Hello i am trying to get stock firmware through e-recovery (currently on pixel experience)
tried that decrypt method and tried flash stock recovery .
Related
Hello guys
I was on stock android and stock recovery oos 3.1.3. I tried to change recovery using fastboot so i tried so many recovries, but unable to flash anyone then i found twrp recovery by teamspark so i flashed it and successfully done, but problem with it is, i am not able toh flash paranoid rom and stock rom using this recovery and even the stock recovery is also not flashable now, just stuck on logo whenever i flash stock recovery. So which recovery i can use which can correctly flashable and i can flash paranoid rom by that successfully.
Thanks in advance.
Flash old stock recovery followed by any OOS 2.X.X firmware . Now you can proceed with PA. Note dont use any of the twrp's designed for mm bootloader.
Rajatdembla said:
Hello guys
I was on stock android and stock recovery oos 3.1.3. I tried to change recovery using fastboot so i tried so many recovries, but unable to flash anyone then i found twrp recovery by teamspark so i flashed it and successfully done, but problem with it is, i am not able toh flash paranoid rom and stock rom using this recovery and even the stock recovery is also not flashable now, just stuck on logo whenever i flash stock recovery. So which recovery i can use which can correctly flashable and i can flash paranoid rom by that successfully.
Thanks in advance.
Click to expand...
Click to collapse
First of all, you have to downgrade your bootloader. Then you can flash any recovery for the old bootloader.
Thanks i m done now
Exodusche said:
Flash old stock recovery followed by any OOS 2.X.X firmware . Now you can proceed with PA. Note dont use any of the twrp's designed for mm bootloader.
Click to expand...
Click to collapse
Thank you so much brother now i m able to flash.
Hello all
I have been using CM13 so far on my Redmi Note 3 (Snapdragon). I would like to flash official Miui 8 recovery ROM. I have "twrp cofface" recovery. However, whenever I try to flash the .zip via my twrp recovery, it re-locks the bootloader and replaces my twrp with stock recovery and effectively the phone goes into boot loop.
I have unlocked my bootloader officially. Could anyone tell me how do I flash Miui ROM from TWRP recovery? Do I need another variant of the TWRP? I dont want to flash Miui ROM via fastboot as it would involve installing mi flashing tool. Is it possible to flash Miui via twrp without re-locking bootloader and also keeping the custom recovery?
Thanks.
I just found out I need to flash alka twrp. I did so and now I can flash Miui 8 without any problems. Please close this thread. Thanks.
Here is the Solution watch this video
https://www.youtube.com/watch?v=kTdKmceC5xU
am not able to update twrp
twrp-3.1.0-0-onyx.img
twrp-3.0.3-0-onyx.img
twrp-3.0.2-1-onyx.img
when i flashed these files using twrp and rebooted my device i was stuck in one plus logo.
Even i cant flash any of above 3 twrp files using fastboot adb method i am getting an error "remote dtb not found" pls check screenshot
then i reinstalled twrp-3.0.2-0-onyx.img using adb fastboot method , but i cant not install or update version above 3.0.2.0 plz help
Hi guys if anyone facing same problem Read this
PROBLEM
1)Error Code 7 while flashing new ROM (like Nogut ROMS ).
2)Remote dtb not found while updating old twrp to new (eg. twrp 2.8 to twrp 3.1.0.0)
Cause of problem
Users who have already flashed and rooted their phone and using custom ROMs like CM12 CM 13 or any other from past year will likely to face this problem
while updating twrp recovery or while updating to new custom ROM Nogut cm14 .
Because new custom ROMs have bootloader in diffrent partition (something like this) so you wont be able to flash your phone with new ROMs i.e cm14 or nogut or you wont be able to flash new twrp recovery which is 3.1.0.0
Please keep in mind if you are using following twrp version then you should flash your phone with old twrp 2.8.7.0
twrp-3.0.2-0-onyx.img 14.4M 2016-04-04 23:04:23 EDT
twrp-3.0.1-0-onyx.img 14.5M 2016-04-01 04:24:54 EDT
twrp-3.0.0-1-onyx.img 14.5M 2016-02-15 23:17:25 EST
twrp-3.0.0-0-onyx.img 14.4M 2016-02-06 09:18:41 EST
above point is important look at the solution now
Solution
Step
1)flash your phone with old twrp version TWRP 2.8.7.0 using fastboot method(because we are going to install stock recovery in my case stock recovery of oneplus X lollipop version)
2)after installing stock recovery install 2.14 ver of stock ROM of oneplus X (for oneplus x devices) (for other brands eg samsung look for ur old stock recov and ROM)
3)install old Stock ROM in ur device
4)now again boot into stock recovery and install latest stock ROM (for oneplus X i installed latest oneplus X oxygen OS 3.1.4).
5)after doing above step you can install latest twrp-3.1.0-0-onyx.img without any "remote dte not found error" using fastboot.
6)once you flash twrp-3.1.0-0-onyx.img flash your phone with latest CM14 or any latest android N or nogut ROM without any problem
Note : For error code 7 some people suggested to edit udatescrip file which is not good solution and it is temporary and it wont work for all so do it as i suggested
Comman ERRORS :
1) if you are on twrp 3.x.x.x you will face Remote dte not found while booting your phone in stock recovery using fastboot
so first of all flash your phone with old twrp 2.8.7.0.
2)Do not wipe your internal storage in frustration it will create more problems because you wont be able to transfer files into your phone to flash it (Use OTG cable or SD card if u did it already).P.S you can do it afterwards
Do i need to install stock recovery of stock ROM ? some help would really be appreciated
i can install all twrp upto "twrp3020 " version
but if i try to flash greater version like twrp3021 or twrp3100 m getting same error
i need new twrp because i am not able to flash Android N custome roms i am getting an error code 7 when i am installing ROM
Follow the mega unbrick guide, then update your bootloader then flash latest twrp.
@Joshwin Aranha
CheckYourScreen said:
Follow the mega unbrick guide, then update your bootloader then flash latest twrp.
@Joshwin Aranha
Click to expand...
Click to collapse
thanx for replay but i found solution
Hi guys if anyone facing same problem Read this
PROBLEM
1)Error Code 7 while flashing new ROM (like Nogut ROMS ).
2)Remote dtb not found while updating old twrp to new (eg. twrp 2.8 to twrp 3.1.0.0)
Cause of problem
Users who have already flashed and rooted their phone and using custom ROMs like CM12 CM 13 or any other from past year will likely to face this problem
while updating twrp recovery or while updating to new custom ROM Nogut cm14 .
Because new custom ROMs have bootloader is diffrent partition (something like this) so you wont be able to flash your phone with new ROMs i.e cm14 or nogut or you wont be able to flash new twrp recovery which is 3.1.0.0
Please keep in mind if you are using following twrp version then you should flash your phone with old twrp 2.8.7.0
twrp-3.0.2-0-onyx.img 14.4M 2016-04-04 23:04:23 EDT
twrp-3.0.1-0-onyx.img 14.5M 2016-04-01 04:24:54 EDT
twrp-3.0.0-1-onyx.img 14.5M 2016-02-15 23:17:25 EST
twrp-3.0.0-0-onyx.img 14.4M 2016-02-06 09:18:41 EST
above point is important look at the solution now
Solution
Step
1)flash your phone with old twrp version TWRP 2.8.7.0 using fastboot method(because we aree going to install stock recovery in my case stock recovery of oneplus X lollipop version)
2)after installing stock recovery install 2.14 ver of stock ROM of oneplus X (for oneplus x devices) (for other brands eg samsung look for ur old stock recov and ROM)
3)install old Stock ROM in ur device
4)now again boot into stock recovery and install latest stock ROM (for oneplus X i installed latest oneplus X oxygen OS 3.1.4).
5)after doing above step you can install latest twrp-3.1.0-0-onyx.img without any "remote dte not found error" using fastboot.
6)once you flash twrp-3.1.0-0-onyx.img flash your phone with latest CM14 or any latest android N or nogut ROM without any problem
Note : For error code 7 some people suggested to edit udatescrip file which is not good solution and it is temporary and it wont work for all so do it as i suggested
Comman ERRORS :
1) if you are on twrp 3.x.x.x you will face Remote dte not found while booting your phone in stock recovery using flashboot
so first of all flash your phone with old twrp 2.8.7.0.
2)Do not wipe your internal storage in frustration it will create more problems because you wont be able to transfer files into your phone to flash it (Use OTG cable or SD card if u did it already).P.S you can do it afterwards
mhmm.. the unbrick guid dosnt help.. followd the guidé - now my bootloader is locked and stuck locked so no 2.8.7.0 flashing.. Ideas? i`m working now 24h this issue..
Wagner.B said:
mhmm.. the unbrick guid dosnt help.. followd the guidé - now my bootloader is locked and stuck locked so no 2.8.7.0 flashing.. Ideas? i`m working now 24h this issue..
Click to expand...
Click to collapse
are you on stock recovery right now ?
Finaly the Lv.2 support got it back working via "our" msm unbrick tool (Still got it on my drive =D)
but learned nothing - trying to get lineageOS again.
The recovery is now TWRP v3.1.0-0 for E1003_15_161107 (it works for now on a backup..)
But... i must say - I'm very worried that i cant flash lineage again..
I dont know what the trick is...
Here is the Solution watch this video
https://www.youtube.com/watch?v=kTdKmceC5xU
Yes!!
I ve been looking for a solution the past days since i got stuck in older twrp versions and could only upgrade to android 6.
Thanks man!! You rock!!
Two days before i just flash official miui 10 on my kenzo and then i found my twrp remove and stock one is present automatically,but my trouble is now i cant flash twrp on my kenzo(miui 10),before i flash twrp via (only twrp installer)(miui9),but now on that method i cant install twrp(miui10) ,pls any dev give me some advice about twrp install on my kenzo(miui10).
EDIT: I figured it out myself, for anyone else in the same situation: I downloaded the proper Stock Rom for my phone and just flashed it with fastboot flash, no custom recovery was needed. After that I simply flashed Lineage OS and it's working like a charm.
Hello, I recently switched back to an Android phone that's why I'm a bit rusty. I successfuly installed Resurrection Remix on my Huawei P20 Lite.
After realizing there is no Notch support I decided to go back to stock or switch to Lineage OS.
Now I have two questions:
1) On the OpenKirin page it says you need stock EMUI 8.0 before you apply one of their ROMs. Does this mean if I want to switch to Lineage OS I need to go back to stock EMUI or can I go from RR to Lineage?
2) I downloaded 'Huawei P20 Lite-ANE-LX1 8.0.0.144(C432).zip' from xda which is supposed to be the stock rom. In the instructions on here it says I need to install TWRP. However OpenKirin says their ROMs don't work with TWRP. Can I just flash the stock firmware with adb fastboot, like described in the OpenKirin FAQ?
So my question basically is, what do I have to do to go from RR with stock recovery back to stock EMUI?
im in the same problem.. my fone brick in twrp logo.... i dont know how pass this logo
You can use eRecovery to download the entire ROM, you need the stock recovery and flash it with fastboot (fastboot flash recovery_ramdisk recovery_ramdisk.img) then go to the recovery mode and download the rom using WiFi and that's all, as advice I recomend you always make a system backup in the sdcard using TWRP. Sorry for my bad english. You can dowload the recovery here
Dre0x said:
You can use eRecovery to download the entire ROM, you need the stock recovery and flash it with fastboot (fastboot flash recovery_ramdisk recovery_ramdisk.img) then go to the recovery mode and download the rom using WiFi and that's all, as advice I recomend you always make a system backup in the sdcard using TWRP. Sorry for my bad english. You can dowload the recovery here
Click to expand...
Click to collapse
Thanks... i made this and everything ok now
illyx said:
EDIT: I figured it out myself, for anyone else in the same situation: I downloaded the proper Stock Rom for my phone and just flashed it with fastboot flash, no custom recovery was needed. After that I simply flashed Lineage OS and it's working like a charm.
Click to expand...
Click to collapse
What file did you flash in fastboot, the full-ota file?