Hi,
can someone help me unbrick an x401?
I tried to flash an original firmware provided by manufacturer, but it doesn't work.
Phone can connect to win7 and COM port persinstenly appears in device manager while running SP flash tool which at the end says: "download complete"
But it still doesn't boot and show only white screen when connected via USB cable.
Any suggestion?
Hello all,
I have a rooted Micromax A58 which was perfectly working. I did a full nandroid backup of it 2 days ago. On yesterday, I was moving some system app (google maps, play store etc) to SD with some software) so that I could increase the internal memory and install some other softwares. But, unfortunately, after that modification, the phone stopped working properly (it was stucking up when the BOLT logo was reached). So, I started it in recovery and do a wipe cache and factory reset. After that, the phone is always going to Factory Mode.
Then I tried to Flash the Stock ROM using Flash Tool but was unsuccessful multiple times. After the scatter file selected, when I clicked the 'Download' (or even firmware upgrade), all time time, the phone was disconnecting/reconnecting every now and then and nothing happened after (even though I already installed the Vcom and PdaNet driver in the PC). So, I had to quit. I am attaching herewith the logs of the Flash Tool lastly tried.
Now, when I am starting the phone power button, nothing is happening.. NOTHING but black screen...
I am a bit worried.. your help very much appreciated. Please let me know for any information needed. Thanks.
'No com port detected' error
I tried another time and the problem still there.. When in SP Flash Tool, I select scatter file, click 'Download' and connect the phone to PC, the process doesn't progress further. So, I have to finally click 'Stop' to quit. In the logs, it shows--
"No com port detected.."
Attaching the trace logs file herewith.
Please advice how to resolve the issue.. I am totally stuck now. Thanks.
Androhelp said:
Hello all,
I have a rooted Micromax A58 which was perfectly working. I did a full nandroid backup of it 2 days ago. On yesterday, I was moving some system app (google maps, play store etc) to SD with some software) so that I could increase the internal memory and install some other softwares. But, unfortunately, after that modification, the phone stopped working properly (it was stucking up when the BOLT logo was reached). So, I started it in recovery and do a wipe cache and factory reset. After that, the phone is always going to Factory Mode.
Then I tried to Flash the Stock ROM using Flash Tool but was unsuccessful multiple times. After the scatter file selected, when I clicked the 'Download' (or even firmware upgrade), all time time, the phone was disconnecting/reconnecting every now and then and nothing happened after (even though I already installed the Vcom and PdaNet driver in the PC). So, I had to quit. I am attaching herewith the logs of the Flash Tool lastly tried.
Now, when I am starting the phone power button, nothing is happening.. NOTHING but black screen...
I am a bit worried.. your help very much appreciated. Please let me know for any information needed. Thanks.
Click to expand...
Click to collapse
Try changing the ports, Cable etc or better off try on a different computer .
Port/Cable/PC change didn't help
kapil_dheer said:
Try changing the ports, Cable etc or better off try on a different computer .
Click to expand...
Click to collapse
Hello Kapil,
Thanks for the response. Yesterday I tried with separate laptop, but the same problem was there. Today, I tried with the different USB port.. but didn't help.
It seems that the driver can not recognize the device and when I connect the phone, it is just in a loop of disconnecting/re-connecting. Please advice further. Thanks.
Only option now seems is Service Centre.
The guys are pretty dumb. I've tested samsung motorola etc.....they don't even know what root is.
Maybe they'll be unable to identify what you tried to do.
You can give any reason for it not functioning.
Good luck.
kapil_dheer said:
Only option now seems is Service Centre.
The guys are pretty dumb. I've tested samsung motorola etc.....they don't even know what root is.
Maybe they'll be unable to identify what you tried to do.
You can give any reason for it not functioning.
Good luck.
Click to expand...
Click to collapse
Thank you Kapil for the advice. As Micromax service centre is not having a good reputation regarding these, so I would go for that option as the last resort.
Before that, can I please ask the other members for giving further advice if there is any option to try with.. Thanks for your help.
Managed to get phone reconized in PC usb-pls help further
Androhelp said:
Thank you Kapil for the advice. As Micromax service centre is not having a good reputation regarding these, so I would go for that option as the last resort.
Before that, can I please ask the other members for giving further advice if there is any option to try with.. Thanks for your help.
Click to expand...
Click to collapse
I have managed to get the phone recognized by PC usb now. But, when I try try the SP Flash utility to either Format or Download or Firmware update etc, it is throwing error like below--
09/16/2014 09:56:32.640 FlashTool[2212][3912][D]: APCore::Connection::ConnectDA(): Failed to Connect DA: S_FT_ENABLE_DRAM_FAIL(..\QT_FlashTool_Refactor\Conn\Connection.cpp,126)
09/16/2014 09:56:38.140 FlashTool[2212][3912][D]: BackgroundWorker::run(): BROM Exception! ( BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM Failed!
[HINT]:
Please check your load matches to your target which is to be downloaded.)((APCore::Connection::ConnectDA,..\QT_FlashTool_Refactor\Conn\Connection.cpp,127))(..\QT_FlashTool_Refactor\UI\src\BackgroundWorker.cpp,94)
09/16/2014 09:56:58.765 FlashTool[2212][2708][D]: OptionDialog::winEvent(): USB Device Removed.(..\QT_FlashTool_Refactor\UI\src\OptionDialog.cpp,483)
09/16/2014 09:56:59.750 FlashTool[2212][2708][D]: OptionDialog::winEvent(): USB Device plug in.(..\QT_FlashTool_Refactor\UI\src\OptionDialog.cpp,478)
09/16/2014 09:57:33.828 FlashTool[2212][2708][D]: OptionDialog::winEvent(): USB Device Removed.(..\QT_FlashTool_Refactor\UI\src\OptionDialog.cpp,483)
09/16/2014 09:57:34.812 FlashTool[2212][2708][D]: OptionDialog::winEvent(): USB Device plug in.(..\QT_FlashTool_Refactor\UI\src\OptionDialog.cpp,478)
09/16/2014 09:58:08.890 FlashTool[2212][2708][D]: OptionDialog::winEvent(): USB Device Removed.(..\QT_FlashTool_Refactor\UI\src\OptionDialog.cpp,483)
09/16/2014 09:58:10.375 FlashTool[2212][2708][D]: OptionDialog::winEvent(): USB Device plug in.(..\QT_FlashTool_Refactor\UI\src\OptionDialog.cpp,478)
I tried the above multiple times but everytime same error as above.
When tried to connect the phone (without battery) it is disconnect/reconnect in an endless loop.
When try to connect with battery, the disconnect/reconnect loop is gone (i.e.-stable) but sometime it can not identity phone ('Unknown Device').
Also tried to press volume down button along with battery inside, but showing 'Unknown Device' and Flash tool getting hanged.
I used the Stock Rom downloaded from xda site for my phone detailed below---
Android 4.2.2
Model Micromax A58
BaseBand version- MOLY.WR8.W1315.MD.WG.MP.V1.P11 2013/09/04 15:51
Kernel 3.4.5 [email protected] #1
Build Number Micromax A58_T09
I also have the good nandroid backup (if it could be of any use) but phone is dead now. Confused how to go forward. Please help.
Download in SP Flash Tool successful
Androhelp said:
I have managed to get the phone recognized by PC usb now. But, when I try try the SP Flash utility to either Format or Download or Firmware update etc, it is throwing error like below--
09/16/2014 09:56:32.640 FlashTool[2212][3912][D]: APCore::Connection::ConnectDA(): Failed to Connect DA: S_FT_ENABLE_DRAM_FAIL(..\QT_FlashTool_Refactor\Conn\Connection.cpp,126)
09/16/2014 09:56:38.140 FlashTool[2212][3912][D]: BackgroundWorker::run(): BROM Exception! ( BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
[EMI] Enable DRAM Failed!
[HINT]:
Please check your load matches to your target which is to be downloaded.)((APCore::Connection::ConnectDA,..\QT_FlashTool_Refactor\Conn\Connection.cpp,127))(..\QT_FlashTool_Refactor\UI\src\BackgroundWorker.cpp,94)
09/16/2014 09:56:58.765 FlashTool[2212][2708][D]: OptionDialog::winEvent(): USB Device Removed.(..\QT_FlashTool_Refactor\UI\src\OptionDialog.cpp,483)
09/16/2014 09:56:59.750 FlashTool[2212][2708][D]: OptionDialog::winEvent(): USB Device plug in.(..\QT_FlashTool_Refactor\UI\src\OptionDialog.cpp,478)
09/16/2014 09:57:33.828 FlashTool[2212][2708][D]: OptionDialog::winEvent(): USB Device Removed.(..\QT_FlashTool_Refactor\UI\src\OptionDialog.cpp,483)
09/16/2014 09:57:34.812 FlashTool[2212][2708][D]: OptionDialog::winEvent(): USB Device plug in.(..\QT_FlashTool_Refactor\UI\src\OptionDialog.cpp,478)
09/16/2014 09:58:08.890 FlashTool[2212][2708][D]: OptionDialog::winEvent(): USB Device Removed.(..\QT_FlashTool_Refactor\UI\src\OptionDialog.cpp,483)
09/16/2014 09:58:10.375 FlashTool[2212][2708][D]: OptionDialog::winEvent(): USB Device plug in.(..\QT_FlashTool_Refactor\UI\src\OptionDialog.cpp,478)
I tried the above multiple times but everytime same error as above.
When tried to connect the phone (without battery) it is disconnect/reconnect in an endless loop.
When try to connect with battery, the disconnect/reconnect loop is gone (i.e.-stable) but sometime it can not identity phone ('Unknown Device').
Also tried to press volume down button along with battery inside, but showing 'Unknown Device' and Flash tool getting hanged.
I used the Stock Rom downloaded from xda site for my phone detailed below---
Android 4.2.2
Model Micromax A58
BaseBand version- MOLY.WR8.W1315.MD.WG.MP.V1.P11 2013/09/04 15:51
Kernel 3.4.5 [email protected] #1
Build Number Micromax A58_T09
I also have the good nandroid backup (if it could be of any use) but phone is dead now. Confused how to go forward. Please help.
Click to expand...
Click to collapse
In the meanwhile, when trying to resolve the issue, I tried the following steps and after that, I lastly managed to 'download' the Stock ROM successfully in my phone (using the Windows XP OS)--
1) As I was always getting the SP Flash Tool error 4032 for last couple of days and which was clearly describing 'please check your load matches your target which is to be downloaded', so was investigating the root cause in details. Upon searching in the internet, I downloaded multiple version of Stock ROMs for my Micromax A58 model from different sources to give a try. When trying to 'Download' (in SP Flash Tool), the 'T_09' ROM (link given by 'alanvmathew') in the below mentioned URL worked for me.
http://forum.xda-developers.com/showthread.php?t=2610046&page=2
It is to be noted from the link that Micromax A58 model have 2 different Stock ROMs (i.e.- 'T_07' and 'T_09') which info I was missing all the time.
2) After identifying the scatter file in the SP Flash Tool and clicking the 'Download' option, I inserted battery in the phone and pressing the 'Power + Volume down' button, connected the device into the PC USB. Upon connected, the 'DA USB VCOM PORT' driver automatically installed and the 'Download' started and flashing of ROM went smooth. Finally, it ended up with green 'Download OK' message. Also attaching the snapshots herewith.
Will check the mobile and its performance further and revert back accordingly.
Hello.
Everything has gone terribly wrong for my phone and I desperately need your help.
I downloaded what was stated on needrom.com I made sure MTK vcom was installed properly and had the correct rom from needrom.com but I still got Brom Error: STATUS_BROM_CMD_SEND_DA_FAIL in SP flash when using MTK_AllInOne_da.bin.
I then tried DA_PL.bin and got another error. I tried to uncheck preloader and run Download through SP flash with DA_PL.bin which worked just fine. However now I'm stuck at the Bluboo logo screen and phone does not load into android.
I still get Brom Error: STATUS_BROM_CMD_SEND_DA_FAIL in SP Flash if I use MTK_AllInOne_da.bin but if I use DA_PL.bin now I get this error:
Chip mismatch!
Scatter:MT6757D
device: MT6757
Please help me, my phone is bricked until one of you help me. I'd be forever grateful!
Tomaskaos said:
Hello.
Everything has gone terribly wrong for my phone and I desperately need your help.
I downloaded what was stated on needrom.com I made sure MTK vcom was installed properly and had the correct rom from needrom.com but I still got Brom Error: STATUS_BROM_CMD_SEND_DA_FAIL in SP flash when using MTK_AllInOne_da.bin.
I then tried DA_PL.bin and got another error. I tried to uncheck preloader and run Download through SP flash with DA_PL.bin which worked just fine. However now I'm stuck at the Bluboo logo screen and phone does not load into android.
I still get Brom Error: STATUS_BROM_CMD_SEND_DA_FAIL in SP Flash if I use MTK_AllInOne_da.bin but if I use DA_PL.bin now I get this error:
Chip mismatch!
Scatter:MT6757D
device: MT6757
Please help me, my phone is bricked until one of you help me. I'd be forever grateful!
Click to expand...
Click to collapse
Don`t worry about that, first this is the link of the last update https://www.google.com/url?q=https:...ds-cse&usg=AFQjCNFJKeEcDClPU2MnxLJefaQ19GmQpQ
for more success put your folder of SPFlash Tool near to folder of your unpacked rom (for short transmission of data) and Bluboo S1 has a few different way to enter to other mtk cause battery it`s not removable like other just disconnect it and connect again; in this case connect cable usb to your device, prepare all the files in SPFlashTool and click download and now while pressing both volume + and - connect cord to pc till SPFlashTool begin to recognize files (red letters) and release now, SPFlashTool continues process till 100% in yellow progressing line
SubwayChamp said:
Don`t worry about that, first this is the link of the last update https://www.google.com/url?q=https:...ds-cse&usg=AFQjCNFJKeEcDClPU2MnxLJefaQ19GmQpQ
for more success put your folder of SPFlash Tool near to folder of your unpacked rom (for short transmission of data) and Bluboo S1 has a few different way to enter to other mtk cause battery it`s not removable like other just disconnect it and connect again; in this case connect cable usb to your device, prepare all the files in SPFlashTool and click download and now while pressing both volume + and - connect cord to pc till SPFlashTool begin to recognize files (red letters) and release now, SPFlashTool continues process till 100% in yellow progressing line
Click to expand...
Click to collapse
Thanks!!! It works!!!!
Just be very careful. The USB C connector port in the phone is very loose... so make sure you can hold the cable tight other wiser it will lose the connection and brick your phone. For me, I had to remove the Plastic cover to be able to hold the power cable tight!
Hi, could you help me please? I did your steps, but it is not working. Sp flash does all its job, shows the green sign, but the phone stills dead. What I noticed the usb connects with the phone, then it disconnects. I tried to install the drivers as the tutorials say like deactivating the driver signature enforcement, but nothig happens well.
I have a KRIP K55 Phone and a MT6739 chipset and I accidentally did a "Format Whole Flash" using "SP Flash Tool" to my phone and now my phone won't turn on, my screen is blank ,nor my PC won't recognize my phone (Even though it makes a sound when I connect it to the PC, then after a while it disconnect, then it connects again).
In Device Manager on My PC, My PC don't recognize my phone as "mt67xx" under "Unknown Device" Heading, instead it recognize it as "USB Serial Device (COM 24)" under "Ports (COM & LPT)" Heading, and I don't know what to do
Please help me
I am using "Agenew FlashTool 1728.20171228"
And when I try to download the Firmware files to my phone, it gives me this error: ERROR : STATUS_DA_EXCEED_MAX NUM (0xC0070005), and then I press download again, then it gives me another error: ERROR : STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001) and then the Firmware Files won't download to my phone, I don't know what to do
Please Help Me
I have the full Firmware files for my phone but it won't download to my phone, I really need help
If there's anyone out there that can help me
Please Help Me
Please Reply Soon
I have same problem
Hello,
May be someone can help me
My box is bricked...
Every time i tried to flash with usb burning tool, the flash stop at 2% and I have this error:
[0x10105002]Romcode/Initialize DDR/Read Initialize status/USB Controm setup error
So I flash with SD all gone fine put I don't like the rom, so I retry with SD and now: no screen..
Original build was 709D0
I changed pc, I shortened usb cable, I try with and without power supply, I always push the restore button, I try different usb burning tool version and different stock firmware...
Same error code at 2% again and again..
I don’t know what to do...
HELP!
Thanks
Hello!!
Anybody can help please? I didn't find the solution...
Thanks