Related
Hello there.....just had a few queries. First of all, I tried to unlock the bootloader, but it always get stuck at 50% and says the account on device is different from the account you are logged in with. I have both the adb and fastboot drivers installed, and its getting detected through adb devices and fastboot devices command. The next thing I learned from some other post of that you have to upgrade to the latest developer rom. So I downloaded it, but in updater app, its showing, "can't verify the package". I think, one can directly flash the developer rom over the stable global rom. Any help would be appreciated.
EDIT : I successfully flashed the latest global developer rom through EDL mode, using MiFlash. And, then the bootloader got unlocked in seconds.
I would like to know if you are on the Latest MIUI Global Stable release for Kenzo, or not i.e. the MIUI version will be V8.0.1.0 LHOMIDG. If yes, follow the following process to upgrade your device to the latest MIUI Global Developer version.
Caution:- This method will wipe your apps and factory reset the phone. Your internal storage shall remain unaffected. Take a backup from the settings menu first and then proceed at your own risk.
1. Download the last LP based MIUI 8 v6.8.18 from here - http://bigota.d.miui.com/6.8.18/miui_HMNote3ProGlobal_6.8.18_d0da79d09e_5.1.zip
2. Move the zip file to the root of your internal storage.
3. Open the Updater App. Click on the 3dot menu on the top right and select "Select Update package". Browse to the v6.8.18 ROM zip file and select it. The App will tell you that updating to this version will erase your data. Proceed to Erase and reboot.
4. Wait while MIUI updates.
5. Now download the latest MIUI 8 v6.9.9 based on MM from here - http://bigota.d.miui.com/6.9.9/miui_HMNote3ProGlobal_6.9.9_f26648d8b5_6.0.zip
6. Repeat everything as it is but replace the zip file to the newer one.
7. When the Phone reboots after updating. just restore your backup from the Global Stable and you shall be good to go.
Hello fellow xda members helpers and developers
I need to downgrade my Phone from Android 7 Build: C432B370 to Android 6
What do I need to make sure of in my Huawei P9 Lite Android 7 Emui 5 before following the Rollback/software upgrade procedure described in the respective Zip files.
Do I need to unroot and relock ? .. If yes which version of recovery or TWRP do I need.. if I am going to rollback.
I am a little hesitant at the moment becouse I managed to get into a bootloop yesterday by just flashing recovery_stock .
I am guessing it is becouse I unawarely flashed the wrong recovery_stock(?)
Recovery/Fastboot mode were not availiable - and then tried to flash the rollback via 3 button method.. which of course did not work.
( In case you are wondering how I managed to fix this: I let the battery drain to 0% - this broke the loop - afte the fifth try I managed to reset it with volume up + power all the way through booting)
So now I am back to square one..
Thank you
ok so I managed to fix this by myself: The problem I had was, I had a corrupted/wrong recovery on my Android 7.
So what I did was, I checked which build I excactly had .. in my case C432B370 ... downloaded the full rom. Extracted the stock recovery.img with "HuaweiUpdateExtractor" and flashed it.
Then I did the normal rollback procedure with both update.app files.
Had to unlock and root it once more... ( this time with the correct twrp) and voila it works.
So what do we learn?: dont trust simple internet guides if they not offer informations on file versions they offer ... they may not use the correct versions for your phone.
thrad can be closed or deleted
thanks for looking
So i got my Honor 5x yesterday and thought i would install a custom rom on it since people are recommending it.
Its my first time so i followed guids. I installed adb and fastboot and managed to get TWRP 3.1.1-0- on it.
Btw, i have a Honor 5x
Model KIW-L21
I am able to get into the recovery TWRP. I made a backup and saved the folder "BACKUPS" on my PC.
I then downloaded LineageOS from their Homepage: download (DOT) lineageos (DOT) org/kiwi
I downloaded the latest version. I also downloaded Gapps from Opengapps.org. I downloaded ARM64 version 7.1
I wiped my phone completely and copied the two zip files on the phone. I went to "install", selected LineageOS zip and added Gapps. i swiped right to install and the installation stopped with ERROR 7
I tried to download older versions of LineageOS but the same thing happens. ERROR 7
I then downloaded an olderversion of CM13 with GAPPS 6.0. Again, Error 7
I downloaded XENON HD ZIP from here: mirrors (DOT) c0urier (DOT) net/android/teamhorizon/N/Official/kiwi/
Error 7
I downloaded ASOP from here: downloads (DOT) aospextended (DOT) com/kiwi/
Error 7
I looked up Error 7 and its says it is a security check that figures out, that the ROM is not compatible with the Phone. Some guy told me that this happens a lot and that i should use another rom.
I looked for a solution on youtube and found a guy who said that i can do the following:
Unzip the ROM on your pc, go into \META-INF\com\google\android and open the updater script with Notepad++. Delete the first two lines that says asserts, save, close it again and zip the whole package again.
I copied the new, modifiled rom on the phone with the GAPPS and installed it. This time ERROR 7 didnt appear. GAPPS were also installed. When i boot my device i get in the loading screen from Lineage for about 5-10 minutes. After that, it just restarts and restarts and restarts. I can't get out of the boot loop since I can't remove my battery. when I press VOL UP I come back the TWRP and can wipe the phone again.
I tried that with 3 different LineageOS ROMS and one XENON HD ROM.
I also get into a boot loop where my phone just restarts and restarts and restarts.
I tried to get my backup working so I copied the folder "BACKUPS" on my phone and went to restore in TWRP. but... i found nothing there?
I am super frustrated since my phone is basically dead and I have no idea what I can do.
BTW, every site calls my phone "KIWI" but my model number is "KIW-L21"
As mentioned in Los 14.1 thread (& should be mentioned in all threads), "ROM Firmware Required: No VoLTE firmware! (B360, B370, ...)". You must downgrade your stock rom to B350 at least, before try playing with custom roms (only for kiwi, of course).
Non VoLTE Marshmallow firmware is required. As said by @mauam get in there and have the same process repeated
Thank you for your replies.
The only thing i could find was this thread: https://forum.xda-developers.com/ho...-lineageos-14-1-pre-official-kiw-l24-t3528488
It said there:
Important note:
Stock Firmware B360 and B370 are known to cause bootloops!
(Generally: if your stock ROM supports VoLTE it is likely that it is also affected!)
All others might work, please do not ask in here how to up- or downgrade!
It doesnt mentioned what that mean and even said "dont ask in here how to downgrade"
I have no idea what all that means. I dont know what stock firmware is, what version i have or how i could downgrade it. I can access TWRP, but still have no OS on it.
edit: this is the full log:
Updateing partition details...
... done
Full SElinux support is present.
MTP Enabled
Installing zip file '/sdcard/lineage-14.1-20170816-nightly-kiwi-signed.zip'
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Comparing TZ version TZ.BF.3.0.C3-00025 to TZ.BF.3.0.C3-00022") =="1"
assert failed: kiwi.verify_trustzone("TZ.BF.3.0.C3-00025") == "1"
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/lineage-14.1-20170816-nightly-kiwi-signed.zip'
Updating parition details...
...done
Click to expand...
Click to collapse
When i edit the zip file and delete the first two line of the updater scripter with notepad++ as i mentioned above, i can install these ROMS, but they wont boot / are in an infinite Bootloop
So on which firmware you were before flashing Los
PalakMi said:
So on which firmware you were before flashing Los
Click to expand...
Click to collapse
how do i check that?
I was able to get the backup running. So I am back to EMUI 3.1 / Android 5.1.1. Here is a screenshot from my phones status: i.imgur (DOT) com/rCnuOpX.png
Activehannes said:
how do i check that?
I was able to get the backup running. So I am back to EMUI 3.1 / Android 5.1.1. Here is a screenshot from my phones status: i.imgur (DOT) com/rCnuOpX.png
Click to expand...
Click to collapse
Just go to about phone
PalakMi said:
Just go to about phone
Click to expand...
Click to collapse
I did and posted a screenshot above
is it Build number "KIW-L21C432B160"
so... B160?
update:
I just downloaded this:
NEW KIW-L21 C432B350 - D003
from this thread: https://forum.xda-developers.com/honor-5x/how-to/repository-honor-5x-file-depot-t3328288
I was going to unzip it, copy the "dload" folder on my device, go the the updater and run the "local update package".
And then my phone will be on android 6.0 with b350, right?
The next step would be to start the phone in the recovery TWRP, go to wipe --> advance wipe and select everything (system, data, cache etc). after that i copy the latest Kiwi lineage OS zip rom on my device with the GAPPS 7.1 and try to install them again via TWRP 3.1.1?
Is this right?
I just wanna ask because my phone doesnt work for 2 days now and i dont want to brick it completely. cant afford a new one
Update to marshmallow first (any update before b360, like b320)
Update to marshmallow first (any update before b360, like b320)
Click to expand...
Click to collapse
when i go to the "updater" and and search for a new update it says that there is none. My phone is still on EMUI 3.1/android 5.1.1/b160. Do i need to manually download another firmware? so a B320 patch first (with the dload folder and local upgrade package) and after that the B350 upgrade?
Try manual ota here or search here. If no luck use XDA search bar &/or Google. Good luck.
Activehannes said:
when i go to the "updater" and and search for a new update it says that there is none. My phone is still on EMUI 3.1/android 5.1.1/b160. Do i need to manually download another firmware? so a B320 patch first (with the dload folder and local upgrade package) and after that the B350 upgrade?
Click to expand...
Click to collapse
Try any marshmallow update before b360.
If it didn't work, try the above post.
so i followed this guide: https://forum.xda-developers.com/honor-5x/how-to/manual-ota-update-guide-update-app-t3445976
he describes 2 methods.
I wasnt able to find a B320 update for KIW L21, only for KIW L22 which is the Indian device I think. so I downloaded KIW L21 B330 Denmark. I unzipped the file and copied the dload folder on my device,
i went to update --> menu --> local update --> UPDATE.APP
my phone restarts into TWRP and does nothing. I know that I need the EMUI stock recovery, not TWRP, but no matter how many times I do this, it always restarts into TWRP.
i also tried the other method.
I shut down my phone, press VOLUP and VOLDOWN and Power. The phone goes into the the "honor" loading screen and restats after a few seconds. and restart again and again. If i release the power button before it restarts, it just boots into the system. If I shut it down and hold VOLUP and Power it boots into TWRP. I tried so many different compinations, but i cant get my phone into the EMUI Stock recovery. I read in the other XDA thread, that i need to unlock my phone. So i tried that. i went adb reboot bootloader --> fastboot oem relock CODE. the console did its magic but my phone is still unlocked. And now i cant repeat that command. when i go again into the bootloader and type fastboot oem relock it says:
PS C:\adb> adb devices
List of devices attached
W6HDU17610003396 device
PS C:\adb> adb reboot bootloader
PS C:\adb> fastboot oem relock 1524319619165116
...
FAILED (remote: Image verify failed,relock fail)
finished. total time: 1.810s
PS C:\adb> adb devices
List of devices attached
PS C:\adb>
Click to expand...
Click to collapse
So, i still have b160 / android 5.1 on my phone :/ can anyone figure out what went wrong?
Activehannes said:
so i followed this guide: https://forum.xda-developers.com/honor-5x/how-to/manual-ota-update-guide-update-app-t3445976
he describes 2 methods.
I wasnt able to find a B320 update for KIW L21, only for KIW L22 which is the Indian device I think. so I downloaded KIW L21 B330 Denmark. I unzipped the file and copied the dload folder on my device,
i went to update --> menu --> local update --> UPDATE.APP
my phone restarts into TWRP and does nothing. I know that I need the EMUI stock recovery, not TWRP, but no matter how many times I do this, it always restarts into TWRP.
i also tried the other method.
I shut down my phone, press VOLUP and VOLDOWN and Power. The phone goes into the the "honor" loading screen and restats after a few seconds. and restart again and again. If i release the power button before it restarts, it just boots into the system. If I shut it down and hold VOLUP and Power it boots into TWRP. I tried so many different compinations, but i cant get my phone into the EMUI Stock recovery. I read in the other XDA thread, that i need to unlock my phone. So i tried that. i went adb reboot bootloader --> fastboot oem relock CODE. the console did its magic but my phone is still unlocked. And now i cant repeat that command. when i go again into the bootloader and type fastboot oem relock it says:
So, i still have b160 / android 5.1 on my phone :/ can anyone figure out what went wrong?
Click to expand...
Click to collapse
May be i can help u with this .
Hello
If you have already downloaded the updates packages, you don't need to redownload them via "System update"
Just copy them to Internal storage and follow the video
(In my case I need "update.zip" and "update_data_full_public.zip" and "update_full_VIE-L29_hw_meafnaf.zip")
https://www.youtube.com/watch?v=z4nOXgsic1o
I have all the three files, but in my case the "System Update" option on the settings just not appear. How should I procceed?
Kempf said:
I have all the three files, but in my case the "System Update" option on the settings just not appear. How should I procceed?
Click to expand...
Click to collapse
same question
what is your model VIE-???C???B???
xzanium said:
what is your model vie-???c???b???
Click to expand...
Click to collapse
vie-l29c636b370
The same as mine, lol. VIE-L29C636 running B370.
I've tried most of Firmware Finder's compatible versions B382, B384, but none of them work (through deload folder and 'forced' update).
The only one which works is the 81131 (VIE-L29C636B370).
have you tried to search in setting
also check in Setting -> Apps if they are the "System update" apps
I got b384 on system update ota
I search in setting "system update" appear but its not work, in setting->apps not appear
I'm not sure, but I think that when you have update to B370, the additional pack have not been installed.
try to download this pack update_full_hw_spcseas.zip and flash it with twrp
xzanium said:
I'm not sure, but I think that when you have update to B370, the additional pack have not been installed.
try to download this pack update_full_hw_spcseas.zip and flash it with twrp
Click to expand...
Click to collapse
i flash this in TWRP and now i cant boot to device, please help me
I downloaded rom b384 to copy to internal storage and install by twrp but not, is there any way to install rom from twrp
@vurobben, as long as I know and read about, there's no way to install it unless trough the System Update.
If your mobile is not booting, you've to download the version that allow you to update trough dload folder (in my case, the only one which do this is the 81131 - VIE-L29C636B370). Then, you've to install via TWRP the files that @xzanium said.
In my case, I'll try to do it at night. I've tried to locate the Update on the settings, and also in the apps.
And now my phone no os, i just boot in twrp recovery. Can you make a backup file in twrp and up to google drive?
sorry, my phone is VIE-L29C185
to fix your problem you must download the rollback package(C900B300) and firmware package (C636B190) from this page : http://consumer.huawei.com/kh/support/downloads/index.htm
(search for Keyword "P9 plus")
then install rollback package via 3 buttons methode (vol+ , vol- , power)
then the B190 package
I'll try to updload the files tonight.
I'm trying to do this rollback. Acually I did not know how to do it. I'll try the way @xzanium mentioned.
just extract teh zip file, then copy the dload folder to sd card
shutdown the phone
press all 3 buttons
It kind of did the trick. Now the Build Number is VIE-L19C900B300, but the EMUI is still 5.0 and Android 7.0 (Nougat). I think it'll solve @vurobben boot looping problem.
But.. the System Update option still not appear, and the clock does not work also
I'll keep trying.
Now I'm going to update for 370 (dload), then install TWRP and flash these ZIP files: 1)update_data_full_hw_spcseas, 2) update_data_full_public and 3) update_full_hw_spcseas.
[edit]
Mine is not woking anymore..
I've tried to flash the 'update_data_full_hw_spcseas', but it's in a bootloopping also. Tried to roolback again, but didn't work this time.
Now it enters in Huawei eRecovery, try to get the recovery from the server but fails..
[edit2]
I've installed the Rollback (dload), then I've downloaded the "HUAWEI P9 Plus Firmware (VIE-L29, Android6.0, EMUI4.1.1, C636B190, Thailand, Cambodia, Nonspecific)" on the same site that @xzanium mentioned and installed just after the rollback. Everithing is working now.
I've just checked and I'm on EMUI 4.1.1, Androind 6 (M) and Build VIE-L29C636B190. The goodnews is that the "System Update" is workind now. Tomorrow I'll try to update to Androin N and get everithing fine there also.
Thanks for the help.
Kempf said:
It kind of did the trick. Now the Build Number is VIE-L19C900B300, but the EMUI is still 5.0 and Android 7.0 (Nougat). I think it'll solve @vurobben boot looping problem.
But.. the System Update option still not appear, and the clock does not work also
I'll keep trying.
Now I'm going to update for 370 (dload), then install TWRP and flash these ZIP files: 1)update_data_full_hw_spcseas, 2) update_data_full_public and 3) update_full_hw_spcseas.
[edit]
Mine is not woking anymore..
I've tried to flash the 'update_data_full_hw_spcseas', but it's in a bootloopping also. Tried to roolback again, but didn't work this time.
Now it enters in Huawei eRecovery, try to get the recovery from the server but fails..
[edit2]
I've installed the Rollback (dload), then I've downloaded the "HUAWEI P9 Plus Firmware (VIE-L29, Android6.0, EMUI4.1.1, C636B190, Thailand, Cambodia, Nonspecific)" on the same site that @xzanium mentioned and installed just after the rollback. Everithing is working now.
I've just checked and I'm on EMUI 4.1.1, Androind 6 (M) and Build VIE-L29C636B190. The goodnews is that the "System Update" is workind now. Tomorrow I'll try to update to Androin N and get everithing fine there also.
Thanks for the help.
Click to expand...
Click to collapse
when rollback bootloader unlock or relock?
I could not verify yet, but I thing it does lock the bootloader again, because the bootloader option is enable under the developer settings again.
Just received the new update.
Thanks for notification, also just received it.
How to update with unlocked bootloader, TWRP and rooted with Magisk?
Download the hole update zip, flash it in TWRP and immediately Magisk afterwards?
bmwbasti said:
How to update with unlocked bootloader, TWRP and rooted with Magisk?
Download the hole update zip, flash it in TWRP and immediately Magisk afterwards?
Click to expand...
Click to collapse
Backup everything on your phone.
From what I understand; if you flash an OTA zip you'll end up on MIUI without root or TWRP unless, whilst still in TWRP after the zip has flashed, you immediately flash TWRP's image again along with Magisk without rebooting even once so that both persist.
That's if TWRP let's you flash whatever file ends up in /sdcard/downloaded_rom to begin with. Flashing MIUI zips - typically only supported by OrangeFox if I remember correctly. And if I'm right MIUI updater will download the full rom instead of an OTA if it detects a custom recovery.
I'd advise backing up everything before going ahead. If you want OTA your best bet might be to go on your PC and do "fastboot boot twrp.img" instead of "fastboot flash recovery twrp.img" then use the temporary TWRP to install the OTA zip and Magisk zip - that way it'll patch the stock bootloader.
I'd wait for someone with a little more knowledge though. I could be deathly wrong as I've only read this stuff and not updated MIUI with OTA before.
Hello Mi 9T Pro with Global ROM owners!
For someone who have installed V11.0.2.0QFKMIXM update and have ROOT => Can you please share these following two files "/vendor/lib/liboemcrypto.so" and "/vendor/lib64/liboemcrypto.so", thanks!
Micdu70 said:
Hello Mi 9T Pro with Global ROM owners!
For someone who have installed V11.0.2.0QFKMIXM update and have ROOT => Can you please share these following two files "/vendor/lib/liboemcrypto.so" and "/vendor/lib64/liboemcrypto.so", thanks!
Click to expand...
Click to collapse
https://drive.google.com/folderview?id=10zBJh6Ud8cqMykHSfrupENSc8w8C2tOz
The one named with -1 is lib64 version
And one camera bug.
In Spanish (Spain) language selected camera FC in pro mode.
In Spanish (America) all is ok.
here's the download link
https://bigota.d.miui.com/V11.0.2.0.QFKMIXM/miui_RAPHAELGlobal_V11.0.2.0.QFKMIXM_6050442ee4_10.0.zip
r4yv3n said:
https://drive.google.com/folderview?id=10zBJh6Ud8cqMykHSfrupENSc8w8C2tOz
The one named with -1 is lib64 version
And one camera bug.
In Spanish (Spain) language selected camera FC in pro mode.
In Spanish (America) all is ok.
Click to expand...
Click to collapse
Thanks! Can you post a screen of Widevine informations with "DRM Info" app? Thx again.
Any OTA at this time or just full rom?
Found ota file, downloading now
https://bigota.d.miui.com/V11.0.2.0...QFKMIXM-V11.0.2.0.QFKMIXM-a84af52957-10.0.zip
Micdu70 said:
Thanks! Can you post a screen of Widevine informations with "DRM Info" app? Thx again.
Click to expand...
Click to collapse
https://drive.google.com/file/d/10IJ_zGk77vxgeTpbOuR0GY9lhekbivSz/view?usp=drivesdk
?
This is from 11.0.1
I had to return back , stuck in fastboot ?
how much sot here?
I'm on miui 11.0.1 QFKMIXM and i am waiting for a month when 11.0.2 is available, but still now i dont have any new OTA update?? Why
Giangvo200837 said:
I'm on miui 11.0.1 QFKMIXM and i am waiting for a month when 11.0.2 is available, but still now i dont have any new OTA update?? Why
Click to expand...
Click to collapse
I think it's been withdrawn. It never officially came out of beta. They're still trying to fix a few minor Q bugs like battery drain and camera app issues; on top of that the development for MIXM in particular has been a bit behind - probably due to Chinese new year and/or Coronavirus. Though it's possible the MIXM (or Global) branch is compiled outside China; truth be told I have no idea why the Q update has been handled so badly for this particular device channel. The Mi9T Pro's development has been seemingly 'paused' as of late for Global users.
Reminds me a lot of my Redmi 5 Plus. Development was paused for much of the product's lifespan and they never fixed certain bugs on the device; just merged MIUI branch changes. Hopefully the same doesn't happen to the Mi9T Pro. It is a flagship-esque device and barely six months old (August 2019).
?Miui Global Stable Mi V11.0.2
? Android 10 | Miui 11
? 2/15/2020
?Changelog:
Deodex
Add Call, Contact and SMS MIUI
Center Clock
And You
For the Install Process MANDATORY Using Custom Recovery DX By MiRoom
If you do not use Custom Recovery DX By MiRoom, it will definitely enter Fastboot mode
? For the installation process, please see / download the video below. ?
? Download Video / Streaming: here
? Download Rom: here ?
Download vbmeta.img: here | Mirror
Download Custom Recovery DX By MiRoom Install via Fastboot mode : here
By Redmi K20 Pro Indonesia
Giangvo200837 said:
I'm on miui 11.0.1 QFKMIXM and i am waiting for a month when 11.0.2 is available, but still now i dont have any new OTA update?? Why
Click to expand...
Click to collapse
I had to download the OTA zip someone sent here and ended up manually updating. Tap a few times on the 11 in the updater until a toast message pops up saying that you enabled additional options and then tap on 3 dots and select Choose update package and browse to the zip you downloaded and select it.
Honestly I have like since forever used custom ROMs on my phones and this time I wanted to have the "stock experience", but if they keep delaying updates like this I'll just switch to xiaomi.eu weekly builds.
Since 31st of January Xiaomi suspended temporarily all updates due to the Corona virus outbreak.
How do i flash ota file manually on non rooted phone?
1. Be sure you have the correct OTA file
2. Place the OTA file in a folder of the internal storage named "downloaded_rom".
3. Go to settings/about the phone/systemupdate and tick the 3 dots on the right top
4. Then tick "choose update package" with this text or similar and go to the folder where you copied the Ota file and choose that file
Then let the Ota file update do it's work and after reboot it is done.
Snah001 said:
1. Be sure you have the correct OTA file
2. Place the OTA file in a folder of the internal storage named "downloaded_rom".
3. Go to settings/about the phone/systemupdate and tick the 3 dots on the right top
4. Then tick "choose update package" with this text or similar and go to the folder where you copied the Ota file and choose that file
Then let the Ota file update do it's work and after reboot it is done.
Click to expand...
Click to collapse
The option "Choose update package" doesn't show up unless you tap the 11 in the Updater a few times, because manually installing a .zip is an advanced (duh) option.
Was assuming that people here would know.