I hard bricked my Mi Pad 1 (Mocha) 5 year ago by Re-Partition by TWRP > Error.
Today i sucessfully recovered it by :
APX Drivers > Nvidia Usb Boot Drivers > Mi Flash Tool 2015 > Official Fastboot Rom Flashed With Same Tool > TWRP UnBricked Repartitioned Bad Tables By : mocha_repartition_stock_by_RahulTheVirus > Re Flashed Official Rom by turning on Fastboot Mode and Flash Same Rom by Mi Flash Tool 2015.
On Win10 (Enabling Unsigned Drivers & Got Some "Nvidia Usb Boot " Drivers From Mi Tool 2022 's Shared Folder)
You can ask Used Files from me (ajaybnl on gmail)
Hello, i got bricked by re-partition too. But my Mi-Recovery is corrupted and I can't go to fastboot either. My pc cant detect it either
Related
Hi xiaomi users
if you bricked your mi5 after wrong flash or something went wrong and you not able any more to start you device normaly, so you'r in the correcte thread to unbrick your mi5 with the correcte fastboot rom and miflash beta
whatever the cause of bricking your device( in my case no boot, no recovery mode and no fastboot mode just black screen),if it connected to your laptop and show qualcomm QHsusb QDloader 9008 in devices manager then you have big opportunity to make it alive again :fingers-crossed:
1 :
download and install xiaomi flashing tool miflash beta frome here : http://en.miui.com/forum.php?mod=at...jYmIxNDZifDE0NjYzMTc1OTZ8MzEyNzU5MnwyODE5Nzk=
2 : download the correct fastboot rom for your xiaomi mi5 from here : http://update.miui.com/updates/v1/fullromdownload.php?d=gemini&b=X&r=cn&n=
note: i have chosen the latest china dev fastboot rom to unbrick my mi5,other fastboot roms not worked for me
put your fastboot rom to c/ drive and extract it ,not on desktop or other extension
3 : enter on fastboot mode by pressing power and volume down you will see logo of xiaomi its fastboot mode,if you cant access fastboot mode just connect you mi5 to your laptop it will detect it as qualcomm driver
4 : open miflash beta and check flash all,chose you rom in c drive then clik refresh button you will se your device as com port,now start flash by cliking on flash button and be patient it will take over 5 min, when success unplug your and start your phone,if not start just let it connected to your laptop over 30 min it will start automatically
now enjoy your mi5 with latest miui8 china developer,
hit thanks buton if im help you :good:
Hi guys, i was trying to flash a global stable rom with edl and miflash but something went wrong and miflash says that memory was unsifficient. What should i do? I'm on windows 10 64bit with all adb installed (i think). I even disabled the driver license. I didn't do nothing since the error and i don't know if i should unplug the cable or whatever.
hey, it says flash done (sucessful), but my phone still with black screen and nothing happens, should i just wait?
Hi guys, im not sure if this will help you or not but my phone bricked last night and ive manage make it work again by following this method but it little bit different so when it my phone successfully flashed, i just left it untill the batteries is empty by left it all night (before bricked the batteries was 50% i think), maybe it will take longer then mine and if this method work it showing battery empty indicator like normal phone.. ps: when my phone bricked i had no fastboot no recovery no edl, just black screen and red light indicator.. good luck guys
i have used the test point method and successfully flashed the latest Rom V8.5.2.0 with the latest MiFlash 201612220. after flash done, the phone still cannot turn on... anybody can help???
I have to write a Tutorial to Downgrade from MiUi 8 7.3.3.0
I am a Service Technician . One day Customer brought Mi5 to me to bypass MI account Lock.
he factory data reset device and forgot mi account password. I thought solution is easy.
Here is Solution
boot device to EDL mode ,
Bypass account Verification with BST Dongle ,
Local Data Restore with other account backup file
All done......
But , In this device , Miui Version is 7.3.3.0 ( Android 7.0 )
I have a crisis , I can not boot this device to EDL mode . if device is in bootloader unlock state , I can erase aboot partition from fastboot and device will still at QDLoader 9008 mode. Now device is in bootloader locked.
so I decided to use Hardware Test Point to boot EDL Mode . Open Backcover , remove battery connector and reconnect it , short Two Test points and connect device to PC . Device connected in 9008 mode [ if device not detect please check driver ] . Now Flash Firmware Via Mi Flasher. boot device normally and bypass
The message what I wanna to pay is Android 7.0 disable boot to EDL Mode from ADB command , fastboot command and EDL boot cable methods. If you wanna to Downgrade with bootloader locked state , please use Test points.
How to disassemble Xiaomi Mi5
https://www.youtube.com/watch?v=RJysUCuBYgo
What is EDL boot Cable ?
http://xiaomitips.com/guide/miui-deep-flash-engineering-cable-solution-to-non-edl-device/
How to Flash Firmware from QDLoader 9008 mode
https://forum.xda-developers.com/mi-5/how-to/guide-t3449859
Phyo Nyi Nyi said:
I have to write a Tutorial to Downgrade from MiUi 8 7.3.3.0
I am a Service Technician . One day Customer brought Mi5 to me to bypass MI account Lock.
he factory data reset device and forgot mi account password. I thought solution is easy.
Here is Solution
boot device to EDL mode ,
Bypass account Verification with BST Dongle ,
Local Data Restore with other account backup file
All done......
But , In this device , Miui Version is 7.3.3.0 ( Android 7.0 )
I have a crisis , I can not boot this device to EDL mode . if device is in bootloader unlock state , I can erase aboot partition from fastboot and device will still at QDLoader 9008 mode. Now device is in bootloader locked.
so I decided to use Hardware Test Point to boot EDL Mode . Open Backcover , remove battery connector and reconnect it , short Two Test points and connect device to PC . Device connected in 9008 mode [ if device not detect please check driver ] . Now Flash Firmware Via Mi Flasher. boot device normally and bypass
The message what I wanna to pay is Android 7.0 disable boot to EDL Mode from ADB command , fastboot command and EDL boot cable methods. If you wanna to Downgrade with bootloader locked state , please use Test points.
How to disassemble Xiaomi Mi5
What is EDL boot Cable ?
http://xiaomitips.com/guide/miui-deep-flash-engineering-cable-solution-to-non-edl-device/
How to Flash Firmware from QDLoader 9008 mode
https://forum.xda-developers.com/mi-5/how-to/guide-t3449859
Click to expand...
Click to collapse
Did you make it?
Mi wifi and bluetooth are NOT working!
I try to put the wifi on and the buttonn just returns to his position, same thing occurs with the bluetooth... Why is this? Is this the antenna that is break or maybe something about the software...?? I have the latest Golbal verison 8.2.2.0
Hi all as the title suggests is there anyone who has a fairly detailed Unbricking guide or a way to reflash the stock meizu software via fastboot, QFIL or anything that has worked.
The current problem I face is I have the m6 note with Chinese firmware and wanted to flash global firmware via flash fire as the TWRP APK didn't work for me . I can't enter recovery and fastboot gives me a failed message (remote: partition flashing is not allowed ).
Thank you in advance
its for m3 but you may try http forum flymeos com/forum.php?mod=viewthread&tid=35810&highlight=unbrick
also this one for our phone http://forum flymeos.com/thread-38489-1-1.html
This one is from original flyme os forum FAQ
Q: Recover soft-Bricked device (for those can't access the system)
A: Access the Recovery mode:
1.Turn Off the Phone (ensure that you have more than 20% battery)
2.Press and Hold Volume UP + Power
3.release as soon as you see the Meizu logo
Download firmware from http://www.flymeos.com/firmware.html, Copy the update.zip (naming is important) on your phone and select System Upgrade + Clear Data. As soon as it's connected a "Recovery Drive" will pop up. Now, connect your phone (still in Recovery Mode) to your Windows PC. As soon as you are there, you are just fine.
hi thanks @consumimur , but the first method is for mediatek devices isn't it? The second method doesn't work for me at all because i can't enter my recovery , i need some sort of flashing too QFIL doesn't work for well at the the one i tried (2.0.0.5) as it ask for "Rawprogram.xml" and "patch* " which is not in the update.zip
Yusuf.T said:
hi thanks @consumimur , but the first method is for mediatek devices isn't it? The second method doesn't work for me at all because i can't enter my recovery , i need some sort of flashing too QFIL doesn't work for well at the the one i tried (2.0.0.5) as it ask for "Rawprogram.xml" and "patch* " which is not in the update.zip
Click to expand...
Click to collapse
http://4pda.ru/forum/index.php?showtopic=843179&view=findpost&p=69341915
New https://www.movilesdualsim.com...oros/meizu-m6-note-sd625.1222/
Enviado desde mi M6 Note mediante Tapatalk
i think thats what you are looking for
https://firmwarefile.com/meizu-m6-note-m1721
Folks, today I've had the fortune to brick (corrupting the devinfo partition, screwing up recovery and OS boot as well) and unbrick (stock recovery and OS restored and working perfectly) my Meizu M6 Note without opening it up. If anyone is still interested, instructions are here:
https://forum.xda-developers.com/showpost.php?p=77964079
Hi, I have a problem with my m6 note. I have WIFI MAC address between 2: 00: 00: 00: 00: 00 and I can not turn on wifi. I found a solution to upload persist.img and this should help. However, I can not find the persist.img file anywhere. Can you help?
consumimur said:
This one is from original flyme os forum FAQ
Q: Recover soft-Bricked device (for those can't access the system)
A: Access the Recovery mode:
1.Turn Off the Phone (ensure that you have more than 20% battery)
2.Press and Hold Volume UP + Power
3.release as soon as you see the Meizu logo
Download firmware from http://www.flymeos.com/firmware.html, Copy the update.zip (naming is important) on your phone and select System Upgrade + Clear Data. As soon as it's connected a "Recovery Drive" will pop up. Now, connect your phone (still in Recovery Mode) to your Windows PC. As soon as you are there, you are just fine.
Click to expand...
Click to collapse
thank you so much for this @consumimur. It saved me from going down a rabbit hole, after getting a bootloop with meizu x8 m852h, having followed these instructions:
Meizu X8 - Обсуждение - 4PDA
Meizu X8 - Обсуждение, Смартфон, 6.2"
4pda.to
OP:
ttps://4pda.to/forum/index.php?showtopic=965227
author: 555frost555
Download (litter, files lost) archive and unpack to the root of the C drive
Charge your phone at least 50%
Disable signature verification using the following instructions:
For WINDOWS 7-8: Run Command Prompt as administrator, execute two commands in turn and reboot
Code:
bcdedit.exe -set loadoptions DISABLE_INTEGRITY_CHECKS
bcdedit.exe -set TESTSIGNING ON
For WINDOWS 10: press start, hold shift, press shutdown computer. The computer will boot into a recovery screen. Select custom boot options and disable driver signature verification.
PS personally, I recommend installing on win7 or 8.1 - less haemorrhoids
Install QFIL
Install Qualcomm 9008 driver
Install standard drivers from the phone (connect to the computer in the CD-drive mode and install from there)
Run QFIL and select "flat build"
Select programmer: "prog_firehose_ddr.elf"
Select XML: "rawprogram0.xml"
Select XML: "patch0.xml"
Turn off the phone
Clamp VolUp + VolDn + Power
The Meizu icon appears, followed by a black screen. The keys can be released.
Connect your phone to your computer. It should be detected as Qualcomm 9008.
Press DOWNLOAD
QFIL is very moody about the system and drivers. If you did everything correctly, but you get an error while flashing, then you need to try it on another computer. Preferably on where windows was recently installed ...
When FINISH is written in QFIL, you can turn off the phone and restart it by holding down the power key until it vibrates.
For WINDOWS 7-8: Run Command Prompt as Administrator, execute two commands in turn and reboot
Code:
bcdedit.exe -set loadoptions ENABLE_INTEGRITY_CHECKS
bcdedit.exe -set TESTSIGNING OFF
I did this with the QFIL archive linked in https://4pda.to/forum/index.php?act=findpost&pid=88712568&anchor=Spoil-88712568-6
and received a bootloop on meizu x8 m852h. Then I did what @consumimur wrote
I did this on a windows 10 machine
I did this on a w10 machine
This is unbrick firmware. Enjoy free. Download Unbrick Meizu M6 firmware.
Good Evening,
I have an Android Phone REDMI 6A from the licensed distributor in Indonesia.
The warranty for my phone already expired and I'm tried to Root my REDMI 6A.
I'm searching for the step to Root and here what I get:
1. I need to click 7 times in about to open developer option
2. Allow the USB Debugging
3. Do the unlock bootloader with Mi Unlock (I'm already success and when I'm reboot in below screen there is a text "unlocked"). But it's weird when I see another thread that say for the unlock we need permission from Xiaomi that needs xx days to unlocked legally. But in my case I don't need to wait for xx days.
4. The next step for root is I need to flash with Mi Flash Tools and here is the nightmare when I'm follow the steps and in the steps stated not tell to choose "clean all". In my case the choose for Mi Flash is default in "Clean and Lock" that you can see in the right down below from Mi Flash Tools App.
5. That's it. Flash is done with the option "Clean and Lock" the phone is reboot and Ohh my Goshhh..... the Phone is not working and screen display to Mi Recovery with error "MIUI Versions can't be installed in this device"
From what I read in many threads the situation I'm in is :
1. Flash wrong ROM that makes my Phones Bricked and the protection from Xiaomi is on
2. The bootloader that Unlocked now is Locked and that makes the USB Debugging off too
I'm already do this:
1. Used the SP Flash Tools v 5.1924 with information for SP Flash tool:
a. Download Agent : MTK_AllInOne_DA.bin or MTK_AllInOne_DA_4-19_-signed.bin
b. Scatter Loading files : MT6765_Android_scatter.txt from many ROM Fastboot (Global, China and Rusia)
c. auth_sv5.auth
2. Test in SP Flash Tools "Download" and click the download and then I'm hold volume + in my phone (the battery is disconnected) and then connect the phone use USB cable.
When I'm see the device manager Mediatek USB Port is appear but in SP Flash get error BROM error status_brom_cmd_send_da_fail (0xC0060005)
3. Test the "Format" option in SP Flash Tools with option "Manual Format Flash" and change the data needs from the scatter.txt:
a. Begin Address : 0x5588000
b. Format Length : 0x100000
3. Used Minimal ADB and Fastboot and use command:
a. ADB devices : not work --> I think it's because the usb debugging off. Before when I'm try this when my phone still on this command list the
detail of my devices
b. Fastboot devices : It's work when I can go to fastboot screen (it depends on luck when I'm try the SP Flash tools and I will modified it with
Volume - & Power before connect to PC with usb cable)
c. Fastboot oem device-info : not work
d. Fastboot unlock OEM : not work
e. Fastboot reboot : work but still stuck at Mi Recovery
4. Used Mi Phone Assistant (condition in Mi Recovery choose Connect with Mi Phone) and do the flash ROM used Global, China, and Rusia ROM and still not work.
It works for miui_HM6AGlobal_V11.0.7.0.PCBMIXM_755e2b7216_9.0 and in progress to 100 % but after reboot will stuck to Mi Recovery again.
5. Try Mi Unlock but it's not working
6. When I get to Fastboot sceen by luck I try this too:
a. Used Mi Flash 2017.4.25 with option "Clean All" used ROM (Global, China, Rusia) for flash. Click refresh and the devices is appear and when
click Flash (after fill the path ROM) it's error
b. Used ADB to know the status of my devices (locked bootloader, etc) with command fastboot oem device-info but error
I read if the condition is like this, I'm must flash it to original ROM or China Version. But please tell me how I do that?
I'm already searching and download many ROM (fastboot and recovery) but when used in Mi Phone Assistant to flash ROM it's still not working.
Please tell me if there is some way to restore my REDMI 6A to normal condition (no need for root first).
The condition I'm in now:
1. I have a Mi Account
2. Sometimes by luck I can get to Fastboot screen
Kindly appreciate if you can solve this problem.
Looks like you wiped or formatted your entire phone. I've been in this situation before (RIP my Lenovo A7000a). But i have some experience with SP flash tool.
1. Go to options and go to the download section, and enable USB checksum and storage checksum
2. Load the scatter file
3. Give a checkmark on everything from preloader to userdata
4. Format the phone on the format section(optional but recommended)
5. Then click the download button on download section (important: make sure you haven't plugged your phone)
6. Plug your phone to your PC
7. Wait until the flashing process is done
8. After the flashing process is done you're you will prompted with a green checkmark image
9. Done. It should boot and work properly
---------- Post added at 10:38 AM ---------- Previous post was at 10:18 AM ----------
There's a list of SP flash tool errors and how to solve it here. Maybe it will help you https://forum.hovatek.com/thread-439.html
Hello, If your bootloader is Unlocked, You can go to fastboot & type this command
fastboot erase recovery
fastboot flash recovery twrpname.img
Replace twrp name with name of custom recovery.
Now type : fastboot reboot recovery
Now it will boot in twrp , install any custom ROM from there.
PS: Already told, requires a Unlocked BL
I have Redmi note note 5 pro and I rooted my device successfully on the version miui 11.0.3.0 with twrp recovery
and after root my device is unable to connect with any pc and laptop (tried everything from trying on multiple pc to buying new usb cables)
But It doesn't bothered me so I did nothing about it...but yesterday I tried to update my device to version miui 11.0.5.0 using full recovery rom but due to that my root access is gone with installing stock recovery .
And now every time when I try to enter into fastboot mode, it is not detecting my device (I've tried installing fastboot adb drivers and once again tried changing usb cable but it still not detecting).
Please help me I only want to install any custom recovery which help me root my device
Device - Redmi Note 5 pro
Android version - 9
Miui version - 11.0.5.0
USB debugging is on
bootloader is unlocked