Related
Following up a guide to install CWM, I bricked my Huawei G610. It is on bootloop now. No Fastboot access too.
Any hardware key combination to re-install stock firmware including Recovery?
I recall few phones had a process to put ROM on SDcard and with special hardware key combinations, it used to re-flash fron SDcard.
Help will be appreciated.
sadnblueish said:
Following up a guide to install CWM, I bricked my Huawei G610. It is on bootloop now. No Fastboot access too.
Any hardware key combination to re-install stock firmware including Recovery?
I recall few phones had a process to put ROM on SDcard and with special hardware key combinations, it used to re-flash fron SDcard.
Help will be appreciated.
Click to expand...
Click to collapse
Check on need Rom G610 U20, Download ROM, unzip, theres a doc. file guide attached how to install..
Joe_Live said:
Check on need Rom G610 U20, Download ROM, unzip, theres a doc. file guide attached how to install..
Click to expand...
Click to collapse
Already followed that but it doesn't go to upgrade mode. Tried 2 SDcards so shouldn't be a bad SDcard issue.
If I plug the computer with Laptop, it detects phone but phone keeps rebooting hence I can't control the phone through SP Flash or ADB or other tools. Even in Fastboot mode, it restarts.
Same issue here
Any Luck with your device?
stuck in Bootloop
I faced the same problem after trying to flash TWRP recovery img. I used MobileUncle Tools to flash it. It asked Reboot in recovery, I pressed OK. and it never ran into recovery mode. Its stuck in bootloop now. Any way out? Have tried through ADB but fastboot doesn't work...
My problem was solved by Huawei. I claimed my warranty!
To solve this issue use sp flash tool without batry
Sent from my HUAWEI G610-U20 using Tapatalk
Help
thesumanthapa said:
I faced the same problem after trying to flash TWRP recovery img. I used MobileUncle Tools to flash it. It asked Reboot in recovery, I pressed OK. and it never ran into recovery mode. Its stuck in bootloop now. Any way out? Have tried through ADB but fastboot doesn't work...
Click to expand...
Click to collapse
I have encountered the same problem Is there any solution
sadnblueish said:
Already followed that but it doesn't go to upgrade mode. Tried 2 SDcards so shouldn't be a bad SDcard issue.
If I plug the computer with Laptop, it detects phone but phone keeps rebooting hence I can't control the phone through SP Flash or ADB or other tools. Even in Fastboot mode, it restarts.
Click to expand...
Click to collapse
hi I got the same problem today. can you tell me how did you resolve your issue long time ago.
thanks
Abbas
mobdanish said:
hi I got the same problem today. can you tell me how did you resolve your issue long time ago.
thanks
Abbas
Click to expand...
Click to collapse
Over 2 years now and I probably have changed 4 phones. Don't remember. But to help you. you may try this:
http://forum.gsmhosting.com/vbb/f810/huawei-g610-u20-bootloop-problem-1776731/
my phone isn't working, every time i open my phone it says "unfortunately, dev stopped working". and there are too many viruses that keeps on downloading. any idea how to fix this? huawei-g610-U20
Hi guys. I got the Tmobile LG G2 and it was running on Android 4.4.2 LG G2 D80110c. Then I changed the dpi by editing the build.prop via root explorer up but when the device reboots, it shows system force close and I basically cannot do anything. I realized that my TWRP recovery hadn't installed successfully and also I think download mode is not working. Computer recognizes the device when it is on... Can someone please tell me how to unbrick my device? Is there a way to install TWRP at the current condition of the phone? I think I cannot use lg flashtool because that requires the phone to be in download mode, while mine can't get in download mode...please help! thank you!
Edit: also when I try to hard factory reset the device it shows: ERROR: boot certification error and it gets stuck in black screen.
What I can think of is a way to manually install TWRP via adb or manually flash a kernel that supports custom dpi, but the only problem is that I don't know how to do that...
brickedvice said:
Hi guys. I got the Tmobile LG G2 and it was running on Android 4.4.2 LG G2 D80120c. Then I changed the dpi by editing the build.prop via root explorer up but when the device reboots, it shows system force close and I basically cannot do anything. I realized that my TWRP recovery hadn't installed successfully and also I think download mode is not working. Computer recognizes the device when it is on... Can someone please tell me how to unbrick my device? Is there a way to install TWRP at the current condition of the phone? I think I cannot use lg flashtool because that requires the phone to be in download mode, while mine can't get in download mode...please help! thank you!
Edit: also when I try to hard factory reset the device it shows: ERROR: boot certification error and it gets stuck in black screen.
What I can think of is a way to manually install TWRP via adb or manually flash a kernel that supports custom dpi, but the only problem is that I don't know how to do that...
Click to expand...
Click to collapse
theres several things you could do.. try srk tools to try and fix twrp, or fix download mode using nuke download.. i dont know how to i just know theres a way to do it.. if other fails and it doesn not go into download mode then you must short circuit the motherboard.... then look at thread g2 hard brick fix..
here but try other first as this one you have to open phone..
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
raptorddd said:
theres several things you could do.. try srk tools to try and fix twrp, or fix download mode using nuke download.. i dont know how to i just know theres a way to do it.. if other fails and it doesn not go into download mode then you must short circuit the motherboard.... then look at thread g2 hard brick fix..
here but try other first as this one you have to open phone..
http://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Click to expand...
Click to collapse
thanks for the prompt reply! is this the srk tools you are referring to: http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076 ?
also what is nuke download? Thanks in advance.
Edit: nvm I read what nuke download mode is (when no recovery and can't boot). I will try it now and see if it helps...
brickedvice said:
thanks for the prompt reply! is this the srk tools you are referring to: http://forum.xda-developers.com/lg-g2/development/tools-srk-tool-useful-toos-lg-root-twrp-t3079076 ?
also what is nuke download? Thanks in advance.
Click to expand...
Click to collapse
yes.. and its a way to force or fix device to enter download mode.. like i said ive never used it but i know it might help. if it fails then you must open the phone .. and short circuit the motherboard.. good luck. :fingers-crossed:
raptorddd said:
yes.. and its a way to force or fix device to enter download mode.. like i said ive never used it but i know it might help. if it fails then you must open the phone .. and short circuit the motherboard.. good luck. :fingers-crossed:
Click to expand...
Click to collapse
I don't think my phone is hard bricked. USB debbuging is on and computer recognizes the device when it boots up. I simply don't know how to install twrp via adb commands or alternative methods ... or how to manually flash a custom kernel that would allow normal device boot up when dpi is changed.
brickedvice said:
I don't think my phone is hard bricked. USB debbuging is on and computer recognizes the device when it boots up. I simply don't know how to install twrp via adb commands or alternative methods ... or how to manually flash a custom kernel that would allow normal device boot up when dpi is changed.
Click to expand...
Click to collapse
well me neithe LOL.. but i think you can fix recovery with srk. i think.. read and i think you can fix that.. ive never used it..
raptorddd said:
well me neithe LOL.. but i think you can fix recovery with srk. i think.. read and i think you can fix that.. ive never used it..
Click to expand...
Click to collapse
lol I used the srk tool but now i got this error:
Critical Error!
---------------------------------------------------------------------------
DemiGod Crash Handler : Critical Error!
Press Key to Choose Dload Mode or Reboot
1) Volume up : Dload Mode.
2) Volume Down: Reboot.
If u choose Dload Mode.
please do following action.
1) Dload Mode. please Connect USB
2) Get the Ram Dump image using QPST Configuration.
phone is in bootloop if I decide to reboot; while if I decide to go in download mode, it doesn't do anything...
brickedvice said:
lol I used the srk tool but now i got this error:
Critical Error!
---------------------------------------------------------------------------
DemiGod Crash Handler : Critical Error!
Press Key to Choose Dload Mode or Reboot
1) Volume up : Dload Mode.
2) Volume Down: Reboot.
If u choose Dload Mode.
please do following action.
1) Dload Mode. please Connect USB
2) Get the Ram Dump image using QPST Configuration.
phone is in bootloop if I decide to reboot; while if I decide to go in download mode, it doesn't do anything...
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g2/help/demigod-crash-handler-critical-error-t3108512/page2
https://www.youtube.com/watch?v=x1mUpwfEeDo
raptorddd said:
http://forum.xda-developers.com/lg-g2/help/demigod-crash-handler-critical-error-t3108512/page2
https://www.youtube.com/watch?v=x1mUpwfEeDo
Click to expand...
Click to collapse
I saw those I just can't get it to be recognized by the computer. Did the guy in the video try the hard brick fix from XDA? It is not very clear how he gets his laptop to recognize the device
brickedvice said:
I saw those I just can't get it to be recognized by the computer. Did the guy in the video try the hard brick fix from XDA? It is not very clear how he gets his laptop to recognize the device
Click to expand...
Click to collapse
i do not know either.. shortening the mother board is to enter download mode..
brickedvice said:
Hi guys. I got the Tmobile LG G2 and it was running on Android 4.4.2 LG G2 D80110c. Then I changed the dpi by editing the build.prop via root explorer up but when the device reboots, it shows system force close and I basically cannot do anything. I realized that my TWRP recovery hadn't installed successfully and also I think download mode is not working. Computer recognizes the device when it is on... Can someone please tell me how to unbrick my device? Is there a way to install TWRP at the current condition of the phone? I think I cannot use lg flashtool because that requires the phone to be in download mode, while mine can't get in download mode...please help! thank you!
Edit: also when I try to hard factory reset the device it shows: ERROR: boot certification error and it gets stuck in black screen.
What I can think of is a way to manually install TWRP via adb or manually flash a kernel that supports custom dpi, but the only problem is that I don't know how to do that...
Click to expand...
Click to collapse
This thread here : http://forum.xda-developers.com/showthread.php?t=2449670 might help you installing twrp via adb
tried to flash my H901 but failed.
I cannot recover it in any way.
When it turns on it loops on the LG logo and a message: boot verification fail!
On Hard Reset it keeps looping on the same screen
On LG Bridge there is a message: Cannot check internal storage on your phone
On LG Flash Tool with H90120e_00_0316.kdz: error connecting to server
On LG UP with TotbypassFRPlgh901.tot: Antirollback version is smaller than device version
On fastboot flashing stock boot.img: writing 'boot'... FAILED (remote: unknown command)
I don't know what else to do, please help!!!
rubecker said:
tried to flash my H901 but failed.
I cannot recover it in any way.
When it turns on it loops on the LG logo and a message: boot verification fail!
On Hard Reset it keeps looping on the same screen
On LG Bridge there is a message: Cannot check internal storage on your phone
On LG Flash Tool with H90120e_00_0316.kdz: error connecting to server
On LG UP with TotbypassFRPlgh901.tot: Antirollback version is smaller than device version
On fastboot flashing stock boot.img: writing 'boot'... FAILED (remote: unknown command)
I don't know what else to do, please help!!!
Click to expand...
Click to collapse
I recently did this today and I used the kdz method. Good luck
http://forum.xda-developers.com/lg-v10/general/guide-lg-v10-stock-firmware-to-stock-t3224170
sensimila said:
I recently did this today and I used the kdz method. Good luck
http://forum.xda-developers.com/lg-v10/general/guide-lg-v10-stock-firmware-to-stock-t3224170
Click to expand...
Click to collapse
I tried using LG Flash Tool with H90120e_00_0316.kdz... it gave the connecting to server error. I had read that this is normal, that I should wait... I waited twice, overnight, and nothing happened.
Did you have success? if so, which version of Flash Tool did you use, with which specific kdz file? and what is your phone version?
Thank you for your input, I will try again using the KDZ I have.
This happened to me and I was able to unbrick. You have to get into download mode by connecting your phone to your computer and just hold the volume up button before it loops again. Then I was able to re-flash the kmz in download mode with LGUP.
What happened is I forgot to fully unlock the bootloader again after flashing the kmz. You have to do the fastboot portion as well (fastboot oem unlock). Then you can flash the tot file and continue the root process.
rubecker said:
I tried using LG Flash Tool with H90120e_00_0316.kdz... it gave the connecting to server error. I had read that this is normal, that I should wait... I waited twice, overnight, and nothing happened.
Did you have success? if so, which version of Flash Tool did you use, with which specific kdz file? and what is your phone version?
Thank you for your input, I will try again using the KDZ I have.
Click to expand...
Click to collapse
Without going into further detail. iMO the lgflash tool doesn't work. Use the LGUP tool instead. And follow those instructions on the link I posted. Lgflash tool is garbage..lol
Sent from my LG-H901 using Tapatalk
sensimila said:
Without going into further detail. iMO the lgflash tool doesn't work. Use the LGUP tool instead. And follow those instructions on the link I posted. Lgflash tool is garbage..lol
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
SOLVED!!!!
Flashed H90120e_00_0316.kdz with LGUP instead of LG Flash Tool and it worked!!!!
Thank you so much
rubecker said:
SOLVED!!!!
Flashed H90120e_00_0316.kdz with LGUP instead of LG Flash Tool and it worked!!!!
Thank you so much
Click to expand...
Click to collapse
how can you get into downloader mode ? I get stuck on the boot screen, even when trying to access downloader mode. I don't have recovery installed as this happened while trying to install it.
rubecker said:
SOLVED!!!!
Flashed H90120e_00_0316.kdz with LGUP instead of LG Flash Tool and it worked!!!!
Thank you so much
Click to expand...
Click to collapse
could some one help me please?
i have the same problem on the h901 one, i'm triying to get into download mode and it shows the firts screen of DL mode but does not sucess it continue to lg screen triying to boot up and stocks in a boot loop.
elmanolette said:
could some one help me please?
i have the same problem on the h901 one, i'm triying to get into download mode and it shows the firts screen of DL mode but does not sucess it continue to lg screen triying to boot up and stocks in a boot loop.
Click to expand...
Click to collapse
Your phone needs to be connected to PC for that to work. Check if you connected directly to onboard USB port and cable is OK. Also, check if you going in it right: full shutdown (preferebly with battery), hold vol-up and connect it to PC while doing it. It should show small frame with "Download mod" and some dots and go to actual download mode after it detectes connection to PC.
Hawk84r said:
Your phone needs to be connected to PC for that to work. Check if you connected directly to onboard USB port and cable is OK. Also, check if you going in it right: full shutdown (preferebly with battery), hold vol-up and connect it to PC while doing it. It should show small frame with "Download mod" and some dots and go to actual download mode after it detectes connection to PC.
Click to expand...
Click to collapse
I've doing exactly that steps, but i did not do this (Check if you connected directly to onboard USB port and cable is OK). The pc just found it in fastboot mode, i tryied to get it into download mode but not sucess, it attemp go in there but just shows the "small frame with "Download mod" and some dots" and reboots to lg screen and restart over and over
elmanolette said:
I've doing exactly that steps, but i did not do this (Check if you connected directly to onboard USB port and cable is OK). The pc just found it in fastboot mode, i tryied to get it into download mode but not sucess, it attemp go in there but just shows the "small frame with "Download mod" and some dots" and reboots to lg screen and restart over and over
Click to expand...
Click to collapse
Also, you can try holding vol-up again, after download mode screen appeared. What kind of bootloop you area having, by the way? Is it just LG logo or something is writen in red there?
Hawk84r said:
Also, you can try holding vol-up again, after download mode screen appeared. What kind of bootloop you area having, by the way? Is it just LG logo or something is writen in red there?
Click to expand...
Click to collapse
yes, i tryied holding vol-up again, after download mode screen appeared and when i let it continue to normal boot there is something in red color after the Lg logo appears (690 boot varification fail!)
(740 -cause: MISMATCH_SIG_LEN)
Is there a way for taking away?
elmanolette said:
yes, i tryied holding vol-up again, after download mode screen appeared and when i let it continue to normal boot there is something in red color after the Lg logo appears (690 boot varification fail!)
(740 -cause: MISMATCH_SIG_LEN)
Is there a way for taking away?
Click to expand...
Click to collapse
Well, i had exactly the same issue, after relocking bootloader (don't ask ) and download mode did it for me, had no trouble getting in. So - no much help from me at this point, i'm afraid =(
rubecker said:
SOLVED!!!!
Flashed H90120e_00_0316.kdz with LGUP instead of LG Flash Tool and it worked!!!!
Thank you so much
Click to expand...
Click to collapse
how could went into download mode? mine does not let get in there, just shows a piece of frame with download mode and some dots continue forward to loops and shows that too: boot varication fail .... cause mismatch_sig_len
elmanolette said:
how could went into download mode? mine does not let get in there, just shows a piece of frame with download mode and some dots continue forward to loops and shows that too: boot varication fail .... cause mismatch_sig_len
Click to expand...
Click to collapse
Did you ever get a solution to this issue? I know its been ages but i am in exactly the same situation.
hiroprotagonist said:
Did you ever get a solution to this issue? I know its been ages but i am in exactly the same situation.
Click to expand...
Click to collapse
Did you figure this out? I have the same issue.
AlphaDawg74 said:
Did you figure this out? I have the same issue.
Click to expand...
Click to collapse
Sadly i never did
Sorry
My Mi A3 was hard bricked and unbricked it using Mi flash tool , again after a few months in got bricked , I unbricked it again but this time I guess I somehow locked the bootloader , Now my device is bricked again , it's not responding not even charging , I set it in edl mode and tried to flash rom using mi flash tool , but this time the mi flash tool is showing me error "write time out , device may be disconnected"
Have you googled the error message "write time out , device may be disconnected"? There are a few suggestions.
bjlabuk said:
Have you googled the error message "write time out , device may be disconnected"? There are a few suggestions.
Click to expand...
Click to collapse
Yes mate , i tried everything searching on Google , can you please help me mate
I haven't experienced your problem. Could the message relate to the EDL connection? I found this link https://www.droidwin.com/unbrick-xiaomi-fix-device-stuck-in-edl-mode-via-qfil-tool/
So (i) when you used Mi Flash Tool did you use 'clean all' or 'clean all and lock'? - that might explain the locked bootloader. (ii) Did you check in Device Manager as per the link I have given? (iii) have you tried the patched firehose file method, as per https://www.droidwin.com/unbrick-mi-a3-fastboot-commands/ ?
Can't suggest anything else other than a repair shop where someone with more experience might be able to sort it.
bjlabuk said:
I haven't experienced your problem. Could the message relate to the EDL connection? I found this link https://www.droidwin.com/unbrick-xiaomi-fix-device-stuck-in-edl-mode-via-qfil-tool/
So (i) when you used Mi Flash Tool did you use 'clean all' or 'clean all and lock'? - that might explain the locked bootloader. (ii) Did you check in Device Manager as per the link I have given? (iii) have you tried the patched firehose file method, as per https://www.droidwin.com/unbrick-mi-a3-fastboot-commands/ ?
Can't suggest anything else other than a repair shop where someone with more experience might be able to sort it.
Click to expand...
Click to collapse
Thanks mate for your assistance , i guess last time i flash the device i mistakenly use " clean all and lock"
The device is in edl mode as the port is recognised in the device manager and yes i tried the patched firehose , got the same error "write time out may be device was disconnected"
Okay, how about trying to get out of EDL mode? https://www.droidwin.com/how-to-exit-edl-mode-in-android/ Can you do that?
If you can get out of EDL mode then try flashing the STOCK ROM using the platform-tools, not Mi Flash Tool! https://www.thecustomdroid.com/xiao...2a11363abaea7ed177f9037d4693fae#comment-33230
You will get the latest fastboot images here https://xiaomifirmwareupdater.com/miui/laurel/
bjlabuk said:
Okay, how about trying to get out of EDL mode? https://www.droidwin.com/how-to-exit-edl-mode-in-android/ Can you do that?
If you can get out of EDL mode then try flashing the STOCK ROM using the platform-tools, not Mi Flash Tool! https://www.thecustomdroid.com/xiao...2a11363abaea7ed177f9037d4693fae#comment-33230
You will get the latest fastboot images here https://xiaomifirmwareupdater.com/miui/laurel/
Click to expand...
Click to collapse
My Device is hardbrick so I guess doing it using platform tools won't work
Pyro556 said:
My Device is hardbrick so I guess doing it using platform tools won't work
Click to expand...
Click to collapse
Okay, if it is stuck in EDL mode the only think I can think of is to try using QFIL but you will need to search for the stock firmware for your device in 'Flat Build format' - see attached link and instructions https://www.droidwin.com/unbrick-xiaomi-fix-device-stuck-in-edl-mode-via-qfil-tool/
I have successfully unbricked a Wileyfox Swift 2 recently using the QFIL method.
I did try the qflash , it shows
download fail firehose fail fhloader fail process fail
Are you using QFIL from within QPST? https://forum.hovatek.com/thread-30141.html
Also download the Engineering ROM from here. It has the firehose file. https://mifirm.net/downloadfile/66
You're leaving it in edl too long. Hold down the power button for a full 30 seconds. Seriously, count. Now, hold vol up and down for the same. Attach the cable. Release volume buttons. Now, you are freshly in edl. It should work. If you go QFIL, you will need to do this in between each patch.
Check out this link on Sahara: https://www.droidwin.com/fix-sahara-fail-qsaharaserver-fail-process-fail-error-qfil-tool/
Also, you mind posting your patched programmer file? Been having trouble with that.
Eliliyah said:
Also, you mind posting your patched programmer file? Been having trouble with that.
Click to expand...
Click to collapse
Who are you asking? Not sure which file you are referring to?
bjlabuk said:
Are you using QFIL from within QPST? https://forum.hovatek.com/thread-30141.html
Also download the Engineering ROM from here. It has the firehose file. https://mifirm.net/downloadfile/66
Click to expand...
Click to collapse
i will try using this rom let's see
After installing some roms I decided to flash the stock rom using Mi flash tool, but the flash tool gave many errors, I tried many times to flash it, and then I decided to reboot the phone in fastboot mode to see if that solved something, but from that moment the phone did not turn on again, and it did not enter fastboot or recovery mode.
After a moment I connected the phone to the pc and saw that a device appeared "Qualcomm HS-USB QDLoader 9008".
Then I looked for solutions on the internet and when I tried some of those solutions, I realized that the flash tool sometimes when I clicked the "flash" button did nothing, when you clicked it again it showed errors, but if you clicked the "flash" button and then the "refresh" button the flashing progress appeared, so I thought that's why my redmi note 10 was hard bricked, because I closed many times the flash tool when it was flashing.
I thank you in advance for any help. Any idea how to fix it?
ajanco said:
After installing some roms I decided to flash the stock rom using Mi flash tool, but the flash tool gave many errors, I tried many times to flash it, and then I decided to reboot the phone in fastboot mode to see if that solved something, but from that moment the phone did not turn on again, and it did not enter fastboot or recovery mode.
After a moment I connected the phone to the pc and saw that a device appeared "Qualcomm HS-USB QDLoader 9008".
Then I looked for solutions on the internet and when I tried some of those solutions, I realized that the flash tool sometimes when I clicked the "flash" button did nothing, when you clicked it again it showed errors, but if you clicked the "flash" button and then the "refresh" button the flashing progress appeared, so I thought that's why my redmi note 10 was hard bricked, because I closed many times the flash tool when it was flashing.
I thank you in advance for any help. Any idea how to fix it?
Click to expand...
Click to collapse
have to get someone with authorized account to fix it using edl flash tool, from next time dont use miflash and just extreact the rom zip and flash it with the bat file.
ajanco said:
After installing some roms I decided to flash the stock rom using Mi flash tool, but the flash tool gave many errors, I tried many times to flash it, and then I decided to reboot the phone in fastboot mode to see if that solved something, but from that moment the phone did not turn on again, and it did not enter fastboot or recovery mode.
After a moment I connected the phone to the pc and saw that a device appeared "Qualcomm HS-USB QDLoader 9008".
Then I looked for solutions on the internet and when I tried some of those solutions, I realized that the flash tool sometimes when I clicked the "flash" button did nothing, when you clicked it again it showed errors, but if you clicked the "flash" button and then the "refresh" button the flashing progress appeared, so I thought that's why my redmi note 10 was hard bricked, because I closed many times the flash tool when it was flashing.
I thank you in advance for any help. Any idea how to fix it?
Click to expand...
Click to collapse
hey
I brought mi phone for my aunt and she is facing similar issues too. If you find any solutions do let me know.
ScarletSkies1234 said:
have to get someone with authorized account to fix it using edl flash tool, from next time dont use miflash and just extreact the rom zip and flash it with the bat file.
Click to expand...
Click to collapse
Yes, today, I have been looking for solutions and I see that paying someone with authorized account is the only way to get my phone back. :C ....I didn't know you could flash without the Mi flash tool, thanks, I will try in the future....
msgranger12 said:
hey
I brought mi phone for my aunt and she is facing similar issues too. If you find any solutions do let me know.
Click to expand...
Click to collapse
Hi, I told you that I fixed my phone with the "Xiaomi Pro Tool" (it's paid but cheap). Good luck!
ajanco said:
Yes, today, I have been looking for solutions and I see that paying someone with authorized account is the only way to get my phone back. :C ....I didn't know you could flash without the Mi flash tool, thanks, I will try in the future....
Click to expand...
Click to collapse
My friend tried to flash fastboot image using official android platform tools from google, build march 2022, it didn't work. Always failed when flashing the super partition. Fortunately, he decided to flash it with mi flash build 2020 (forgot which one), and it succeeded. I didn't believe it at first. Weird indeed. I believe xiaomi put something else to their fastboot binary in the mi flash.
ajanco said:
After installing some roms I decided to flash the stock rom using Mi flash tool, but the flash tool gave many errors, I tried many times to flash it, and then I decided to reboot the phone in fastboot mode to see if that solved something, but from that moment the phone did not turn on again, and it did not enter fastboot or recovery mode.
After a moment I connected the phone to the pc and saw that a device appeared "Qualcomm HS-USB QDLoader 9008".
Then I looked for solutions on the internet and when I tried some of those solutions, I realized that the flash tool sometimes when I clicked the "flash" button did nothing, when you clicked it again it showed errors, but if you clicked the "flash" button and then the "refresh" button the flashing progress appeared, so I thought that's why my redmi note 10 was hard bricked, because I closed many times the flash tool when it was flashing.
I thank you in advance for any help. Any idea how to fix it?
Click to expand...
Click to collapse
Xiaomi Flash tool support EDL flashing too...try this version....and also install the Qualcomm driver.