Last week I retire the development of our KTV system software on Amlogic S812 and move forward to Allwinner H6 but now encountering an issue that Netflix doesn't play video on the second screen connected to the HDMI port. Tried to hack the build.prop but no luck.
I'm able to install Netflix-4.16.4_build_15215.apk or even com.netflix.mediaclient_8.28.0_build_4_40234-40234_minAPI24(arm64-v8a,armeabi-v7a,x86,x86_64)(nodpi)_apkmirror.com.apk on H6 but can only see video on the on-board LDVS interface, HDMI interface just outputs texts, no video.
Any clues?
Thanks in advance,
Nuno
Nuno_Duque said:
Last week I retire the development of our KTV system software on Amlogic S812 and move forward to Allwinner H6 but now encountering an issue that Netflix doesn't play video on the second screen connected to the HDMI port. Tried to hack the build.prop but no luck.
I'm able to install Netflix-4.16.4_build_15215.apk or even com.netflix.mediaclient_8.28.0_build_4_40234-40234_minAPI24(arm64-v8a,armeabi-v7a,x86,x86_64)(nodpi)_apkmirror.com.apk on H6 but can only see video on the on-board LDVS interface, HDMI interface just outputs texts, no video.
Any clues?
Thanks in advance,
Nuno
Click to expand...
Click to collapse
@Nuno_Duque
Welcome to XDA. I hope you'll always find and get the support you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved the thread to Android Q&A.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
Noted with thanks
Related
Dear all,
I have a trouble with Android Projector. When i mod to ATV launcher, it can not display HDMI signal because ATV launcher overlap everything. Therefore HMDI signal can not be displayed. Everyone can help me to solve.
Thanks all so much!
TitanTVT said:
Dear all,
I have a trouble with Android Projector. When i mod to ATV launcher, it can not display HDMI signal because ATV launcher overlap everything. Therefore HMDI signal can not be displayed. Everyone can help me to solve.
Thanks all so much!
Click to expand...
Click to collapse
Hello and good morning, @TitanTVT
Welcome to XDA. I hope you'll always find and get the support you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved the thread to Android Q&A.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
I am new to the realm of Android and especially embedded style devices. I have not disassembled the device yet but I do have photos of the internals with high def photos of only a few devices. The platform is based on a Qualcomm WTR4095 (Transceiver), Qualcomm QFE4320(??), Qualcomm MSM8909 (Snapdragon 210), WCN3610(WiFi, Bluetooth, FM?). It seems similar to structure of the Samsung Galaxy S7 Edge from some light googling.
My problem is that the cellular service for this device is no longer supported. My question is, is the SIM data embedded in one of these chips? If it is, how would it be possible (if at all) to get this device working with a new cellular network plan. If the SIM data is not embedded what sort of device on the circuit should I look for and how would I rig in a new SIM?
Let me know if I need to fill in more information but this seemed to be the best place for me to start asking for some guidance on the road ahead!
cernunn0 said:
I am new to the realm of Android and especially embedded style devices. I have not disassembled the device yet but I do have photos of the internals with high def photos of only a few devices. The platform is based on a Qualcomm WTR4095 (Transceiver), Qualcomm QFE4320(??), Qualcomm MSM8909 (Snapdragon 210), WCN3610(WiFi, Bluetooth, FM?). It seems similar to structure of the Samsung Galaxy S7 Edge from some light googling.
My problem is that the cellular service for this device is no longer supported. My question is, is the SIM data embedded in one of these chips? If it is, how would it be possible (if at all) to get this device working with a new cellular network plan. If the SIM data is not embedded what sort of device on the circuit should I look for and how would I rig in a new SIM?
Let me know if I need to fill in more information but this seemed to be the best place for me to start asking for some guidance on the road ahead!
Click to expand...
Click to collapse
Hello and good afternoon, @cernunn0
Welcome to XDA. I hope you'll always get the support you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved your thread to Android Q&A.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
Oswald Boelcke said:
Hello and good afternoon, @cernunn0
Welcome to XDA. I hope you'll always get the support you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved your thread to Android Q&A.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
Click to expand...
Click to collapse
No worries, thank you for moving it to the correct forum. I will review the guidances for future reference.
I wonder whether that could we receive satellite tv channels (c-band and so on) without any extra antenna and without internet only by 5G chipset reverse engineering ? If yes, As I am not programmer, would you please let me know how it would be possible to write and make driver and software for watching satellite tv on any Samsung android smartphone that you have it ?
Thank you very much.
brayan861 said:
I wonder whether that could we receive satellite tv channels (c-band and so on) without any extra antenna and without internet only by 5G chipset reverse engineering ? If yes, As I am not programmer, would you please let me know how it would be possible to write and make driver and software for watching satellite tv on any Samsung android smartphone that you have it ?
Thank you very much.
Click to expand...
Click to collapse
Hello and good afternoon, @brayan861
Welcome to XDA. I hope you'll always get the support you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved your thread to Android Q&A.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
I'm not sure if this is the right topic for it.
But I was wondering if I could change the firmware on a cheap (YC-83p) tab.
Got it as a welcome gift from a course I got started. So don't have anny reasons to compain at all.
It doesn't has the greatest specs but it handles some basic stuff pretty well. So it's actually decent for bringing along on vacation or use it as a Home Assisstant controll tab.
It's actually this tab with slightly improved specs. (2GB of RAM instead of 1GB etc.):
Portable 8 inch Android 10 WiFi Tablet - YC-83T | Portworld Manufacturer
2021 New Arrival Portable 8 inch Quad-Core Processor Vertical Display 800*1280 IPS Screen Gms Android 10 1G+16G Android WiFi Tablet
portworld-solu.com
It's actually just fine as it is. But it seems it has some custom firmware onit, at least showing a custom bootscreen of the instution of the course. And I would like to change it if possible.
I searched the internet, but there's actually not much to be found.
So my question is if someone knows how to reflash this kind of devices, or at least change the bootscreen? I would prefer the first option if possible.
Thanks in advance!
edit:
It's running Android (Go edition) 11 btw.
Rockel said:
So my question is if someone knows how to reflash this kind of devices, or at least change the bootscreen? I would prefer the first option if possible.
Click to expand...
Click to collapse
Hello and good afternoon, @Rockel
Welcome to XDA. I hope you'll always get the support you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved your thread to Android Q&A.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
Oswald Boelcke said:
Hello and good afternoon, @Rockel
Welcome to XDA. I hope you'll always get the support you require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved your thread to Android Q&A.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
Click to expand...
Click to collapse
Oh thanks! I already thought it was the incorrect toppic. But it was the best option I could find at the moment.
Totally missed this Android Q&A somehow
Rockel said:
I'm not sure if this is the right topic for it.
But I was wondering if I could change the firmware on a cheap (YC-83p) tab.
Got it as a welcome gift from a course I got started. So don't have anny reasons to compain at all.
It doesn't has the greatest specs but it handles some basic stuff pretty well. So it's actually decent for bringing along on vacation or use it as a Home Assisstant controll tab.
It's actually this tab with slightly improved specs. (2GB of RAM instead of 1GB etc.):
Portable 8 inch Android 10 WiFi Tablet - YC-83T | Portworld Manufacturer
2021 New Arrival Portable 8 inch Quad-Core Processor Vertical Display 800*1280 IPS Screen Gms Android 10 1G+16G Android WiFi Tablet
portworld-solu.com
It's actually just fine as it is. But it seems it has some custom firmware onit, at least showing a custom bootscreen of the instution of the course. And I would like to change it if possible.
I searched the internet, but there's actually not much to be found.
So my question is if someone knows how to reflash this kind of devices, or at least change the bootscreen? I would prefer the first option if possible.
Thanks in advance!
edit:
It's running Android (Go edition) 11 btw.
Click to expand...
Click to collapse
if you are on a rooted device, try this: https://play.google.com/store/apps/details?id=com.jrummy.apps.boot.animations&hl=en_US&gl=US
$cronos_ said:
if you are on a rooted device, try this: https://play.google.com/store/apps/details?id=com.jrummy.apps.boot.animations&hl=en_US&gl=US
Click to expand...
Click to collapse
Thanks, but I actually don't think it's rooted. Didn't cheked it yet though.
Actually looked for a way to root it, then it would be easier to put custom firmware on it I guess. But there's just verry little to completely nothing to be found of this tablet.
But I asume there must be a way sinse this institution was also able to customize some things.
Some questions:
How locked down is the tablet? Can you access gms services? Can you freely install apks? Are there developer options in settings and does it have the OEM unlock toggle?
Try to install adia64 and 7-zip. What is the processor? If it is mtk, you might be able to temp root your device.
Reviving this as I got this tablet as well and looking for possibilities.
I have posted here about my progress https://forum.xda-developers.com/t/can-we-root-this-tablet.4560407/page-2#post-88355463
Tablet is pretty generic but I don't seem to find any resource about it. Any ideas?
Hi folks. Just fitted a Eiky T900 unit, quite impressive for the price but struggling to set up/connect the android auto. I'm pretty sure it's compatible, tried connecting the the USB but these just want to charge the phone. Any help much appreciated
Cmarshy201 said:
Hi folks. Just fitted a Eiky T900 unit, quite impressive for the price but struggling to set up/connect the android auto. I'm pretty sure it's compatible, tried connecting the the USB but these just want to charge the phone. Any help much appreciated
Click to expand...
Click to collapse
Hello and good evening,@Cmarshy201
Welcome to XDA! I hope you'll alawys get the support your require.
However, prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved your thread to Android Q&A.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator