hi folks
when opened depeloper options, (idk why) i installed dsuu something then needed to reboot. and now its bootlooping. device is not rooted, i can use only official recovery menu, i wiped already no changes and im able to close the phone via recovery. can i fix my phone via some commands during recovery or any other suggestions?
thanks
UPDATE - Realme GT Convert China ROM to EU ROM OR Indin ROM
Hi These are the steps that were followed to make the global ROM work for you... Please follow the instructions step by step Try these steps at your own risk and I am not responsible for losing your phone or data 1- You must open the...
forum.xda-developers.com
Related
Hello there, I own a Moto E, Bought from the Indian supermart, Flipkart. I recently came across an LG G2 that runs on Cyanogen Mode 12. That shows the android version of 5.0.2. I then looked deeper and found that my.moto E can be rooted to the same ( or 12.1) OS alwell. So, I would like to root my device and install the mode. I. Kindly request you to provide me with the steps to safely root the device. I'm a newbie to android development and mods. So, please tell me things in the most basic level.
Thank you.
Shon
Firstly you'll have to note that rooting will void your warranty and you might end up bricking your phone (Though it usually doesn't happen while rooting)
Secondly... you should first search for your question in the forum itself since you're not the first person to encounter the problem...
Okay .. now to the rooting part...
To root your moto e..
You'll first have to unlock your bootloader which would result in deletion of all the data you have in your internal storage so you should backup your data first...
Go to this thread for the entire process of unlocking bootloader: http://forum.xda-developers.com/showthread.php?t=2753110
Next you'd want to flash a custom recovery. There are many custom recoveries out there.. most popular being cwm and twrp.. You can go for any recovery you like
In most cases.. the process to flash recovery is the same...
1. Download the particular recovery that you want to flash and rename it recovery.img... also note that while downloading... you check that it's for your device only...
2. Put it in the same folder as that of minimal adb and fastboot which i assume you downloaded while unlocking your bootloader
3. Enable USB Debugging in your phone from the Developer's options which can be unlocked by tapping on "Build number" a few times in About phone
4. Connect your phone to your pc with a USB cable
5. Open Minimal adb and fastboot
6. Type the following command 'fastboot flash recovery recovery.img' without apostrophes
If it says Ok.. then you have successfully flashed your custom recovery
Now you're finally gonna root your phone...
1. Download SuperSU from here https://download.chainfire.eu/451/SuperSU/UPDATE-SuperSU-v2.01.zip (DO NOT UNZIP)
2. Switch off your phone and reboot into bootloader by pressing first volume down.. then power button.. then releasing power button
3. Navigate to recovery by volume buttons and press power button to select
4. Select install or install from sd or something similar depending upon the recovery that you flashed
5. Select the super su zip file that you downloaded in first step
6. Flash it
7. Reboot
That's it.. your moto e is rooted now...
And like i said before... use the search bar before posting a question
(Press Thanks if i helped somewhow )
Firstly, Thank you for your valuable reply. I'd like to know a few more things about the process.. In this case, I'd like to set up cyanogen mode 12 on my XT1022. So after having my device rooted, what do I have to do? Do i have to download the ROM from the official cyanogen website? If so, can you please post a link to that file too?
And about the OS, I'd like to know,
*Will I be able to use both my sim cards? If not which sim card will I lose functionality?
*Will I be able to use Data ie, Edge and HSDPA through my sim card?
*Will I be able to use WiFi and Bluetooth?
*How will I Flash my original ROM back if I need?
Thank you for being patient.
lollipopmadman said:
Firstly, Thank you for your valuable reply. I'd like to know a few more things about the process.. In this case, I'd like to set up cyanogen mode 12 on my XT1022. So after having my device rooted, what do I have to do? Do i have to download the ROM from the official cyanogen website? If so, can you please post a link to that file too?
And about the OS, I'd like to know,
*Will I be able to use both my sim cards? If not which sim card will I lose functionality?
*Will I be able to use Data ie, Edge and HSDPA through my sim card?
*Will I be able to use WiFi and Bluetooth?
*How will I Flash my original ROM back if I need?
Thank you for being patient.
Click to expand...
Click to collapse
Sorry for the late reply.. I know you probably would've flashed it by now and trying out new different roms as well but i'd still post in case somebody stumbled upon this thread...
Yes you'd have to download the rom from the official cyanogenmod website
https://download.cyanogenmod.org/?device=condor&type=nightly
After downloading it.... Go into your recovery... Do a factory reset (It will delete all your data so backup your rom before doing so) .. Then install the rom and reboot... First reboot will take a lot of time so no need to worry if it doesn't boot up quickly...
Now to answer your questions...
Yes.. Everything is working fine with cm12 and i haven't really seen any big bugs or anything that would bother you since i myself am using it as a daily driver...
If you made a backup before installing the rom.. All you'd have to do would restore it and you'll go back into the same state with the previous rom installed... And if you didn't.. You'd have to install the stock firmware for which you can take help from this thread
http://forum.xda-developers.com/showthread.php?t=2759495
Hi my friends.
this is my story :
my phone is Redmi note 3 pro (qualqomm)
I got permissions for unlocking a week ago.
then i tried xiaomi website unlock method but it stopped at 50% and gave me couldn't verify device (different account) error.
my rom is global (MIUI 8) . then i tried to flash dev rom with updater app but it gave me couldn't verify update package error. i cleared updater data and tried again but same error.
in next step i tried mi pc suite to flash but no success.
then i used fastboot mode and mi flash and i got locked bootloader error.
then i used EDL mode to flash but in mi flash i got hello package error. (object reference not set to an instance of an object)
i completely confused . i tried all methods and read many fix like login in i.mi.com and other method that people fixed their problem but all of them not fix mine.
i read some threads about flashing twrp and root without unlocking bootloader but all of them need flashing dev rom and i can't flash.
can anyone help me?
x23are said:
Hi my friends.
this is my story :
my phone is Redmi note 3 pro (qualqomm)
I got permissions for unlocking a week ago.
then i tried xiaomi website unlock method but it stopped at 50% and gave me couldn't verify device (different account) error.
my rom is global (MIUI 8) . then i tried to flash dev rom with updater app but it gave me couldn't verify update package error. i cleared updater data and tried again but same error.
in next step i tried mi pc suite to flash but no success.
then i used fastboot mode and mi flash and i got locked bootloader error.
then i used EDL mode to flash but in mi flash i got hello package error. (object reference not set to an instance of an object)
i completely confused . i tried all methods and read many fix like login in i.mi.com and other method that people fixed their problem but all of them not fix mine.
i read some threads about flashing twrp and root without unlocking bootloader but all of them need flashing dev rom and i can't flash.
can anyone help me?
Click to expand...
Click to collapse
I just recently went through most of what you have gone through... Be patient though... It seems that the unlocking of bootloader even after you getting permission, takes atleast 2-3 weeks more.
- You can flash the miui global dev rom, you may download it from the miui forums... Here is the link for the fastboot rom http://en.miui.com/a-234.html.
- To flash the dev rom, you need to ensure you put your phone into fastboot, ensure all the fastboot drivers are installed on your computer
- Also, you need to ensure that you download the GLOBAL/DEV FASTBOOT ROM(this is different than the regular zip package) that you download.
- Then you can follow the instructions to install the ROM using miflash tool
- If the ROM installation is a success, then you just need to wait patiently atleast for 15-20 days from the time you got unlock permission sms from MI
- Then try running the flash unlock tool, it should get unlocked.
- Now flashing TWRP might be tricky, I was able to flash the official TWRP, but had issues where the internal memory wasn't getting mounted, because you keep getting asked for decryption password in TWRP to mount the data, no matter what you enter, it might not work
- After trying many TWRP types, the one that worked was "zcx twrp"
- Once you flash that, you should be able to flash any custom or miui roms you need :good:
GENiU5 said:
I just recently went through most of what you have gone through... Be patient though... It seems that the unlocking of bootloader even after you getting permission, takes atleast 2-3 weeks more.
- You can flash the miui global dev rom, you may download it from the miui forums... Here is the link for the fastboot rom http://en.miui.com/a-234.html.
- To flash the dev rom, you need to ensure you put your phone into fastboot, ensure all the fastboot drivers are installed on your computer
- Also, you need to ensure that you download the GLOBAL/DEV FASTBOOT ROM(this is different than the regular zip package) that you download.
- Then you can follow the instructions to install the ROM using miflash tool
- If the ROM installation is a success, then you just need to wait patiently atleast for 15-20 days from the time you got unlock permission sms from MI
- Then try running the flash unlock tool, it should get unlocked.
- Now flashing TWRP might be tricky, I was able to flash the official TWRP, but had issues where the internal memory wasn't getting mounted, because you keep getting asked for decryption password in TWRP to mount the data, no matter what you enter, it might not work
- After trying many TWRP types, the one that worked was "zcx twrp"
- Once you flash that, you should be able to flash any custom or miui roms you need :good:
Click to expand...
Click to collapse
tnx for reply but my problem is i cant flash.
my bootloader is locked and i cant flash fastboot rom.
therefor i must use edl mode or updater app but both of them don't work as a said in first post.
You don't need an unlocked BL to flash official fast boot miui ROMs
GENiU5 said:
You don't need an unlocked BL to flash official fast boot miui ROMs
Click to expand...
Click to collapse
mi flash show me : bootloader unlock in flashing process
x23are said:
mi flash show me : bootloader unlock in flashing process
Click to expand...
Click to collapse
You may try the steps on this link http://en.miui.com/thread-235865-1-1.html
Skip the EDL thing and go directly to the part where they explain how to use the miflash tool to flash a fastboot ROM
I should have asked this first... what's the state of your phone right now? Does it boot, stuck on boot loop, or are you able to boot into some ROM.
maybe u have a vendors rom, flash the fastboot rom using edl
finally a downloaded adb 1.4.3 and installed it and i flashed dev rom in EDL mode.
but now i have some questions:
can i change kernel with locked bootloader?
if i change kernel does fingerprint work?
You just dont have proper drivers installed im 100% sure, else it would go via edl
Hehe was right������
And why dont you ask for official unlock approval? Its approved in less than a day, anyone saying otherwise have old news
Or you can always use a method in this forum...
History:
1) I bought the phone in China and got it unlocked eventually
2) I got TWRP to work and then proceeded to install SuperSU via TWRP
3) This put me into "stuck" state (on Mi logo)
I obtained the following file: cancro_global_images_V8.1.4.0.MXDMIDI_20161201.0000.00_6.0_global_fcd6394ed1.tgz
and then tried to install it through the Mi flash tool which led to an error - "can not found file flash_all_except_storage.bat"
Note: If I can get my phone working I will probably just keep it stock this has been extremely frustrating and difficult. I have used the resources at XDA for years (thanks all you guys are great!) with my Samsung phones and have never had any issues at all but this has been completely different trying to mod my Xiaomi.
If any one can tell me how to fix my phone that would be great!
Note:
My phone has no OS on it atm (would like global rom if possible)
I would prefer not to lose the media files I have in storage
Have access to ADB command prompt and TWRP but cannot enter an OS (I tried to factory reset)
ntro said:
History:
1) I bought the phone in China and got it unlocked eventually
2) I got TWRP to work and then proceeded to install SuperSU via TWRP
3) This put me into "stuck" state (on Mi logo)
I obtained the following file: cancro_global_images_V8.1.4.0.MXDMIDI_20161201.0000.00_6.0_global_fcd6394ed1.tgz
and then tried to install it through the Mi flash tool which led to an error - "can not found file flash_all_except_storage.bat"
Note: If I can get my phone working I will probably just keep it stock this has been extremely frustrating and difficult. I have used the resources at XDA for years (thanks all you guys are great!) with my Samsung phones and have never had any issues at all but this has been completely different trying to mod my Xiaomi.
If any one can tell me how to fix my phone that would be great!
Note:
My phone has no OS on it atm (would like global rom if possible)
I would prefer not to lose the media files I have in storage
Have access to ADB command prompt and TWRP but cannot enter an OS (I tried to factory reset)
Click to expand...
Click to collapse
Try to follow this guide step by step
http://en.miui.com/thread-370620-1-1.html
ntro said:
History:
1) I bought the phone in China and got it unlocked eventually
2) I got TWRP to work and then proceeded to install SuperSU via TWRP
3) This put me into "stuck" state (on Mi logo)
I obtained the following file: cancro_global_images_V8.1.4.0.MXDMIDI_20161201.0000.00_6.0_global_fcd6394ed1.tgz
and then tried to install it through the Mi flash tool which led to an error - "can not found file flash_all_except_storage.bat"
Note: If I can get my phone working I will probably just keep it stock this has been extremely frustrating and difficult. I have used the resources at XDA for years (thanks all you guys are great!) with my Samsung phones and have never had any issues at all but this has been completely different trying to mod my Xiaomi.
If any one can tell me how to fix my phone that would be great!
Note:
My phone has no OS on it atm (would like global rom if possible)
I would prefer not to lose the media files I have in storage
Have access to ADB command prompt and TWRP but cannot enter an OS (I tried to factory reset)
Click to expand...
Click to collapse
Dude, that rom you downloaded is for Mi4 if i'm not wrong, and not for RDN 4.
Here is the link for the global stable ROM, which you need to flash in Fastboot mode. Select the "Redmi Note 4 MTK Latest Global Stable Version Fastboot File Download". You can use the same tutorial which they wrote you in previouse post. http://en.miui.com/a-234.html
Thanks all, finally found the right one it was the Nikel one that worked
hi
are u unlock bootloader or not ?
I need help urgently. I have a p20 lite ane-lx2 that had an update and got bricked. I tried the dload methot on my SD card but no luck keeps on telling me fail to do update. I have tried all the stuff on this forum with no sucsess.. Please please help my battery also does not charge the phone anymore since this happen.. I have read some stuff around that it can be done by adb tool. But I'm a noob.. I please need help I have taken it in to suppliers but they say they can't do anything.. I can boot up into download mode but goed to 5 persent then reboots.. Can go to recovery mode byt phone and frp is locked. And if I boot normally it just gets stuck to system apdate fail and error codes.. Please help
This answer have 2 solutions
1 st solution - using SP flash tool
download android oreo, ANE-L01C432B144 – 8.0.0.144 – Europe
https://www.getdroidtips.com/huawei-p20-lite-b144-oreo-update/
flash stock ROM via SP flash tool
https://flashingguide.com/huawei/how-to-flash-huawei-p20-lite/
---------------------------------------------------------------------------
2 nd solution - using fastboot (adb, terminal, manual, harder, but less likely can go wrong if you follow steps)
https://unofficialtwrp.com/huawei-p20-lite-root-twrp/
just skip step of rooting.
but you need unlocked bootloader:
https://unofficialtwrp.com/how-to-unlock-bootloader-on-huawei-phone-2019-working/
when you flash twrp you need to flash stock ROM via TWRP recovery
download android oreo, ANE-L01C432B144 – 8.0.0.144 – Europe
https://www.getdroidtips.com/huawei-p20-lite-b144-oreo-update/
open TWRP recovery and transfer downloaded stock ROM in phone and flash via TWRP
https://www.theandroidsoul.com/how-to-install-a-custom-rom-using-twrp-recovery/
and it should do just fine
--------------------
sorry if answer look too hard to understand, just follow instructions on links and my answer how to do it, and it will work
Hello all,
It's a long time that's i haven't post a thread here but i have a question.I have a Poco with MIUI Global 9.6 Stable (9.6.25.0) for ROM with a Android Version 8.1.0 OPM 171019.011 with root acces, unlocking bootloader and TWRP 3.3.0-0 installed.
I would upgrade my phone to something "newer" (A ROM with Android 12 if possible) and conserv the root access and my apps.
I have read that now ,we should have 3 files to do that (firmware,system and vendor) to make a wipe and install new ROM with TWRP.
So my question:
-Is it possible to upgrade Android 8.1.0 to Android 12 witn a new ROM? (i have read something about kernel in Android12 but haven't understand all)
-Have i missed some steps or just download files,boot TWRP,wipe and install newer ROM+firmware and vendor appropriate is good?
-Which ROM do you recommend?
Thanks for the previous answers.
devil1 said:
Hello all,
It's a long time that's i haven't post a thread here but i have a question.I have a Poco with MIUI Global 9.6 Stable (9.6.25.0) for ROM with a Android Version 8.1.0 OPM 171019.011 with root acces, unlocking bootloader and TWRP 3.3.0-0 installed.
I would upgrade my phone to something "newer" (A ROM with Android 12 if possible) and conserv the root access and my apps.
I have read that now ,we should have 3 files to do that (firmware,system and vendor) to make a wipe and install new ROM with TWRP.
So my question:
-Is it possible to upgrade Android 8.1.0 to Android 12 witn a new ROM? (i have read something about kernel in Android12 but haven't understand all)
-Have i missed some steps or just download files,boot TWRP,wipe and install newer ROM+firmware and vendor appropriate is good?
-Which ROM do you recommend?
Thanks for the previous answers.
Click to expand...
Click to collapse
It's not possible to switch from stock ROM to custom without doing clean install. You will have to root again.
First update to latest Official Stock ROM, then take backup of your files to your PC or to SDCard (if you have one) , flash to latest Official TWRP and check my POCO F1 Ultimate Collection & Guides. You can find everything there. I have awarded recommended ROMs in my collection.
Feel free to ask if you have any question regarding the guides.
Thanks for the answer.I have begin to read your guides.
If i understand good,it's not possible to conserv my root,unlock bootloader and twrp when i upgrade to android 12? Automaticaly i should root again my phone and restore with titanium backup my files,contact,....?
devil1 said:
Thanks for the answer.I have begin to read your guides.
If i understand good,it's not possible to conserv my root,unlock bootloader and twrp when i upgrade to android 12? Automaticaly i should root again my phone and restore with titanium backup my files,contact,....?
Click to expand...
Click to collapse
First you need to take backup of your files to PC or External SDCard.
Then you should update to latest version of MIUI via OTA if it's possible or via TWRP (you can use the stock recovery rom to do it via twrp). (You can also use my guides for clean install stock rom)
Then you should unlock your bootloader if it's not already unlocked.
Then flash latest Official TWRP.
Then flash latest firmware (not vendor) just to make sure you are on the latest. (You should be on latest firmware after updating to the latest MIUI version)
Then Wipe everything + format data according to my guides and flash the ROM you want. If you choose A12 Pixel Experience or crDroid keep in mind that these ROMs use their own recovery because these are encrypted by default ROMs and TWRP can't handle the decryption of A12 encrypted ROMs yet. So to make OTA updates and that stuff work correctly devs of these ROMs decide to use their own recovery which can handle the decryption of encrypted roms and as result to make OTA update work fine. Check the installation instructions of these roms in their threads. (Afterwards you can use adb sideload to flash stuff using these recoveries)
After that, flash Magisk since you want root.
Then you can restore titanium backup if you want.
OK i follow your instruction.Thanks
Hello retrial,
I have now updating my phone to MIUI Global 12.0.3 Stable with Android Version 10QKQ1.My phone is not yet rooted and now he is encrypted.The recovery is now Mi-Recovery 3.0
I have unlock again my bootloader.
Now to follow your instruction,i should flash the latest TWRP.
I have take TWRP-3.6.0_9-0-berylium in your guide.
I think i should do Fastboot Method because i'm now in Mi-Recovery?i'm right?
No problem with the encryption?
Thanks.
i have find this video.This is not the good phone but i think that the installation is the same:
devil1 said:
Hello retrial,
I have now updating my phone to MIUI Global 12.0.3 Stable with Android Version 10QKQ1.My phone is not yet rooted and now he is encrypted.The recovery is now Mi-Recovery 3.0
I have unlock again my bootloader.
Now to follow your instruction,i should flash the latest TWRP.
I have take TWRP-3.6.0_9-0-berylium in your guide.
I think i should do Fastboot Method because i'm now in Mi-Recovery?i'm right?
No problem with the encryption?
Thanks.
Click to expand...
Click to collapse
Yes use Fastboot Method to flash TWRP. No problem with encryption.
After that follow my clean install custom rom guide to flash the ROM you want. Also please check the instructions in the threads of ROMs you want to flash. A12 crDroid and PE use their own recoveries.
Basically tell me which ROM you want to flash to help you exactly with steps.
Hello retrial,
i have a problem to install TWRP-3.6.0-9-0 on my pocophone.Everything working fine but in step 8 of your guide,i can't find my twrp.img that i have copied in 2 different case to test :
8. Boot into Recovery by typing in cmd: fastboot boot <recovery_filename>.img (The file may not be named identically to what stands in this command, so adjust accordingly and write the full path of it, check the example below).
This command will not flash permantly the recovery, it will just temporary boot into it and afterwards you will flash permantly the twrp.img you copied into your Internal Storage or SDcard in recovery partition.
For example: fastboot boot C:\Users\Retrial\Desktop\twrp-3.5.2_9-0-beryllium.img
Have you an idea to why i cannot find my twrp.img in the boot mode?
devil1 said:
Hello retrial,
i have a problem to install TWRP-3.6.0-9-0 on my pocophone.Everything working fine but in step 8 of your guide,i can't find my twrp.img that i have copied in 2 different case to test :
8. Boot into Recovery by typing in cmd: fastboot boot <recovery_filename>.img (The file may not be named identically to what stands in this command, so adjust accordingly and write the full path of it, check the example below).
This command will not flash permantly the recovery, it will just temporary boot into it and afterwards you will flash permantly the twrp.img you copied into your Internal Storage or SDcard in recovery partition.
For example: fastboot boot C:\Users\Retrial\Desktop\twrp-3.5.2_9-0-beryllium.img
Have you an idea to why i cannot find my twrp.img in the boot mode?
Click to expand...
Click to collapse
Send a screenshot what you type in cmd and where you have the twrp.img
Or you mean you can't find it in your device while you are booted on TWRP?
i cannot find the twrp.img in my device.The step 8 of your tutorial.
I have copied the files but cannot find it in the cases.I have take TWRP-3.6.0-9-0
The link of the files: https://eu.dl.twrp.me/beryllium/twrp-3.6.0_9-0-beryllium.img.html
devil1 said:
i cannot find the twrp.img in my device.The step 8 of your tutorial.
I have copied the files but cannot find it in the cases.I have take TWRP-3.6.0-9-0
The link of the files: https://eu.dl.twrp.me/beryllium/twrp-3.6.0_9-0-beryllium.img.html
Click to expand...
Click to collapse
Are you sure you select Install Image?
ok i have download an other twrp.img and this time it's ok.i can go to the end of the tutorial but when i reboot my device mi-recovery 3.0 come back.I have tried 2 times but all the time mi-recovery3.0 come back
Have you an idea?
Should i take a additional command like in the video i have send you in the thread "fastboot flash recovery"?
devil1 said:
ok i have download an other twrp.img and this time it's ok.i can go to the end of the tutorial but when i reboot my device mi-recovery 3.0 come back.I have tried 2 times but all the time mi-recovery3.0 come back
Have you an idea?
Should i take a additional command like in the video i have send you in the thread "fastboot flash recovery"?
View attachment 5549731
Click to expand...
Click to collapse
I have all the steps on my guide. Please read it carefully. It boots back to mi recovery because you haven't flash TWRP yet just booted into. After boot into TWRP u need to flash twrp in recovery section so it will stay after reboot.
Please read the steps.
Download portable Minimal ADB and Fastboot and latest Official TWRP recovery.
Open cmd from minimal adb and fastboot and write:
fastboot boot and the path you have TWRP.
Example:
Code:
fastboot boot C:\Users\Retrial\Desktop\twrp-3.6.0_9-0-beryllium.img
Then proceed with the rest steps in my guide. Connect ur device to pc while u are booted into TWRP and copy TWRP.img to your device. Then in TWRP press Install Image and select the twrp.img u just copied into ur device. Select recovery and done.
I have made a video to show you what happened (sorry for the bad quality and the moove) :
I think a video is easyest to understand my problem.For information my bootloader is unlock and usb debugging ok.
devil1 said:
I have made a video to show you what happened (sorry for the bad quality and the moove) :
I think a video is easyest to understand my problem.For information my bootloader is unlock and usb debugging ok.
Click to expand...
Click to collapse
Hmm strange, probably of MIUI. Anyway since you are going to flash custom rom, when u flash twrp in recovery go back and select wipe and wipe everything (read my clean install guide), go back press format data type yes, and then reboot to TWRP.
EDIT: I just saw u rebooted to system. That's not what we want. Press reboot to recovery.
i reboot first to bootloader after have flash the twrp.img in recovery.That's only the second time that i reboot to system to use the normal mode of the phone and reboot after to recovery mode to show you that mi recovery is back.
devil1 said:
i reboot first to bootloader after have flash the twrp.img in recovery.That's only the second time that i reboot to system to use the normal mode of the phone and reboot after to recovery mode to show you that mi recovery is back.
Click to expand...
Click to collapse
The TWRP flashed correctly. You overlap it again by pressing reboot to recovery from MIUI updater.
Don't do that...do the combination to boot to TWRP after flashing it. Power+Volume Up.
And continue with clean install steps in my guide to flash custom rom.
In my guide I write nowhere to boot to MIUI and press from MIUI Updater reboot to recovery, please stick to my guide and you will be fine.
Poco f1 update not