Its taken me a while to figure out a way to bypass the FRP (Factory Reset Protection) Lock on my Huawei EVA-L09 and do so while not bricking my device or installing shady software/roms so if this helps I hope you leave me a like and comment how long its taken you before you found this guide.
Its completely free as I refuse to pay money which I hope you appreciate as every other guide wants you to pay to unlock a device so no matter what level of skills you are this should help you to gain access to you're Huawei EVA-L09 and other models (I've also used this method on a Huawei P Smart (FIG) but this should also work on all the devices listed in the table below)
DeviceModelBootloaderHuawei P8 Lite (2015)ALEKirin 620Huawei Y6IICAMKirin 620Honor 5C / 7 LiteNEMKirin 65x (A)Honor 7XBNDKirin 65x (A)Honor 9 LiteLLDKirin 65x (A)Huawei MediaPad T5AGS2Kirin 65x (A)Huawei Nova 2PICKirin 65x (A)Huawei P10 LiteWASKirin 65x (A)Huawei P20 Lite / Nova 3eANEKirin 65x (A)Huawei P8 Lite (2017)PRAKirin 65x (A)Huawei P9 LiteVNSKirin 65x (A)Huawei Y9 (2018)FLAKirin 65x (A)Huawei MediaPad M5 LiteBAH2Kirin 65x (B)Huawei Nova 2i / Mate 10 LiteRNEKirin 65x (B)Huawei P Smart 2018FIGKirin 65x (B)Honor 6 PlusPEKirin 925Huawei P8GRAKirin 935Honor 8 Pro / V9DUKKirin 950Honor 8FRDKirin 950Huawei P9 StandartEVAKirin 950Honor 9STFKirin 960Huawei Mate 9 ProLONKirin 960Huawei Mate 9MHAKirin 960Huawei MediaPad M5CMRKirin 960Huawei Nova 2sHWIKirin 960Huawei P10VTRKirin 960
First download and extract the Android SDK Platform-Tools package for windows from -> https://developer.android.com/studio/command-line/adb
Next download drivers from -> https://adb.clockworkmod.com/ and run .exe file
Next go to -> https://github.com/mashed-potatoes/PotatoNV and read through the entire page and follow the steps to install HiSuite, test point drivers and latest version of PotatoNV and find out where you're test point are on you're device and learn how to use the tool
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Open PotatoNV and click disable FBlock and choose you're bootloader (refer to list on GitHub Repo) in my case for the Huawei EVA-L09 it was the Kirin 950 and follow the repo instructions to ground you're test point while inserting you're USB, now the target device field should show you're device then click start! and If you've followed the steps correctly then congrats you've generated a new bootloader code and got the following display.
Click to expand...
Click to collapse
From the display write down the "New Unlock Code" + "Build number" for later
Click to expand...
Click to collapse
Now we need the firmware to flash
Go to -> http://huawei-firmware.com/phone-list/ to find you're compatible firmware
Click to expand...
Click to collapse
My build number was "EVA-L09C02B363" so on the site I searched for that build number but found nothing so I removed 1 character from the end "EVA-L09C02B36" and found 2 results for "Huawei P9 EVA-L09C02B361 Firmware"
If you cant find a result keep removing 1 character from the end of you're build number until you can find the closet build to yours and Download it
Boot phone into fastboot mode
In the Android SDK Platform-Tools package folder hold In "CTRL + Shift" and Right click in the folder and click the option "open PowerShell window here"
In PowerShell type the following command "./fastboot oem unlock YOUR_CODE_HERE"
Press the volume key to select unlock bootloader on you're phone and press the power button (Now you've unlocked you're bootloader)
Download the firmware and extract the files and move the entire Dload folder to an SDcard (rename the SDcard SDcard) and insert it into you're device
Now boot the phone with both volume buttons pressed down and power button and let it install the new firmware
Click to expand...
Click to collapse
I personally had an error at 99% of install doing it this way so I had to manually flash each partition if you have the same issue then follow the steps
Download the tool Huaweiupdateextract tool -> https://www.leakite.com/flash-huawei-ota-update-without-sdcard/
Click to expand...
Click to collapse
And click "click", now browse for the update.app file inside the Dload folder and right click on the files and click extract all and save them into the Android SDK Platform-Tools package folder you extracted earlier
Boot phone into fastboot mode
Click to expand...
Click to collapse
Now you need to manually flash every .img file you extracted to the corresponding partition, all the .img files are saved in CAPSLOCK and the corresponding partition you need to flash to is the file name in all lowercase minus the .img part so for example the file RECOVERY.img needs to be flashed to the recovery partition and USERDATA.img to userdata and so on
In the same Powershell Window from earlier type "./fastboot flash *partition" "PARTITION.img" and replace partition with every img you extracted, example for USERDATA.img: "./fastboot flash userdata USERDATA.img"
Some flash's may fail, just move on to the next
Then type "./fastboot reboot"
Click to expand...
Click to collapse
And now skip through everything and access you're phone, I then personally booted my phone into Erecovery and clicked Install firmware and recovery and signed into my wifi after downloading I opened my phone and inserted my sim card (in my case it was lyca mobile and after the phone accepts the sim you will be prompted to take the system update, I flashed build EVA-L09C02B361 to my device but now I can update to my original build number EVA-L09C02B363.
Hopefully if you followed everything correctly you've just bypassed FRP.
You're welcome as someone who dosent have a lot to spend on tech I really value this sort of information and hopefully this full guide can help even a beginner gain access to there bricked phone.
Let me know if this helps!
doesn't work on Huawei Y6II CAM-L21 ..
kalinx said:
doesn't work on Huawei Y6II CAM-L21 ..
Click to expand...
Click to collapse
Did you ground the test point while clicking start?
brokeboy said:
Did you ground the test point while clicking start?
Click to expand...
Click to collapse
yes, in many ways i try it but this doesn't work too
kalinx said:
yes, in many ways i try it but this doesn't work too
Click to expand...
Click to collapse
Can you run it without Fblock and then run again with it ticked?
Yes I was struggling with it yesterday all day, in many ways. Now I get off. I will buy Sony Xperia M4 aqua with very easy root, I get unlock code from Sony website. Damn you HUAWEI! :/
kalinx said:
Yes I was struggling with it yesterday all day, in many ways. Now I get off. I will buy Sony Xperia M4 aqua with very easy root, I get unlock code from Sony website. Damn you HUAWEI! :/
Click to expand...
Click to collapse
Can you explain every step you did before to get to that point, also what's wrong with you're device?
Can this process work on Honor 10 col l29? He has kirin 970. Thank you.
levis36 said:
Can this process work on Honor 10 col l29? He has kirin 970. Thank you.
Click to expand...
Click to collapse
If its not on the list then it isn't supported but I believe if you look through the repo maybe someone forked it or there might be an alternative... I typed in honor in the questions and found this but there could be more
I solved it by changing the motherboard. I bought a phone with a broken display, 4 €, I changed the card and it did not have a lock on the screen and I entered the settings, return to the factory settings and everything goes ok. The new motherboard has emui 10.0.0 4 / 64gb and the old one was emui 8.1 which I failed to unlock I don't know the specifications it had. I would have liked to unlock the other one can have 6 / 128g.
levis36 said:
I solved it by changing the motherboard. I bought a phone with a broken display, 4 €, I changed the card and it did not have a lock on the screen and I entered the settings, return to the factory settings and everything goes ok. The new motherboard has emui 10.0.0 4 / 64gb and the old one was emui 8.1 which I failed to unlock I don't know the specifications it had. I would have liked to unlock the other one can have 6 / 128g.
Click to expand...
Click to collapse
Well done, that's good way to get past it... What phone did you take the motherboard from? Did you not find any info on how to use the bootloader unlocker with you're Honor 10 COL-L29 (Kirin 970)?
I tried 3 methods and none of them worked, they were all restricted, I got to a point and I couldn't move on.
Hi, I have a mate 9 with FRP and Bootloader locked, and when I try to unlock bootloader via fastboot, I have a warning telling that FRP needs to be unlocked first. Do you have any suggestiong?
Well, I did it at last After I have done this here and got no FRP bypass, I continued to google because this is weird, being able to run ADB/Fastboot commands, but unable to remove damn FRP. I have found this tool and it worked:
Download Huawei FRP and ID remove Tool For PC
Download Huawei FRP and ID remove Tool For PC if you want to bypass FRP lock google account from Huawei/Honor mobile
huaweiflash.com
So I can now thank the author for this guide, although unclear in some parts, then it has led finally to success. I have spent a couple of hours yesterday trying that bypass from the device (each and every method to start Youtube/Chrome/Maps/Google vie Talkback is already blocked as of now). Then a couple of hours for this guide. I could have purchased me an open phone instead of cracking this one but I wanted to play with some Huawei without having to pay anything.
There were unclear point in the guide, I elaborate
- to start fastboot mode: keep Volume down pressed and connect USB cable.
- you don't need specifically powershell, command line works as well
- the reflash is done from 32GB FAT32 formatted card named SDCARD which contained the unpacked folder dload with firmware files (SDCARD:/dload/<files>)
---initial comment---
EVA-L09 here.
Well, the procedure as described does not remove FRP lock.
PotatoNV worked, oem unlock command went through as well, but... Fastboot screen shows "FRP Lock" in green before the "oem unlock" command run; after the command and subsequent lowlevel reset; and after reflash.
The device asks the Google account after boot the same way as before the unlock/reflash.
Maybe the cumbersome way how you reflashed the phone is instrumental to enable FRP bypass (I have found exactly the same software build and my phone updated normally to 100% from SD card).
I have a P9 EVA-L09 device that has FRP locked. i try this method without PC and its work for me
Related
MODERATOR NOTICE: LINKS REMOVED
Per the forum rules, using XDA to promote your own blog is not allowed:
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
Click to expand...
Click to collapse
Encouraging members to participate in forum activities on other phone related sites is prohibited.
Click to expand...
Click to collapse
_________
Remember: This method will work with only G-955F-G950FXXU1AQDA
Download Below Software and files in your Computer Desktop/Laptop.
1/ Odin V3.12.3
2/ FRP Remove ADB File*
3/ ADB ENABLED
Drag all software on your PC Desktop.
Enter in DOWNLOAD MODE:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
there you will have message of "WARNING", so press "Volume UP" key from there to go into Downloading Mode of your galaxy S8 plus and S8 edge.
Connect Your Device with Computer / Laptop:
Extract, install and open "Odin software" to bypass FRP Protection, and after connect your S8 Plus and S8 Edge android device with your PC or Laptop, to make sure its connection is ok, just see inside "ODIN Software", there will be one "O:[COM6]" on the left top side of Odin, same as in below image:
Now inside "ODIN Software", click on "AP" button, and then give the file location of* "ADB ENABLED.tar"
then click "START" button from odin, and wait till this process finish, on finishing this process, you will have "PASS" green color message on your ODIN top left BOX.
Let your Device Turn on Properly
Once your device turned on properly, now go back to your pc, and right click and extract "FRP Remove ADB File" software on your desktop, remember this software we have downloaded before from top of this post. once extraction finish, go inside extracted folder, and from there
While pressing "Shift key" press "Right Mouse Button" together.
and then you will have right click menu on your computer screen as shown in below image.
After that, from right click menu, you have click on "Open command window here", so you will have a cmd window on your computer screen, now make sure, your mobile is connected to fastboot, for that we have to type in cmd window this below code.
adb devices
after pasting above adb devices code in cmd, you must get your android device detail there, which will make sure that your device is connected to fastboot.
Copy below code one by one, and past into your command prompt cmd:
CODE 1:
adb shell content insert –uri content://settings/secure –bind name:s:user_setup_complete –bind value:s:1
CODE 2:
adb shell am start -n com.google.android.gsf.login/
CODE 3:
adb shell am start -n com.google.android.gsf.login.LoginActivity
Final Step: Restart your device, after completing above 3 code process, and then you will have initial setup on your S8 Plus and S8 Edge android device, just complete that initial setup, and you are done to bypass FRP Protection from your Galaxy S8 PLUS, Galaxy S8 Edge.
For further: ******
Odin just crashes for me.
Does this method works on Oreo?
mrjoy said:
Does this method works on Oreo?
Click to expand...
Click to collapse
How did you miss the big red letters? This method will work with only G-955F-G950FXXU1AQDA
Or just flash a combination ROM, then flash stock. That's what I do when I've locked myself out my phone
Sent from my Pixel 2 XL using Tapatalk
Sorry
kekistaneerefugee said:
How did you miss the big red letters? This method will work with only G-955F-G950FXXU1AQDA
Click to expand...
Click to collapse
Sorry, i did not get you
help, my s8 + does not let me install twrp, says error recovery frp lock, and when the flash stock firmware says encryption error, should I flash before G955FXXU1AQDA? I can not find that firmware !! HELP
Please let me guide for G950U
i have SM G950U i want to bypass a google account i downloaded the Odin and Combination files and when i used to connect my device it detected but while flashing its just get failed after ''Setup Conection"..
please give me proper link and please guid me.. Thanx me advance.
I have Oreo (Renovate) but with BL AQL5
I can't fully upgrade firmware to CRC7 because FRP Protection
But I can't also downgrade rom to AQL5 (NOUGAT)
Odin get error when I try flash AQL5 AP and CSC
Have you got any solution for full downgrade to NOUGAT and make BYPASS ?
deba/genesis team dev said:
Bypass Samsung S8 Latest Security Patch -https://www.gadgetsdr.com/2018/06/bypass-frp-samsung-s8/
Click to expand...
Click to collapse
is it necessary to downgrade from 8 to 7 ?
tomaasz said:
I have Oreo (Renovate) but with BL AQL5
I can't fully upgrade firmware to CRC7 because FRP Protection
But I can't also downgrade rom to AQL5 (NOUGAT)
Odin get error when I try flash AQL5 AP and CSC
Have you got any solution for full downgrade to NOUGAT and make BYPASS ?
Click to expand...
Click to collapse
Here is combination file for bootloader version 3 ( Oreo ) . You either on 3 or 4.
https://tx5.androidfilehost.com/dl/...3836283760/COMBINATION_FA70_G955USQU3ARD1.zip
I flashed combination file, ADB commands. then factory firmware . No luck. FRP still on.
My SM-G955U does not have "OEM Unlock " Option.
EDIT:
Works . every time I enabled oem mode slider with slider to the enable position but would revert back to disabled. I had to hold down the button for 3 seconds then a smallmenu that displayed radio buttons .
Never ran into this with any other handset.
mrjoy said:
Does this method works on Oreo?
Click to expand...
Click to collapse
yeah this would work, but for that you will need flasher file, you can check your device firmware code by going into recovery mode
ah that's very bad? are you still facing frp lock issue?
Bypass Google Account with other launcher
Hy their, my g950F is on Android 7 with Security Patch Level U1 (1) Oktober 2017Patch, and I could bypass old Google Account lock by install 91Launcher and start with other Google Account. But how could I deinstall now the old Account?
And I can't open Developer Options to OEM unlock or see In Security the Old Samsung Account!
Someone has an idea, I wanted to Try Combination Files. But while the other Launcher is working fine its okay.
But I Want to Root and install TWRP on the Phone.
So I want to complete Erase the Old Samsung Account. If I go to Savings & Recovery Options, for Hard Reset aso. I first have to log in again in the old Samsung Account Before I could do anything to erase and Use Normal Google Launcher?
Thanks for all the help
any method for android 9
in recovery this appear /PPR1.180610.011/G955FXXU4DSBF
So is a way to remove FRP on samsung s8+ with pie?
I cant find anywhere the Combination file firmware for SM-G955F (S8 plus) for Android 9.0 Pie, only FA70. Is there a way to make it ?
This is the stock Rom of N & M for Yoga Book LTE & WIFI for the needers
if any dev want to help me developing a dual boot for Yoga Book, just PM me or join Telegram Group for Yoga Book devs and users:
MOD EDIT: LINK REMOVED
Prees the Thanks button if that helps you
How to install it:
Be careful, these steps will erase all your data on tablet and will downgrade rom (stock marshmallow)
First of all: read and understand all of the instructions.
1. Download the stock ROM
https://cloud.kolyandex.su/index.php/s/4WDt6ghOzHAyP4s (Nougat WiFi version)
https://easy-firmware.com/home/browse/category/id/19521/ (Marshmallo LTE version)
https://androidfilehost.com/?fid=817550096634799507 (Marshmallo WiFi version)
2. Extract it to some folder
3. Download Intel Platform Tool Lite from here: https://01.org/android-ia/downloads/intel-platform-flash-tool-lite
4. Install Intel Platform Tool Lite
4. Boot into fastboot mode
5. Run Intel Platform Tool Lite
6. Make sure your tablet is recognized by the tool (otherwise you need to enable USB-debug in Developer settings)
7. Select "flash_update_from_eng.json" from folder in (2)
8. Push "start to flash"
9. Wait... (You should check tablet's screen in order to lock/unlock bootloader (it should be locked after flash in order to install OTA updates))
10. Reboot tablet
11. Your keyboard might not work: that is normal (just use on-screen keyboard for now)
12. After initial setup: open Contacts app, create new one (if there are no contacts yet), tap search and enter ####6020#
13. Choose your region
14. Reboot
15. Setup again (now halo should work)
16. Go into settings -> about -> updates and update till the last version (may take several hours)
17. Say thanks for alexjustes for his Amazing Steps
Thank you so much for posting this!
Have you tried flashing this through @danjac's TWRP build? I know trying to restore any nandroid backup made after the OTA upgrade to Nougat results in a boot loop.
beltani said:
Thank you so much for posting this!
Have you tried flashing this through @danjac's TWRP build? I know trying to restore any nandroid backup made after the OTA upgrade to Nougat results in a boot loop.
Click to expand...
Click to collapse
Unfort. no, because i dont have a YB Android Version, i have win ver.
THE MAXIMUM POWER said:
Unfort. no, because i dont have a YB Android Version, i have win ver.
Click to expand...
Click to collapse
I'm 99% sure this isn't flashable in custom recovery, at least without some modification and repackaging. It's a package designed for Intel Phone Flash Tools.
Still a huge asset, though, so thanks again!
beltani said:
I'm 99% sure this isn't flashable in custom recovery, at least without some modification and repackaging. It's a package designed for Intel Phone Flash Tools.
Still a huge asset, though, so thanks again!
Click to expand...
Click to collapse
Same, it can only flashed through fastboot mode
I got myself into quite the pickle today. I've been considering selling my Yogabook to switch to a Chromebook 2-in-1. I wanted to get the device back to as full vanilla as possible. I "thought" the first step was to lock the bootloader again and then do a full factory reset, apparently not... After booting back up from locking the bootloader I kept getting an Intel "bootloader error code 01" and Android would not start. It would take me to fastboot mode on it's own but I was unable to use the power button to make a selection and the device would just power off after 5 minutes. Thankfully from there or fore powering off I could hold Volume up on startup and get to fastboot manually or recovery. It being in a locked state now though I couldn't do much of anything else, no flashing anything other than loader, no format, no erase, and TWRP was not able to be booted.
Anyway I finally read a post about DNX mode and how to get to it, but nothing on how to really use it or any decent information imho. After finally finding some users on another part of the forum discussing a DNX flashing tool made for their devices HTC I went searching for a tool for the Lenovo. Lenovo has nothing for this (shame on you Lenovo!) but Intel does have it and it can be used with the recovery image posted above in this thread (and I assume all the others running around). And here is the URL for the tool
https://01.org/android-ia/downloads/intel-platform-flash-tool-lite
You just have to load a valid JSON file containing the proper config information for the ROM you are flashing iwithin the Intel tool. For this particular version of the ROM I did have to modify the "flash_recover_dnx.json" file to remove this section
Code:
{
"duration" : 5000,
"restrict" : null,
"tool" : "sleep"
},
Otherwise the flash tool would not load it due to the a bad tool from this JSON config named "tool". No other changes to the settings of the Intel flashing tool were needed.
Just click "Start to Flash" and once it was done all was well. Took a little over five minutes, it unlocked, flashed, and locked the device again itself.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No more Intel error stating the device isn't secure every reboot. I did lose all my data that was on it doing this but I wasn't worried about that going into it.
After initial setup in Android I did have to do the trick noted here to get the Halo keyboard working again which then required initial setup once more.
Hope this helps others.
@MarkAllen, thank you for your valuable information. This will help people unbrick their devices.
MarkAllen said:
I got myself into quite the pickle today. I've been considering selling my Yogabook to switch to a Chromebook 2-in-1. I wanted to get the device back to as full vanilla as possible. I "thought" the first step was to lock the bootloader again and then do a full factory reset, apparently not... After booting back up from locking the bootloader I kept getting an Intel "bootloader error code 01" and Android would not start. It would take me to fastboot mode on it's own but I was unable to use the power button to make a selection and the device would just power off after 5 minutes. Thankfully from there or fore powering off I could hold Volume up on startup and get to fastboot manually or recovery. It being in a locked state now though I couldn't do much of anything else, no flashing anything other than loader, no format, no erase, and TWRP was not able to be booted.
Anyway I finally read a post about DNX mode and how to get to it, but nothing on how to really use it or any decent information imho. After finally finding some users on another part of the forum discussing a DNX flashing tool made for their devices HTC I went searching for a tool for the Lenovo. Lenovo has nothing for this (shame on you Lenovo!) but Intel does have it and it can be used with the recovery image posted above in this thread (and I assume all the others running around). And here is the URL for the tool
https://01.org/android-ia/downloads/intel-platform-flash-tool-lite
You just have to load a valid JSON file containing the proper config information for the ROM you are flashing iwithin the Intel tool. For this particular version of the ROM I did have to modify the "flash_recover_dnx.json" file to remove this section
Code:
{
"duration" : 5000,
"restrict" : null,
"tool" : "sleep"
},
Otherwise the flash tool would not load it due to the a bad tool from this JSON config named "tool". No other changes to the settings of the Intel flashing tool were needed.
Just click "Start to Flash" and once it was done all was well. Took a little over five minutes, it unlocked, flashed, and locked the device again itself.
No more Intel error stating the device isn't secure every reboot. I did lose all my data that was on it doing this but I wasn't worried about that going into it.
After initial setup in Android I did have to do the trick noted here to get the Halo keyboard working again which then required initial setup once more.
Hope this helps others.
Click to expand...
Click to collapse
Thank You for the INFOS
The tool does not recognized my device
Please help to flash my yoga book.
Got these with the stock .json file as described above:
06/18/18 12:00:01.188 ERROR : No description value in command sleep
06/18/18 12:00:01.188 ERROR : Cannot create command with tool "sleep"
06/18/18 12:00:01.188 ERROR : Tool sleep not found or invalid tool configuration
Opened that file in notepad and deleted the sleep section - started flashing.
The usb drivers are definitely required, I lost the connection because they weren't loaded. I installed them and refreshed device manager and she started receiving the flash.
Used Win7 to flash also, the intel page says its not supported.
Flash success and locked bootloader after entering the country code - thanks very much all!
jeitana said:
Please help to flash my yoga book.
Click to expand...
Click to collapse
Try installing Android SDK drivers in you PC
Guys, if anyone faced a Probleme during his way to flash the ROM, PLZ tell me the problems with More Details
_Deeb0_ said:
Got these with the stock .json file as described above:
06/18/18 12:00:01.188 ERROR : No description value in command sleep
06/18/18 12:00:01.188 ERROR : Cannot create command with tool "sleep"
06/18/18 12:00:01.188 ERROR : Tool sleep not found or invalid tool configuration
Opened that file in notepad and deleted the sleep section - started flashing.
The usb drivers are definitely required, I lost the connection because they weren't loaded. I installed them and refreshed device manager and she started receiving the flash.
Used Win7 to flash also, the intel page says its not supported.
Flash success and locked bootloader after entering the country code - thanks very much all!
Click to expand...
Click to collapse
Is this compatible with the Yoga Book A12?
I have been away for a while. Why should I want to install this rom?
Ok I wanted to reset this tablet because the SystemUI ap was using %25 of the cpu constantly, I do not know when and hopw this piece of **** got to that level of crappy update, must be some google crap
- Can I unlock the OEM bootloader?
- Can I still use the twrp->Magisk method to root this?
thanks
Shawnki91 said:
Is this compatible with the Yoga Book A12?
Click to expand...
Click to collapse
Sorry but no
hajkan said:
I have been away for a while. Why should I want to install this rom?
Click to expand...
Click to collapse
No Need to reinstall this Rom if you have already your System, both are 100 % same
hajkan said:
Ok I wanted to reset this tablet because the SystemUI ap was using %25 of the cpu constantly, I do not know when and hopw this piece of **** got to that level of crappy update, must be some google crap
- Can I unlock the OEM bootloader?
- Can I still use the twrp->Magisk method to root this?
thanks
Click to expand...
Click to collapse
Reinstall the Rom will fix this, but doing factory reset will fix this too
In case anyone wants the wifi only M firmware here it is https://androidfilehost.com/?fid=817550096634799507
WARNING!
THIS GUIDE REQUIRES DISASSEMBLY, SO YOU WILL DEFINITELY LOSE THE WARRANTY!
DO IT AT YOUR OWN RISK!
If you want to repost this guide to other websites, please let me know before you repost.
For Chinese users: 中文版教程将会在dospy发布。
Click to expand...
Click to collapse
UPDATE: I've updated the new tool for unlocking the phone without understanding how to utilize such long commands.
You can watch the demonstration here: https://youtu.be/whrFsn8h7A4
Click to expand...
Click to collapse
So after I got a Nokia 4.2 prototype by opportunity, I just found the theory of bootloader unlocking.
Tricking development options for allowing "OEM unlocking" no longer works on latest security update.
What you need to have:
- a Nokia 4.2 unit that you finished back cover and upper plastic shell removal
- tweezers, and probably a standard philips screwdriver
- QPST (use at least 2.7.474) or any other app that could access the EDL, and Qualcomm USB port drivers are installed
- Latest Google Platform Tools
- Full backup of your userdata
Step 1: Trigger the phone to EDL mode, then change the driver to "Qualcomm HS-USB QDLoader 9008"
Please take a look at the attachment below, about the location you need to use tweezers.
For Windows users:
If the driver is already indicated as "Qualcomm HS-USB QDLoader 9008", get to Step 2.
If the driver is indicated as either "QHSUSB__BULK" (For users who have installed Windows Device Recovery Tool before) or "Qualcomm HS-USB Diagnostics 9008", you must change the driver to "Qualcomm HS-USB QDLoader 9008".
After driver changed, you need to disconnect the phone, disconnect and reconnect the battery ribbon cable, then trigger the phone to EDL again.
I assume the COM port number is 8 (COM8).
Click to expand...
Click to collapse
Step 2: Write config partition
As we already know, config partition is also the frp partition.
You need to create a config partition image that has "OEM Unlocking" function enabled, which need to alter the last byte, then change the overall checksum to make the config file valid.
For your convenience, I've created one.
Now download and extract the attachment below.
Use QFIL included in QPST to load the firehose file. Choose "Flat Build" and choose the "prog_emmc_firehose_8937_ddr.mbn" you extracted from the attachment.
Choose "Tools" - "Partition Manager", then wait for the partition list appear.
As "Load Image" seems not reliable, we have to use command to write it manually.
For 64-bit Windows users, the command is:
Code:
"C:\Program Files (x86)\Qualcomm\QPST\bin\fh_loader.exe" --port=\\.\COM8 --search_path=D:\path\to\where\you\extracted\N32_N42_unlock --sendimage=config.img --start_sector=16583680 --lun=0 --noprompt --showpercentagecomplete --zlpawarehost=1 --memoryname=emmc
If you use 32-bit Windows, you need to remove the " (x86)" (within space, without quotes) in the command above.
Step 3: Trigger the phone back to fastboot mode
Now hold the Volume down key, keep the phone connected, close the partition manager, then your phone will exit EDL mode and enter Fastboot mode directly.
Now check the unlock ability:
Code:
fastboot flashing get_unlock_ability
Expected output:
Code:
get_unlock_ability: 1
Step 4: Unlock the bootloader!
And you can unlock the bootloader with familiar commands.
Code:
fastboot flashing unlock_critical
Confirm unlock on the phone, then keep the volume down key pressed while the phone is erasing userdata.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Your phone will boot to fastboot mode again, and then:
Code:
fastboot flashing unlock
Confirm unlock on the phone again.
All done, that's how the bootloader is unlocked. You can reassemble the phone.
But strange enough, you can't see any unlock warning.
I will release boot image dumping guide and root guide very soon.
Special thanks:
Wingtech for leaking prototype units
why must Nokia insist on locking their devices down so hard ??
great discovery, will definitely be useful once TWRP is released. just curious, but SafetyNet is tripped with this, right?
Great!
Damn Nokia
I don't even own this phone but I kinda want to weigh in, are we seriously at this point? No honestly, Android as a whole was basically were dev focused iOS is locked down to hell and back here's freedom. Google has the Nexus line made for developers companies embraced it I remember there being multiple Google play editions of phones that ran stock Android. I'm happy we as a community can keep this alive but damn are companies trying to make it difficult to do something I want to do to a device I paid for and own. Samsung you can't root (save for sampwn and samfail) LG locked down bootloaders and gimped fastboot on some models (fastboot seriously?) Nokia now requiring you to take apart the freaking phone to achieve this, I'm half asleep and can't think of any other major brands at the moment. It's a joke. (Above root methods were mainly for US variants and TMobile variants of LG) something has to change I know it won't and I understand the reasoning behind it security and such but still. Sorry for the rant congrats OP on what you did I consider it magic but it's more you accomplished something I could only wish I could do.
Will it be possible to do without disassembly? Just in theory, not now
kir23rus said:
Will it be possible to do without disassembly? Just in theory, not now
Click to expand...
Click to collapse
Unwise to say no with absolute certainly, but doubtful
kir23rus said:
Will it be possible to do without disassembly? Just in theory, not now
Click to expand...
Click to collapse
I think it will be possible.
There's a hidden command in aboot "fastboot reboot-emergency" but unusable, unless some sort of authentication is done or bootloader unlocked.
I still don't know how the authentication is done yet, but it's definitely not something that average developers can access to.
That's why disassembly is required for now.
Very interesting breakthrough. Great work
I'm facing the same bootloader unlock in my infinix hot s 3. I believe I can use your procedure to unlock my device. And if necessary how to make changes to the config file? I will be expecting your reply soon. Thanks
Is it possible to explain how the config.img file is altered ? It might not be difficult to alter the last byte , but what does it mean to Change the overall checksum ? I have been trying to do something similar for a while , it would be great if you answered here or via PM , thank you
awab228 said:
Is it possible to explain how the config.img file is altered ? It might not be difficult to alter the last byte , but what does it mean to Change the overall checksum ? I have been trying to do something similar for a while , it would be great if you answered here or via PM , thank you
Click to expand...
Click to collapse
Fill first 32 bytes with 0x00, then calculate SHA256 checksum and paste the new checksum as hex value at the first 32 bytes.
hikari_calyx said:
Fill first 32 bytes with 0x00, then calculate SHA256 checksum and paste the new checksum as hex value at the first 32 bytes.
Click to expand...
Click to collapse
Thank you for taking the time to explain, great help and great effort, the last byte should be altered to 1 ? Or 0 ?
awab228 said:
Thank you for taking the time to explain, great help and great effort, the last byte should be altered to 1 ? Or 0 ?
Click to expand...
Click to collapse
1 for allow, 0 for disallow
do you have any fastboot rom or rawxml rom for this device ??
mine always reboot in bootloader mode.
malkabhai said:
do you have any fastboot rom or rawxml rom for this device ??
mine always reboot in bootloader mode.
Click to expand...
Click to collapse
We have full OTA zip of it.
You can use payload dumper + img2simg to convert it to fastboot images. If recovery mode working (including unofficial TWRP), you can also reboot your phone to recovery mode to sideload it.
PAN-141B-0-00WW-B03-update.zip
I was able to use "OEM Unlocking" from developer options and after starting at step 3, to obtain a full unlock. After I was also able to fully root my phone using the normal guide. I am running the latest security update (October 5 2019). No idea why this worked for me...
Hello,
I've got the Nokia 3.2 16gb variant. I can get it into edl mode but it seems to be in Sahara mode. How can I put it into firehose mode? Because I can't load anything using qfil.
Any help?
Missing pads
Any idea where these pads could be now? That does not seem to be there anymore?
Missing testpoint pads
piteer1 said:
Any idea where these pads could be now? That does not seem to be there anymore?
Click to expand...
Click to collapse
I has the same problem. Thanks in advance.
I don't see those test point in my mobile
Hi, does this work for Nokia 6.1 plus TA-1083? or do you have any trick for this too?
I am able to load phone in EDL Mode by making EDL Points short.
Just in case you read my comment, I have a emmc problem post, if you can help -
https://forum.xda-developers.com/nokia-6-1-plus/help/nokia-6-1-plus-edl-mode-emmc-failure-t4114507
ALCATEL 1B MEGATHREAD
( veken/seoul/TCL L7)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
STOCK ROM
Download
How to flash
TWRP
-Developement is halted due to technical challenges
SIM UNLOCK / CARRIER UNLOCK
Download STOCK ROM from above
Extract it and install Hex editor
Open file radiokiller.xml in hex editor
Copy line with partition "simlock"
Paste it into the file rawprogram0.xml
Flash rawprogram0 with QFIL and use loader.bin as firehose
Unlock succesful
ALCATEL MOBILE UPGRADE REGION LOCK BYPASS
Alcatel Mobile Upgrade is region locked and wont let you update to the latest version outside of RU
To bypass this, edit traceability.bin from the stock rom above. Change IMEIHERE with random numbers (or your imei) and then change GOD-5002F-2BALCZ12 to any region you like... for example GOD-5002F-2AARU12 and copy traceability line from radiokiller.xml to rawprogram0, then flash with QFIL
UNLOCKING BOOTLOADER / ROOTING
For now, it is not possible... However mentions of secret key is spread all around the phone partitions (mainly abl file)
So if you have any experience editing bootloaders you can unlock....
DISCLAIMER
IM NOT RESPONSIBLE FOR DAMAGED DEVICES BECAUSE U DIDNT FOLLOW THE INSTRUCTIONS
yo if you can give me a stock recovery.img i can build TWRP
notnoelchannel said:
yo if you can give me a stock recovery.img i can build TWRP
Click to expand...
Click to collapse
Stock recovery img is in the stock rom (click the download button). I already had one guy do it for me but he had problems compiling, but you can try. Also we cant unlock the bootloader (yet)
Hello. When i write this room i have a bootloop. I have alcatel 1b 5002h. Anybody have a clear rom for this device? On alcatel webside they dont have the files for this model. Anybody help me?
viper9595 said:
Hello. When i write this room i have a bootloop. I have alcatel 1b 5002h. Anybody have a clear rom for this device? On alcatel webside they dont have the files for this model. Anybody help me?
Click to expand...
Click to collapse
5002h model isnt compatible, due to it having different components than other variants. If you want to fix it, dm me on telegram. t.me/xinux360 or message me here on xda
edit: It actually is compatible
deleted, posted second reply by mistake
Hi I'm Liberia but my phone is not working here
KashiNEC said:
SIM UNLOCK
Click to expand...
Click to collapse
I need my sim card unlock
Leovace Cassell said:
I need my sim card unlock
Click to expand...
Click to collapse
Which model is it and what carrier is it locked to? You can find the model number under the battery. It should be 5002.-..........
Leovace Cassell said:
I need my sim card unlock
Click to expand...
Click to collapse
Also this only works if the phone is carrier locked. For example if it was sold by ATaT and you will try to insert a T-Mobile sim it wont work.... This will not magically remove pin code from the simcard
I am overwhelmed with the many types of models referenced by system within the firmware included with the device. If you access the following paths from an example MiXplorer file explorer, you will understand what I mean.
1- Go to /system/media/video
There you will notice multimedia related to what appears to be part of a promotion for various device models: TCL L7 5102P, Optus X Sight, Smart P11, TELSTRA Essential Plus 3, Alcatel 1B
All of them relatively similar, just a search on the web for each of them and the specifications will vary, they are almost related.
2- Go to /system/aio_custom/resources
there you will notice a sea of directories with information on Alcatel 1B models and maybe other models mentioned above. You can see for yourself there will be around 764 folders for quite a while, some with alphanumeric names I will cite some examples as there are too many:
5002A, 5002B, 5002D, 5002E, 5002F, 5002H...
Something that I have noticed in common within the various models mentioned in the 1st directory is that there is no reference to unlocking the bootloader, much less TWRP or any custom Rom. TCL has taken security on these devices seriously by limiting and hiding many things, mainly disabling OEM unlocking.
Due to technical limitations, and no further interest from other developers, im stopping any developement for this phone...
I have an Alcatel 1B (2022) 5031g and i can't understand why when I boot into fastboot mode with
Code:
adb reboot bootloader
and try
Code:
fastboot devices
nothing shows up. It's a new phone. Can someone help?
KashiNEC said:
ALCATEL 1B MEGATHREAD
( veken/seoul/TCL L7)
View attachment 5653599
STOCK ROM
Download
How to flash
TWRP
-Developement is halted due to technical challenges
SIM UNLOCK / CARRIER UNLOCK
Download STOCK ROM from above
Extract it and install Hex editor
Open file radiokiller.xml in hex editor
Copy line with partition "simlock"
Paste it into the file rawprogram0.xml
Flash rawprogram0 with QFIL and use loader.bin as firehose
Unlock succesful
ALCATEL MOBILE UPGRADE REGION LOCK BYPASS
Alcatel Mobile Upgrade is region locked and wont let you update to the latest version outside of RU
To bypass this, edit traceability.bin from the stock rom above. Change IMEIHERE with random numbers (or your imei) and then change GOD-5002F-2BALCZ12 to any region you like... for example GOD-5002F-2AARU12 and copy traceability line from radiokiller.xml to rawprogram0, then flash with QFIL
UNLOCKING BOOTLOADER / ROOTING
For now, it is not possible... However mentions of secret key is spread all around the phone partitions (mainly abl file)
So if you have any experience editing bootloaders you can unlock....
DISCLAIMER
IM NOT RESPONSIBLE FOR DAMAGED DEVICES BECAUSE U DIDNT FOLLOW THE INSTRUCTIONS
Click to expand...
Click to collapse
When I connect the phone at the last step I can not find a port in QFIL when the phone is connected. When you boot the phone to connect to QFIL what menu are you in? I get nothing when I hold vol up + down + power, but when I hold Vol up + power until logo and then let go of the power and continue to hold Vol up, the only menu I can get to seems to be Android recovery with reboot system now, apply update from sd, factory reset, clear cache partition, and power off.
This is a 2020 1b... what am I missing here? Thanks, for your time.
When I connect the phone at the last step I can not find a port in QFIL when the phone is connected. When you boot the phone to connect to QFIL what menu are you in? I get nothing when I hold vol up + down + power, but when I hold Vol up + power until logo and then let go of the power and continue to hold Vol up, the only menu I can get to seems to be Android recovery with reboot system now, apply update from sd, factory reset, clear cache partition, and power off.
This is a 2020 1b... what am I missing here? Thanks, for your time.
Warning:
This isn't my method and I haven't tested it myself, Im just posting it in case it helps someone.
Procedure was taken from this article, so beware of auto-translation to english.
Even if it uses the MTKroot application and this phone is Qualcomm, it looks legit as it installs the Qualcomm drivers during the process.
All credits go to the original author (thanks a lot!), just pasting this here in case the site goes offline in the future.
I don't take any responsability and I won't be supporting any bricked phones.
Test it under your own risk!
How to Root on TCL 20 5G Phone
In the tutorial below you can find an automatic process to root the TCL 20 5G smartphones, through which you will get access to the root in a few minutes.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Problems finding the boot.img file?, check
this.
What is it to do root?
Superuser or root is the usual name assigned to user accounts that have all rights in all forms of access, both monousual and multi-user.
Rooting a device is a method that makes it easier for the user of a computer with Android to gain privileged access to the system in a similar way to administrative permissions in Linux or Unix systems, allowing to cross any system barriers as well as software that could be established by the manufacturer or network operator.
Benefits of rooting for your TCL 20 5G
Remove all types of Bloatware simply and delete potentially useless system applications.
Being able to get extra storage space.
Customize system in-depth adjustments, such as releasing TCL 20 5G, repairing the IMEI of our TCL 20 5G and MAC steering, overclock among many possibilities.
Use programs designed only for those cell phones that have superuser permits.
Adapting or creating new partitions in memory (Watch out, doing this can be extremely dangerous to device integrity).
Create bakups or backups of the partition system or export the rom.
Precautions and warnings that we must always keep in mind
The mobile device shall cease the coverage of the guarantee granted by the manufacturer.
Risk that harmful applications can get permission from Superuser.
Threat of damage or deterioration of data during the procedure, therefore I recommend you in any case to back up before starting the root.
The Firmware of your TCL 20 5G may be harmed, it is recommended to be sure to be able to obtain a valid copy of the firmware if necessary.
Support for OTA upgrades will end up cancelled.
Conditions of the procedure
PC with Windows XP system or subsequent, architectures 32/64bits.
USB to Micro USB data cable.
Download to your computer the latest version of MTKroot v2.5.5 tool for your TCL 20 5G.
Download the original firmware for your terminal from where you will have to extract the boot component if possible from the manufacturer's online technical service.
If you fail to find an original TCL 20 5G firmware as an alternative you can also dispose of the boot component directly from your phone easily by taking the steps of this tutorial.
Settings to be made on the TCL 20 5G phone
The first thing we will have to do, obviously, will be to configure the necessary adjustments for the process, which basically consist of activating USB debugging and unlocking OEM.
These configurations are included in the development menu, which you must have unlocked in advance by pressing 7 times continuously on top of;
Configuration-"Downer information - version of the software or compilation number.
How to root the mobile phone TCL 20 5G easily
First of all you must unzip the contents of the package previously downloaded to the Windows computer desktop and then run MTKroot v2.5.5.
Run MTKroot v2.5.5 for TCL 20 5G
Click Drivers - Qualcomm and complete the installation of the respective drivers.
Install Qualcomm drivers for TCL 20 5G
Take these exact same steps to implement the installation of ADB drivers.
Note: The MTKroot v2.5.5 tool incorporates all the updated drivers that are required by TCL 20 5G.
Then connect your team TCL 20 5G to the computer using a USB data cable and click on USB restart.
Click on the top left in No boot. - Load, add the boot.img file and then click Process patch.
Automatically the Magisk Manager application will be started on your TCL 20 5G, make the indications that will be on your screen to patch the boot.
Then you have to click on ADB Test and when you can read the message - Recognized Device you must press the Go to Fastboot button.
TCL 20 5G Restart USB . Test ADB . Fastboot
Wait for the meantime the TCL 20 5G restart with bootloader mode, then click the Test Fastboot button.
Again wait until the message comes out - Device found to be able to proceed to the next step.
Release the bootloader from TCL 20 5G cell phonesIn the next step you must unlock the bootloader to your TCL 20 5G, which you will do in a completely automated way.
Although remember that you must omit that operation if you had done it before.
Click on Test Bootloader to ensure your status is assured.
Check to bootloader TCL 20 5G
If you want to open the bootloader to TCL 20 5G simply click Unlock Bootloader -. Accept and then complete the suggestions that will be on the 20 5G TCL screen.
Remember to press the button upload the volume to unlock.
Unlock bootloader on TCL 20 5G
Note: When you release the bootloader, your smartphone will be resected to the default state.
Consider it appropriate to create a backup or simply copy all the files, contacts, photos and other data within an external memory.
After releasing the bootloader the next step will be to complete the process and finally leave your phone with the corresponding root privileges.
Head to the top of the left of the software and choose the rooting option, then click the Root button at the bottom.
Select Root TCL 20 5G
In less than 5 seconds the device will be rooted, so the word "OK" projected in the terminal and in the MTKroot v2.5.5.
Later click the Exit button to return your TCL 20 5G cell phone will restart the Android system.
Once the TCL 20 5G restarts completely, click Apps - Install Magisk and make sure you if the Magisk Manager app is effectively on your phone desk.
In order for the Magisk Manager application to be able to function properly, you must first connect TCL 20 5G to the Internet, either by wi-fi or mobile data.
To finish the tutorial you just click on Check Root - then accept and nothing else.
Test Root TCL 20 5G
Note: In case the Magisk Manager App fails to install at the first, click the Uninstall button, wait two seconds and again do once you click on the Magisk Instant button.
Summary Steps
Summary of the Rootear TCL 20 5G steps
Start MTKroot v2.5.5 utility and connect your TCL 20 5G to your PC.
Restart your TCL 20 5G in fastboot mode by clicking on the Go to Fastboot button - Test Fastboot.
If necessary, unlock the bootloader by clicking Liberate Bootloader.
Finally select the root wing option and press the Root button.
I thought MTKRoot only worked on mediatek chipsets. These phones have Qualcomm cpus and gpus.
We dont have file boot.img to do it
Comment edited since information in it was not useful to the thread
The situation looks like this: someone is messaging me about tcl-t810s, which is the model of my phone, and they need rom tcl-t810s, but they are giving me tcl-t767h rom instead. Could you please clarify what you meant by that? Perhaps, you could provide more information about what you are trying to achieve and why you are suggesting the rom for a different phone model. This could help us determine if the tcl-t767h rom is compatible with my tcl-t810s model and if it could solve the problem you are looking for.
DoctorBooty said:
^
Click to expand...
Click to collapse
Profesornauk said:
The situation looks like this: someone is messaging me about tcl-t810s, which is the model of my phone, and they need rom tcl-t810s, but they are giving me tcl-t767h rom instead. Could you please clarify what you meant by that? Perhaps, you could provide more information about what you are trying to achieve and why you are suggesting the rom for a different phone model. This could help us determine if the tcl-t767h rom is compatible with my tcl-t810s model and if it could solve the problem you are looking for.
Click to expand...
Click to collapse
I see, I wasn't aware that they were different models. I apologize. I'll delete my previous comment
DoctorBooty said:
I see, I wasn't aware that they were different models. I apologize. I'll delete my previous comment
Click to expand...
Click to collapse
Do you have contact with Gabby or did he tell you how to access the boot.img on TCL? That would be some clue
Profesornauk said:
Do you have contact with Gabby or did he tell you how to access the boot.img on TCL? That would be some clue
Click to expand...
Click to collapse
The files were in a paid site. Gaby happened to have a subscription in that site and she shared it after I requested it. I can't remember the site's name but it only had those files regarding TCL models
link to the latest version of MTKroot v2.5.5 tool is no longer valid, need an updated link if possible
update: found this link, seems to be legit MTKroot v2.7b (2022): https://drive.google.com/u/0/uc?id=1wnXGGca-uznK1bgG4WLSREnZ_nQXuEsY&export=download
Androiderz said:
link to the latest version of MTKroot v2.5.5 tool is no longer valid, need an updated link if possible
update: found this link, seems to be legit MTKroot v2.7b (2022): https://drive.google.com/u/0/uc?id=1wnXGGca-uznK1bgG4WLSREnZ_nQXuEsY&export=download
Click to expand...
Click to collapse
broken links