Hi, 8 months ago, i flashed custom rom on amazfit bip, i dont liked the new rom, do i decided to recover stock rom, and after flashing first file the amazfit doesn't turn on, black screen but in the mi fit app the watch is discoverable but i can't connect because i can't confirm the pairing on the watch. is there any solution to start the watch?
Grindur said:
Hi, 8 months ago, i flashed custom rom on amazfit bip, i dont liked the new rom, do i decided to recover stock rom, and after flashing first file the amazfit doesn't turn on, black screen but in the mi fit app the watch is discoverable but i can't connect because i can't confirm the pairing on the watch. is there any solution to start the watch?
Click to expand...
Click to collapse
Try to start charging the watch first.
When full try again.
Or you can try to start it, while it still is being charged. Sometime that helps to.
Related
Hello there just bought an Amazfit 2 Stratos went home to pair it with my S8 Galaxy and i scanned the QR code everything was fine my phone recognized it but the watch showed me the QR again i tried 3-4 times again nothing. I went to my iPhone and paired it perfectly also updated the firmware then tried to unpair it from iPhone and test it on S8 again and still nothing happened . It scans the QR code my phone recognize the watch but on the watch screen i still see the QR screen instead of choosing left or right hand.
Thanks in advance.
Hello. Check is the watch is in the phone's BT settings, if it is there then remove and try to pair again. If it's not, try pairing with WiFi off on phone.
lfom said:
Hello. Check is the watch is in the phone's BT settings, if it is there then remove and try to pair again. If it's not, try pairing with WiFi off on phone.
Click to expand...
Click to collapse
Tried both nothing changed.
mixmasterr said:
Tried both nothing changed.
Click to expand...
Click to collapse
Are you using a custom ROM, Oreo-based? Oreo may block some permissions making pairing difficult.
lfom said:
Are you using a custom ROM, Oreo-based? Oreo may block some permissions making pairing difficult.
Click to expand...
Click to collapse
No im using a default one should i install a custom one if yes could you suggest me the best for S8 !
Thanks!
Sorry, I don't know any custom ROM for S8. But if the current one you have isn't 8.0+, then shouldn't be any problem pairing. My last 2 suggestions:
- Look for a Chinese version of Amazfit Watch app (current one is 2.4.0-CN, I think the one in APKMirror is the CN version), if your watch is the model A1609 it may pair only with CN Amazfit app;
- Try pairing with another phone with Android 7.1 or older, if it still doesn't pair then maybe there is a problem with the watch.
mixmasterr said:
Hello there just bought an Amazfit 2 Stratos went home to pair it with my S8 Galaxy and i scanned the QR code everything was fine my phone recognized it but the watch showed me the QR again i tried 3-4 times again nothing. I went to my iPhone and paired it perfectly also updated the firmware then tried to unpair it from iPhone and test it on S8 again and still nothing happened . It scans the QR code my phone recognize the watch but on the watch screen i still see the QR screen instead of choosing left or right hand.
Thanks in advance.
Click to expand...
Click to collapse
I received today my amazfit stratos (1619) and I've got exact the same problem (Samsung S8 with android 8.0.0). I think that we need to wait for the new official update which will support S8...
Just pair watch on any other phone (android 7 and below) and then log in to Amazfit App with the same account, watch should be paired. Worked for me.
Yes, this worked for some people that could not pair using Oreo:
This should work: pair the watch using your account and the other phone, then put watch in airplane mode (so it will disconnect from phone) and uninstall Amazfit app and remove watch from phone's Bluetooth settings (watch won't be unpaired, so no factory reset). Then go to your phone, make sure the watch isn't listed in Bluetooth settings, install the same app version used before, turn off airplane mode on watch and login to your account. The watch and phone should show the usual pair request with a pin code, confirm in both and they should be paired. If it doesn't happen then your phone's Bluetooth cannot see the watch for some reason... I have done this thousands times and it always worked if the phone can find the watch.
Click to expand...
Click to collapse
Recently my Amazfit BIP automatically updated and it stoped being able to connect via bluetooth.
So I tried to reset to factory settings and now the Amazfit is frozen an its screen only shows the icon of connecting the watch to the smartphone, and it's not possible to stop this process.
I've tried to use different apps to connect and although they can find the watch, they are unable to connect.
Have anyone faced a similar situation?
Wait till it drains out en then start it up again. U should see the pair to device icon
Hello,
My Amazfit Bip is bricked on that "Connect APP to update" screen.
With MiFit, my smartwatch is never recognized.
With GadgetBridge, I connect to the smartwatch without any problem.
The smartwatch seems to "work" : I can ask GadgetBridge to have it vibrate, I can get activity etc.
With "Notify & Fitness for Amazfit", I have successfully flashed firmware 1.1.5.16 + GPS + RES (the screen changes to the firmware update screen). However, at the end, it does not reboot and remains stuck on the same Connect APP to update screen. The menu "reboot" or "factory reset" of GadgetBridge does not do anything.
Can someone please help unbrick it?
I would gladly try a more recent English firmware, but I haven't been able to find one. Links on 4pda.ru were down. I downloaded and unzipped a few Mi Fit apk, but they don't seem to have the Mili_chaohu files... etc
Thanks
Give this a try - use N & F to load a custom watchface (it doesn't matter which one).
This fixed my BIP in a similar situation.
Regards,
Eric
Solved after the battery drained
ebsebs said:
Give this a try - use N & F to load a custom watchface (it doesn't matter which one).
This fixed my BIP in a similar situation.
Regards,
Eric
Click to expand...
Click to collapse
Thanks, Eric, I had tried that, but it didn't work. It stayed on the same screen.
However, I solved the issue this morning, because at last the watch ran out of battery (lol ! the battery life is so good I nearly waited 2 months!). So, it was "dead", and then I charged it again, paired it with N & F, and suddenly MiFit took grasp of it, uploaded A-GPS, firmware and resources and after a while the smartwatch is back to life
axlc said:
Solved after the battery drained
Thanks, Eric, I had tried that, but it didn't work. It stayed on the same screen.
However, I solved the issue this morning, because at last the watch ran out of battery (lol ! the battery life is so good I nearly waited 2 months!). So, it was "dead", and then I charged it again, paired it with N & F, and suddenly MiFit took grasp of it, uploaded A-GPS, firmware and resources and after a while the smartwatch is back to life
Click to expand...
Click to collapse
Can you tell me how you fix it? I am in the same situation and I need more information about how you fix it.
Hello there! I hope you can help me, I've been using my bip for almost a year and I was very happy with it. I installed the app notify and fitness and I was using that instead of the mi app, so anyway I regularly installed custom watch faces, long story short I installed a new watch face, my bip got stuck on "updating software" turned off and is not turning on anymore... What can I do?
Try connect it to a charger.
Hi,
Its only been 5 days that i am using my new amazfit GTR 2 watch connected with Oneplus 7pro.
Since yesterday just this is showing on the watch (see attached file)
I just dont understand what to do..
I have tried uninstalling the app.. didnt help. Disconnecting reconnecting via Bluetooth did not help soft reset did not help. Cant hard reset the watch since its showing just this arrow..
Update starts V5.2.11.1 but when it starts it ends after saying UPDATE CANCELLED. MAKE SURE YOU ARE CONNECTED WITH THE APP.
JUST CANT UNDERSTAND WHAT TO DO
See if this thread helps.
Amazfit GTS (important not GTR) - after update boot loop
Hi i have Amazfit GTS i paired it with my Zepp app next i change some settings and app finded new update. After update the watch in "boot loop" mode. I unpair with my app and i would pair agin but the code QR is not show. I cant pair, on screen...
forum.xda-developers.com
Ali52415 said:
Hi,
Its only been 5 days that i am using my new amazfit GTR 2 watch connected with Oneplus 7pro.
Since yesterday just this is showing on the watch (see attached file)
I just dont understand what to do..
I have tried uninstalling the app.. didnt help. Disconnecting reconnecting via Bluetooth did not help soft reset did not help. Cant hard reset the watch since its showing just this arrow..
Update starts V5.2.11.1 but when it starts it ends after saying UPDATE CANCELLED. MAKE SURE YOU ARE CONNECTED WITH THE APP.
JUST CANT UNDERSTAND WHAT TO DO
Click to expand...
Click to collapse
Hi same issue with me .. please inform if u solved this prblm
Were you able to solve it?