So I have A T95Q Anroid box wich I'n tryint ot install v9 aidains rom on. I installed win.dows 7 vm then connected my box to the tool but only got recognized for a few seconds then disconneted. The cable that I am using is this one https://ppa-usa.com/product/6ft-usb-2-0-a-male-to-a-male-cable/.
If you use Aml_Burn_Tool, but it doesn't work then your problem may be in device driver. I installed it easily on windows 11.
For more information see this:
Download Amlogic USB Burning Tool latest version 3.2.0 «
chinagadgetsreviews.com
Related
Hello,
*I have a problem with accessing phone PreLoader on Virtual COM port.*
I have NO PROBLEM with ADB driver and access. I can also access phone as a Device in Windows.
*But I want to create backup of my phone ROM.*
I want to read the ROM with SP Flash Tool to make backup.
(I cannot post links, so see full links in .txt file attached)
Phone: Alcatel IDOL One Touch Mini
Phone model code: 6012X
Full phone specs: gsmarena.com/alcatel_one_touch_idol_mini-5669.php
Chipset: Mediatek 6572
USB driver link page: developer.android.com/sdk/win-usb.html
Driver direct link: dl-ssl.google.com//android/repository/latest_usb_driver_windows.zip
OS: Windows 7, 64 bit
What I do:
------------
- I turn phone off. (Cannot remove battery - phone can not be opened=battery is not removaable)
- Connect to Windows
- Windows popup message for a device connected !
- Browse... choose driver for Win7,64bit,..... (only first time Windows wants driver)
- In Device Manager this device appear for a second, and then disappears: [PreLoader USB VCOM Port (COM_X)]
=== Result: Phone is not visible and cannot be accessed/shown in SP Flash Tool. Tried in versions 3.1224.01 (older)
and 3.1352.01 (newer interface).
What I tried to troubleshoot:
---------------------------------
- Used USBDeview.exe (64 bit), runned as administrator. Performed manual Uninstall for all old virtual COM ports.
- Tried another USB cable.
- Tried another USB port; Tried another USB port on another insernal USB hub; Tried on extranal USB hub.
- Tried another drivers, which I have found on fourms.
- Started Device Manager as admin, show hidden devices. Now I can see m phone as a light gray device.
Every time I plug phone, Windows creates a new VCOM port. I have to uninstall them manually with UsbDeview.
When I click properties on VCOM with/without currently phone attached windows says:
"Device status: Currently this hardware device is not connected to the computer. (Code 45)".
See screenshot: postimg.org/image/o3h86dbzt/
- Googled many times for Code 45 but cannot solve this problem.
- Obviously windows can see MediaTek chipset at least for a while. Tried to connect on turned off phone. Or with
phone started in Recovery mode (Meta mode?) - Power+Volume up. No luck here too.
=== Result: Failed to succeed. Nothing of above can help.
Please, help!
Hello,
after a few days I successfully unrooted & unbricked my LG-D605. I read a lot of articles and asked lot of questions and tried a lot of unsuccessfull ways. Here is my successfull solution.
My PC configuration
HP 650 (2,4 GHZ, 4 GB RAM, 500 GB drive)
OS openSUSE 13.2 64bit - software.opensuse.org
Oracle Virtualbox from oracle official repository - www.virtualbox.org
Downloaded Windows 7 home premium EN 32bit (very important - it was unsuccessfull with xp / 8.1 and czech localization xp / 7 / 8.1) - Windows 7 32-bit Home Premium x86 English on techverse.net
LG-D605 preparation - HARD RESET (form off-state Vol- & Power, when prompted Power, when prompted Power), next off
Needed downloads - tested
LG mobile drivers - attachment
LG Flash tool - attachment
ROM in .bin and LGUP_L9II.dll (extracted from kdz file) - file in google drive
Install process
Unpack and install LG mobile drivers
Unpack and install LG Flash Tool without run it
Overwrite file c:\\lg\lgfllashtool\megalock.dll with file megalock.dll in archive lg-flash-tool.zip
Connect phone in download mode (remove battery - connect phone to usb -> hold Vol+ -> insert battery)
After phone detection and installation in PC run Windows Device Manager and set LG device to port COM41
Run LG Flash Tool
Mark checkbox "Manual" and set in Model Config path to LGUP_L9II.dll and *.tot file (archive extracted kdz)
Click on OK
In PortSetting window leave marked only port 1
Click on Right Arrow
If you see in small window Port 1 "Ready", disconnect phone on 5sec and reconnect (if you on virtualbox, remember on reactivation usb port)
Done
hi, other flash metod is turn phone in download mode, and flash the kdz file with KDZ_FW_UPD.exe.
also downgrade or upgrade firmware very easy, open the software, select tipe 3gqtc, mode diag, open te kdz file, conect the phone in download mode and launch software update.
Note: in windows device manager disable lg modem device.
no problem in win xp.
sorry for my english.
I tried this metod but it gets stuck at 54%, jumps to 100 and it gives me a download failed error. What could it be?
Thanks man! It worked for me.
I had a slightly different configuration though...
Host OS: Fedora 21 64bit
Oracle VirtualBox 5.0
Guest OS: Windows 7 Professional EN 64bit with corresponding VirtualBox Additions installed
Installation of LG drivers and Flash Tool went well. But after connecting phone in Download Mode it took long time time install drivers which ultimately ended with fail - "drivers were not successfully installed" in yellow bubble. But the phone was shown in device manager so I continued.
Another thing is that I do not have enabled reactivation on usb port so I quickly pluged it in manually after phone rebooted. It worked too.
Only bad thing is that now I have Android 4.1 and have to upgrade back to 4.4. But this is much better situation than bricked phone so thanks again.
When I click right arrow, nothing is happening
Hi all,
I have a minix U1 that was wiped (no OS). TWRP is installed and I can boot to it (hold power for 6 seconds).
I am trying to install the stock Minix ROM FW013 (most recent) but when booting into TWRP the USB Burning Tool does not connect to the box. I have tried multiple version of the burning tool, currently have 2.0.8 installed.
Any idea how I can installed the stock IMG ROM?
Having a TWRP recovery installed does not always mean the recovery is working - are you certain it is the right version and that it works for your box?
And I fail to see what the recovery has to do with the burn tool - it should find the box if you use the correct connection and start procedure.
Plus - if the firmware is not for the burn tool but in fact to be used with the recovery then you should be able to flash it with TWRP directly.
I updated TWRP and ensured it was the right version for my unit
Connect procedure is open the burning tool>connect OTG cable>hold power button for 6 seconds from off state to enter TWRP
My laptop makes the USB connected nose but the burning tool doesn't display anything
Minix U1 fw install
Simple way is to start the usb Burn tool on your computer, load the FW image, then select start. Now ensure box is powered off, plug in usb cable to computer and box. Press and hold the power button and listen for the bling bing sound of the usb burn tool on windows, then release the power button, it will load the fw. Make sure you have no other usb dongles or scares in the device. Works for me every time.
Please refer to the manufacturer's official firmware guide to recover your device.
Check official forum of Minix and official guide at: NEO U1 full system image reflashing guide
Hi community.
I have a problem with my Android Box X96 Max Plus with the Amlogic S905x3 Chip.
The problem is that i can't install anything on it. I sign in with my google account and i got Error 403 and error 192 when i tried to install something from the playstore.
So i cleared the data and the cache for the playstore and i tried another account. I also did a factory reset on the box. Nothing works.
After this i tried to install an apk from a usb stick with setting unknown sources "on" but this also didn't work (installation abort).
Next step i downloaded the latest firmware for the box and tried to installed it on recovery mode but the error 21 appeared.
I also tried to flash TRWP in recovery mode (with a usb stick) but the error 21 also appeared.
Do i have to unlock the bootloader first or is the only way to flash a firmware on the box with a flash tool and the connected box on the PC (with)?
Whats wrong with this box or is something wrong with me?
Can you help me?
Thanks
Matthias
hello
i had the same problem the only thing that fixed it is to update firmware but to do that you need to identify your box model first
1-then download latest firmware
2-download and install usb burning tools : https://androidmore.com/download/4004/?dlm-dp-dl-force=1&dlm-dp-dl-nonce=baef81bb4a
3- open the usb burning tools application
4- Click the second option on the top bar to reveal the option for changing the language to english
5- click on the File option and click import image to import your firmware .img file.
6- Make sure to untick the overwrite key box
7-connect your box using male to male usb cable (plug it in the blue usb 3.0) and wait for drivers to be installed
8- unplug your box
9-go back to application and click start
8-connect your box and wait for the flash processes to finish
9-when flash is done unplug your box and click stop close usb burning tools
connect your box to your tv and enjoy
SlamD said:
hello
i had the same problem the only thing that fixed it is to update firmware but to do that you need to identify your box model first
1-then download latest firmware
2-download and install usb burning tools : https://androidmore.com/download/4004/?dlm-dp-dl-force=1&dlm-dp-dl-nonce=baef81bb4a
3- open the usb burning tools application
4- Click the second option on the top bar to reveal the option for changing the language to english
5- click on the File option and click import image to import your firmware .img file.
6- Make sure to untick the overwrite key box
7-connect your box using male to male usb cable (plug it in the blue usb 3.0) and wait for drivers to be installed
8- unplug your box
9-go back to application and click start
8-connect your box and wait for the flash processes to finish
9-when flash is done unplug your box and click stop close usb burning tools
connect your box to your tv and enjoy
Click to expand...
Click to collapse
Thank you for your help
This will be my next step when I get the usb a to usb a cable.
Can you recommend any custom rom for the x96 max plus box?
Thank you in advance.
Beerle said:
Thank you for your help
This will be my next step when I get the usb a to usb a cable.
Can you recommend any custom rom for the x96 max plus box?
Thank you in advance.
Click to expand...
Click to collapse
you need to identify your box model first ( Plus , Plus2 , Plus100, etc )
if you have the 1000Mb Ethernet chip ( RTL8211F ) then you can try SLIMBOX ATV and AOSP last firmware (best one i have tested ):
project slimBOXtv
A project to create firmware for TV boxes and sticks with an Amlogic processor. Amlogic S905X, S905X2, S905X3, S912, S922, S905W, S905W4, S905Y2, S905L (Android 9) Amlogic S905X4, S905W2, S905Y4 (Android 11) slimBOXtv ATV and AOSP are two...
forum.xda-developers.com
I really like the slim box Version but i have another problem.
My internal storage says that I only have 32 GB but i ordered the 4/64gb Version (which also stand on the back of the Box). What's the problem?
ok i have figured out that i had a fake firmware on my box preinstalled when the box arrived. So i unfortunately have a 4/64 gb model.
For the solution in the topic, only flashing another firmware helped.
Kudos to SlamD for the help.
I bought a new Android 11 box tv - X96 max + ultra
box does use AOSP stock firmware from oct. 2022
I am trying to flash a new Slimbox ATV firmware using AML USB burn tool 3.2.0 suite and USB cable and Win 10 64 bit PC
the problem Is that I can't succeed to get appearing from box tv In AML USB burn tool work plot
I have tried to connect It using usb port v2 , v3, with and without original power adapter, pushing boot button, but all I can achieve Is to get box recovery window
I would be glad If someone can advise what to try to get box appearing In AML USB burn tool work plot
sas231 said:
I bought a new Android 11 box tv - X96 max + ultra
box does use AOSP stock firmware from oct. 2022
I am trying to flash a new Slimbox ATV firmware using AML USB burn tool 3.2.0 suite and USB cable and Win 10 64 bit PC
the problem Is that I can't succeed to get appearing from box tv In AML USB burn tool work plot
I have tried to connect It using usb port v2 , v3, with and without original power adapter, pushing boot button, but all I can achieve Is to get box recovery window
I would be glad If someone can advise what to try to get box appearing In AML USB burn tool work plot
Click to expand...
Click to collapse
all i know is you have to use AML_USB_burn_tool, which I have no clue how to use. I actually found your post trying to figure out how to use it.
sas231 said:
I bought a new Android 11 box tv - X96 max + ultra
box does use AOSP stock firmware from oct. 2022
I am trying to flash a new Slimbox ATV firmware using AML USB burn tool 3.2.0 suite and USB cable and Win 10 64 bit PC
the problem Is that I can't succeed to get appearing from box tv In AML USB burn tool work plot
I have tried to connect It using usb port v2 , v3, with and without original power adapter, pushing boot button, but all I can achieve Is to get box recovery window
I would be glad If someone can advise what to try to get box appearing In AML USB burn tool work plot
Click to expand...
Click to collapse
Do Not Apply Power & Do Not Push AV Port Reset Button - Follow exact steps video From 14:33 forward - Good Luck.