I can not find threads at xda about Lenovo Legion Y90, so I created this thread.
Does anyone here have chinese lenovo account to download this ROM and root files and upload it for download?
拯救者Y90 降级系统及线刷/解BL锁 ROOT 保留root升级教程_拯救者电竞手机系列-联想社区
拯救者Y70 降级系统及线刷/解BL锁 ROOT 保留root升级教程_拯救者电竞手机系列-联想社区
Problem already solved
هIs there a global ROM available at this time?
sandstranger said:
تم حل المشكلة بالفعل
Click to expand...
Click to collapse
مHello, can you provide a solution to the problem, the root of the modified ROM
sheikbadr said:
مHello, can you provide a solution to the problem, the root of the modified ROM
Click to expand...
Click to collapse
https://doc.weixin.qq.com/doc/w3_Af0Alwb2ADI1SPrVvXuRMSe1k7YCa?scode=AOoATwelAA81ct055JAf0Alwb2ADI. (translate page) this is for rooting
https://doc.weixin.qq.com/doc/w3_Af0Alwb2ADIf1c8AEgvSQKFdc0JIx?scode=AOoATwelAA8M2GMdFmAf0Alwb2ADI. ( This is for flashing rom or downgrading).
Note oem unlock must be enabled in developer mode, then unlock bootloader in fastboot mode before rooting. There are many command for unlocking bootloader I used fastboot oem unlock. first enter fastboot ( adb reboot-bootloader or use the side key combination) to enter fastboot mode. Then adb fastboot devices ( to make sure my device is recognized first) note use the side port for adb or fastboot mode for y90. Then fastboot oem unlock. If pass. Check to verify by typing. Fastboot getvar unlocked . If unlocked status yes. Then restart and install magisk, patch your latest rom boot.img in magisk or recovery.img, depending on magisk ram disk yes or no, if yes then patch boot.img if no then recovery.img, getting recovery.img is another step altogether, search for the method online. Copy the patched file to your adb fastboot tool. go back to fastboot mode. Fast boot devices to make sure ur device is recognized and flash the patched boot.img, by typing fastboot flash boot ( the magisk_patched.img file which you patched) then execute. Restart.
For clear understanding, fully comprehend adb fastboot tool, and how to open the terminal, bootloader unlock command as I mentioned before there are many fastboot command to unlock bootloader and fully refer to the link above for guidance. I just did a summary of the whole process. Thanks
sandstranger said:
I can not find threads at xda about Lenovo Legion Y90, so I created this thread.
Does anyone here have chinese lenovo account to download this ROM and root files and upload it for download?
拯救者Y90 降级系统及线刷/解BL锁 ROOT 保留root升级教程_拯救者电竞手机系列-联想社区
拯救者Y70 降级系统及线刷/解BL锁 ROOT 保留root升级教程_拯救者电竞手机系列-联想社区
Click to expand...
Click to collapse
Im from australia and each time i try to register in wechat i never receive the verification code to my mobile number. Is wechat only working for china? Im stuck, dont know why i cant get the verification codes.
turbo30001 said:
Im from australia and each time i try to register in wechat i never receive the verification code to my mobile number. Is wechat only working for china? Im stuck, dont know why i cant get the verification codes.
Click to expand...
Click to collapse
Actually I just got in. Not a very user friendly system but achieved access.
Does anyone have the firmware to root? I cannot get into WeChat or would someone be willing to verify my number so I'm able to do so?
turbo30001 said:
Actually I just got in. Not a very user friendly system but achieved access.
Click to expand...
Click to collapse
How were you able to get in?
Send them an email & they will register the mobile number. They do respond. It takes a couple of weeks however, i tried on a different phone and got in earlier. Didn't do anything different but it worked. Persistance.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For any boot image file contact me for download. For a special reason I can't upload all here. I have to be authorized on the WeChat page for each rom boot.img to be downloaded.
WhatsApp = +8613125204154
eugenenomania said:
For any boot image file contact me for download. For a special reason I can't upload all here. I have to be authorized on the WeChat page for each rom boot.img to be downloaded.
WhatsApp = +8613125204154
Click to expand...
Click to collapse
If I could have a copy of the 14.0.120 firmware I would appreciate it... Been trying for months to get notifications to work properly but never seems to obviously due to the CN firmware.
eugenenomania said:
For any boot image file contact me for download. For a special reason I can't upload all here. I have to be authorized on the WeChat page for each rom boot.img to be downloaded.
WhatsApp = +8613125204154
Click to expand...
Click to collapse
Can you download the latest ZUI 14 (.qpst firmware package) for L70081? Would be the least you could do considering this thread is on this devices forum (Duel 2 / Pro 2)
JPS3269 said:
If I could have a copy of the 14.0.120 firmware I would appreciate it... Been trying for months to get notifications to work properly but never seems to obviously due to the CN firm
Click to expand...
Click to collapse
project_2501 said:
Can you download the latest ZUI 14 (.qpst firmware package) for L70081? Would be the least you could do considering this thread is on this devices forum (Duel 2 / Pro 2)
Click to expand...
Click to collapse
Alright, I will give you a reply soon along with the firmware
project_2501 said:
Can you download the latest ZUI 14 (.qpst firmware package) for L70081? Would be the least you could do considering this thread is on this devices forum (Duel 2 / Pro 2)
Click to expand...
Click to collapse
I will check for it today, am mainly on l71061. But let me check the WeChat for the l70081 platform
eugenenomania said:
I will check for it today, am mainly on l71061. But let me check the WeChat for the l70081 platform
Click to expand...
Click to collapse
They have these, you can't get an official update yet?
No, they restricted the ZUI 14 (android 13) update to mainland China. It's been very difficult to track down. Someone within that weChat group has it, and it should be 14.0.222 or a few digits below for the full .qpst firmware package. Please ask someone there if you can, would really like to have the current platform available.
eugenenomania said:
Alright, I will give you a reply soon along with the firmware
Click to expand...
Click to collapse
Thank you much apreciated
eugenenomania said:
I will check for it today, am mainly on l71061. But let me check the WeChat for the l70081 platform
Click to expand...
Click to collapse
They have these, you can't an official update yet
project_2501 said:
No, they restricted the ZUI 14 (android 13) update to mainland China. It's been very difficult to track down. Someone within that weChat group has it, and it should be 14.0.222 or a few digits below for the full .qpst firmware package. Please ask someone there if you can, would really like to have the current platform available.
Click to expand...
Click to collapse
Okay I will look for someone
Related
Nexus 5 Multi-Tool
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
me and kwongger are putting together a new tool, its one of the first that supports windows/linux/mac AND ANDROID! thats right, the tool can be used on your device!
FEATURES
Unlock bootloader
Install CWM
Install TWRP
Add root permissions
Add build.prop tweaks
Backup device
Flash a custom recovery
Flash a custom kernel
Revert device to stock out-of-box state
Pull device information
Install drivers
Find custom kernels, recoveries and roms
Click to expand...
Click to collapse
Due to my cousin having this device(not me) i would appreciate someone to help me with testing new features?
DOWNLOAD LINK
INSTRUCTIONS ARE SIMPLE
All activities take place with the device on and you will endup back with the device on.
Download
Extract
Run Tool.exe as administrator
Install device drivers(included)
Click to expand...
Click to collapse
FAQ
Q. After trying to revert to stock state(out of the box) my device is stuck in a bootloop?
A. Boot into recovery, wipe data/factory reset. Your prayers have beey answered
Q. After the tool flashes recovery, it doesnt seem to stick. why?
A. This is not an error with the tool or recovery, its just.. a nexus thing...
Flash it a few more times and eventually it will stick!
Q. Why is the file only 1.5 MB?
A. All files are stored on server and pulled only when needed with a utility
Q. Will the tool download all the files everytime i wanna perform an option?
A. No. it downloads the file once and detects that its already there the second time.
Q. Is this tool worth my time?
A. Who would think a 10 minute toolkit could hit the portal?
Q. Are the drivers included?
A. Yes but no. the application downloads the drivers only if you want to install them via my tool
Q. Who's yo daddy?
A. Idk, son.
Click to expand...
Click to collapse
CHANGELOG
3.0
Added CWM
Updated TWRP
Added "Where to find custom..." in flash options
2.4
Fixed menu error
Changed file type to executable
Added logo
Added root options menu
Changed root method
All processes are now verbal
No wait-for-device command
2.0
All files stored on server
Cut the tool size down to 1.5 MB
Added restore to stock state
Added install drivers+guide
Added get device info
Fixed minor error
1.0
Initial release
Click to expand...
Click to collapse
Credits
Chainfire
PlayfulGod
Cwm
Twrp
Click to expand...
Click to collapse
NOTE: what you do with this tool is your responsibility, use it at you own risk.
Hello,
Good work!
Published on HTCMania :good:
http://www.htcmania.com/showthread.php?t=711894
David_Vaz said:
Hello,
Good work!
Published on HTCMania :good:
http://www.htcmania.com/showthread.php?t=711894
Click to expand...
Click to collapse
Thanks
You show it as note 3 multi tool, need to change that
jd1639 said:
You show it as note 3 multi tool, need to change that
Click to expand...
Click to collapse
whopps will fix that now
Used the tool - now phone will not restart. It is stuck on the four colours that move about. Has been stuck on this now for about 5 minutes.
Any suggestions? I am able to get into twrp recovery no problems.
Ian
irhut said:
Used the tool - now phone will not restart. It is stuck on the four colours that move about. Has been stuck on this now for about 5 minutes.
Any suggestions? I am able to get into twrp recovery no problems.
Ian
Click to expand...
Click to collapse
You will have to Restore your phone.
My kit will have recovery functions monday.
http://forum.xda-developers.com/showthread.php?t=2508817
irhut said:
Used the tool - now phone will not restart. It is stuck on the four colours that move about. Has been stuck on this now for about 5 minutes.
Any suggestions? I am able to get into twrp recovery no problems.
Ild.pro
Ian
Click to expand...
Click to collapse
what function did you use?
Kwongger said:
You will have to Restore your phone.
My kit will have recovery functions monday.
http://forum.xda-developers.com/showthread.php?t=2508817
Click to expand...
Click to collapse
Also no he doesnt, the only thing that could cause this is the build.prop tweaks, whitch can be reverted by pushing the backup back to /system/ Aldo mine will Also include restore options soon
What tweaks are in this?
Sent from my Nexus 4 using Tapatalk
crackmulah said:
What tweaks are in this?
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Battery saving deepsleep quickbook scrolling enhancement better touch responde better jpeg quality better picture quality better internet and connection speed, googles sms Server and overall smootheness
Does this tool install the official TWRP release for the N5?
ricky310711 said:
Battery saving deepsleep quickbook scrolling enhancement better touch responde better jpeg quality better picture quality better internet and connection speed, googles sms Server and overall smootheness
Click to expand...
Click to collapse
That's quite something to say, better all these things for a new device and software.
Sent from my Nexus 4 using xda app-developers app
Synyster06Gates said:
Does this tool install the official TWRP release for the N5?
Click to expand...
Click to collapse
Yes!
also people reading the article on the portal, the tool does not use fast flash commands, it uses the dd method for those flashes, when i add kernel flashing and backing up your device as .img files then i will be adding fastboot flash commands, so yes, the flashes occur when your device is booted!
Can I ask what version of TWRP is installed, is it the latest?
ItzMar said:
Can I ask what version of TWRP is installed, is it the latest?
Click to expand...
Click to collapse
there is only one version of TWRP compiled for the N5 and yes its the latest! update coming soon!
Ok thanks man. Can I also ask where to find the device drivers?
ItzMar said:
Ok thanks man. Can I also ask where to find the device drivers?
Click to expand...
Click to collapse
i am almost finished updating the tool i will include it in the next update!! but you could more then likely find them in the general section!
ok cheers, no problem. Will wait for the new version to be up, no rush. Thanks for your commitment to provide a tool for us noobs/lazy people!
Would you recommend running your tool before first boot?
Just a few questions: when there is <waiting for device> for 5 minutes, that seems like my drivers are wrong? It was possible to unlock, but not to install a recovery, so i am trying to update my drivers...
And can i run the tool and select unlock, install recovery and root even when my device is already unlocked?
This project has been incorporated into another larger and multi-device: TOOL ALL IN ONE
I decided to create a fast and secure program to simplify modding on these watches. At this moment only the Amazfit Pace si supported, when there are more guide on Amazfit Stratos i will upgrade this tool. Remember to unlock your amazfit bootloader you always need of unlock code from https://unlockamazfit.com/
Huami AMAZFIT Tool
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FUNCTIONS
Install Drivers;
Unlock Bootloader;
Install APKs;
Uninstall APKs;
Reboot Device;
Update the Tool to latest version;
Enable App List;
Set english as default language (Not available for Stratos);
Take screenshoots;
HOW TO INSTALL
Download .zip file;
Right click on zip and go in file properties;
Set "Unblock", then click on "Apply" and "OK" (If you don't see it continue the installation guide). Guide picture:
Extract all its contents into a folder;
Click on setup.exe;
Click on "Install";
Waiting for the end of the process;
Enjoy your tool
UPDATE
There will be no need to re-download the new tool, but just look for new updates directly from the tool.
In all cases I'll update the link in this thread and report it when there are new updates with its changelog. (If you have some problem during the update, press continue)
CHANGELOG
#1.0.1.1
Little fix in the new function "Flash Stock ROM".
#1.0.1.0
Added a new function "Flash Stock ROM", it will install a stock ROM on you smartwatch;
General Bugfix and Improvements.
#1.0.0.8
Solved a bug in the unlock bootloader option, now it works perfectly;
Added automatic check device when one device will be plugged in pc;
General BugFix and Improvements.
#1.0.0.7
Fixed English language setter, now it works perfectly;
Added version number in "Other Info";
Little Fix in APK Uninstaller.
#1.0.0.6
Fixed a little in bug in the screenshot file manager;
#1.0.0.5
Blocked "Set English Language" for Stratos;
General Bugfix and Improvements;
#1.0.0.4
Added AMAZFIT Stratos to official support;
Added new option to install Drivers;
New Screenshots functions: now you can take a screenshot and import it on your pc;
Added Other Info, here you can open this XDA thread, you can delete the downloaded Drivers and you can send me a mail;
Fixed Check Data options, now will check good data also for english version;
General Bugfix and Improvements.
#1.0.0.3
Fixed support model name (Added to auto recognizer "Amazfit Pace");
Fixed some buttons;
General BugFix and Improvements.
#1.0.0.2
Initial Release
CONTACTS
If you think it necessary to add new features please comments or send me a private message or send me an email to [email protected]. Please contact me if you see a bug
DOWNLOAD
Huami AMAZFIT Tool
( Alternative Link )
( Another Alternative Link )
Stock ROMs
DONATE LINK
If you want to support the project please consider making a donation, thanks.
Will test it, thanks.
Do I have to enable app list to be able to install .apk's?
R-iel said:
Will test it, thanks.
Do I have to enable app list to be able to install .apk's?
Click to expand...
Click to collapse
It's not necessary, but if you install an apk you need of app list to open it on your amazfit
maybe consider creating an English installer?
edit:
and maybe a driver installation option ?
1immortal said:
maybe consider creating an English installer?
edit:
and maybe a driver installation option ?
Click to expand...
Click to collapse
In the next update you will see it:good:
Congratulation!
With this tool can I install watch droid?
Thanks
arp said:
Congratulation!
With this tool can I install watch droid?
Thanks
Click to expand...
Click to collapse
Download the apk you want to install and then you can install it through the APK Installer option in this tool
Big Thanks!
Can i re-lock bootloader ?
Thanks
boumboum said:
Big Thanks!
Can i re-lock bootloader ?
Thanks
Click to expand...
Click to collapse
At this moment i have not found a lock command that works, when i find it i will add an option to lock bootloader in the tool
I found your utility and now I want to use it to unlock my amazfit pace.
But when going to fastboot mode the watch gets into fastboot mode and windows tries to install a fastboot device (this does not get installed) and then your utility hangs.
I do have fastboot and adb installed , but adb = v1.0.32 and I do not how to find the version of fastboot.
When using fastboot on the commandline I can use it to reboot my phone when it is in fastboot mode. When I want to reboot the watch in fastboot mode the command also hangs.
So I guess this has something to do with versions of adb and/or fastboot.
Do I need a lower version because the watch runs on android 5.1?
If yes, what version do I need and how to uninstall the currents version of these tools.
Can anybody help me out?
deboopi2 said:
I found your utility and now I want to use it to unlock my amazfit pace.
But when going to fastboot mode the watch gets into fastboot mode and windows tries to install a fastboot device (this does not get installed) and then your utility hangs.
I do have fastboot and adb installed , but adb = v1.0.32 and I do not how to find the version of fastboot.
When using fastboot on the commandline I can use it to reboot my phone when it is in fastboot mode. When I want to reboot the watch in fastboot mode the command also hangs.
So I guess this has something to do with versions of adb and/or fastboot.
Do I need a lower version because the watch runs on android 5.1?
If yes, what version do I need and how to uninstall the currents version of these tools.
Can anybody help me out?
Click to expand...
Click to collapse
Have you tried to install drivers through the tool?
Yes, but it did not help.
I started all over on another pc and now I can continue.
Thanks
rom installation
Hi Mauro,
another great job, I love this kind of tools (I am already a user of your Toolkit for Oneplus 5 with satisfaction), regarding the amazfit pace I have unlocked the bootloader, I would like to ask you if is it possible install a rom with the tool.
Thanks
neolamp79 said:
Hi Mauro,
another great job, I love this kind of tools (I am already a user of your Toolkit for Oneplus 5 with satisfaction), regarding the amazfit pace I have unlocked the bootloader, I would like to ask you if is it possible install a rom with the tool.
Thanks
Click to expand...
Click to collapse
Thanks, at this moment you can't install a rom with a this tool, in the next update i think i will add a function to auto install the 2 stock rom for amazfit pace
Great..
Can i install apks without unlock bootloader?
Thanks..
dauzsalam said:
Can i install apks without unlock bootloader?
Thanks..
Click to expand...
Click to collapse
Yes you can.
Sent from my HTC 10 using Tapatalk
dauzsalam said:
Can i install apks without unlock bootloader?
Thanks..
Click to expand...
Click to collapse
Yes, you can
HELP!
Hello!
When I use your tool, and try to unlock the bootloader, I get this message:
Your phone is not properly relevated, please check if it is in fastboot
mode
Being a newbie, I am stuck here.
Please advice..
Regards
podgaard said:
Hello!
When I use your tool, and try to unlock the bootloader, I get this message:
Your phone is not properly relevated, please check if it is in fastboot
mode
Being a newbie, I am stuck here.
Please advice..
Regards
Click to expand...
Click to collapse
Have you installed drivers before try to unlock bootloader?
mauronofrio said:
Have you installed drivers before try to unlock bootloader?
Click to expand...
Click to collapse
Yes, I installed them from the app., and the watch is showing Fastboot on screen!.
As you may know, at the time of writing it's not possible to unlock the bootloader of the European model. Fortunately there's a workaround. To know how it works, scroll to the end of the post.
First of all, this is only for the European RMX3301, but you can try on any other global model that doesn't allow the unlocking of the bootloader. I'm not talking about temporary errors, but of the infamous This phone model does not support deep testing error message.
Before starting I would like to thank polygraphene for their implementation of the Dirty Pipe vulnerability on Android. Without that, this would not have been possible.
Requirements:
The phone with a decent charge. Do not attempt this procedure with the phone at 10% and then cry if something goes wrong
A compatible build, read below
A Windows or Linux PC with adb and fastboot drivers installed
Check if your build is compatible:
Go to Settings -> About device -> Version and check Build number:
If your build is between RMX3301_11_A.14 and RMX3301_11_A.21, go to the procedure below
If your build is lower than RMX3301_11_A.14, or higher than RMX3301_11_A.21, install this OTA package to downgrade (or upgrade) to RMX3301_11_A.14
Procedure:
Make sure under Developer options you have OEM unlocking and USB debugging enabled
Download and extract the attached gt2pro_eu_unlock_dirtypipe_v0.2.zip file
Open a terminal in the folder of the extracted files
Connect the phone to the PC and select the File transfer option
Run the script:
On Windows, type run.bat and press enter
On Linux, type ./run.sh and press enter
Now the phone is temporarily rooted and the phone model is changed to RMX3301. Do not reboot or you will lose this status.
At this point you can follow the procedure on the official forum to unlock the bootloader of the global model. If you already have the Deeptesting app installed, clear its data to make sure it will update.
Changelog:v0.2:
Show more info about device for better debug
Show the model at the end to check if it worked
For technical people: how does it work?The script abuses a vulnerability of the Linux kernel called Dirty Pipe (or CVE-2022-0847). For further details, you can visit the official website. This allows us to gain temporary root and overwrite the ro.product.name property, the only one checked by the Deeptesting app. The vulnerability is present in Android and it has been fixed, at least for the Pixel 6, in the May 2022 security update. On the GT 2 Pro, the vulnerability has been fixed with the Android 13 update, while the latest Android 12 build (RMX3301_11_A.21) is still vulnerable. I have tested the procedure personally up to build RMX3301_11_A.16. If you're on a newer build and it doesn't work, please report it in the comments.
Will it work on device X?If the following conditions are met:
it is a Realme device;
the kernel version is 5.10.66;
there's a global model with a different ro.product.name that can be unlocked;
then you can edit the startup-root file and replace RMX3301 (near the end) with the ro.product.name of the global model and try if it works. If it doesn't, it could be for a lot of reasons. Unfortunately, I can't help you without physically having the device in hand.
If you have further questions about the procedure, please post them below.
woowww... thanks for you aport
I wonder if we can use this temporary root to do some modifications on system.
criszz said:
I wonder if we can use this temporary root to do some modifications on system.
criszz said:
I wonder if we can use this temporary root to do some modifications on system.
Click to expand...
Click to collapse
Excellent question... for example try modific the build regist
Click to expand...
Click to collapse
Rapper_skull said:
As you may know, at the time of writing it's not possible to unlock the bootloader of the European model. Fortunately there's a workaround. To know how it works, scroll to the end of the post.
First of all, this is only for the European RMX3301, but you can try on any other global model that doesn't allow the unlocking of the bootloader. I'm not talking about temporary errors, but of the infamous This phone model does not support deep testing error message.
Before starting I would like to thankpolygraphene for their implementation of the Dirty Pipe vulnerability on Android. Without that, this would not have been possible.
Requirements:
The phone with a decent charge. Do not attempt this procedure with the phone at 10% and then cry if something goes wrong
A compatible build, read below
A Windows or Linux PC with adb and fastboot drivers installed
Check if your build is compatible:
Go to Settings -> About device -> Version and check Build number:
If your build is RMX3301_11_A.14, RMX3301_11_A.15 or RMX3301_11_A.16, go to the procedure below
If your build is lower than RMX3301_11_A.14, or higher than RMX3301_11_A.16, install this OTA package to downgrade (or upgrade) to RMX3301_11_A.14
Procedure:
Make sure under Developer options you have OEM unlocking and USB debugging enabled
Download and extract the attached gt2pro_eu_unlock_dirtypipe.zip file
Open a terminal in the folder of the extracted files
Connect the phone to the PC and select the File transfer option
Run the script:
On Windows, type run.bat and press enter
On Linux, type ./run.sh and press enter
Now the phone is temporarily rooted and the phone model is changed to RMX3301. Do not reboot or you will lose this status.
At this point you can follow the procedure on the official forum to unlock the bootloader of the global model. If you already have the Deeptesting app installed, clear its data to make sure it will update.
For technical people: how does it work?
The script abuses a vulnerability of the Linux kernel called Dirty Pipe (or CVE-2022-0847). For further details, you can visit the official website. This allows us to gain temporary root and overwrite the ro.product.name property, the only one checked by the Deeptesting app. The vulnerability is present in Android and it has been fixed, at least for the Pixel 6, in the may 2022 security update. At the time of writing, the latest build for the GT2 Pro is RMX3301_11_A.16, and it's still vulnerable.
If you have further questions about the procedure, please post them below.
Click to expand...
Click to collapse
When you try the procedure... delete al date of phone? whe finish---- type run.bat and press enter ---- erase all?
criszz said:
I wonder if we can use this temporary root to do some modifications on system.
Click to expand...
Click to collapse
Theoretically you can do everything you can do on a rooted phone (Magisk, but without modules and Zygisk). In practice I never got Magisk to work properly, so I just limited myself to change the property. My goal was to unlock the bootloader, so I did it and installed Magisk.
manu81cba said:
When you try the procedure... delete al date of phone? whe finish---- type run.bat and press enter ---- erase all?
Click to expand...
Click to collapse
My procedure will not delete any data, but after that you have to follow the official procedure to unlock the bootloader, and that will factory reset your phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have this error... why?
manu81cba said:
View attachment 5634133
I have this error... why?
Click to expand...
Click to collapse
Can you post the output of adb devices?
Rapper_skull said:
Can you post the output of adb devices?
Click to expand...
Click to collapse
You can explain? no understand.. what do you say?
manu81cba said:
You can explain? no understand.. what do you say?
Click to expand...
Click to collapse
In the terminal, where you are, type adb devices and press enter, then post the output.
Rapper_skull said:
In the terminal, where you are, type adb devices and press enter, then post the output.
Click to expand...
Click to collapse
manu81cba said:
View attachment 5634133
I have this error... why?
Click to expand...
Click to collapse
Yes i have same output on A.16 installed.
manu81cba said:
View attachment 5634153
Click to expand...
Click to collapse
I can see that you have two different versions of adb, one inside the platform-tools folder and one installed elsewhere. Please confirm that by running adb version inside platform-tools and then outside.
Rapper_skull said:
In the terminal, where you are, type adb devices and press enter, then post the output.
Click to expand...
Click to collapse
now put all file decripted to plataform adb... and this result... all ok?
manu81cba said:
now put all file decripted to plataform adb... and this result... all ok?
View attachment 5634159
Click to expand...
Click to collapse
Yes. To make sure, run adb getprop ro.product.name and confirm it's RMX3301.
manu81cba said:
now put all file decripted to plataform adb... and this result... all ok?
View attachment 5634159
Click to expand...
Click to collapse
Working now?
Is rooting temporary? i can modific build.pro? or this process is only for change the model propety?
manu81cba said:
Working now?
Is rooting temporary? i can modific build.pro? or this process is only for change the model propety?
Click to expand...
Click to collapse
No, you can't modify any files, since /system is read-only. Even if you manage to do it, you will brick your device since the bootloader is still locked. If you want to unlock your bootloader, follow the official guide I've linked.
Rapper_skull said:
Yes. To make sure, run adb getprop ro.product.name and confirm it's RMX3301.
Click to expand...
Click to collapse
manu81cba said:
View attachment 5634169
Click to expand...
Click to collapse
Sorry, adb shell getprop ro.product.name
Its taken me a while to figure out a way to bypass the FRP (Factory Reset Protection) Lock on my Huawei EVA-L09 and do so while not bricking my device or installing shady software/roms so if this helps I hope you leave me a like and comment how long its taken you before you found this guide.
Its completely free as I refuse to pay money which I hope you appreciate as every other guide wants you to pay to unlock a device so no matter what level of skills you are this should help you to gain access to you're Huawei EVA-L09 and other models (I've also used this method on a Huawei P Smart (FIG) but this should also work on all the devices listed in the table below)
DeviceModelBootloaderHuawei P8 Lite (2015)ALEKirin 620Huawei Y6IICAMKirin 620Honor 5C / 7 LiteNEMKirin 65x (A)Honor 7XBNDKirin 65x (A)Honor 9 LiteLLDKirin 65x (A)Huawei MediaPad T5AGS2Kirin 65x (A)Huawei Nova 2PICKirin 65x (A)Huawei P10 LiteWASKirin 65x (A)Huawei P20 Lite / Nova 3eANEKirin 65x (A)Huawei P8 Lite (2017)PRAKirin 65x (A)Huawei P9 LiteVNSKirin 65x (A)Huawei Y9 (2018)FLAKirin 65x (A)Huawei MediaPad M5 LiteBAH2Kirin 65x (B)Huawei Nova 2i / Mate 10 LiteRNEKirin 65x (B)Huawei P Smart 2018FIGKirin 65x (B)Honor 6 PlusPEKirin 925Huawei P8GRAKirin 935Honor 8 Pro / V9DUKKirin 950Honor 8FRDKirin 950Huawei P9 StandartEVAKirin 950Honor 9STFKirin 960Huawei Mate 9 ProLONKirin 960Huawei Mate 9MHAKirin 960Huawei MediaPad M5CMRKirin 960Huawei Nova 2sHWIKirin 960Huawei P10VTRKirin 960
First download and extract the Android SDK Platform-Tools package for windows from -> https://developer.android.com/studio/command-line/adb
Next download drivers from -> https://adb.clockworkmod.com/ and run .exe file
Next go to -> https://github.com/mashed-potatoes/PotatoNV and read through the entire page and follow the steps to install HiSuite, test point drivers and latest version of PotatoNV and find out where you're test point are on you're device and learn how to use the tool
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Open PotatoNV and click disable FBlock and choose you're bootloader (refer to list on GitHub Repo) in my case for the Huawei EVA-L09 it was the Kirin 950 and follow the repo instructions to ground you're test point while inserting you're USB, now the target device field should show you're device then click start! and If you've followed the steps correctly then congrats you've generated a new bootloader code and got the following display.
Click to expand...
Click to collapse
From the display write down the "New Unlock Code" + "Build number" for later
Click to expand...
Click to collapse
Now we need the firmware to flash
Go to -> http://huawei-firmware.com/phone-list/ to find you're compatible firmware
Click to expand...
Click to collapse
My build number was "EVA-L09C02B363" so on the site I searched for that build number but found nothing so I removed 1 character from the end "EVA-L09C02B36" and found 2 results for "Huawei P9 EVA-L09C02B361 Firmware"
If you cant find a result keep removing 1 character from the end of you're build number until you can find the closet build to yours and Download it
Boot phone into fastboot mode
In the Android SDK Platform-Tools package folder hold In "CTRL + Shift" and Right click in the folder and click the option "open PowerShell window here"
In PowerShell type the following command "./fastboot oem unlock YOUR_CODE_HERE"
Press the volume key to select unlock bootloader on you're phone and press the power button (Now you've unlocked you're bootloader)
Download the firmware and extract the files and move the entire Dload folder to an SDcard (rename the SDcard SDcard) and insert it into you're device
Now boot the phone with both volume buttons pressed down and power button and let it install the new firmware
Click to expand...
Click to collapse
I personally had an error at 99% of install doing it this way so I had to manually flash each partition if you have the same issue then follow the steps
Download the tool Huaweiupdateextract tool -> https://www.leakite.com/flash-huawei-ota-update-without-sdcard/
Click to expand...
Click to collapse
And click "click", now browse for the update.app file inside the Dload folder and right click on the files and click extract all and save them into the Android SDK Platform-Tools package folder you extracted earlier
Boot phone into fastboot mode
Click to expand...
Click to collapse
Now you need to manually flash every .img file you extracted to the corresponding partition, all the .img files are saved in CAPSLOCK and the corresponding partition you need to flash to is the file name in all lowercase minus the .img part so for example the file RECOVERY.img needs to be flashed to the recovery partition and USERDATA.img to userdata and so on
In the same Powershell Window from earlier type "./fastboot flash *partition" "PARTITION.img" and replace partition with every img you extracted, example for USERDATA.img: "./fastboot flash userdata USERDATA.img"
Some flash's may fail, just move on to the next
Then type "./fastboot reboot"
Click to expand...
Click to collapse
And now skip through everything and access you're phone, I then personally booted my phone into Erecovery and clicked Install firmware and recovery and signed into my wifi after downloading I opened my phone and inserted my sim card (in my case it was lyca mobile and after the phone accepts the sim you will be prompted to take the system update, I flashed build EVA-L09C02B361 to my device but now I can update to my original build number EVA-L09C02B363.
Hopefully if you followed everything correctly you've just bypassed FRP.
You're welcome as someone who dosent have a lot to spend on tech I really value this sort of information and hopefully this full guide can help even a beginner gain access to there bricked phone.
Let me know if this helps!
doesn't work on Huawei Y6II CAM-L21 ..
kalinx said:
doesn't work on Huawei Y6II CAM-L21 ..
Click to expand...
Click to collapse
Did you ground the test point while clicking start?
brokeboy said:
Did you ground the test point while clicking start?
Click to expand...
Click to collapse
yes, in many ways i try it but this doesn't work too
kalinx said:
yes, in many ways i try it but this doesn't work too
Click to expand...
Click to collapse
Can you run it without Fblock and then run again with it ticked?
Yes I was struggling with it yesterday all day, in many ways. Now I get off. I will buy Sony Xperia M4 aqua with very easy root, I get unlock code from Sony website. Damn you HUAWEI! :/
kalinx said:
Yes I was struggling with it yesterday all day, in many ways. Now I get off. I will buy Sony Xperia M4 aqua with very easy root, I get unlock code from Sony website. Damn you HUAWEI! :/
Click to expand...
Click to collapse
Can you explain every step you did before to get to that point, also what's wrong with you're device?
Can this process work on Honor 10 col l29? He has kirin 970. Thank you.
levis36 said:
Can this process work on Honor 10 col l29? He has kirin 970. Thank you.
Click to expand...
Click to collapse
If its not on the list then it isn't supported but I believe if you look through the repo maybe someone forked it or there might be an alternative... I typed in honor in the questions and found this but there could be more
I solved it by changing the motherboard. I bought a phone with a broken display, 4 €, I changed the card and it did not have a lock on the screen and I entered the settings, return to the factory settings and everything goes ok. The new motherboard has emui 10.0.0 4 / 64gb and the old one was emui 8.1 which I failed to unlock I don't know the specifications it had. I would have liked to unlock the other one can have 6 / 128g.
levis36 said:
I solved it by changing the motherboard. I bought a phone with a broken display, 4 €, I changed the card and it did not have a lock on the screen and I entered the settings, return to the factory settings and everything goes ok. The new motherboard has emui 10.0.0 4 / 64gb and the old one was emui 8.1 which I failed to unlock I don't know the specifications it had. I would have liked to unlock the other one can have 6 / 128g.
Click to expand...
Click to collapse
Well done, that's good way to get past it... What phone did you take the motherboard from? Did you not find any info on how to use the bootloader unlocker with you're Honor 10 COL-L29 (Kirin 970)?
I tried 3 methods and none of them worked, they were all restricted, I got to a point and I couldn't move on.
Hi, I have a mate 9 with FRP and Bootloader locked, and when I try to unlock bootloader via fastboot, I have a warning telling that FRP needs to be unlocked first. Do you have any suggestiong?
Well, I did it at last After I have done this here and got no FRP bypass, I continued to google because this is weird, being able to run ADB/Fastboot commands, but unable to remove damn FRP. I have found this tool and it worked:
Download Huawei FRP and ID remove Tool For PC
Download Huawei FRP and ID remove Tool For PC if you want to bypass FRP lock google account from Huawei/Honor mobile
huaweiflash.com
So I can now thank the author for this guide, although unclear in some parts, then it has led finally to success. I have spent a couple of hours yesterday trying that bypass from the device (each and every method to start Youtube/Chrome/Maps/Google vie Talkback is already blocked as of now). Then a couple of hours for this guide. I could have purchased me an open phone instead of cracking this one but I wanted to play with some Huawei without having to pay anything.
There were unclear point in the guide, I elaborate
- to start fastboot mode: keep Volume down pressed and connect USB cable.
- you don't need specifically powershell, command line works as well
- the reflash is done from 32GB FAT32 formatted card named SDCARD which contained the unpacked folder dload with firmware files (SDCARD:/dload/<files>)
---initial comment---
EVA-L09 here.
Well, the procedure as described does not remove FRP lock.
PotatoNV worked, oem unlock command went through as well, but... Fastboot screen shows "FRP Lock" in green before the "oem unlock" command run; after the command and subsequent lowlevel reset; and after reflash.
The device asks the Google account after boot the same way as before the unlock/reflash.
Maybe the cumbersome way how you reflashed the phone is instrumental to enable FRP bypass (I have found exactly the same software build and my phone updated normally to 100% from SD card).
I have a P9 EVA-L09 device that has FRP locked. i try this method without PC and its work for me
Hi Guys!
I bought Lenovo Tab m8 TB-8505X a few months ago and i see it's lagging and still on Android 10. I want to install custom rom but there is no TWRP for this device. Can anybody develop TWRP or help me finding TWRP. Thanks in advance
https://forum.xda-developers.com/t/lenovo-tab-m8.4049539/post-84209395
https://forum.xda-developers.com/t/lenovo-tab-m8.4049539/post-84320503
aIecxs said:
https://forum.xda-developers.com/t/lenovo-tab-m8.4049539/post-84209395
https://forum.xda-developers.com/t/lenovo-tab-m8.4049539/post-84320503
Click to expand...
Click to collapse
It's for TB-8505F (WIFI ONLY), mine is TB-8505X (WIFI+LTE). Will it still work?
you tell us
I am looking for a twrp recovery for the Lenovo tab m8 tb-8506f. CANT FIND ANY
aIecxs said:
you tell us
Click to expand...
Click to collapse
Flashed successfully but there is a problem. I don't see SYSTEM under wipe and can't install any image properly. Is there any fix?
copy-paste the adb output with mouse + enter key, put in [code]tags[/code] here.
while in TWRP
Code:
adb shell
# cat /etc/fstab
# ls -l $(find /dev/block -name by-name)/*
# cat /proc/mounts
_allaie_ said:
Flashed successfully but there is a problem. I don't see SYSTEM under wipe and can't install any image properly. Is there any fix?
Click to expand...
Click to collapse
Hello, I also have Lenovo Tab M8 8505X and i also want to install twrp in it but i need confirm a few things first
As you said, u have successfully flashed the twrp please answer me a few questions;
Have you also flashed VM.beta and Preserve force encryption in it? or just twrp?
What stock rom was your tablet running before you installed twrp in it?
Also please tell the android version it was runing
and the kernel version too
long story short,
please send the screen shot of the 'About Tablet' section of your tablet.
make sure the screenshot is of full that it also sover the hardware specs because there are so many varients and generation of Lenovo Tab M8.
So i just want to match wether my Tablet is similar to yours before trying to flash.
aIecxs said:
copy-paste the adb output with mouse + enter key, put in [code]tags[/code] here.
while in TWRP
Code:
adb shell
# cat /etc/fstab
# ls -l $(find /dev/block -name by-name)/*
# cat /proc/mounts
Click to expand...
Click to collapse
Hello, i did not understood what you meant by 'put in [code]tags[/code]'
pls explain me
Code:
[C0DE]
put your terminal output here
[/C0DE]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
aIecxs said:
Code:
[C0DE]
put your terminal output here
[/C0DE]
View attachment 5826927
Click to expand...
Click to collapse
Code:
GOT IT, THANKS
Invinciblity said:
Hello, I also have Lenovo Tab M8 8505X and i also want to install twrp in it but i need confirm a few things first
As you said, u have successfully flashed the twrp please answer me a few questions;
Have you also flashed VM.beta and Preserve force encryption in it? or just twrp?
What stock rom was your tablet running before you installed twrp in it?
Also please tell the android version it was runing
and the kernel version too
long story short,
please send the screen shot of the 'About Tablet' section of your tablet.
make sure the screenshot is of full that it also sover the hardware specs because there are so many varients and generation of Lenovo Tab M8.
So i just want to match wether my Tablet is similar to yours before trying to flash.
Click to expand...
Click to collapse
I flashed twrp first, then the vbmeta via fastboot (not with twrp) and then reboot to recovery by holding power, vol+ and vol-, then releasing power key. That's how I booted successfully into that (TWRP).
And I don't require twrp now, I just reset my tab with smart and rescue assistant. I wanted to flash every treble Android 13 GSI.
My tab is on latest Android 10
Click to expand...
Click to collapse
a
_allaie_ said:
I flashed twrp first, then the vbmeta via fastboot (not with twrp) and then reboot to recovery by holding power, vol+ and vol-, then releasing power key. That's how I booted successfully into that (TWRP).
And I don't require twrp now, I just reset my tab with smart and rescue assistant. I wanted to flash every treble Android 13 GSI?
Click to expand...
Click to collapse
_allaie_ said:
I flashed twrp first, then the vbmeta via fastboot (not with twrp) and then reboot to recovery by holding power, vol+ and vol-, then releasing power key. That's how I booted successfully into that (TWRP).
And I don't require twrp now, I just reset my tab with smart and rescue assistant. I wanted to flash every treble Android 13 GSI.
Click to expand...
Click to collapse
But please send your device's About section page's screenshot
so that i can make sure it will work on my device too or not
Sure if you want to.
Here you go
If it still doesn't help, i would suggest resetting device with LENOVO SMART AND RESCUE ASSISTANT but keep in mind it will delete all your data, so proceed after doing backup.
Invinciblity said:
But please send your device's About section page's screenshot
so that i can make sure it will work on my device too or not
Click to expand...
Click to collapse
_allaie_ said:
If it still doesn't help, i would suggest resetting device with LENOVO SMART AND RESCUE ASSISTANT but keep in mind it will delete all your data, so proceed after doing backup.
Click to expand...
Click to collapse
Thanks a lot for this help
I have matched with mine
and found that only the stock rom is diffrent
your's is the updated one
but i wasn't able to update bcz i have unlocked my device
Else everything is same-to-same
So i'm gonna flash it
Again thanks a lot
@_allaie_ System is working now in TWRP? or do you still want me to fix? waiting for the partitions info...
aIecxs said:
@_allaie_ System is working now in TWRP? or do you still want me to fix? waiting for the partitions info...
Click to expand...
Click to collapse
Thanks for your help. But I've replaced twrp with stock one. As I said, i just wanted to flash GSI but now with fastboot it works fine.
Thanks Again
Invinciblity said:
Thanks a lot for this help
I have matched with mine
and found that only the stock rom is diffrent
your's is the updated one
but i wasn't able to update bcz i have unlocked my device
Else everything is same-to-same
So i'm gonna flash it
Again thanks a lot
Click to expand...
Click to collapse
You need Smart and Rescue Assistant on PC and it can update your tab even with unlocked bootloader. After successful rescue, bootloader will get locked again. Hope it helps
_allaie_ said:
You need Smart and Rescue Assistant on PC and it can update your tab even with unlocked bootloader. After successful rescue, bootloader will get locked again. Hope it helps
Click to expand...
Click to collapse
Thanks for informing about this tool, it made things easier!