Related
I had an unlocked bootloader with cm9 installed..
then i wanted stock rom so i followed a guide and relocked bootloader and restored original baseband and kernel..
but then when i start my phone then sony ericssion logo appears and it only keeps appearing and after that nothing happens..
i also tried flashtool again but when i try to flash something it says that flashing aborted.. plz help guys as soon as possible :crying::crying::crying::crying:
Hi bro, why and how did you restore your bootloader? Seem lots of similar cases
Try to unlock again. And try to reflash Stock Rom with SEUS. You don't have to relock bootloader to flash Stock Rom, in what guide, which you follow, you read that?
Sent from my X10i using xda premium
Dzufa said:
Try to unlock again. And try to reflash Stock Rom with SEUS. You don't have to relock bootloader to flash Stock Rom, in what guide, which you follow, you read that?
Sent from my X10i using xda premium
Click to expand...
Click to collapse
Hello Sir.. i dnt know which guide but i still wanted to restore bootloader.. i cannot unlock again because flashtool is not flashing any kernel to my phone.. Plz help.. i have successfully relocked bootloader and also installed stock kernel but after that i m nt having xrecovery to flash rom nor flashtool is working..:crying::crying::crying:
Bares said:
Hi bro, why and how did you restore your bootloader? Seem lots of similar cases
Click to expand...
Click to collapse
Hi bro.. i just wanted donut hd rom again and it was not flashing in unlocked bootloader so i relocked bootloaderusing s1 tool and flashtool but after that flashtool is not flashing any xrecovery or any kenel..:crying::crying::crying::crying:l
Rishabhj.official said:
Hi bro.. i just wanted donut hd rom again and it was not flashing in unlocked bootloader so i relocked bootloaderusing s1 tool and flashtool but after that flashtool is not flashing any xrecovery or any kenel..:crying::crying::crying::crying:l
Click to expand...
Click to collapse
Nope, donut HD can be flashed on locked/unlocked bootloader, u should know this.
The reason why i asked u how is : some users relock
their bootloader improperly, and it could brick the phone permanently.
Bares said:
Nope, donut HD can be flashed on locked/unlocked bootloader, u should know this.
The reason why i asked u how is : some users relock
their bootloader improperly, and it could brick the phone permanently.
Click to expand...
Click to collapse
Ohh.. u have any solution..??????
And ya also when start phone se logo appers.. but then nothing happens..
Plz help
Regards
Rishabhj.official said:
Ohh.. u have any solution..??????
And ya also when start phone se logo appers.. but then nothing happens..
Plz help
Click to expand...
Click to collapse
That is bricked phone, so i ask u again :
How you restore your bootloader? detail pls!
Flash stock rom using flash tool. If you can't get flash mode in normal way try this. Take off battery, connect USB to phone, pc, hold back button, insert battery. Good luck.
Bares said:
That is bricked phone, so i ask u again :
How you restore your bootloader? detail pls!
Click to expand...
Click to collapse
Hey thanks but today i went to a shop (Nanak communication) and get my phone repaierd he too
450 rupees and also he restored my phone by usking some SETOOL2...
Please Help Guys [Solved]
Rishabhj.official said:
Hey thanks but today i went to a shop (Nanak communication) and get my phone repaierd he too
450 rupees and also he restored my phone by usking some SETOOL2...
Click to expand...
Click to collapse
I'm really glad to heared that bro .
To unlock and restore our bootloader we need to
refert to Stock Rom and Kernel ( Official stock),
This is really safe and eassiest way, btw we absolutely no need to restore our bootloader unless for warranty purpose.
Congrate buddy
Hi all !
I'm happy to share my rootpack for Xperia XA Ultra Single Sim with you, thanks to @bobenthug for private test. Files are coming from .111 firmware but can be used on other versions.
Rootpack link: https://mega.nz/#!Jt5RwT4S!-EJtjo69tZ2jwCVHQyiDUeVZ_8iyMzWtlEIxviguXAc
Guide link: http://forum.xda-developers.com/xperia-xa/how-to/f31xx-how-to-root-xperia-xa-noob-t3430170
Have a nice day
rrvuhpg said:
Hi all !
I'm happy to share my rootpack for Xperia XA Ultra Single Sim with you, thanks to @bobenthug for private test. Files are coming from .111 firmware but can be used on other versions.
Rootpack link: https://mega.nz/#!Jt5RwT4S!-EJtjo69tZ2jwCVHQyiDUeVZ_8iyMzWtlEIxviguXAc
Guide link: http://forum.xda-developers.com/xperia-xa/how-to/f31xx-how-to-root-xperia-xa-noob-t3430170
Have a nice day
Click to expand...
Click to collapse
Great I'm gonna unlock my bootloader and test. Is twrp available?
Everything is working great. Im rooted and have xposed installed
This works for any single slim XA ultra? including the F3213? On any firmware?
Are there any written instructions?
Video instructions are hard to follow, especially 20 minute ones and the quality is pretty bad.
I still appreciate the work you put in though regardless.
Thanks.
Worked for me. . Just did it today, thanks rrvuhpg
Sent from my F3213 using Tapatalk
hi guys
please help me for root F3212 (dual) .
I could not find a valid source for the Root this Device.
Really Thanks for your help
Is this applicable for F3215?
PacketJ said:
Is this applicable for F3215?
Click to expand...
Click to collapse
F3215 is a single sim device, answer is yes.
PacketJ said:
Is this applicable for F3215?
Click to expand...
Click to collapse
I've got F3215 single sim, but it's not bootloader unlockable. Anybody know a workaround?
TIA
If i root it, will i be able to get ota updates from sony, like android 7.0?
Is there a sony firmware flashtool for pc and where do i find stock rom to be able to reflash if the device crash? Thx
AxiK. said:
If i root it, will i be able to get ota updates from sony, like android 7.0?
Is there a sony firmware flashtool for pc and where do i find stock rom to be able to reflash if the device crash? Thx
Click to expand...
Click to collapse
U not able to get ota updates from sony if rooted.
U can find stock fw if u get flashtool..xperifirm was integrate in flashtool and u can download fw from there..
f3213 rooted and twrp'ed!
After many hours of googling I finally took the chance and used these instructions to root my f3213. I was concerned that the threads referenced did not reference the f3213 specifically and they were several months old. However, it worked like a champ. Thanks to the OP.
hi , thanks for support rrvuhpg.
work fine.
can you make a new version .146?
thanks your support
and this kernel is included twrp?
my devices is f3215
HOW to root 36.0.A.2.146
HELLO
I have flashed FW release : 36.0.A.2.146,
*#*#7378423#*#* = bootloader unlock:Yes
The problem after i flash boot.img recovery.img (=succes) and flash supeSU.
i reboot my phone an he stuck on Boot animation , i have try wipe cache , dalvikcache, userdata but the problem remain the same
Before with .123 firmware version , i had no problem !
IF someone have a solution or a download link Sony Xperia XA Ultra(F3211). FW release : 36.0.A.2.123 for FRANCE
thank you
rhabhab said:
HELLO
I have flashed FW release : 36.0.A.2.146,
*#*#7378423#*#* = bootloader unlock:Yes
The problem after i flash boot.img recovery.img (=succes) and flash supeSU.
i reboot my phone an he stuck on Boot animation , i have try wipe cache , dalvikcache, userdata but the problem remain the same
Before with .123 firmware version , i had no problem !
IF someone have a solution or a download link Sony Xperia XA Ultra(F3211). FW release : 36.0.A.2.123 for FRANCE
thank you
Click to expand...
Click to collapse
Hi, there is no modified boot for 36.0.A.2.146 that's probably why you have a bootloop.
Download 36.0.A.2.123 firmware with Xperifirm inclued with Flashtool.
Just got this I think the bootloader is already unlocked
Sent from my F3213 using xda premium
mchlbenner said:
Just got this I think the bootloader is already unlocked
Click to expand...
Click to collapse
Try to boot in fastboot mode and enter "fastboot oem unlock" without quotes. If it returns an error with (not necessary) at the end you bootloader is already unlocked.
I used this guide to root and update to .114 for F3213 a long time ago. How do I update to latest and keep all my files and root now? I have TWRP, do I just need to flash something?
Help with rooting on: F3211 36.0.A.2.146
From what i understand from this thread, this boot image does not work for 36.0.A.2.146.
I have unlocked my bootloader and flashed twrp but as i try to boot into it (according to step 9 in the guide) my phone just goes black for 1 sec and then reboots normally. I gues that is what the boot image is for.
I cannot boot it directly from fastboot using the "boot" flag because it complains about bootloader even tho it is unlocked according according to *#*#7378423#*#* and according to fastboot itself, when i try to unlock it again it says "FAILED (remote: Not necessary)".
Basically the situation seems like the one you described in:
https://forum.xda-developers.com/xperia-xa/help/unlocked-bl-help-root-recovery-t3411573
When I flash a boot image I just get a boot loop. So I have flashed my phone back to stock using flashtool to: F3211 36.0.A.2.146 /R6 (nordic version). Could you provide a boot image for 36.0.A.2.146? Or could someone tell me how rooting can be done on this version or provide a link for an older version? As it seems that XperiFirm only has the latest version. I would be very grateful.
Thanks in advance.
Hi,
I have made a failed attempt to REBRAND my Honor 9 ROM from Chinese to EU one. After trying to restore my phone from TWRP (also failed due to some unknown reason), I am finding my phone's bootloader locked.
I have the unlock code with me, however since USB debugging is not enabled i run into the following error:
FAILED (remote: Command not allowed)
finished. total time: 0.016s
Any ideas on getting USB Debugging enabled via fastboot or adb ? I can't get past Huawei eRecovery.
Thanks
Rommco05 said:
Fastboot recognize phone?
Click to expand...
Click to collapse
Yes. When I type the command fastboot devices it shows me the serial number of the phone.
Rommco05 said:
So this problem has nothing with usb debbuging. Have your phone FRP? If yes is locked or unlocked?
Click to expand...
Click to collapse
The message at the fastboot screen is
PHONE Locked
FRP Locked
Rommco05 said:
So this problem has nothing with usb debbuging. Have your phone FRP? If yes is locked or unlocked?
Click to expand...
Click to collapse
It is the Chinese model STF-AL10. It did not have FRP lock. However after trying to restore from your TWRP backup it started giving these messages.
Rommco05 said:
omg my twrp backup is for STF-L09, EU model not for STF-AL10! DC Phoenix is tool (payed) which can probably help you unlock phone and repair it
Click to expand...
Click to collapse
Ok. I was just waiting for that validation. Will try the Dc unlocker
Rommco05 said:
omg my twrp backup is for STF-L09, EU model not for STF-AL10! DC Phoenix is tool (payed) which can probably help you unlock phone and repair it
Click to expand...
Click to collapse
Will the update.app of B120 work with D C Unlocker for STF-AL10?
Rommco05 said:
Really don't know, maybe is better to use original firmware for your model. This tool maybe can rebrand phone too
Click to expand...
Click to collapse
Any links for the full firmware of STF-AL10?
The rebrand forum had 3 files in HWOTA folder. Can you help me identify which files to use?
Rommco05 said:
Your model is STF-AL10C00? U need all 3 files
Click to expand...
Click to collapse
Yes STF-AL10COO.
Will the rebrand files work? I have all three of them.
Rommco05 said:
Your model is STF-AL10C00? U need all 3 files
Click to expand...
Click to collapse
As your Chinese model tries to install original firmware through Erecovery it should work.
letterio said:
As your Chinese model tries to install original firmware through Erecovery it should work.
Click to expand...
Click to collapse
I am going nuts trying to figure this out. So now finally, I am going to use the DC unlocker to unlock and flash L09 rebrand files on my AL10
Wish me luck!
raw_jay said:
I am going nuts trying to figure this out. So now finally, I am going to use the DC unlocker to unlock and flash L09 rebrand files on my AL10
Wish me luck!
Click to expand...
Click to collapse
Okay how do you like good luck
Success!!!!
Rommco05 said:
I'm never rebrand phone so I don't know, but I think DC unlocker can rebrand phones
Click to expand...
Click to collapse
I have finally managed to unbrick my phone. Thank you all for your continuous guidance and support.
How did YouTube unbrick your Phone Raw_Jay, il have the same problem... Please help...
redhah said:
How did YouTube unbrick your Phone Raw_Jay, il have the same problem... Please help...
Click to expand...
Click to collapse
He used a paid software called DC Phoenix
PalakMi said:
He used a paid software called DC Phoenix
Click to expand...
Click to collapse
YEAH, I DID IT !!!! With dc Phoenix.... I was stuck with my P8 lite bricked. Fastboot OK but No way to unlock bootloader because of OEM usb debug off.... So i payed 15 crédits on dc Phoenix to flash my P8 during 72hours... I get stock firmware from their support zone (Prague l31_c432B164 germany Portugal switzerland france. APP) and i flashed it with dc Phoenix and BINGO!!!! My P8 lite came back to life after 3 weeks of hard reading, searching, flashing, working.... Thank you Palakmi....
You're welcome
Requesting DC Phoenix account
redhah said:
YEAH, I DID IT !!!! With dc Phoenix.... I was stuck with my P8 lite bricked. Fastboot OK but No way to unlock bootloader because of OEM usb debug off.... So i payed 15 crédits on dc Phoenix to flash my P8 during 72hours... I get stock firmware from their support zone (Prague l31_c432B164 germany Portugal switzerland france. APP) and i flashed it with dc Phoenix and BINGO!!!! My P8 lite came back to life after 3 weeks of hard reading, searching, flashing, working.... Thank you Palakmi....
Click to expand...
Click to collapse
Can i have your dc phoenix account for 1 time use plz.. I am kind of stuck in same situation and my country not support payments.
I shall be very thankful to you?
I dont have any crédits now. ...sorry
Did a reboot and now is stuck at optimizing app logo.. it goes over and over.
What to do? How do I reset it?
man i have same problem..(
guys help us plz)
Darkxy1983 said:
Did a reboot and now is stuck at optimizing app logo.. it goes over and over.
What to do? How do I reset it?
Click to expand...
Click to collapse
Quattres said:
man i have same problem..(
guys help us plz)
Click to expand...
Click to collapse
Try a factory reset with adb:
Code:
adb reboot wipe
I’m tried , and via fast boot commands too, same result . Nothing happens , watch are rebooting , then again same **** .
May be I need find firmware ISO, but I can’t find
have you unlocked your watch?
1immortal said:
have you unlocked your watch?
Click to expand...
Click to collapse
nope, Im tried to do that too, by Amazfit Tool and by All-in-One-TOOl.
found info about Serial number, Bootloader version , and Amazfit Tool found OS version, BUT on https://unlockamazfit.com/ i have a message that i written wrong OS version. I dont know how to get right version to unlock.
Im also tried to find stock firmware ISO, but failed in that =(
Hi,
ihave used the latest ROM version stratos 2 2.3.11.0
Thanks
Quattres said:
nope, Im tried to do that too, by Amazfit Tool and by All-in-One-TOOl.
found info about Serial number, Bootloader version , and Amazfit Tool found OS version, BUT on https://unlockamazfit.com/ i have a message that i written wrong OS version. I dont know how to get right version to unlock.
Im also tried to find stock firmware ISO, but failed in that =(
Click to expand...
Click to collapse
This is Stratos3 Stock US/Global/International 4.2.2.1 firmware installer.
Make sure you have correctly installed adb/fastboot drivers and unlocked bootloader. Battery must be %40+.
https://www.mediafire.com/file/5v6jt2hwe54mysl/Stratos_Stock3_US_4.2.2.1_Firmware.zip/file
Tested by @Darkxy1983
burdag said:
Hi,
ihave used the latest ROM version stratos 2 2.3.11.0
Thanks
Click to expand...
Click to collapse
What?? You installed Stratos firmware in your Stratos 3 watch???
No i only write the OS version for unlock the bootloader.
Saratoga79 said:
This is Stratos3 Stock US/Global/International 4.2.2.1 firmware installer.
Make sure you have correctly installed adb/fastboot drivers and unlocked bootloader. Battery must be %40+.
https://www.mediafire.com/file/5v6jt2hwe54mysl/Stratos_Stock3_US_4.2.2.1_Firmware.zip/file
Tested by @Darkxy1983
What?? You installed Stratos firmware in your Stratos 3 watch???
Click to expand...
Click to collapse
can u plz upload firmware to another cloud service?
I have blocked mediafire at work =/
thx a lot
i'm unlocked the bootloader already
Quattres said:
can u plz upload firmware to another cloud service?
I have blocked mediafire at work =/
thx a lot
i'm unlocked the bootloader already
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=4349826312261649290
Saratoga79 said:
This is Stratos3 Stock US/Global/International 4.2.2.1 firmware installer.
Make sure you have correctly installed adb/fastboot drivers and unlocked bootloader. Battery must be %40+.
https://www.mediafire.com/file/5v6jt2hwe54mysl/Stratos_Stock3_US_4.2.2.1_Firmware.zip/file
Tested by @Darkxy1983
What?? You installed Stratos firmware in your Stratos 3 watch???
Click to expand...
Click to collapse
Quattres said:
can u plz upload firmware to another cloud service?
I have blocked mediafire at work =/
thx a lot
i'm unlocked the bootloader already
Click to expand...
Click to collapse
downloaded ROM, tryed to Flash in Fastboot by .bat file, so result - "Too many links" and error, then bootloop starts again?
how to do that correct? mb i need to unbrick first?
Quattres said:
downloaded ROM, tryed to Flash in Fastboot by .bat file, so result - "Too many links" and error, then bootloop starts again?
how to do that correct? mb i need to unbrick first?
Click to expand...
Click to collapse
That's not an error, it's the output when booting the modded recovery in fastboot, and it's ok. After that you should see the ! symbol in watch and the installer should start copying the files to the watch
What do you get in the installer?
Quattres said:
downloaded ROM, tryed to Flash in Fastboot by .bat file, so result - "Too many links" and error, then bootloop starts again?
how to do that correct? mb i need to unbrick first?
Click to expand...
Click to collapse
I can confirm the firmware works. Had the same problem and after ROM flash everything works.
I had unlocked my watch first with one in all tool. Maybe that can help you to flash the ROM.
How flashing looks in steps:
https://photos.app.goo.gl/db1yUsyuudcBFgWd6
https://photos.app.goo.gl/egvEwji1e9SzVMKq6
Saratoga79 said:
That's not an error, it's the output when booting the modded recovery in fastboot, and it's ok. After that you should see the ! symbol in watch and the installer should start copying the files to the watch
What do you get in the installer?
Click to expand...
Click to collapse
Darkxy1983 said:
I can confirm the firmware works. Had the same problem and after ROM flash everything works.
I had unlocked my watch first with one in all tool. Maybe that can help you to flash the ROM.
How flashing looks in steps:
https://photos.app.goo.gl/db1yUsyuudcBFgWd6
https://photos.app.goo.gl/egvEwji1e9SzVMKq6
Click to expand...
Click to collapse
Dude thx a lot, I just downloaded ROM, unpacked in C: and run fast boot from folder,then the flashing started! Thx!!!
Saratoga79 said:
This is Stratos3 Stock US/Global/International 4.2.2.1 firmware installer.
Make sure you have correctly installed adb/fastboot drivers and unlocked bootloader. Battery must be %40+.
https://www.mediafire.com/file/5v6jt2hwe54mysl/Stratos_Stock3_US_4.2.2.1_Firmware.zip/file
Tested by @Darkxy1983
Click to expand...
Click to collapse
I assume this can be used to flash China version A1928 to Global version as long as the bootloader has been unlocked using https://unlockamazfit.com/ ?
evilhomura89 said:
I assume this can be used to flash China version A1928 to Global version as long as the bootloader has been unlocked using https://unlockamazfit.com/ ?
Click to expand...
Click to collapse
It's not tested yet. I recommend you waiting to have a firmware dump of the Chinese version just in case, or if you are really interested and you own the Chinese model, help providing the firmware dump I can provide a Windows tool to do that.
Saratoga79 said:
It's not tested yet. I recommend you waiting to have a firmware dump of the Chinese version just in case, or if you are really interested and you own the Chinese model, help providing the firmware dump I can provide a Windows tool to do that.
Click to expand...
Click to collapse
Hi Saratoga, may I know where can I get the firmware dump? I have the Chinese model of Stratos 3, and I was planning to install the US firmware version above.
jazyen27 said:
Hi Saratoga, may I know where can I get the firmware dump? I have the Chinese model of Stratos 3, and I was planning to install the US firmware version above.
Click to expand...
Click to collapse
I posted the link few post above.
But as I said before, just in case something goes wrong, those with a Chinese model may collaborate to get a dump of the Chinese firmware from their whatc just in case they have to go back to stock/original firmware.
This is just a precaution, because if for some reason the US firmware doesn't work in the Chinese model, nowadays there is no way to restore the watch, that's why I'm asking for the Chinese firmware dump help.
I think jazyen27 thought , how to read dump from watch.........
I can provide a Windows tool to do that.
Click to expand...
Click to collapse
As the title says fix for unlock tool that reboots without unlocking the bootloader for converted tencent phones to WW i don't know if someone posted any fix for this because i searched and didn't saw anything
what we need to do is so simple
download latest ww version from asus i used 2008.78 so better to update to this version as it worked for my tencent converted model then try to unlock bootloader again and thank me later :fingers-crossed:If it didn't work try 3-4 times because it worked for me Second time good luck out there :silly:
2008.78 link:
https://dlcdnets.asus.com/pub/ASUS/...S_I003_1-ASUS-17.0823.2008.78-1.1.63-user.zip
Does this work?
Therazorsedge said:
Does this work?
Click to expand...
Click to collapse
Bruh does ppl post something that doesn't work?
Yes
Hi can give me link for software 2008.78
Sent from my [device_name] using XDA-Developers Legacy app
alolbedoo said:
Hi can give me link for software 2008.78
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
https://dlcdnets.asus.com/pub/ASUS/...S_I003_1-ASUS-17.0823.2008.78-1.1.63-user.zip
shahram Ali said:
https://dlcdnets.asus.com/pub/ASUS/...S_I003_1-ASUS-17.0823.2008.78-1.1.63-user.zip
Click to expand...
Click to collapse
working fine now unlocking bootloader thanks who i can make root
shahram Ali said:
https://dlcdnets.asus.com/pub/ASUS/...S_I003_1-ASUS-17.0823.2008.78-1.1.63-user.zip
Click to expand...
Click to collapse
i need boot.img for 2008.78
alolbedoo said:
i need boot.img for 2008.78
Click to expand...
Click to collapse
Use twrp bro i just used twrp and couldn't find any patched boot.img and the super.img is pain in the @$$ to extract so i used twrp took me 4 minutes to root with twrp:highfive:
shahram Ali said:
Use twrp bro i just used twrp and couldn't find any patched boot.img and the super.img is pain in the @$$ to extract so i used twrp took me 4 minutes to root with twrp:highfive:
Click to expand...
Click to collapse
thanks working fine now :good:
alolbedoo said:
thanks working fine now :good:
Click to expand...
Click to collapse
Happy to help
Which tool exactly you're ising guys to unlock?
cultofluna said:
Which tool exactly you're ising guys to unlock?
Click to expand...
Click to collapse
The official Asus bootloader unlock tool (which Asus annoyingly keeps switching between different regions' websites).
Try your luck with Asus USA/ Canada/ Philippines/ Taiwan/ China. For now, it is available here:
https://rog.asus.com/us/phones/rog-phone-3-model/HelpDesk_Download
or
https://dlcdnets.asus.com/pub/ASUS/..._SIGNED_UnlockTool_9.3.0.0_200820_fulldpi.apk
(Also, attached is the .apk file from above source in case it gets taken down again.)
Guys i can't explain what happen i have Asus rog 3 tencent with ww rom installed by the seller i manually update to the lastest rom 17.0823.2009.99, tried to unlock the bootloader with that apk file and i it worked now i have my asus unlocked Niceee i can confirm it's possible
shahram Ali said:
As the title says fix for unlock tool that reboots without unlocking the bootloader for converted tencent phones to WW i don't know if someone posted any fix for this because i searched and didn't saw anything
what we need to do is so simple
download latest ww version from asus i used 2008.78 so better to update to this version as it worked for my tencent converted model then try to unlock bootloader again and thank me later :fingers-crossed:If it didn't work try 3-4 times because it worked for me Second time good luck out there :silly:
2008.78 link:
https://dlcdnets.asus.com/pub/ASUS/...S_I003_1-ASUS-17.0823.2008.78-1.1.63-user.zip
Click to expand...
Click to collapse
hi please how i can install this rom?? please
Hunar999 said:
hi please how i can install this rom?? please
Click to expand...
Click to collapse
This is not a ROM.
It is the official ASUS tool for unlocking the ROG3 bootloader!
Hunar999 said:
hi please how i can install this rom?? please
Click to expand...
Click to collapse
As elmor said this is not a rom bro if you are Kurdish just dm me