hello, been noticing its difficult for me to get into recovery mode. x3 gt is vol up and power right? i press them tpgether but nothing happens... i had installed twrp and i was able to get into it just by a reboot aplication... otherwine once in a really long while, was i able to get into it... i need to get to twrp or stock recovery, eather one... but i fail, trying to install a custom rom gsi... need to format fter the installation
Related
Hello guys,
I'm sorry to bother you, apparently with some more newbie questions. I just got an SGS2 GT-I9100. Finding the right kernel, flashing it and rooting the phone was actually easier than rooting my HTC Desire. I also installed CWM Recovery through Rom Manager and flashed a custom ROM (CheckROM RevoHD) just to practice.
However, with my old HTC Desire, I have the option to boot into Booltloader by pressing volume down + power button. From there I can go to recovery, or reboot the phone or whatever (in case I have problems or want to perform nandroid backup/restore).
I was wondering if the same applies to SGS2? I've tried all combinations (vol up + vol down + power or vol up + home + power) but I can only go to download mode. I also flashed through Odin GT-I9100_OLD_BOOTLOADER.tar.md5 but nothing changed. Is there a bootloader mode at all for SGS2 like there is for my HTC.
If I mess things up flashing ROMs lets say, how am I supposed to get into recovery by using a combination of buttons?
Also I downloaded from the official website the clockwork touch recovery... a zip file named "recovery-clockwork-touch-5.8.1.5-galaxys2".
Can anybody please explain me very shortly how am I supposed to flash this file?
It is a zip file so Odin would not flash it. I tried to install it from clockwork recovery as zip file. It said "successful" but when i entered recovery again, its still the old non touch version.
Thanks in advance for your time and help... much appreciated.
Adrian.K said:
Hello guys,
I'm sorry to bother you, apparently with some more newbie questions. I just got an SGS2 GT-I9100. Finding the right kernel, flashing it and rooting the phone was actually easier than rooting my HTC Desire. I also installed CWM Recovery through Rom Manager and flashed a custom ROM (CheckROM RevoHD) just to practice.
However, with my old HTC Desire, I have the option to boot into Booltloader by pressing volume down + power button. From there I can go to recovery, or reboot the phone or whatever (in case I have problems or want to perform nandroid backup/restore).
I was wondering if the same applies to SGS2? I've tried all combinations (vol up + vol down + power or vol up + home + power) but I can only go to download mode. I also flashed through Odin GT-I9100_OLD_BOOTLOADER.tar.md5 but nothing changed. Is there a bootloader mode at all for SGS2 like there is for my HTC.
If I mess things up flashing ROMs lets say, how am I supposed to get into recovery by using a combination of buttons?
Also I downloaded from the official website the clockwork touch recovery... a zip file named "recovery-clockwork-touch-5.8.1.5-galaxys2".
Can anybody please explain me very shortly how am I supposed to flash this file?
It is a zip file so Odin would not flash it. I tried to install it from clockwork recovery as zip file. It said "successful" but when i entered recovery again, its still the old non touch version.
Thanks in advance for your time and help... much appreciated.
Click to expand...
Click to collapse
Your "boot into bootloader" is something similar to "boot into recovery" for the SGS2.
To boot into recovery mode, just press Volume UP + Home + Power buttons as long as recovery menu appears.
There you will find the options for normal reboot, backup and restore, wiping, fixing things, etc.
The bootloader itself in "open" for the SGS2. So no need to flash another bootloader.
Only if your are on Gingerbread (GB) and have a USB Jig to reset the flash counter, you have to flash the old GB bootloader.
If you want another ClockWorkMode (CWM) recovery, e.g. with touch recovery, then you need to flash a kernel containing this recovery.
For the SGS2, the recovery mode is build/contained in the kernel.
As long as you are on a custom ROM, you have to find a kernel, which is compatible with your ROM and containing the recovery mode you want to have.
Try SiyahKernel, as it is compatible for nearly all available ROMs and the latest (ICS) versions do have touch recovery.
Good luck !
It_ler said:
If you want another ClockWorkMode (CWM) recovery, e.g. with touch recovery, then you need to flash a kernel containing this recovery.
For the SGS2, the recovery mode is build/contained in the kernel.
As long as you are on a custom ROM, you have to find a kernel, which is compatible with your ROM and containing the recovery mode you want to have.
Try SiyahKernel, as it is compatible for nearly all available ROMs and the latest (ICS) versions do have touch recovery.
Good luck !
Click to expand...
Click to collapse
Dear It_ler,
Thank you so much for your explanations. Now everything is clear. Thanks.
By the way... I hope you guys really win the Euro2012 Best team around no doubts...
Hey guys -
I'm having trouble getting CWM Recovery to work with my YP-G70. I've rooted, installed ROM Manager, wiped data and partitions, installed Odin, Used Odin to (supposedly) flash the DD_01142012.tar recovery to the device. Everything looks successful, but when booting back up ROM manager only gives me the option to go to "recovery setup" instead of the normal flash option. Even when I reboot it in recovery, it just goes to the standard android recovery screen. Any ideas on how to fix this? It may be painfully obvious, this is my first root.
Hydraulix_93 said:
Hey guys -
I'm having trouble getting CWM Recovery to work with my YP-G70. I've rooted, installed ROM Manager, wiped data and partitions, installed Odin, Used Odin to (supposedly) flash the DD_01142012.tar recovery to the device. Everything looks successful, but when booting back up ROM manager only gives me the option to go to "recovery setup" instead of the normal flash option. Even when I reboot it in recovery, it just goes to the standard android recovery screen. Any ideas on how to fix this? It may be painfully obvious, this is my first root.
Click to expand...
Click to collapse
Rom Manager does not work for this device ( I think ) and you should not use it. "DD_01142012.tar" is not just a recovery, it's the kernel too. They are integrated. Flash it again and hold power and vol-up during boot up to get to recovery then flash your rom...
im on stock root and i wanted to hopefully flash a rom, but first i needed a custom recovery. On my phone, i downloaded Rom manager and it asked me to install cwm. it found my device and it downloaded and said installed successfully. i rebooted into recovery and from there it loops and boots into recovery non stop. i remove the battery and put it back in and it still tries to boot into recovery with the loop. (Semi-fix) when i remove my battery and boot into download mode. i can cancel it and it will skip trying to boot into recovery and load just fine. i can then shut down or restart as needed. but booting back into recovery will start the issue over again. i just want to know a safe way to have cwm on my note 3, or how to revert it back to normal. any help please?
scarface195894 said:
im on stock root and i wanted to hopefully flash a rom, but first i needed a custom recovery. On my phone, i downloaded Rom manager and it asked me to install cwm. it found my device and it downloaded and said installed successfully. i rebooted into recovery and from there it loops and boots into recovery non stop. i remove the battery and put it back in and it still tries to boot into recovery with the loop. (Semi-fix) when i remove my battery and boot into download mode. i can cancel it and it will skip trying to boot into recovery and load just fine. i can then shut down or restart as needed. but booting back into recovery will start the issue over again. i just want to know a safe way to have cwm on my note 3, or how to revert it back to normal. any help please?
Click to expand...
Click to collapse
Pull battery let it sit for two minutes. Push menu button, volume down button, and power button at the same time boot into download mode. once there flash a fresh copy of your OS which ever version of KitKat your running. You lose all your personal data, but your beyond that now. Then here is link to my thread should answer all your questions http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 enjoy !!!
uknow said:
Yeah ive said it a few times this should not be used
If youve bricked your phone you can get back into your phone by holding volume down menu botton and power botton at the same time when it pops up the warning screen to enter download mode hit cancel your phone will then boot up after your phone is on if you do not have a computer the way you fix the phone so you dont have to do this every time your phone is off you need mobile odin and a kitkat cwm.img.tar for our phone flash it and problem solved you can now boot into cwm recovery then if you want you can flash a twrp img zip through cwm or just keep cwm hope this helps
Ps if you Google mobile odin the dev gives it away on his xda mobile odin page
Click to expand...
Click to collapse
.............^^^^^^...........
stuck in recovery loop also
hi i am new to all this..i managed to get my sprint note 3 4.4.4 NK4 rooted and i read that i also needed a custom recovery so i used odin to install "philz_touch_6.08.7-hltespr.tar.md5" and it said success but when i tried to get into it it just says recovery is not seandroid enforcing i also used rom manager to get into it automatically but it just keeps looping saying same thing. is there a way out of this mess?
update-- i found an updated version of the philz tar file and installed it with odin and that got me out of the loop..just havent tried to get back into recovery yet...lol
Cat1970 said:
hi i am new to all this..i managed to get my sprint note 3 4.4.4 NK4 rooted and i read that i also needed a custom recovery so i used odin to install "philz_touch_6.08.7-hltespr.tar.md5" and it said success but when i tried to get into it it just says recovery is not seandroid enforcing i also used rom manager to get into it automatically but it just keeps looping saying same thing. is there a way out of this mess?
Click to expand...
Click to collapse
First, pull the battery for a minute then reinstall hold the power, menu, and volume down buttons at the same time and boot into download mode. The version of Phil'z CWM you flashed is to old for 4.4.4 NK4. Now download to your desktop the right Philz CWM recovery file (Phil'z_Touch_6.48.4-hlte.tar.md5 ) here is the link https://goo.im/devs/philz_touch/CWM_Advanced_Edition/hlte/ there are two listed use the second one. Flash with odin and you should be good to go. Go to my thread http://forum.xda-developers.com/note-3-sprint/general/samsung-note-3-rom-flashin-basics-t2896440 for more info.
done exactly as you said and the same screen came up saying recovery is not seandroid enforcing and then it jumps to Philz Touch 6 so im assuming everything is right now...i really appreciate the help! tyvm
different rom
ok..i installed cyanogen rom..i also used titanium backup..i want to go back to where i was but i dont see titanium backup on there anymore..how do i revert back?
i guess i need to update my phone n900p (help)
my rooted note 3 was running 5.0 L so i tried flashing a custom recovery both TWR and CWM now its stuck in boot loop. i read all the post showing you how to get out the bootloop. how ever i still need to put a recovery on my phone are there any updated links for this with odin because i was using the odin 3.0 sorry odin 307
Hi
A friend of mine asked me to help with his old phone. He wanted to hand his phone to his children, but he can't remember the passwort he entered once.
It is a complete stock phone. No ADB activated.
But the main problem is, that I can't enter recovery mode. I am very familiar with flashing phones and so on and know what to do, but I really can't enter the recovery mode. At least I can enter download mode (not as good as normaly, it often doesn't work, but I can).
Has somebody an idea how I can reset the phone with Heimdall or Odin? I also tried to flash a new recovery (CWM, CWM touch, stock) and the Stock ROM, but I still can't enter recovery mode (volume rockers seem to work, also home button) .
@Pflunz thats odd. So even flashing siyah kernel out of my head still doesnt allow you to boot into recoverymode? Because the S2 has recovery and kernel for system builtin.
Try to maybe flash gingerbread for the s2 first and it will probably work.
After you have flashed gingerbread and try to boot into system. If that works then you can root it and flash recovery. And boot into recovery from your rom.
You can do the same with jellybean stock instead of gingerbread. Read odin guide cause you can reflash stock with odin and it should be okay. Are you also flashing it for the right model?
I dont own anymore the S2 so I cant talk out of direct experience anymore.
I hope also for you that someone who is current in the s2 community can help you with this problem goodluck :good:
I have a little problem i can't access recovery when I press 2 factory buttons. I have it since i installed CM 11 V9. Now i want to install V11 but I'm afraid that it fails and i wont be able to do anything. I thought maybe installing TWRP will fix it but it didin't. I still can access recovery when my phone is on, when i restart into recovery. And when I still had CWM when i was trying to restart phone from recovery menu it said that I might have lost root access.
khazixstan said:
I have a little problem i can't access recovery when I press 2 factory buttons. I have it since i installed CM 11 V9. Now i want to install V11 but I'm afraid that it fails and i wont be able to do anything. I thought maybe installing TWRP will fix it but it didin't. I still can access recovery when my phone is on, when i restart into recovery. And when I still had CWM when i was trying to restart phone from recovery menu it said that I might have lost root access.
Click to expand...
Click to collapse
You really need to modify your post and subject, so people will understand which device you have. No one here will be able to help you otherwise.