Good evening / Hello / Hello,
I have a Motorola E32s and I use the firmware (XT22-2-DS) (PATX0008PL) (Carrier Retail - EURO 1), non-rooted locked bootloader. Recently, the UNNOWN CARRIER error appeared, not the SIM card data, and when I insert the card it asks for the "ME PIN" 4-16 digit code ...... I changed the team's software from the website of the service provider, my phone with unnecessary applications in it . what's the problem ???
sorry for my bad English!.
Related
Hello,
It is my first post, I just bought my htc 7 mozart.
I want to unlock it, so i could use my polish carrier sim card (carrier name Play).
I have sim-unlock code that i got after giving my imei number.
My question is when do i write this sim-unlock code?
Many quides on net say that i should insert my sim card (not orange uk but polish play) and after switching on the phone will be displayed area for entering this code.
When i turn device on i get information that there is no sim or it is invalid and i have 2 options :
1 click 'emergency call' (in this area) i cant type my unlock code.
2 click 'close' and device continues booting and after few sec i get main wp7 screen.
So i'm not asked for my unlock code.
Where in this phone is place to type sim unlock code?
I've seen some people here unlocked their htc mozarts with code, could someone write please how it can be done?
I say once again it's locked on orange uk.
Sorry for my bad english.
Thanks in advance guys.
Will debranding/flashing help?
There must be an option to unlock it via code...
When i use my polish card or no card at all in mainscreen of wp7 i see a cell 'no sim' i click it and again emergency calls only.
Where to type this sim-unlock code?
When I unlocked my Orange UK phone, it asked for a pin when I inserted my O2 sim card. This was when I entered the unlock code and after that it's been fine.
I don't see why an overseas SIM would be different, but one way round this would be to buy a UK PAYG sim from eBay or similar, then use that to unlock, then use your sim after that?
IT'S DONE
I was inserting sim card wrong way, when i had put it properly i was asked for unlock code.
I have my mango beta on it, i have to test many applications now
if someone have any questions about how to update to mango pls write ill try help.
Hello,
I'm new in WP7, I just got an HTC 7 Mozart, locked to Swiss Orange. So I wonder if is possible to unlock for free, or is there any specific tool for that. Any help would be appreciated.
hi guys first time here, i have galaxy s2 i9100 says claro when booting, not sure which country, it has spanish and portugues in the languages ., when i do the test for network lock, all four values say off, when i put my simple mobile Sim card , i swap the screen after starting it says network locked, and a figure of padlock, and a button of dismiss, nothing else no place or option to put unlock code, i press dismiss, and back to use all functions of the phone , but no phone service or network, i realized when i put the simple mobile card it addS gsm on the network options and it gives me t mobile and at&t as options when click any of them it fails to register to any, i gave it to my expert friend , he told me it is hardware locked for too many attempt to unlock it, and he will do software unlock , after three days he told me no way it is permanently locked no way to do it at all?? the phone runs android 2.3.4 model gt-i9100, baseband version i9100uhkg4, kernel version [email protected] #2, BUILD NUMBER GINGERBREAD.UHKG7, MY FRIEND TOLD ME IT CAN ONLY WORK ON ORANGE CARRIER WHICH WE HAVE NONE IN US, I EVEN OBTAINED UNLOCK CODE FOR IT BUT NO PLACE OR OPTION TO PUT THAT CODE, PLEASE HELP THANK YOU
You flashed a branded ROM, Claro is a mexican mobile network.
Why don't you go ahead and flash an unbranded ROM?
either way, you're gonna have to deal with the sim lock.
if you have a code, just insert a diffrent carrier on you device and the code screen will pop up when android starts.
here's a few threads that could help you with that matter:
http://forum.xda-developers.com/showthread.php?t=1360174
http://forum.xda-developers.com/showthread.php?t=1092451
http://forum.xda-developers.com/showthread.php?t=1289395
http://forum.xda-developers.com/showthread.php?t=2070375
http://forum.xda-developers.com/showthread.php?t=2069517
PS: Read before you do anything!
Hi All,
I'm at a loss, would be tremendously grateful if anyone could help me save my galaxy:
- My phone is an 850F, purchased sim-free from Carphone Warehouse in the UK. It is rooted.
- Recently I inserted a new sim card. The phone worked perfectly well for a week.
- Upon rebooting yesterday, the phone awoke to a message stating the sim was locked and prompted me to enter a code.
- The phone could no longer utilise the network.
To troubleshoot:
a. I inserted the sim in another phone - the sim worked fine in this other phone.
b. I tried 2 other sims for different countries in my 850F (O2 UK, T-Mobile US) - both of these sims seemed to work fine.
c. I tried a friend's sim in my phone (on the same network as my problematic sim) - it also didn't work.
d. I contacted the network of the new sim, they suggested I try 2 different 4 digit unlock codes - both failed.
e. I received a new sim from the same network - using it presents the same error message and prompt to unlock the sim.
f. Finally I wiped the phone, re-rooted and installed a new rom (Cyanogen 12).
- This has not solved the problem. In Cyanogen I receive the message: "Phone is Perso Locked". Again I am prompted to enter a code.
Thanks for reading, any help or suggestions would be immense!
Cheers,
Tal
Hi all,
I have a Huawei Mate 2 from Freedom (Wind) Mobile. I have updated it to Lollipop 5.1 by unlocking the bootloader. In fact I made a guide for it a while back.
https://forum.xda-developers.com/ascend-mate2/general/guide-step-step-wind-mobile-canada-t3387490
Recently in Canada the cellular service providers are forced by law to give us an unlock code for free. After unlocking the phone would work with any service provider. This phone has a pretty big battery and would be ideal for a travel or backup phone.
I successfully got an unlock code from Freedom (which was pretty easy). I then put in sim cards from another provider (Koodo, Fido, etc). However the screen for me to enter the unlock code never popped up. It just say "no service".
I tried to manually set it up, by clicking the notification. "No Service: Selected network (Telus 3G) unavailable". However it won't register. Neither did the unlock code entering screen ever pop up.
And under data settings it say no SIM card. However the phone works perfectly when I insert my Freedom SIM card. But when a foreign SIM card was inserted it just say no SIM.
My question is has anyone been able to unlock this phone under Lollipop 5.1? How did you get to the "Enter Unlock Code" screen?
I also wonder if anyone has any luck unlocking with the original Android 4.3. If someone did, maybe I should flash the phone back to its original OS.
Thanks in advance!
Hello, good evening
I wouldnt be starting this contact form, but honestly im out of ideas :'(.
I currently have a Huawei Y9 (Model STK-LX3 using Hilisilicom 710F) sold by phone carrier as Single SIM, as well it only shows 1 IMEI number after dialing *#06#. Heres my problem, the phone does have a sim tray that accepts both nano SIM/SD Card or Dual Nano SIM mode, unlocked for all networks. After insterting both SIMs, phone still reads only 1 since it only shows 1 IMEI (as well SIM Manager does not show in mobile network settings).
Instructions on the box itself says that is DUAL sim, an its sold as single sim in Central America.
I thought that it was a firmware issue and reinstalled another one, based on my location i use C605 in build number, ive tried unlocking bootloader with DC Unlocker, HCU Client and HUawei Multi tool, but all throws an error for security patch not supported.
Someone already told that its a certificate missing that activates sim reader on the slot 2 for the second SIM. But problem is that theres little or no information on how and what is the type used for my model. since you are in the firmware/cert business I wonder if you can please help me out on this I would really apprpeciate if you can help me just on pointing out what would be the certificate missing on my phone and the rest I can figure it out myself, but please im clueless on what cert type is needed.
PD: i will be trying sigmakey on testpoint to try to make this happen. I just need your guidance on the certtype needed.
.cert