[HELP] LOST EFS PARTITION - Android Q&A, Help & Troubleshooting

I lost my EFS partition when recovered my phone via EDL, crying now
Well, I flashed Engineering Rom from here https://androidfilehost.com/?fid=4349826312261824846
And I changed IMEI1 IMEI2 MAC and BT addresses through some tools (Qualcomm IMEI Repair Tool / QMSL IMEI&SN Writer v1.4)
Rebooted system after changes made...
F*** It's ok! I see "20:00:00:00:00" at mac address info while wifi is off, IMEI SV info is "00" and changing serial doesn't worked.
The changed wifi address value only works while Engineering Rom is running, otherwhise the value changes back to 00:0a:f5:e8:b9:f8 ohhhhh f***, this happens when I update to stock rom.
I have QFIL and QPST installed on my machine, I enter diagnostic mode and I can see the contents of the EFS partition, my doubts are: is there a way to permanently change the data in "IMEI1 IMEI2 IMEI SV SN BT WIFI etc." so that new roms read the "default"?
What are the value chains I should change? .xqcn file editing made global changes?
Please help me

Please someone help me

I am able to pay for a program like this, I just want to factory restore

Devmobdroid said:
I am able to pay for a program like this, I just want to factory restore
Click to expand...
Click to collapse
Dm me

Related

[Q] IMEI is correct but no network detected MT65xx

First I'm so sorry if my question is similar with another threads. But I'm pretty sure I have been looking for the answer around the internet and of course XDA developer for a week. I follow every guide and method I found. But it still not answer of my problem.
I flashing camera driver I've got from my friend backup using TWRP backup. Actually I only need to choose uboot only to install. But I'm in hurry so I accidentally choose everything includes NVRAM. Since then I've got wrong IMEI on my phone because the IMEI overwritten with my friend phone. But it's not a problem because I can restore my original IMEI with MTKDroid & Tools.
And the problem is my IMEI is now back and corrected. But there is no network detected on the phone. SIM card detected fine. When I go to EngineerMode by pressing *#*#3646633#*#* and open Radio Information on CDS I saw IMSI field was unknown and Radio Status is turning on and off rapidly.
What I have done is :
1. Full flashing with the stock ROM via SP Flash Tools.
2. Change the IMEI with MTK Droid Tools
3. Change the IMEI with AT command ... echo 'AT+EGMR=1,7,"myIMEI1"' >/dev/pttycmd1
No result. IMEI is correct but no network.
I believe this is not a hardware problem, so please help me to solve this problem. Because it's my only phone to communicate with my whole families. I really appreciate with your help. Thanks.

[Q] IMEI Writting

Good day People,
I don't want to beat around the bush so, I installed customROM works fine. then I reverted back to stockROM then IMEI is gone.
I tried the Engineering mode thing, I tried multiple IMEI Writers non of them works for me. I always have this error "meta mode entry fail" for some reason I don't know what to do.
I do have an MTK Based phone its dual Sim.
MT6582
Cherry Mobile Fuze Q390
Can someone help me. I don't know if I am on the right thread but it says ask anything.
Thanks in Advance.
phaw16 said:
Good day People,
I don't want to beat around the bush so, I installed customROM works fine. then I reverted back to stockROM then IMEI is gone.
I tried the Engineering mode thing, I tried multiple IMEI Writers non of them works for me. I always have this error "meta mode entry fail" for some reason I don't know what to do.
I do have an MTK Based phone its dual Sim.
MT6582
Cherry Mobile Fuze Q390
Can someone help me. I don't know if I am on the right thread but it says ask anything.
Thanks in Advance.
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=2400829
Press Thanks if helped.
hnkotnis said:
Try this
http://forum.xda-developers.com/showthread.php?t=2400829
Press Thanks if helped.
Click to expand...
Click to collapse
I WHOLE formatted my Cherry Mobile Fuze Q390 (MT6582) with SP Flash Tool. Then I flashed the official firmware of this device with SP Flash Tool. I don't have any backups because I am reverting to stock. Now the phone works fine but it does NOT detect the SIM card. Also, the IMEI is shown as "INVALID" for both SIM slots when I input *#06#. When I try to fix IMEI from MTK Droid Tools it shows (ERROR : pttycmd1 device NOT found!). Also, MTK Droid Tools shows (Baseband V -----). I am sure the problem is that when I formatted the phone it wiped the NVRAM region too. So the device has no baseband or radio files right not and also the data/nvram/md folder has nothing in it. Although, WiFI still works perfectly except the annoying NVRAM Warning that I kept on seeing when ever that I wanted to connect to a network. Now the official firmware of Cherry Mobile Fuze Q390 does not contain any nvram.bin file. It does contain the BPLGU file but I can't seem to modify IMEI with SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. I tried using the MTK Engineering mode mode also and tried to write it using the AT+ code but it keeps on saying failed to send command. Probably the SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. only modify the IMEI when the baseband or radio files are already present on the phone. So I think the only way out for me is to flash a nvram.bin using SP Flash Tool or Flash nvram.bin+nvram.tar to MTK Droid Tools which I don't have. Any ideas whether I am on the track or not? If I am, then how can I get the IMEI back on my phone. As you people can see that I have tried a lot of things, so please suggest/advice accordingly and any help would be greatly appreciated.
phaw16 said:
I WHOLE formatted my Cherry Mobile Fuze Q390 (MT6582) with SP Flash Tool. Then I flashed the official firmware of this device with SP Flash Tool. I don't have any backups because I am reverting to stock. Now the phone works fine but it does NOT detect the SIM card. Also, the IMEI is shown as "INVALID" for both SIM slots when I input *#06#. When I try to fix IMEI from MTK Droid Tools it shows (ERROR : pttycmd1 device NOT found!). Also, MTK Droid Tools shows (Baseband V -----). I am sure the problem is that when I formatted the phone it wiped the NVRAM region too. So the device has no baseband or radio files right not and also the data/nvram/md folder has nothing in it. Although, WiFI still works perfectly except the annoying NVRAM Warning that I kept on seeing when ever that I wanted to connect to a network. Now the official firmware of Cherry Mobile Fuze Q390 does not contain any nvram.bin file. It does contain the BPLGU file but I can't seem to modify IMEI with SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. I tried using the MTK Engineering mode mode also and tried to write it using the AT+ code but it keeps on saying failed to send command. Probably the SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. only modify the IMEI when the baseband or radio files are already present on the phone. So I think the only way out for me is to flash a nvram.bin using SP Flash Tool or Flash nvram.bin+nvram.tar to MTK Droid Tools which I don't have. Any ideas whether I am on the track or not? If I am, then how can I get the IMEI back on my phone. As you people can see that I have tried a lot of things, so please suggest/advice accordingly and any help would be greatly appreciated.
Click to expand...
Click to collapse
Hello can you provide me a link where i can download cherry mobile fuze stock firmware thanks you very much
phaw16 said:
I WHOLE formatted my Cherry Mobile Fuze Q390 (MT6582) with SP Flash Tool. Then I flashed the official firmware of this device with SP Flash Tool. I don't have any backups because I am reverting to stock. Now the phone works fine but it does NOT detect the SIM card. Also, the IMEI is shown as "INVALID" for both SIM slots when I input *#06#. When I try to fix IMEI from MTK Droid Tools it shows (ERROR : pttycmd1 device NOT found!). Also, MTK Droid Tools shows (Baseband V -----). I am sure the problem is that when I formatted the phone it wiped the NVRAM region too. So the device has no baseband or radio files right not and also the data/nvram/md folder has nothing in it. Although, WiFI still works perfectly except the annoying NVRAM Warning that I kept on seeing when ever that I wanted to connect to a network. Now the official firmware of Cherry Mobile Fuze Q390 does not contain any nvram.bin file. It does contain the BPLGU file but I can't seem to modify IMEI with SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. I tried using the MTK Engineering mode mode also and tried to write it using the AT+ code but it keeps on saying failed to send command. Probably the SN Write Station, Maui META 3G, IMEI&SN Writer V1.5.3 and etc. only modify the IMEI when the baseband or radio files are already present on the phone. So I think the only way out for me is to flash a nvram.bin using SP Flash Tool or Flash nvram.bin+nvram.tar to MTK Droid Tools which I don't have. Any ideas whether I am on the track or not? If I am, then how can I get the IMEI back on my phone. As you people can see that I have tried a lot of things, so please suggest/advice accordingly and any help would be greatly appreciated.
Click to expand...
Click to collapse
hey dude .did your phone fix??
a114 user mt6582
hi dude did u resolve that ..now i got that problem man ..the thing which happend to u turned to me just formatted completley and now suffering...searching solutions for two days....jus tell me if u find the solution dude ... email to [email protected]
we have a same problem.
I fixed my phone (FUZE) ... .
just flash the phone in Firmware with "SEC_RO" file.
Fix IMEI, at least for MT6589 Gigabyte GSmart Aku A1 (if *#06# show Invalid IMEI):
Call *#*#3646633#*#* Engineer mode, Connectivity, CDS Info, Radio Info,
Phone 1: AT+EGMR=1,7,"myIMEI" <send>
Phone 2: AT+EGMR=1,10,"myIMEI2" <send>
Hello @phaw16, @nandhu.crab19 : Can you resolve that problem?
I have the same here my phone is Blu Dash 5.5 D470u with mt6582 processor.
The meta mode is failed to connect. Drivers are ok.

How to repair serial number in MTK phone?

HI, I have an MT6582 phone without nvram folder, in my phone the serial number is necessary for OTA updates, but I lost it with the format option in SP flashtool.
I have a nvram folder of another identical phone but when i restore it, everything is restored unless the serial number. It still 0123456789ABCDEF.
How do I fix ?, Is the serial number stored anywhere else?
Thanks for the help and sorry for my english.
EDIT: I also tested the SN write tool and IMEIS work but S/N still 0123456789ABCDEF
Nothing?
hi i have thl4000 mt6582 with same problem , imei lost after every flash of custom rom, but can repair with sp flash tool, but serial writer not working.

[Q] Missing pttycmd1: How to restore?

Hi,
I tried to install TWRP on my MTK Device (Lenovo P780 8GB ROW) and run superuser.zip but after it process it my baseband and IMEI were gone.
Following all the procedures and using different type of tools on different websites including XDA, nothing can actually fix it.
One thing that complicates the problem being solved is the missing dev/radio file contents and the /dev/pttycmd1.
Even going to META MODE by turning of the device seems to be a hassle (just a gray background nothing else.
The WIFI-BT-MAC Address information are still intact and working (good to see it)
These are the tools i used so far.
MTKDroid - detected but not able to restore IMEI due to missing pttycmd1.
-
MIUI - cannot detect phone in META MODE
-
SN Writer - cannot detect phone in META
-
MobileUncle - cannot restore my IMEI backup / said it restore and restart but still the same
-
Manually did the engineering mode AT+ command. Failed.
-
SP Flash - firmware upgrade and download all - not able to restore baseband / IMEI (havent tried to format - as these might delete the MAC-WIFI-BT data as well or worst brick the device.
What is the pttycmd1? How can I restore it? Does baseband need to be restored first prior to changing IMEI? How do I restore baseband without backup?

[SOLVED] My phone don't have IMEI code

Hello, i'have redmi note 9 (merlin).
I had brick my phone with MTK (all data deleted).
But actually i'have flash my phone with stock rom (android 11, miui 12.5.4) and i root this (magisk) and it work!
But my MEI code not are in my phone
no IMEI = no sms, no 4g, ...
How to write my old IMEI code on my phone ?
(I still have the phone box, so I know the old code)
Thanks in advance <3
(i'm french, sorry for my spelling)
Changing or repairing an IMEI code is considered illegal in some countries/regions. But, if you still have a box as you said, you can search online on how to repair the deleted IMEI number. Losing an IMEI is rare and occurs if you've done something to the critical partitions.
Also, could you see any signal on your phone before rooting it with magisk? Or, was it gone right after the main flash?
Mineplayerminer said:
Changing or repairing an IMEI code is considered illegal in some countries/regions. But, if you still have a box as you said, you can search online on how to repair the deleted IMEI number. Losing an IMEI is rare and occurs if you've done something to the critical partitions.
Also, could you see any signal on your phone before rooting it with magisk? Or, was it gone right after the main flash?
Click to expand...
Click to collapse
My IMEI has deleted after repair my phone with SP Flash Tool.
It's good ! I have write my IMEI on my phone.
I use MTK META Utility (for run phone on "META MODE")
and i use Modem META for write IMEI
My problem is solved!
Loyerss said:
It's good ! I have write my IMEI on my phone.
I use MTK META Utility (for run phone on "META MODE")
and i use Modem META for write IMEI
My problem is solved!
Click to expand...
Click to collapse
can you give ne guide bro?
Loyerss said:
It's good ! I have write my IMEI on my phone.
I use MTK META Utility (for run phone on "META MODE")
and i use Modem META for write IMEI
My problem is solved!
Click to expand...
Click to collapse
PLEASE TELL WHICH FILE FROM WHERE TO DOWNLOAD AND WHAT ARE THE STEPS????

Categories

Resources