Alright, so I tried to install ResurrectionRemix on my rooted Vibe K5 (SD415) using this guide, however after rebooting to system, it gets stuck on the Lenovo logo forever, and the only way I can power off the device is to remove the battery. Holding Volume Up + Power doesn't boot me into recovery, and only Volume Down + Power works to boot me into fastboot. The only way I can access TWRP is by plugging the phone into my PC and booting the TWRP image file using cmd. I also thankfully have a nandroid backup from before trying this. Is it safe to restore the backup? If yes, is there any way I can make RR (or any other ROM for that matter) work without causing a bootloop?
Thanks in advance.
Related
I bought a Galaxy Note 5 Clone from DhGate. I installed cyanogenmod 12.1 and it is stuck in a boot loop. There is no download mode, I tried volume down, home, and power. I even used adb to get into download mode and all it did was reboot back into the boot loop. I have no backup, no way of putting the stock rom on my phone, and no way of using Odin or SP flash tool. What do I do.
Hi all
I was trying to install lineage os 13 on mipad but unable to do so. So i wiped everything except internal, sd and otg and then restored a backup i created earlier from twrp. When i did reboot to system mipad got stuck at logo. I am a newbie. Please help. Can't even turn off mipad as holding power button shuts the device for a second and instantly mi logo comes up and stays like that forever.
Help!
Perhaps your boot goes to system2 but twrp has installed the rom in system1 (or merged system) ?
You can flash CWM recovery, change active system to 1 (in 'advanced'), and then flash back twrp .
Thanks
NAVrasZ said:
Perhaps your boot goes to system2 but twrp has installed the rom in system1 (or merged system) ?
You can flash CWM recovery, change active system to 1 (in 'advanced'), and then flash back twrp .
Click to expand...
Click to collapse
Your suggestion worked. I installed CWM, system2 was active. Changed it to system1 and was able to install Lineage OS 15.1. Thanks a ton.
chaitanya.v said:
Hi all
I was trying to install lineage os 13 on mipad but unable to do so. So i wiped everything except internal, sd and otg and then restored a backup i created earlier from twrp. When i did reboot to system mipad got stuck at logo. I am a newbie. Please help. Can't even turn off mipad as holding power button shuts the device for a second and instantly mi logo comes up and stays like that forever.
Help!
Click to expand...
Click to collapse
I am facing same problem also miflash success but same problem and twrp mode also stack.
Hello guys,
my phone ( Xiaomi Redmi note 3 Pro ) is bootlooping after flashing SuperSU.
I am using Nitrogen OS 7.1 and stuck in the logo.
I readed about booting the phone into recovery by pressing Volume +/- with power button.
But my phone did not respond to them even after pressing for a long time.
I hope you guys can help me
EDIT : I can enter to TWRP now but can I just use UnSU script to remove the flashed SuperSU that made my phone bootloop to fix the problem or do I need to factory reset it?
A Q R I N said:
Hello guys,
my phone ( Xiaomi Redmi note 3 Pro ) is bootlooping after flashing SuperSU.
I am using Nitrogen OS 7.1 and stuck in the logo.
I readed about booting the phone into recovery by pressing Volume +/- with power button.
But my phone did not respond to them even after pressing for a long time.
I hope you guys can help me
EDIT : I can enter to TWRP now but can I just use UnSU script to remove the flashed SuperSU that made my phone bootloop to fix the problem or do I need to factory reset it?
Click to expand...
Click to collapse
wipe everything and flash rom again.
A Q R I N said:
Hello guys,
my phone ( Xiaomi Redmi note 3 Pro ) is bootlooping after flashing SuperSU.
I am using Nitrogen OS 7.1 and stuck in the logo.
I readed about booting the phone into recovery by pressing Volume +/- with power button.
But my phone did not respond to them even after pressing for a long time.
I hope you guys can help me
EDIT : I can enter to TWRP now but can I just use UnSU script to remove the flashed SuperSU that made my phone bootloop to fix the problem or do I need to factory reset it?
Click to expand...
Click to collapse
Why still using SU?, use Magisk.
pritamdutt said:
wipe everything and flash rom again.
Click to expand...
Click to collapse
Are there another ways without flashing everything from the start?
When I Rooted My Device And Flashed TWRP I tried rebooting into the Recovery and It Hangs on the Kindle Fire Logo and does not boot into TWRP so i Rebooted back into The OS and Tried another File But same thing happened Please Can someone help
EdwardTCM said:
When I Rooted My Device And Flashed TWRP I tried rebooting into the Recovery and It Hangs on the Kindle Fire Logo and does not boot into TWRP so i Rebooted back into The OS and Tried another File But same thing happened Please Can someone help
Click to expand...
Click to collapse
how are you trying to get into the recovery?. not sure if you know but if you hold power and volume down button together if will force device to reboot, quickly hold down power button and volume up this should get you into twrp recovery.
Hello everyone,
I just flashed LineageOS on my pocophone f1 (clean install), pressed the reboot system button at the end of the install and it rebooted to TWRP. Same when I force reboot (press power button for 10s). And now it's stuck on the TWRP boot screen, I don't have access to the TWRP menu and options.
Also, I can reboot to fastboot but when I plug the phone in to the computer, it isn't detected by adb.
I flashed roms many times, I don't know what could have went wrong...
Any idea ?
(btw I didn't flash any gapps or magisk)