after trying to install "Image Verify signature fail" in red letters.
The reason is surely and as I said before, we have unlocked the bootloader by an unofficial method or change some of those partitions by some hack before installing the zip, and this zip file contains the bootloader, recovery and boot.img because of their small weight, ie, is not able to replace him as the Update.app to return to the originals and leave us avoid this error signature verification.
A Update.app Bootloader completely regenerates us, so they used to solve 90% of problems. In this case we have no salvation unless there is a compilation format've tried installing Update.app or higher, and all other Update.app will Fail in the installation.
In the case of Orange model no Update.app the B195 is no compilation or compilation superior format Update.app , so we must take the SAT to have it fixed, and of course, do as we do not know what happened if we submit to third grade.
Solution is to find adequate ROM and flash with it. Mine was as I mention V100R001C00B195 and on net I can't find that one, so phone service was my destiny. Hope someone else will have more luck.
Regards!
1grouchy said:
Have a friend who works in phone service. They have an original ROM and he Flash it.
So for the future people who have same problem, here is explanation which I found on net:
"FAIL VERIFY IMAGE SIGNATURE":
The explanation is that the original recovery has a function to install zips with a particular firm, in this case should be Huawei.
However, almost all the ROMS officers who have taken both individual operators and Huawei for this phone have been format Update.app, installable using the "Firmware installer" phone and all had considerable weight.
But there have been some cases in which any operator like Orange Spain, used a zip supplied via OTA (like Update.app ) weighing approximately 90 MB (A minor update) whose function is to update the compilation B179 to B195, and what happens with this update zip format, is that the system makes a brief signature verification bootloader and the recovery and boot.img.
If the system detects that the Bootloader, the recovery or boot.img not have the original signature of Huawei or have been inserted through a hack or the like without having unlocked the bootloader officially, we will automatically display the following message after trying to install "Image Verify signature fail" in red letters.
The reason is surely and as I said before, we have unlocked the bootloader by an unofficial method or change some of those partitions by some hack before installing the zip, and this zip file contains the bootloader, recovery and boot.img because of their small weight, ie, is not able to replace him as the Update.app to return to the originals and leave us avoid this error signature verification.
A Update.app Bootloader completely regenerates us, so they used to solve 90% of problems. In this case we have no salvation unless there is a compilation format've tried installing Update.app or higher, and all other Update.app will Fail in the installation.
In the case of Orange model no Update.app the B195 is no compilation or compilation superior format Update.app , so we must take the SAT to have it fixed, and of course, do as we do not know what happened if we submit to third grade.
Solution is to find adequate ROM and flash with it. Mine was as I mention V100R001C00B195 and on net I can't find that one, so phone service was my destiny. Hope someone else will have more luck.
Regards!
Click to expand...
Click to collapse
If its not too late, have a look at this:
https://docs.google.com/file/d/0B1th-jpHK5tXeGt4WWJNS0R1d0k/edit
Its for the Y300 but:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Its worth a shot.
reply
1grouchy said:
I manage somehow (friend bought at same time) to find out potential ROM version, B195.
Googled for it, but no success by now.
To be specific: V100R001C00B195
Does someone have a link maybe?
Click to expand...
Click to collapse
did you find any solution for that
did you already solve it ?
I have the same problem, I only can go on the pink screen.
I'm a big noob and I don't speek very good english; can you help me?
How to flash it ? my phone doesn't boots even to recovery mode !
Hi I have googled for find the way to flash wbrambley y300 image but I didn't find the way . also , my phone is huawei ascend g510 and it was stock-factory rom and it was rooted with busybox
- sorry , I don't have perrmission to upload file or insert photo or even a link!
RGH_PRIME said:
Hi I have googled for find the way to flash wbrambley y300 image but I didn't find the way . also , my phone is huawei ascend g510 and it was stock-factory rom and it was rooted with busybox
- sorry , I don't have perrmission to upload file or insert photo or even a link!
Click to expand...
Click to collapse
You need to put the UPDATE.APP in a folder named "dload" in the sdcard and push vol - and + at the same time then power until it shows updating
nagalun said:
You need to put the UPDATE.APP in a folder named "dload" in the sdcard and push vol - and + at the same time then power until it shows updating
Click to expand...
Click to collapse
I know and I have done the same steps with pink screen on my older phones
but the problem is yhe usb driver . I tried to install kitkat custom rom from huaweiNews.com to repair it and I installed all the drivers for Huawei g510-0200 I found there and in windows control panel I have just found this and I couldn't transfer the files to flash it !
and also , this problem (image verify failed) caused by installing wrong version of CWM (sumsung's instead)
SORRY IF I SHOULDN'T ASK THIS QUESTION HERE .
RGH_PRIME said:
I know and I have done the same steps with pink screen on my older phones
but the problem is yhe usb driver . I tried to install kitkat custom rom from huaweiNews.com to repair it and I installed all the drivers for Huawei g510-0200 I found there and in windows control panel I have just found this and I couldn't transfer the files to flash it !
and also , this problem (image verify failed) caused by installing wrong version of CWM (sumsung's instead)
Click to expand...
Click to collapse
Um, just take out the sd card, put it in your PC with an adapter or something and copy the files there?
Help please
nagalun said:
Um, just take out the sd card, put it in your PC with an adapter or something and copy the files there?
Click to expand...
Click to collapse
Hi , sorry but my phone still doesn't works . I have tried several firmware updates and roms . but non of them worked , thanks from nagalun because of his wise answer, but still I have these problems :
1- it fails in any frimware update ( from huaweinews.com - huawei original frimware from company site - y300 frimwares , etc)
2- phone doesn't mounts in pink screen (I have found the question in the forum . so I'm following it and still no solution . if anyone knows the answer , search for the question and answer it there )
please help me
Hi,
as above, the same problem with my sons G510. He has a Huawei G510-0100 phone, with a 4.1.1 Android, Vodafone (European)version.
I'd try to flash TWRP to install a custom ROM, but the phone now shows only that the image/recovery signature is invalid. The phone doesn't starts, can't enter in fastboot or recovery mode, but I can acces the pink screen. Thats all, the phone is stucked there.
How can I repare this halfbricked device?
(PS.
From Huawei's webpage I downloaded the factory G510-0200 Kernel (3.4.0 version, .rar file).
My phone is G510-0100 version.)
Solved.
I had the same problem. I installed custom recovery and I woke up with error "Your boot/recovery image may have an incorect signature" bla, bla, bla.
How solved I? Simple.
You must reflash stock rom for your Huawei Ascend G510 (0100, 0200 or 0251). If not know your version? Don't wory. Download and flash everyone version until result is ok.
All you need find here http://huawei-g510.com/
Hi everyone!
I recently tried out a new custom rom and it seems to have messed up my IMEI and serial number...
Also, it thinks I have a dual sim model, but it is single sim. Yet it still shows me that I have two slots.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have been modding my phones for years but I never had a problem like this.
I have tried literally everything to fix it. I've read through all the posts, forums and found nothing.
I'm hoping someone here can help me fix it.
Thanks in advance!
[EDIT]
I managed to change my IMEI number back to the original and get a serial number, but it still won't connect to the network.
Currently it says "Error while searching for networks." when I try to search for them and "Unable to connect. Try later." when I try to automatically select a network.
Try to install latest modem.
IZIPIZI135 said:
Try to install latest modem.
Click to expand...
Click to collapse
I have the same issue. I upgraded to UAEGT3 and it messed up my phone. Emergency calls only and IMEI status is NG from *#0011# menu.
Any resolution?
matrixology said:
I have the same issue. I upgraded to UAEGT3 and it messed up my phone. Emergency calls only and IMEI status is NG from *#0011# menu.
Any resolution?
Click to expand...
Click to collapse
Install older firmware like S9DTD7.
Download that and install through odin.
IZIPIZI135 said:
Install older firmware like S9DTD7.
Download that and install through odin.
Click to expand...
Click to collapse
Downgrade is not possible due to binary version error. The binary of UAETG3 is 10 which is so far the highest and Samsung restricts downgrading to older binary.
Take it to a Samsung repair facility if you have one.. They can get it back for you.
snarkygoblin092 said:
Hi everyone!
I recently tried out a new custom rom and it seems to have messed up my IMEI and serial number...
Also, it thinks I have a dual sim model, but it is single sim. Yet it still shows me that I have two slots.
I have been modding my phones for years but I never had a problem like this.
I have tried literally everything to fix it. I've read through all the posts, forums and found nothing.
I'm hoping someone here can help me fix it.
Thanks in advance!
[EDIT]
I managed to change my IMEI number back to the original and get a serial number, but it still won't connect to the network.
Currently it says "Error while searching for networks." when I try to search for them and "Unable to connect. Try later." when I try to automatically select a network.
Click to expand...
Click to collapse
Well i have solution for this....follow my instructions
Requirements
Download Android 10 stock firmware using SamFirm tool
Asif2828 said:
Well i have solution for this....follow my instructions
Requirements
Download Android 10 stock firmware using SamFirm tool
Click to expand...
Click to collapse
Please tell the instructions.
matrixology said:
Please tell the instructions.
Click to expand...
Click to collapse
Visit this site and flash the stock rom with Odin as instructed in the website
Search Androidsage site to how to flash stock firmware by using Odin
Has anyone found a solution to this issue. I experience the same after installing custom rom ETG3
themismar73 said:
Has anyone found a solution to this issue. I experience the same after installing custom rom ETG3
Click to expand...
Click to collapse
no solution so far. i even tried the latest firmware G965FXXSBETH8. But still IMEI status is NG and 'emergency calls only' appearing.
snarkygoblin092 said:
Hi everyone!
I recently tried out a new custom rom and it seems to have messed up my IMEI and serial number...
Also, it thinks I have a dual sim model, but it is single sim. Yet it still shows me that I have two slots.
.
Click to expand...
Click to collapse
Hello sir,
I'm in exact same situation as you. Will you please explain how did you manage to change the IMEI back to the original? I have lost my IMEI too. Both IMEI are 00000 .
andromuks said:
Hello sir,
I'm in exact same situation as you. Will you please explain how did you manage to change the IMEI back to the original? I have lost my IMEI too. Both IMEI are 00000 .
Click to expand...
Click to collapse
The only thing that helped was that I took it to a samsung repair station and got the motherboard replaced. Althought sometimes it forgets it has a sim card in it, but it works.
Are combination file for binary B out ?
snarkygoblin092 said:
The only thing that helped was that I took it to a samsung repair station and got the motherboard replaced. Althought sometimes it forgets it has a sim card in it, but it works.
Click to expand...
Click to collapse
How about these files?
Combination file : https://easy-firmware.com/index.php?a=downloads&b=file&id=301344
My issue fixed by @hainguyenthao. Thanks to him.
How ?? Tks
Anyone found a resolution?
savelbys said:
Anyone found a resolution?
Click to expand...
Click to collapse
I've tried everything I could find on the internet, but nothing worked... I had to get the motherboard replaced.
matrixology said:
My issue fixed by @hainguyenthao. Thanks to him.
Click to expand...
Click to collapse
Same for me! I searched the web for 4 days and have not found a solution!
I had no IMEI and my mobile data was not working, so he fixed the IMEI and my sim card + mobile data is working again.
Thank you very much! fixed by @hainguyenthao
/edit At the beginning he said I can install any custom rom I want (I wanted LineageOS/ArrowOS, so no stock based ROM) and that the fix is permanent, meaning I can reset the phone, do updates etc.
In the end, however, it looked quite different. I can neither use LineageOS, or ArrowOS. I can only use the stock based ROM from alexis. I can't do any updates. (not even security updates) I can't reset the phone, or switch to the stock ROM. When you do a simple wipe, mobile data is not working anymore. Really much trouble, installed several custom roms. Then I asked if an update would be possible (that's where he has to step in again, I can't do that by myself) and he said it wasn't sure if it would work. So now I am stuck on this build forever. High security risk. This is only a temporary solution and not worth it. I paid 30€. I bought a new phone and would recommend it to you guys as well. I will use the phone only for home without mobile data feature and install the latest stock rom.
has anyone find a solution for this?
Dear friends, i invite all of us to discuss this sore subject in a separate toric., and here's what so far I managed to find out.
My flashed Chinese device XQ-BC72 (flashed to Russian f/w) stopped getting OTA updates. Without thinking twice i flashed back device`s native Chinese f/w and after that OTA update was immediately recieved by my device (i flashed Chinese .31 f/w).
So how I managed to figure out, OTA update service is not breakes forever, it`s restored after flashing f/w with device`s native region.
Let's think together now how to fix it.
I'm wondering, if this could be because of Newflasher doesn`t flash persist.sin in new versions, and the traces of the firmware of its native region remain in the device ? I know that persist delete some verification keys and certificates, but, maybe, OTA service will remain ofter FULL f/w flashing with persist.sin file ?
What do you think ?
And one more the most important question !
DOES ANYONE FINALLY GOT THE OTA UPDATE ON ANY REFLASHED DEVICE ???
I MEAN REFLASHED FROM YOUR NATIVE F/W TO ANY ANOTHER ONE !
IS THERE AT LEAST ONE SUCH CASE ????
Same here, flashed SEA firmware with no OTA received now.
It's interesting that somebody reports that software version in software info (Dial #*#*7378423*#*#) shows GLOBAL-C2 after flashing, though mine is still SEA-C2 which matches my firmware version. Not sure if this related to the issue.
i7killpii said:
Same here, flashed SEA firmware with no OTA received now.
It's interesting that somebody reports that software version in software info (Dial #*#*7378423*#*#) shows GLOBAL-C2 after flashing, though mine is still SEA-C2 which matches my firmware version. Not sure if this related to the issue.
Click to expand...
Click to collapse
Global C2 - Hong Kong. There are two ways for you to see Global C2 in software info is to flash HK f/w or to buy the device from HK.
Didn't have this device but would like to ask you guys, If the OTA is dead then is the "check update" option in Xperia Companian still work or not?
Persist.sin shouldn't have anything to do with it. I always delete them before flashing with older models using both Flashtool and Newflasher and it never breaks OTA.
Wonder if this issue could be related to a bootloader bug in this device that many people here encountered a bootloop when finished flashing and had to mess with active partition slot to get fixed? I remembered that the a/b partition slot is related to system update and OTA too.
Nimda01 said:
Didn't have this device but would like to ask you guys, If the OTA is dead then is the "check update" option in Xperia Companian still work or not?
Persist.sin shouldn't have anything to do with it. I always delete them before flashing with older models using both Flashtool and Newflasher and it never breaks OTA.
Wonder if this issue could be related to a bootloader bug in this device that many people here encountered a bootloop when finished flashing and had to mess with active partition slot to get fixed? I remembered that the a/b partition slot is related to system update and OTA too.
Click to expand...
Click to collapse
I think you are right, if the new flasher only flash to slot a (so that we need to set a to be active) then OTA update is not available since the update will be to slot b which is a different version of software. We can verify this by using the new flasher twice once for slot a (set a active) and once for slot b (set b active). Just a guess, it might destroy your phone!
I bought my Xperia 1 iii from Hong Kong (XQ-BC72), and used newflasher to flash the software of the US version of the device thinking that it may solve the issue of not having 5G working and VOLET in my country, Saudi Arabia.
Unfortunately nothing changed, so I decided to re-flash the original software of the device HK (61.0.A.11.92).
Now, I get the OTA software update as you can see in the attachments, but it stops immediately after beginning of the installation process.
I hope this is beneficial information and let's all work to try to find a solution for this issue.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mansour Nejer said:
I bought my Xperia 1 iii from Hong Kong (XQ-BC72), and used newflasher to flash the software of the US version of the device thinking that it may solve the issue of not having 5G working and VOLET in my country, Saudi Arabia.
Unfortunately nothing changed, so I decided to re-flash the original software of the device HK (61.0.A.11.92).
Now, I get the OTA software update as you can see in the attachments, but it stops immediately after beginning of the installation process.
I hope this is beneficial information and let's all work to try to find a solution for this issue.
View attachment 5421925
View attachment 5421923
View attachment 5421921
View attachment 5421919
Click to expand...
Click to collapse
Hmmm...
Well, when i found out that OTA system stop working on non-native f/w, i re-flashed my device to it native China f/w, and after that it recieved OTA update immediately after i started flashed device and set it up, and update installed with no problem then.
Now my device is still on that f/w ....92, and it`s not recieved new update yet (...14.3) , when the phone will get this update, i`ll try to install it as usual, and i`ll report how did everything go, hope it will work well.
You know what, try to restore your device with Xperia Companion, i did so. Maybe OTA not working well because of changed slot (you changed it before flashing, right ?), and when you recover your device with Companion, maybe it will set all by default as it is necessary for everything to work correctly
[email protected] said:
I think you are right, if the new flasher only flash to slot a (so that we need to set a to be active) then OTA update is not available since the update will be to slot b which is a different version of software. We can verify this by using the new flasher twice once for slot a (set a active) and once for slot b (set b active). Just a guess, it might destroy your phone!
Click to expand...
Click to collapse
Already tested that flashing without changing to slot A will brick the phone. When my device was flashed Russian version of f/w, which is NOT native for my device, i tried to change the slot from A to B, and i did it, but after that all still the same, device didn`t get OTA updates.
So i had to reflash China rom again, and restored after that device with XC.
DennisDD78 said:
Hmmm...
Well, when i found out that OTA system stop working on non-native f/w, i re-flashed my device to it native China f/w, and after that it recieved OTA update immediately after i started flashed device and set it up, and update installed with no problem then.
Now my device is still on that f/w ....92, and it`s not recieved new update yet (...14.3) , when the phone will get this update, i`ll try to install it as usual, and i`ll report how did everything go, hope it will work well.
You know what, try to restore your device with Xperia Companion, i did so. Maybe OTA not working well because of changed slot (you changed it before flashing, right ?), and when you recover your device with Companion, maybe it will set all by default as it is necessary for everything to work correctly
Click to expand...
Click to collapse
Thank you for the advice... I will try to restore via Companion and report back to you if this solve my problem..
Mansour Nejer said:
Thank you for the advice... I will try to restore via Companion and report back to you if this solve my problem..
Click to expand...
Click to collapse
Good luck !
But you`ll not be able to check OTA untill next month, when next OTA update will roll out, right ?
DennisDD78 said:
Good luck !
But you`ll not be able to check OTA untill next month, when next OTA update will roll out, right ?
Click to expand...
Click to collapse
Thank you my friend.. Xperia Companion repair solved my problem and the new update installed on my phone now, but I guess you are right... I need to wait until the next update to see if OTA works...
Mansour Nejer said:
Thank you my friend.. Xperia Companion repair solved my problem and the new update installed on my phone now, but I guess you are right... I need to wait until the next update to see if OTA works...
Click to expand...
Click to collapse
Please feed me back on this next month if it`s not difficult for you and if you won`t forget
Today, I still can't update the software via OTA, I'm using China BC-72, however switched to SEA. i fixed it by Sony companion but my device was reset to chinese firmware
DennisDD78 said:
Already tested that flashing without changing to slot A will brick the phone. When my device was flashed Russian version of f/w, which is NOT native for my device, i tried to change the slot from A to B, and i did it, but after that all still the same, device didn`t get OTA updates.
So i had to reflash China rom again, and restored after that device with XC.
Click to expand...
Click to collapse
Did you actually flash to both slot A and B since I try the fastboot command to change slot I was not successful. The change slot command failed due to locked bootloader.
Friends, does anyboby knows exactly what`s happening with OTA sytem when device reflashed on non-native f/w ? What exactly breaks down in the device firmware ???
We tried an experiment, flashed Chinese device BC72 with Russian f/w on both slots, A, and then B, when active A, system boots, but no OTA recieved after that. When we set active B, then logo + bootloop. I repeat, f/w was flashed on both slots! When we returned slot A as active, device boots great, but still NO OTA.
HOW WE CAN FIX IT ?!
So far no success getting OTA after flashing different firmware. But i just update using new flasher so that i can enjoy the new patch and so far working for me. My data and settings are still intact so i think as of now this is the best solution. Mine originally china convert to SEA firmware..
spine6 said:
So far no success getting OTA after flashing different firmware. But i just update using new flasher so that i can enjoy the new patch and so far working for me. My data and settings are still intact so i think as of now this is the best solution. Mine originally china convert to SEA firmware..
Click to expand...
Click to collapse
me too exactly same as you cn flash over with SEA. do you update by just flash new flasher on top. Use flash all? or i need to delete something in order to not wipe data?
tanipat said:
me too exactly same as you cn flash over with SEA. do you update by just flash new flasher on top. Use flash all? or i need to delete something in order to not wipe data?
Click to expand...
Click to collapse
You need to delete 4 files so that it will be ome like OTA update, files are safe
spine6 said:
You need to delete 4 files so that it will be ome like OTA update, files are safe
Click to expand...
Click to collapse
is there a guide on XDA available to change region flash and keep files intact?
I would like to get SEA on my HK BC72.
Hi, does anyone know how I can flash the base, curt and preload of the p20 lite ane-lx3?
I got them with hisuite proxy but they give me an error when verifying update.
I need it because I can only go back to emui 8 from hi suite emui 9 does not appear, I had downloaded it to unlock the bootloader. I already unlocked them but I want to go back to the most updated emui or at least more than 9.1.0.142 since it still has the app drawer button.
I have seen that the multi tool 8 can be used to flash but I don't understand how to do it.
antonyx2016 said:
how I can flash the base, curt and preload of the p20 lite ane-lx3?
Click to expand...
Click to collapse
this can be done via modified TWRP, HuRupdater 0.4 or Multi-tool if you are running EMUI 9.1.
But these methods are risky when upgrading from 8.0 to 9.1 and are not recommended.
You can safely manually upgrade to 9.1 only by installing the service ROM using the dload method from the SD card.
What is your full build number? (settings > About phone).
Also check your vendor/country information via the Project Menu (*#*#2846579#*#*) and post the result.
Thank you for taking the time to respond, here I leave what you asked for. I would appreciate it if you could explain a little more how to do the process.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I thought you were currently on 8.0, sorry. So you can try the methods in my previous post.
For HuRupdater method use TWRP 3.2.1 "Gaguga edition".
Rename all three archives:
base -> update.zip
preload -> update_data_public.zip
cust -> update_all_hw.zip
It works on the P20 Pro, it should also work on the P20 Lite. Be aware that these methods are risky, especially when it comes to choosing the right firmware for your phone!
Personally, I prefer an update via eRecovery & wi-fi, or installing a service ROM via dload.
You can download Service ROM for your phone
Here
The dload process will erase all your data and lock your BL again!
-Alf- said:
I thought you were currently on 8.0, sorry. So you can try the methods in my previous post.
For HuRupdater method use TWRP 3.2.1 "Gaguga edition".
Rename all three archives:
base -> update.zip
preload -> update_data_public.zip
cust -> update_all_hw.zip
It works on the P20 Pro, it should also work on the P20 Lite. Be aware that these methods are risky, especially when it comes to choosing the right firmware for your phone!
Personally, I prefer an update via eRecovery & wi-fi, or installing a service ROM via dload.
You can download Service ROM for your phone
Here
The dload process will erase all your data and lock your BL again!
Click to expand...
Click to collapse
Good brief update: I tried all the stock roms of ane-l23 all with the same result in the case of emui 9 it stays at 9.1.0.046 and in emui 8 8.0.0.046 so far everything is fine after reading several forums here I have found one to see the files with root everything is fine up to here I enter /cust/hw and find two folders (la or latam) and normal. and in special cust only after all the props are fine, that is, it is 5.0.0.20.
Then looking for more information to see where the 8.0.0.046 was, I found it in version.prop. Additionally, enter splash2/cust.log and throw a lot of errors in the following post or answer. I leave you the images to see if we can solve something because the problem that bothers me is not being in emui 8 or 9 but that it is not so stable all that works if when installing any firm again the huawei id does not work first playstore and update hsm core after that everything works either themes etc etc.
but it lags a lot in emui 8 and in emui 9 google maps doesn't work so I don't care if I stay in emui 8 or 9 honestly but I do want the equipment to work correctly. Thank you very much for your willingness and willingness to help.
antonyx2016 said:
emui 9 it stays at 9.1.0.046 and in emui 8 8.0.0.046
Click to expand...
Click to collapse
It means wrong or incomplete FW. As I said before,
-Alf- said:
service ROM via dload.
You can download Service ROM for your phone
Click to expand...
Click to collapse
-Alf- said:
Here
Click to expand...
Click to collapse
Maybe you are doing something wrong...Follow instructions in ReleaseDoc folder.
antonyx2016 said:
I tried all the stock roms of ane-l23
Click to expand...
Click to collapse
you can only install the service ROM for your region (hw/la)!
But it is possible that with your current build number 9.1.0.046 you will not be able to flash via dload or eRecovery.
-Alf- said:
It means wrong or incomplete FW. As I said before,
Maybe you are doing something wrong...Follow instructions in ReleaseDoc folder.
you can only install the service ROM for your region (hw/la)!
But it is possible that with your current build number 9.1.0.046 you will not be able to flash via dload or eRecovery.
Click to expand...
Click to collapse
Yes I understand that, but what I wanted to say is that I already tried all the c605 firmware that there is, whether it is emui 8 and emui 9, they all install without error but apparently they do not install at all, I don't know if it is cust the oem partition or something like that but whatever the method, it always ends in .046 the only thing I know for sure is that it started to be like that a year ago when I used hisuite to go back and from there I could no longer update after what happened with hisuite I bought the code in dc to unlock the bootloader but I still can't remove the .046 in a few words hisuite screwed my phone xD because it was never rooted or unlocked until after what I told you
Okay, I don't know what the problem is, two last tips from me:
A) follow this method
https://ministryofsolutions.com/202...re-stock-rom-emui9-1-unlocked-bootloader.html
(reliable source)
B) rebrand to global version C432. But this requires downgrading to Oreo, and this is only possible through HiSuite (because there are no files needed for HuRupdater). It could help to get a fully working phone.
It could happen that before using hisuite you had a different region, not hw/la (claro/la etc.) hisuite couldn't recognize it and downgraded your phone to hw/la. Maybe you should try flashing oeminfo C605.
In fastboot mode run commands :
fastboot getvar vendorcountry
fastboot oem oeminforead-CUSTOM_VERSION
fastboot oem oeminforead-SYSTEM_VERSION
and post the result.
If you decide to rebrand, I will give you instructions.
-Alf- said:
If you decide to rebrand, I will give you instructions.
Click to expand...
Click to collapse
If that helps me, ok, I tried option a) it was installed but it is incomplete with the pink background. If doing a rebrand will help me, ok
antonyx2016 said:
with the pink background
Click to expand...
Click to collapse
Now try to flash Service ROM.
Also try enter eRecovery and use option "Download latest version...".
As for rebrand, I can't give you any guarantee.
-Alf- said:
Now try to flash Service ROM.
Also try enter eRecovery and use option "Download latest version...".
As for rebrand, I can't give you any guarantee.
Click to expand...
Click to collapse
I think I achieved it in a while I'll tell you what happened but I'm hopeful something changed with the hisuite proxy
Ok, let me tell you, I managed to install firmware 9.1.0.355. I know it's not the latest and it didn't free me from system component 9.1.0.040 either, but at least now everything works correctly.
I'll tell you what I did in case it helps someone else:
1- I did the point a) that you sent me
2- I kept the pink wallpaper and I went to the proxy hisuite and downloaded the cust, preload and base .355
3- it marked an error when installing in the 1% of hisuite the proxy already warned me that it was going to fail and to cancel
4- cancel it and deactivate the 3 checks of point, cust and preload
5-I put in developer mode and look for the update in hisuite
6- This time I no longer throw any errors and it was completely flashed. I imagine that because of step a) the cust was updated and that is why it allowed the .355 to be installed
7-it was still half incomplete but I went into settings and updated and I got the same .355 version and it was installed correctly in quotes as I said I still have the .40 system but everything works now I imagine that if you keep messing around a bit that way it will I could install the .390 but I'm satisfied with the .355