Hello, sorry for english... i have problem like i after 3 years i wanna back to my zenwatch 2 and after i do factory reset i cant pair with him any phone i tried 4 phones (all always after reset).
Trying to install old Android wear version 1.5.0.2951640 and try to pair with this version but still nothing...
After pair with phone its says connected but when cheking for updates in android wear on phone after like 20 seconds says its failed and i can re-pair this devices but always says failed.
Trying clear cache etc but in recovery mode slide down and up doesn't work. And i try to connect this watch to ZenFone 2 but still nothing.
ZenWatch
Android Wear 2.0.0.161057753
Android 7.1.1
Security update 1 June 2017
Compilation NWD1.170706.001
When i try to run System update says cannot run aplication.
After failed to update from phone stuck on search for update, after like 15 minutes says continue configuration on phone but i cant do anything.
Any Ideas guys ? Thanks for help
Resolved!! i have boot system from this thread
[DUMP] ZenWatch 2 (sparrow, WI501Q) Build M6E70C
Inspired by this thread! Dumped via non-flashed (only live booted) TWRP so I can dump the original recovery too. Can be flashed in fastboot mode! To flash these images reboot your watch, swipe from the top left to the bottom right corner when...
forum.xda-developers.com
and i pair with phone without any problems.
Related
Hello to all!
So I got the automatic message for available system upgrade for android 6.0.1. (5th time)
I have downloaded it, the phone reboot for instalation, started the instalation and half aminute
after,I got the "error" message with the android icon laying down on the floor:
I have the Android Lollipop 5.1.1.
What is the problem?
Could it be one of the apps installed?
What can you advise me to do next?
I have factory reset before and after attempts.
Thanks alot!.
PreciousDee
Hi guys please help me i need to have my phone working back |:.... today i updated my wiko fever 4g but i got an error... now when i boot it an android icon shows with "no command." text. Tryed with v.39 program on wiko website but its not working for me... when arrow becomes green download wont start.
I'm thinking to recover system fom sd card but i cannot find roms please help me |: thanks in advance
Same issue here... Finally decided to upgrade the system from stock firmware, and got "error" when it rebooted the phone. Then "no command".
Darknezz89 said:
Hi guys please help me i need to have my phone working back |:.... today i updated my wiko fever 4g but i got an error... now when i boot it an android icon shows with "no command." text. Tryed with v.39 program on wiko website but its not working for me... when arrow becomes green download wont start.
I'm thinking to recover system fom sd card but i cannot find roms please help me |: thanks in advance
Click to expand...
Click to collapse
I solved my issue by restoring Lollipop (v.39) with the tool from the wiko website and then performing the update again; the phone started again (at v.41) and I was able to download Marshmallow from the next system update.
Issue was probably caused by some configuration or application.
Still slowly downloading Marshmallow now, so cannot say anything about the next update, but I guess that will go well, since the phone is reset now.
Just to follow up: Marshmallow is working fine on my Wiko Fever, much better than Lollipop. Amazing update.
Instructions for others after having read some comments from other people experiencing issues with the upgrade:
- BACKUP all your data before upgrading from Lollipop to Marshmallow, as if you would buy a new phone; I luckily did, as I wanted to set the microSD from removable to internal
- remove the microSD and (after having a backup of all your data as per step above) format the card as FAT32 on your PC; better to have a clean MicroSD card for after the upgrade I think
- reboot the phone in recovery mode and do a: wipe cache+reset to factory settings
- once the phone is reset and started, proceed with upgrading to Marshmallow
- don't know if needed after the upgrade to do an additional wipe cache+factory settings reset, doesn't harm to do it though
- be unhappy for the hours lost in restoring the phone data + apps + reconfigure everything
- be happy of the improved phone software
Questions upon questions.
So, i got the notification for the update last week, and i saved it until today to install it. The file downloaded was just 7 mb, i had enough battery for the intallation of the update (30% recomended by the software), something got messed up and an error message with the dead android character appeared. I know i lost all my things contacts and sd card... tried to hard reset the damn thing and nothing. I already googled the problem and i found nothing similar to what i get, i'm stuck in the recovery screen and the phone doenst shut down, every time i force it, it just boots back up after 15 30 seconds. I got to be honest i tought it was just another update but aparently its a "new" operating androind system. They could have told me with a update log or something...
Hello, I have a philips 55puk6400/12. This tv was already not working great from the start. And after the last firmware update it wont even start up. It has a bootloop or something.
Things I tried:
Installed the new software via android recovery
Tried to clear the cache from the android recovery
Tried to wipe user data from the tv. This one I managed to do once as the tv suddenly booted up.
But... this all didn’t work for me.
Does anyone have a solution or a older version of the software of this 2015 model?
Kind regards,
Arjan
Hello, I write from Italy, where I bought an Honor 9 in December 2017.
I never tampered with this phone: no root, nor flashing, nor whatever fancy trick, as in fact I'm not really exactly good with smartphones.
The night between the 20th and the 21st of April 2019, after being prompted by my phone to install the new EMUI 9 update [ STF-L09 9.0.1.162(C432E2R1P5) ], I accepted and let it install overnight (note that the update was downloaded, probably automatically, 1 or 2 days before, but I didn't accept the prompt to install it yet, because I needed my phone for a 15-hours long car trip, and so I figured I wouldn't risk it by installing the update just before my trip - LUCKILY apparently, because otherwise I would have had to stay with this eRecovery thing the whole day without a computer).
I woke up this morning (21st of April) to find it was on eRecovery, giving me the following choices:
(some message I don't remember, probably "Serious problems occurred when the device boot etc. etc.")
Download latest version and recovery
Wipe data/factory reset
Reboot
Shutdown
I did the "Download latest version and recovery" option at first: after clicking it, it searches for WiFi around, and after writing my router password and connecting it to my router, it downloaded the 3941 MB (if I recall correctly) update; however, I left my phone downloading only to find it like this (I was away while it was downloading because I have a bit of a slow internet, so I don't exactly know what happens after it finishes downloading):
(some message I don't remember, probably "Serious problems occurred when the device boot etc. etc.")
Wipe data/factory reset
Shutdown
So I did "Shutdown" and I restarted the phone shortly after, and it restarted itself twice (one was my restart, but after that it restarted itself automatically), then always finishing on the eRecovery with 4 options like I wrote before. I did the "Download latest version and recovery" option again, and I had the same result.
What should I do? I really wish NOT to delete all my internal data, even because after reading some other threads I understood it might even be useless. Do you have any counsel?
Thanks in advance guys, I'm really going crazy and have no idea whatsoever about what to do, please help me!
P.S. I believe I found some other people with my same problem (or atleast similar) on the Huawei UK community site (I'm not allowed to post links yet as I just created this account).
The only way to recover this is download the update completely with pc in install to memory in dload folder after it finishes then boot to download mode and hopefully should work again it sounds like you have faulty update hope this helps
Try to update with HiSuite, if it doesn't work just grab your files with HiSuite and update using dload. If it still doesn't work, warranty claim.
Hello,
I installed Asteroid OS yesterday, but Bluetooth was not working, so I turned it off. The problem is, that when I tried to flash the Zenwatch 2 stock system files it did not work.
Now, the watch is flashing, and stuck in the bootloader.