i wanted to flash custom rom AOSPEXTENDED v9 then after sideloading the rom and rebooting got Qualcomm Crashdump Mode. how to fix that
I used MsmDownloadTool to flash the original oxygen rom. Install Qualcom driver and plug in the phone it should get recognised in tool.
dfm000 said:
i wanted to flash custom rom AOSPEXTENDED v9 then after sideloading the rom and rebooting got Qualcomm Crashdump Mode. how to fix that
Click to expand...
Click to collapse
Same happened with me. Just don't try AOSP Rom. Use Msm tool to install stock OP Rom.
Related
Hello.
I am owning Tracer Oxygen GS4 and phone is stuck on tracer logo screen.
I am trying to flash rom via fastboot or stock recovery but it isn't working and i can't get into download mode to flash rom via flashtool, can someone tell me how to get into download mode?
mario323 said:
Hello.
I am owning Tracer Oxygen GS4 and phone is stuck on tracer logo screen.
I am trying to flash rom via fastboot or stock recovery but it isn't working and i can't get into download mode to flash rom via flashtool, can someone tell me how to get into download mode?
Click to expand...
Click to collapse
Where did you get firmware ?
Use SP Flash Tool v5.1352.01 to install rom
Hi guys,
sorry for my bad english.
I have a problem. I have unofficial unlocked my bootloader, install TWRP and then CM13 from Santhosh M.
I'm very happy with this ROM, but now i can official unlocked my bootloader and i will try out MIUI from xiaomi.eu.
Please were can me say how i can back to original MIUI ROM, unlocked my bootloader official, install TWRP and then MIUI from xiaomi.eu?
I'm very happy about your answers!
Greetings from germany
Ben
go in fastboot and flash a ufficial developer rom from xiaomi with mi flash, you need to ddownload the tgz rom
Here is the Xiaomi.eu miui ROM discussion forum.
Check this out. http://forum.xda-developers.com/redmi-note-3/how-to/xiaomi-eu-rom-discussion-thread-t3373714
Thank you for your answers. I have flash the CM13_radio.zip, is this a problem? I will not brick my phone...
[email protected]@min said:
Thank you for your answers. I have flash the CM13_radio.zip, is this a problem? I will not brick my phone...
Click to expand...
Click to collapse
Nope, it's not a problem.
1. Download the fastboot ROM and MiFlash
2. Enter EDL mode.
3. Flash the ROM with MiFlash (if u have problems with stable version, just install the beta one).
I dont know why...but it not work!
When i go in fastboot mode and flash with miflash the official developer rom it says "Critical partition flashing is not allowed"!
When i go in edl mode and flash with miflash the rom it says "Open Serial Port COM 3: Failed"!
The adb driver is correctly installed but in device manager it is a yellow error on the device.
I think the reason is because i have now a marshmallow bootloader from CM13, and not a lollipop bootloader from MIUI. Is this correct?
What can i do? Please help me!
[email protected]@min said:
I dont know why...but it not work!
When i go in fastboot mode and flash with miflash the official developer rom it says "Critical partition flashing is not allowed"!
When i go in edl mode and flash with miflash the rom it says "Open Serial Port COM 3: Failed"!
The adb driver is correctly installed but in device manager it is a yellow error on the device.
I think the reason is because i have now a marshmallow bootloader from CM13, and not a lollipop bootloader from MIUI. Is this correct?
What can i do? Please help me!
Click to expand...
Click to collapse
Before flashing,did u disable drivers signature enforcement in windows???thats required!!
im on cm 13 by santhosh
when i try to flash latest global rom through fastboot/edl using miflash flashing process is completing successfully but sim, wifi, bluetooth, imei are gone
again i have to install twrp to restore them
how can i move to fully factory condition
thanks
Regards
yemjala kumar
ashokumar257 said:
im on cm 13 by santhosh
when i try to flash latest global rom through fastboot/edl using miflash flashing process is completing successfully but sim, wifi, bluetooth, imei are gone
again i have to install twrp to restore them
how can i move to fully factory condition
thanks
Regards
yemjala kumar
Click to expand...
Click to collapse
I have the same problem! How do you flash twrp to restore cm image??
areq1987 said:
I have the same problem! How do you flash twrp to restore cm image??
Click to expand...
Click to collapse
unlock boot loader-->flash twrp through fast boot-->restore backup
If you are coming from MM do not directly flash MIUI 5.1 first restore the old backup of MIUI because some users had lost their IMEI.TC
Firstly, I try to unlock the bootloader and flash cm14 rom with the unofficial method (without applying from the mi.com). Unfortunately, it becomes soft brick. then I make the deep flash cable to enter the 9008 mode and use mi flash tool to flash the miui rom in it. However, after successful flashing, the mobile either cannot open or just showing mi logo for forever. I have tried at least 10+ miui rom (global, chinese and develop with different versions). Even I exchange the recovery .img to try to enter the twrp, it still cannot enter, I duno what is the problem, finally, i download a Rom and flash it, I can enter the recovery (twrp) but still cannot enter the miui. Now I can flash cm14.1 in it. But I just wanna know why? i have searched many posts saying taht just enter 9008 mode and flash the miui rom and everything is ok, but what i get is bootloop or dead.
turn off driver signature while flashing miui official rom
Simoom Sadik said:
turn off driver signature while flashing miui official rom
Click to expand...
Click to collapse
I did turn off on several trial of flashing, and the result is the same.
i am wondering if there is any lock by xiaomi to prevent flashing with the latest rom. That means after flashing the latest rom, your phone will be locked and no more other official rom can be flashed using 9008 method.
Hi, I'm hoping someone can offer some assistance. I have an Elephone P9000 (normal version NOT lite) that has official Android 7.0 and I want to install LineageOS 14.1.
As per the instructions I used SP Flash Tool to downgrade the phone to Android 6 (Elephone_P9000_20170112) which worked fine.
I then attempted to install TWRP 3.2.1.0 which also appeared to work ok as I could boot into TWRP recovery and all looked good. However when I tried booting the phone normally it stuck at the white boot logo and would not progress any further.
So I reloaded the Elephone_P9000_20170112 rom again with SP Flash Tool after which the phone would boot normally and then tried installing TWRP 3.0.2.8 as I'd seen threads saying that this version definitely worked with the P9000. However this produced the same result that I could boot into TWRP fine but it would get stuck at the boot logo if I tried booting the phone normally.
I have also tried re-installing the ROM but unticking the recovery option in SP Flash Tool hoping that this would leave the working TWRP intact but this didn't work either.
When I try to boot into recovery I get the little Android laying down with a red exclamation mark.
So I don't know where to go now. I can get EITHER Android to boot or TWRP to boot but not both.
Just in case it is relevant, I am using SP Flash Tool v5.1804_Win in Windows 7 32bit. I don't have any SIM's in the phone and no SD card inserted.
Can someone point me in the right direction please.
Thanks
Russell
Try flashing stock rom with 810 at the end then twrp 3.2.1 and then aokp it is better then lineage
aljoscha81 said:
Try flashing stock rom with 810 at the end then twrp 3.2.1 and then aokp it is better then lineage
Click to expand...
Click to collapse
Thanks very much, that worked fine and AOKP looks really good. When it said install the latest Android v6 it obviously means the previous latest not the current latest
Just in case anyone else is having the same trouble I was:
Using SP Flash Tool load the 20160810 ROM available here: https://forum.xda-developers.com/elephone-p9000/development/rom-elephone-p9000-20160810-t3445897
Then, also using SP Flash Tool, load TWRP v3.2.1 which is available from here: https://eu.dl.twrp.me/p9000/
Then you can use the TWRP recovery to load whichever ROM you like (LineageOS, AOKP etc, etc)
Once again, thanks very much for your help.
:good:
hi
i am on miui 10 beta andriod pie.
i tried to flash twrp recovery .
but phone turns black from fastboot mode.
please help me.
Please install adb and fastboot driver at pc.... Enable usb debugng option in develpr option
I have previously flashed different rom long ago with the same pc
After updating to version 8.11.29 I also have the same and now do not reset twrp
i am having a wierd isuue with recovery
twrp is always geting replaced by stock recovery
Balaji Dasari said:
i am having a wierd isuue with recovery
twrp is always geting replaced by stock recovery
Click to expand...
Click to collapse
It is not weird at all. Only custom ROMs come without built in recovery and so they won't overwrite TWRP. Stock ROMs always come with built-in recovery which will overwrite TWRP.
The solution is to flash TWRP again after flashing the ROM and before booting to system. For good measure, after flashing TWRP, flash Magisk and your TWRP will remain.
Thread moved to the correct section.
Lupin The Third
Forum Moderator
finally able to flash
Balaji Dasari said:
hi
i am on miui 10 beta andriod pie.
i tried to flash twrp recovery .
but phone turns black from fastboot mode.
please help me.
Click to expand...
Click to collapse
hey there i was going through same problem for me it worked when i changed the usb port .....if it helps try changing the port or use the multi ports