I am using usb cable to connect my phone to laptop but the phone doesn't show any transfer notifications. My device only charges.
I tried uninstalling usb drivers and reinstalling them on laptop which didn't work.
I used the same cable on other laptop and it worked fine.
Is this the fault of my laptop or my device? Can someone provide solution to it?
If it works on a different laptop it sounds like your laptop is the issue. What make and model is it, and running what OS?
Related
i am really tired from a problem with my hd2 i can‘t connect my hd2 with pc (( usb cable )) i did every thing and i couldnt recognize it i am really desperate can anybody help ?
Might
help if you mention what Windows/system you are running on your pc
the operation system is windows 7
Do
you have the Windows Mobile Device Center installed?
Have you tried a Disk Drive connection, under connections USB to PC?
I do know for a fact some people simply solved the problem just by using another USB port...
Might be worthwhile checking your firewall too, I believe some can block the active sync connection
registeredxdadevi said:
you have the Windows Mobile Device Center installed?
Have you tried a Disk Drive connection, under connections USB to PC?
I do know for a fact some people simply solved the problem just by using another USB port...
Might be worthwhile checking your firewall too, I believe some can block the active sync connection
Click to expand...
Click to collapse
thank you for your post i did everything you wrote the problem still my hd2 doesnt recognize to my pc i am planning to sell my phone because og this
Havent used WP7 yet, but in WM6.x there is something in Settings for USB connection - this gives you the ability to check a box that says (something like) Fast Outlook connection. If you uncheck this you will probably find that your HTC connects beautifully. So, again, trawl through your setup/settings and look for something that talks to USB connection, or PC Synch.
Hope this helps.
Uninstall all versions of Windows Mobile Device Centre then reboot, just install the latest update from of WMDC from Microsoft and plug your HD2 in.
It worked for me and I'd tried everything else.
G
I'm having the same problem also, but I am using Windows Vista. I tried just about everything the forum mentions its pretty frustrating. I've tried uninstalling and installing WMDC and tried different USB ports, also tried selecting a few of the different settings on the phone in the USB to PC. Does anyone know what possibly I am missing or not doing correctly?
evilged said:
Uninstall all versions of Windows Mobile Device Centre then reboot, just install the latest update from of WMDC from Microsoft and plug your HD2 in.
It worked for me and I'd tried everything else.
G
Click to expand...
Click to collapse
I number of my friends had the same problem concerning the connection and when they did the above it fixed the problem. I suggest everyone give it a go.
Still having problems with this... I've uninstalled rebooted and installed and reboot WMDC and also messed with all the settings on USB to PC and tried every single USB port on my computer. I am running Windows Vista 64 bit version and still not having any luck getting this phone to connect via USB. Anyone have any ideas?
My Galaxy S3 doesn't connect any longer to my PC using a USB cable.
Better said, when I connect it, it makes a sound but nothing else happens, no change in the notification panel, and under settings USB tethering is unselected. Needless to say, my PC does not see the device.
I exclude a cable problem as I have two cables (one original) that were both working. I also exclude a PC problem as the situation replicates on both desktop (Win 7 x64) and notebook (Win 7 32-bit),and the latter has not been updated or had new software installed.
What I attempted:
un/select USB debug mode
un/install Kies
un/install Samsung USB drivers
wipe cache/dalvik/data reset+ format system + restore old backup from CWM
Does anybody have a suggestions on how to proceed? Thanks for your help!
Just on top on my head-do you maybe connect it to or thorugh a usb hub to a pc.
If so try directly into a usb on the pc.
Sent from my GT-I9300 using Tapatalk 2
asukaj said:
Just on top on my head-do you maybe connect it to or thorugh a usb hub to a pc.
If so try directly into a usb on the pc.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Before I had been using with success a USB hub (only the desktop only, not the notebook), since I have been experiencing the problem I have also tried a USB port to no avail.
As I stated, I am pretty sure the problem lies with the phone, in fact since my original post I have seen a similar thread at here at xda
I tried everything and at the end brought the phone in for assistance.
Turns out the problem is hardware-related, on connector pin was burned. The connector has 4 pins out of which two are sufficient for charging (which is why it was being charged by the pc) but all 4 of them are necessary for the phone to be recognized as usb device.
According to the technician to whom I spoke, it happens occasionally but is not a systemic problem.
Hi
In the past week or so my HP TouchPad running CM9 has suddenly stopped being browsable in Windows Explorer. The cm_tenderloin device appears in the list of drives, but clicking reveals a white screen. MTP is selected on the Storage > USB computer connection screen.
Curiously, in the same time, my HTC HD7 has stopped syncing with Zune, so I suspect this is a USB related issue - can anyone point me in the right direction?
Try connecting while in webos with your USB if that doesn't work it would sound like there is a problem with the USB socket on your PC have you tried another socket on your PC or a different PC sometimes my laptop has a hissy fit and I have to use a different socket with hard drives etc . I would suggest doing that before worrying that your tablet has faulty socket.
sstar said:
Try connecting while in webos with your USB if that doesn't work it would sound like there is a problem with the USB socket on your PC have you tried another socket on your PC or a different PC sometimes my laptop has a hissy fit and I have to use a different socket with hard drives etc . I would suggest doing that before worrying that your tablet has faulty socket.
Click to expand...
Click to collapse
I'm beginning to think that the issue is with Windows 7, tbh. Multiple cables and different ports have been tried, all to no avail. Something has corrupted the OS, I think. No viruses or malware are being detected, so I'm going to fall back on a reinstall (I keep my data off the system drive, so no biggy)
you can always connect over the network and browse everything on your device that way. i like es file explorer. just put the thouchpad in ftp mode then connect to it from the computer. also if you know how to use ./adb connections you can move files to and from the touchpad and browse the entire device that way.
Hey guys. I'm sorry if this has already been posted, but I've searched everywhere on the internet and could not find this same problem. No troubleshooting tips helped either.
I own a Lenovo P2 and until recently I could connect to the PC via USB without any problems. Now, my PC doesn't recognize the phone at all. I mean that it doesn't even show up as faulty device or searching for drivers.
With no computer does my phone connect anymore.
The USB cable is not faulty either, nor the PC USB ports and the phone's jack, and the option for MTP is selected. Despite all this it only charges.
Here is the catchy part as the USB configuration setting seems bugged out for me. No matter which option I choose, MTP will show up as selected, yet the phone will only charge.
Hi, when I connect my Poco with USB cable to my computer the installation of the drivers are ok, windows found the device.
But when i open it the Poco's window is completely white and empty: no files, no folders...there is not the SD card...
I would like to transfer flies from pc to phone by USB connection but it seems impossibile!!
The error message is: "the device has stopped responding or has been disconnected"
P.S.
Debus USB activate, windows 7
Did you change USB connection mode from charging to transfer files? You know, after tapping on notification appearing after USB connection?
Another issue (encountered by me), even with correct connection mode, Pocophone device in Windows 10 (maybe in Windows 7 is the same) remains empty if connected thru an additional USB3 hub. Direct connection to one of USB ports in PC case works flawlessly.
katoda_ltd said:
Did you change USB connection mode from charging to transfer files? You know, after tapping on notification appearing after USB connection?
Another issue (encountered by me), even with correct connection mode, Pocophone device in Windows 10 (maybe in Windows 7 is the same) remains empty if connected thru an additional USB3 hub. Direct connection to one of USB ports in PC case works flawlessly.
Click to expand...
Click to collapse
Oh kat, I've got it!! :good:
The different thing I have done from this morning is to disable and after enable developer option...now I can see the 2 folders on the PC in the Poco window: SD memory and internal memory!!
Don't know why...but works!!
Thank You so much!! :good: